SPECIAL REPAIR TO WINDOWS AND REPLACEMENT OF EXISTING WINDOWS WITH PRE-PAINTED GI SHEET WINDOWS IN THE OMQS AND SMQS AT AF STN DADRI UNDER GE (AF) FARIDABAD

Amount

Taking down chowkhats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.

Taking down chowkhats or frames n. exc. 1.50 sqm each (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge.

M&L precast cement concrete type-B1 1:2:4 by using 20 mm graded crushed broken stone aggregate, in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings set in cement mortar 1:4 or complete all as specified and directed by Engineer-in-Charge.

S&F for ECO 2000 series Approx size of 1.65 m x 1.2 m (Elixir/NCL SECCOLOR ) Roll framed galvanised prepainted steel section windows section including provision of grills, 4 mm thick glass and SS wiremesh specification and drawing as per CE (AF) WAC, PALAM sheet no -1/2 and 2/2 of drawing no-CEAF/STD-191/2014 etc complete all as specified and directed by Engineer-in-Charge. (a) Fixing details:- rame and shutter frame sections should be cut to lenth and miter joined with poly propylene corner brackets, mullion section should be joined with frame/mullion using nylon mullion cap, ethyl propyllene diamene monomer(EPDM) gasket should be used all around glass in shutter and fixed glass. Rubber gasket should be used aroud the fly mesh to fix mesh in mesh shutter. (b) Accessories:- Each Glazed shutter should be provided with MS powder coated friction hinges, high grade aluminium powder coateed handle -1 for each shutter (c) Glass shutters having fixed glass shall be 4 mm th orion blue (ET725) GLASS, having U value of 3.85 W/sqm K, light transmission factor of 18% and solar radiation factor of 0.23 fo ST Gobin, HNG OR MODIGUARD (d) Windows should be provided with grill made of 10mm SQR. MS Bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. (e) Window frame should be fixed to brick/concrete masonry by using nylons self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. (f) Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per Sqr.inch.

S&F for ECO 2000 series Approx size of 1.5 m x 1.2 m (Elixir/NCL SECCOLOR ) Roll framed galvanised prepainted steel section windows section including provision of grills, 4 mm thick glass and SS wiremesh specification and drawing as per CE (AF) WAC, PALAM sheet no -1/2 and 2/2 of drawing no-CEAF/STD-191/2014 etc complete all specified and directed by Engr-in - charge. (a) Fixing details:- rame and shutter frame sections should be cut to lenth and miter joined with poly propylene corner brackets, mullion section should be joined with frame/mullion using nylon mullion cap, ethyl propyllene diamene monomer(EPDM) gasket should be used all around glass in shutter and fixed glass. Rubber gasket should be used aroud the fly mesh to fix mesh in mesh shutter. (b) Accessories:- Each Glazed shutter should be provided with MS powder coated friction hinges, high grade aluminium powder coateed handle -1 for each shutter (c) Glass shutters having fixed glass shall be 4 mm th orion blue (ET725) GLASS, having U value of 3.85 W/sqm K, light transmission factor of 18% and solar radiation factor of 0.23 fo ST Gobin, HNG OR MODIGUARD (d) Windows should be provided with grill made of 10mm SQR. MS Bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. (e) Window frame should be fixed to brick/concrete masonry by using nylons self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. (f) Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per Sqr.inch.

S&F for ECO 2000 series Approx size of 2.2 m x 1.2 m(Elixir/NCL SECCOLOR ) Roll framed galvanised prepainted steel section windows section including provision of grills, 4 mm thick glass and SS wiremesh specification and drawing as per CE (AF) WAC, PALAM sheet no -1/2 and 2/2 of drawing no-CEAF/STD-191/2014 etc complete all as specified and directed by Engineer-in-Charge. (a) Fixing details:- rame and shutter frame sections should be cut to lenth and miter joined with poly propylene corner brackets, mullion section should be joined with frame/mullion using nylon mullion cap, ethyl propyllene diamene monomer(EPDM) gasket should be used all around glass in shutter and fixed glass. Rubber gasket should be used aroud the fly mesh to fix mesh in mesh shutter. (b) Accessories:- Each Glazed shutter should be provided with MS powder coated friction hinges, high grade aluminium powder coateed handle -1 for each shutter (c) Glass shutters having fixed glass shall be 4 mm th orion blue (ET725) GLASS, having U value of 3.85 W/sqm K, light transmission factor of 18% and solar radiation factor of 0.23 fo ST Gobin, HNG OR MODIGUARD (d) Windows should be provided with grill made of 10mm SQR. MS Bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. (e) Window frame should be fixed to brick/concrete masonry by using nylons self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. (f) Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per Sqr.inch.

S&F for ECO 2000 series Approx size of 1.0 m x 1.0 m (Elixir/NCL SECCOLOR ) Roll framed galvanised prepainted steel section windows section including provision of grills, 4 mm thick glass and SS wiremesh specification and drawing as per CE (AF) WAC, PALAM sheet no -1/2 and 2/2 of drawing no-CEAF/STD-191/2014 etc complete all as specified and directed by Engineer-in-Charge. (a) Fixing details:- rame and shutter frame sections should be cut to lenth and miter joined with poly propylene corner brackets, mullion section should be joined with frame/mullion using nylon mullion cap, ethyl propyllene diamene monomer(EPDM) gasket should be used all around glass in shutter and fixed glass. Rubber gasket should be used aroud the fly mesh to fix mesh in mesh shutter. (b) Accessories:- Each Glazed shutter should be provided with MS powder coated friction hinges, high grade aluminium powder coateed handle -1 for each shutter (c) Glass shutters having fixed glass shall be 4 mm th orion blue (ET725) GLASS, having U value of 3.85 W/sqm K, light transmission factor of 18% and solar radiation factor of 0.23 fo ST Gobin, HNG OR MODIGUARD (d) Windows should be provided with grill made of 10mm SQR. MS Bars welded to at 150 mm centre to centre, 6mm x 12mm MS flat. Total grill unit should be powder coated and fixed to window frame with screws. (e) Window frame should be fixed to brick/concrete masonry by using nylons self expanding caps and driving MS electroplated 80 mm long screws into the caps through frames. (f) Mesh shutter should be provided with a stainless steel 32 gauge fly mesh of 304 grades with 144 holes per Sqr.inch.

M/L for Brick works with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L 15mm thick rendering in cm 1:6 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L 15mm thick rendering in cm 1:4 on fair surfaces of walls finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-Charge.

M&L for applying two coats of cement based paint on walls in different patterns including preparation of new plastered surfaces complete all as specified and directed by Engineer-in-Charge.

M&L for preperation of new plastered surface and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty complete all as specified and directed by Engineer-in-Charge.

Singh Associates

36SHRI RADHEY ASSOCIATES