PROVN OF 01 X TOILET AND BATHROOM AT MES IB-03 AND SPL REPAIR/REPLACEMENT OF BER COOLING FAN OF DIFFERENT OTM ACCN OF VIJAY DURG UNDER GE(VD) KOLKATA

B/R PORTION Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fix mild steel flat iron 25 x 3 mm as in band, straps, hold fasts etc and similar small articles conforming to Fe-290(Gde E-165) all as specified and directed.

S&F 5.5 mm thick toughened frosted glass fixed in aluminium / Upvc beads (beading included with shutter ) or as in hinge door , partition , windows , automatic doors and similar work including cutting to shape , drilling holes as required complete all as specified and as directed,

S & F solar control film 25 micron reflective type (garware sun control or equivqlent ) complete all as specified and directed .

S&F for 12 mm thick toughned glass as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.

Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as specified and as directed.

Material and labour for brick work with locally available sub class ‘B’, old size, best quality bricks, straight or curved on plan exc 6 m mean radius built in cement mortar ( 1:6) all as specified and directed.

M&L 18-20mm thick granite slab in window cills, cooking platform , wash basin platform, steps of stair case etc and like set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match laid over screed bed 20mm thick in CM 1:4 all as specified and as directed .

Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick or concrete surface finished even and fair all as specified.

M&L 5 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:3 complete all as directed.

Material and labour for providing Reinforced Cement Concrete(1: 2 : 4) type B1 using 20 mm graded aggregate as in beams, cantilever, lintels over 1.5 m all as specified and directed.

Material and labour for providing Reinforced Cement Concrete(1: 2 : 4) type B1 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floor, roof,landing,balcknies, conpies,decks,slab and in shelves and like all as specified and directed

M&L Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed .

M&L for TMT bars 5 mm dia and over upto and including 10 mm dia in stirrups , spacers and binders cut to length , bent to shape required as in reinforcement and binding with MS wire ( annealed ) not less than 0.90 mm dia complete all as specified and directed .

M&L Mild steel TMT bars 6mm and 8mm dia,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed

Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works, not exceeding 200 mm thick (Horizontal or slopping) for rough finished flat surfaces of concrete all as specified and directed.

M& L for anti rustic punch sand finish Vitrified tiles Matte finish (in any shade ) 8 to 10 mm thick Size of tiles shall not be less than 1600 mm x 800 mm , in floor / skirting / dado etc jointed and pointed completed all as directed.

M&L for colour polished vitrified ultra charged tiles for vertical surface 1600 x 800 mm, 8 to 10 mm thick thick set and jointed in 4-5 mm thick layer of suitable tilofix adhesive , coverage area of adhesive approx 8 kg per sqm over finished surface of wall and as directed.

Demolition of cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

M & L 25 mm thick cement concrete as in foor pading type B-0,1:2:4 (12.5mm graded aggregate finished cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L preparation of new ceiling surfaces surfaces and applying two coat of plastic emulsion paint over a coat of primer and 2mm thick wall care putty complete all as specified and as directed.

Material and Labour of Cast iron soil, waste and vent pipe, spun pipe 100 mm bore in any length with or without ears with cement joints fixed on walls with FI clamps and including taking down existing pipe all as specified and directed .(upto 4 th storey).

Material and labour of CI (spun) Bends (any radious) complete all as specified and directed

Material and labour of CI spun Cowl for 100 mm bore pipe complete all as specified and as directed.

Material and labour of CI (spun) Branch pieces, singel (any radiousequal or unequal) for 100 mm bore pipe complete all as specified and as directed.

Supply and fixing of unplasticized (uPVC) of type-A for use in ventilation pipe work and rain water and rain water harvesting, single socket, 110 mm bore in any length including rubber ring joints and fixed to wall with clips, otherstandered material and including taking down old 110 mm dia CI rain water pipe & removed from site all as specified in IS 13592 (upto 4 storey)

Material and labour in repairs of unplasticized (uPVC) bends for 110 dia pipe complete all as specified and directed.

Material and labour in repairs of unplasticized (uPVC) Junctio single T for 110 dia pipe complete all as specified and directed.

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.

Supply, lay and fix 20 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors. all as specified and directed.

Supply and fixing in repair 35mm dia gold line curtain rod alongwith decorative brackets and supporting and rings at a gap of 4" (Make : Vista sher wood) glass fixed with necessary beading complete all as specified.

S&F in repair aluminium door closer hydraulically regulated designation No.3 universal type suitable for door shutter of 851 to 1000mm in width and of weight of 61 to 80 kg (Aluminium (extruded section) body ) all as specified.

Supply, hosting and fix 1000 liters rotational moulded polythene water storage water tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (ISI marked) all as specified and directed.

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(minimum weight 20gms-210gms) complete all as specified and directed.

S&F 10 to 12mm thick gypsum board false ceiling on curved or plain type surface including any sunk or raised moulding including in step design . Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre.Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including applying two coats of plastic emulsion paint over a coat of primer to exposed surfaces incl taking down old one complete all as specified and as directed by Engineer-in-Charge/ Garrison Engineer.

S&F Block boards 18 to 19 mm thick, grade 2 quality, i n t e r i o r grade, commercial type, fixed with screws to timber frame-work( as in cup board) INCL taking down old one complete all as specified and directed.

S&F Decorative laminate type ( 0.9 mm thick) of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S & F Continuous (piano) hinges,SS, bright finish or electrogalvanised, width of flap 30 mm complete all as specified and directed.

S&F brass handel 150 mm long decorative type complete all as specified and directed.

S&F multi purpose cupboard lock complete all as specified and directed.

S&F cupboard magnets heavey duty complete all as specified and directed.

Demolition of RCC of any description and in any position not otherwise specifically provided for .(upto 04 storey High of building)

Material & Labour for applying one coat s of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and incl priming coat of exterior primer applied @ .90 litre/ 10 sqm and 1mm thick wall care putty over new surfaces complete all as specified and directed.

M&L for rendering 15mm thick (10+5 mm) on fair faces of brick work or concrete wall surfaces in CM 1:4 finished rendering is to be finished even and smooth without using extra cement complete all as specified and directed. (Top layer mixed with water proofing compound) (WPC shall be measured seperately)

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed.

S&F for liquid water proofing compound complete all as specified and directed

S & F in repair cast floor trap 100 mm dia with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) with run lead.

M & L Salt-gauged stoneware gully traps, square or round mouthed, type 'P', size 150x150 mm complete all as specified and directed.

S & F ornamental MS framed work such as grills of railing ,gate,gratings etc with end of bars shouldered and revets welded etc framed guard bars barrel iron door ladder framed balusters walk ways,railing, conforming to Fe-290, Gde-E-165,including, complete all as specified and as directed.

S&F in repair CI Nahani trap of 100mm dia, including jointing to waste pipe fixed in cement concrete, (1:2:4) type B1 ( using 20 mm graded crushed stone aggregate) complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building).

S&F CP grating of 100mm dia, fixed with cement mortar (1:3).complete all as specified and as directed by Engineer-in-charge. (upto 04 storey High of building).

S&F fancy type CP Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115 mm Long Bend Pipe, Connecting Legs &Wall Flange complete all as specified and directed. Overhead Shower) screwed for iron pipe including taking down old and all as specified.(Make : Jaquar Cat No. KUP-35125PM).

S&F 15 mm angular stop cock chromium plated with wall flange as all as specified.(Make : Jaqur cat no- KUP-35053PM) or equivalent make specified in tender.

S&F Concealed Stop Cock Regular Body Suitable for 15mm Pipe Line with Spindle Extension & Plastic Protection Cap (without Exposed Parts) and Exposed Part Kit of ConcealedStop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal complete all as specified and directed (Make : Jaqur cat no- ALD-83 and KUP-35083KPM or equivalent make specified in tender.

S&F CP Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange complete all as specified and directed. Make : Jaqur cat no- ALD-769L300x190 or equivalent make specified in tender

S&F CP waste coupling 32mm bore full threaded complete all as specified and directed .( Make : JAQUAR cat No. ALD-705L130 or equivalent make specified in tender

S&F chromium plated Toilet Roll Holder with Stainless Steel Flap all as specified.( Make : Jaquar Cat No: ACN-1153S or equivalent make specified in tender.

S&F Towel Ring Round with Round Flange complete all as specified and directed.Make : Jaqur cat no- ACN-1121BN )(Chrome) or equivalent make specified in tender.

S&F Chromium plated Single Lever Basin Mixer with Popup Waste with 450mm Long Braided Hoses fixed with 15 mm bore iron pipe as in repair etc complete as specified and as directed.Make- Jaquar Cat no-KUP-35051BPM or equivalent make specified in tender.

S&F 15mm bore two way bib cock with wall flange chromium plated complete all as specified and directed. Make : Jaqur cat no- KUP-35041PM or equivalent make specified in tender.

S&F 15mm bore bib cock with wall flange for 15mm bore pipe chromium plated complete all as specified and directed.Make : KUP-35037PM) (Chrome) or equivalent make specified in tender.

S&F 15mm dia Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube and Wall Hook with N.R.V (Back Flow Preventer) complete all as specified and directed.(Make : JAQUAR Cat No.ALD-579 . (chrome) or equivalent make specified in tender.

S&F Soap Dish (Polycarbonate) complete all as specified and directed.( Make : jaquar) Cat No. AQN-7733 (chrome) all as specified.

S&F Soap Dispenser with Glass Bottle complete all as specified and directed. ( Make : jaquar) Cat No. ACN-1135N (chrome) or equivalent make specified in tender.

S&F tumbler holder complete all as specified and directed.( Make : jaquar) Cat No. ACN-1141N (chrome) or equivalent make specified in tender.

S&F robe hook complete all as specified and directed.( Make : jaquar) Cat No. ACN-1191N (chrome) or equivalent make specified in tender.

S&F towel rack with lower hanger and hook 600mm long chromium plated(Chrome) all as specified. Make : Jaquar cat no- AQN-7781 or equivalent make specified in tender.

S&F Special designed glass shelf of size 600mm with CP wall flange all as directed by Engineer-in-Charge(Make :Jaquar cat no- AKP-35771P or equivalent make specified in tender.

S&F corner glass shelf incl takingdown old one complete all as specified and directed.( Make : Jaquar cat No CPA-1173 or equivalent make specified in tender.

S&F connector pipe 450mm long copper connection 15mm dia with nut and rubber brass coupling at both ends for basin and geyser all as directed by Engineer-in-Charge.(Make: Jaquar -ALD-803AB,ALD 805 AB) or equivalent make specified in tender.

S&F vitreous china floor / wall mounted rimless one piece closet (Pedestal pattern), white, including low level vitreous china valveless syphonic action type flushing cistern with inlet ball valve float, push button, flush pipe incl bracket, P/S trap, UF soft close seat cover and connecting fittings complete all as specified and directed. (Make : JAQUAR, Cat No: OPS-WHT-15853S300UF or equivalent make specified in tender.

S&F Maze overhead shower 300 x 300mm square shape single flow (Body and face plate stainless steel) with rubit cleaning system complete all as specified and directed. Make- Jaquar - OHS -1639 , Register design 276017 or equivalent make specified in tender.

S&F CP Shower Arm 400X25X25mm Square Shape for Wall Mounted Showers with Flange complete all as specified and directed. Make : JAQUAR, Cat No: SHA-455L400 or equivalent make specified in tender.

Supply and fix pressure booster pump with 0.50 HP 50-60 HZ,VOLTAGE 220V,single phase,discharge capacity 0-3 m3/hr,25 mm dia delivery pipe(of length 5.00 meter ) pressure switch of dynfos ,pressure dial gauge (ranging from 0 to 100 lbs per square inches) and testing on completion as in repair complete all as specified and as directed by Engineer-in-Charge. Make: Kirloskar - ( D41- B00502041033) or equivalent make specified in tender.

E/M PORTION M & L for concealed type point wiring with 1.50 sqmm (noninal area) FRLS insulated and unsheathed muld stranded copper conductor cable 1100 Volts grade,single core,laid in and including PVC conduit complete with all fittings and accessories, fixed to walls/celling including muld steel terminal boxes 1.25 mm thick conforming to IS - 5133(Part -I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked ) for mounting switches/ regulator / bell push etc including 1.50 Sqmm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade,single core, earth continuity conductor connected to common earth dolly, for one light point / bell point/ ceiling fan / exhaust fan point cotrolled by one way switch complete all as specified and directed.

One light/fan point controlled by one switch

All as per item No 79.01 above but using 4 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 2.5 sqmm green copper conductor as continuous earth wire with lugs complete all as specified and directed.

S&F switch piano flush button type 5 Amp single pole one way complete all as specified and directed.

S&F Switch and socket combination 6 pin 15 Amp AC 230 Volts piano flush button type (multipurpose) complete all as specified and directed

M & L for sub main wiring with 2 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through & including PVC conduit of suitable size in concealed all as directed.

S & F Sheet metal enclosure for MCB DB double door 415V Triple pole & Neutral 4 way with common bus bar complete all as specified and directed.

S & F MCB four pole , 63 Amps with breaking capacity 10kA, complete all as specified and directed

S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus bar complete all as specified and directed

S & F MCB 'C' series SPN 32 Amps, breaking capacity 10KA complete all as specified and directed. Cat No. 408682, of Legrand or equivalent make specified in tender.

S & F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA. complete all as specified and directed.Cat No. 408587 of Legrand or equivalent make specified in tender.

S&F Ceiling rose three terminals polycarbonate , isolated body complete all as specified and directed.

S & F in repair Recess mounting LED 12 Watt Slim round down lighter made of Green Perform sleek is a high ferformance low-height LEDmodern professional workspace. Robust PDC housing ensures long system complete all as specified and directed.Make Philips Cat - DN295B LED10S-6500 PSU WH or equivalent make specified in tender.

S & F in repair LED tube light fitting 10 watt, mirror type /mounted on wall / ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. IP 65 complete all as specified and directed.

Supply and fix exhaust fan heavy duty AC single Phase 230 V / 240V 50 Hz of size 300 mm sweep, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 4.0mm GI wire (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 5 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia light grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.

Taking down ceiling fan 1200 mm to 1400 mm sweep of any make sealing cable ends, dismantling blades , cleaning thoroughly with kerosene oil including filling cavities with filler etc, hanging the ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed .

S & F BLDC ceiling fans of 1200mm sweep with class F copper insulation for winding ,canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

S & F BLDC ceiling fans of 1400mm sweep with class F copper insulation for winding, canopy, fan blades and accessories, BEE 5 Star Rated and connecting up including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 sqmm , 3 core, 1100 Volts grade, from ceiling rose / connector to fan complete all as specified and directed.

Supply and fitting GI pipe tube of size 40 mm medium grade in bldgs for hanging of ceiling fans incl taking down of existing pipe as per specified and directed by Engr- In - Charge.

Supply & fixed in repair MS down rod of size 15/20 mm dia and length 1' for ceiling fan including electric connection, nut, bolt and clamp as in repair complete all as specfied and directed.

Supply & fixed in repair MS down rod of size 15/20 mm dia and length 2' for ceiling fan including electric connection, nut, bolt and clamp as in repair complete all as specfied and directed.

Supply & fixed in repair MS down rod of size 15/20 mm dia and length 3' for ceiling fan including electric connection, nut, bolt and clamp as in repair complete all as specfied and directed.

S&F in replacement of PVC insulated multistranded copper conductor wire, 1.5 Sqmm 3 Core, round flexible for connection of light fittings, complete all as specified and as directed.

Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed .

Materials and Labour for surface type point wiring with 1.50 Sq. mm (nominal area) FRLS-H PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing capping medium duty complete with all fittings and accessories, fixed to walls/ceiling, including mild steel terminal boxes 1.25 mm thick conforming to IS-5133 (Part-I) with 3.0 mm thick plastic laminated sheet top cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLS PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly, for one light point /bell point/ceiling fan/exhaust fan point controlled by one way switch complete all as specified and directed. (a) One light point or one fan point or bell point controlled by one switch or bell push

S & F Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

Supply & fixed in repair Modular stepped type electronic fan regulator, single phase , 2 Module, to be fixed on existing sheet including taking down old unsv complete all as specified and as directed.

S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and directed.

S & F in repair clamp with buckle for hanging ceiling fan including nut and bolts complete set all as specified and directed.

Supply and fixing 100 mm bore galvanized iron pipe (light grade) with all fittings, fixed complete to wall / ceiling or laid in floor incl taking down of old unserviceable GI pipe complete all as specified and as directed by the Engineer-in-charge.

S & F Switch piano,flush type single pole , one way 15 Amp complete all as specified and directed.

Note: Schedule of credit (SCHEDULE OF CREDIT) amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ.

Please Enable Macros to View BoQ information