Construction of Residential school Building for 200 Boys and Girls for Dept of Social Justice at Chikhloli in Tal-Ambernath, Dist-Thane.

Amount

Construction of Residential School Building

Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means

Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means Spec. No.: Bd.A.2 Page No. 259

Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5m.) By Mechanical Means Spec.No.: Bd.A 3 Page No.259. SSR I.No.21.10, P. No.132

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Spec No. : BDA 4 Bd.A.4 Page Number 259 .SSR I.No.21.14, Sr.No.723, P.No.149

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means Spec No. : Bd.A.6, Page No. 260. SSR I.No.21.20, Sr.No.728, P.No.150

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. .Spec. No. As directed by Engineer in harge...SSR I.No.21.22, Sr.No.726, P.No.199

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper . Spec. No. As directed by Engineer in harge. SSR I.No.21.24, Sr.No.728 P.No.199

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.E.4 Page No.289 and B-7, Page No.38 .SSR I.No.24.08, Sr.No.819, P.227

Providing and laying Cast in situ/ Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) . Spec. No. Bd.E.1 Page No. 287.SSR I.No.24.01, Sr.No.816, P.No.226

Providing and laying in situ /Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) . Spec. No.Bd.F.3 Page No. 298 and B.7, Page No.38. SSR I.No.25.11, Sr.No.825 P.No.230

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. : Bd.F.5 Page No. 300 and B.7, Page.No. 38.SSR I.No.25.31, Sr.No.830, P.No.323

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 oftrap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels asper detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) . Spec. No. Bd.F.6 Page No. 300 and B.7, Page No.38.SSR I.No.25.50, Sr.No.835, P.No.234

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) . Spec No.Bd.F.8 Page No. 302 and B.7, Page No.38. SSR I.No.25.70, Sr.No.840 P.No.236

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and laying Cast in situ/Ready Mixcementconcrete M-25 oftrap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No. Bd.F.9 Page No. 303 and B.7, Page No.38.SSR I.No.26.05, Sr.No.845, P.No.239

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and laying Cast in situ/Ready Mix cementconcrete in M-25 of trap / quartzite /granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec.No.Bd. F. 13 Page No. 305 / I.S. 456 (2000..SSR I.No.26.25, Sr.No.852, P.No.241

Ground floor

First floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and rougheningthem if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Spec. No. Bd.F.11 Page No. 304 and B.7, Page No. 38.SSR I.No.26.17, Sr.No.849, P.No.240

Ground floor

First floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Ground floor

First floor

Second Floor

Third Floor

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneissmetal for R.C.C. canopy as perdetailed designs and drawings including steel centering, formwork, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc). Spec. No. : Bd.F.8 Page No. 303 and B.7, Page No.38. .SSR I.No.26.09, Sr.No.847, P.No.239

Ground floor

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite / gneiss/ quartzite metal for R.C.C. arches with skew backs as per detailed design and drawings or as directed including steel centering, plywood/steel formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement, including cover block). Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed) With fine aggregate (Crushed sand VSI Grade) Spec.No. Bd.F.17, Page No. 306. SSR I.No.26.30, Sr.No.860, P.No.245

Ground floor

Third Floor

Terrace floor

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Spec.No. Bd.F.17, Page No. 306. SSR I.No.26.33, Sr.No.860, P.No.245

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etc. complete. Spec. No.As director by engineer in charge and BDG- 2 and 5.SSR I.No.27.12, Sr.No.888 P.No.255

Ground floor

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Ground floor

Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.. Spec. No. Bd.A. 11 Page No. 263. SSR I.No.21.37, Sr.No.740 P.No.201

Ground floor

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in superstructure including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Spec. No. As director by engineer incharge and BDG- SSR I.No.27.15, Sr.No.895 P.No.190

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing Autoclaved Aerated Concrete Block masonary of Ecolite or equivalent make conforming to IS:2185 (Part 3) - 1984 in extra fine jointing mortar of fixoblock of UltraTech or equivalent in Half brick thick wall including striking joints, raking out joints and scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972) Spec. No. BDG Page 190. SSR I.No.27.16, Sr.No.896 P.No.256

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side,fixing in cement mortar 1:3 and curing etc. complete Spec. No. Bd.F. 20 Page No. 307. SSR I.No.26.46, Sr.No.874 P.No.186

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. completeSpec.No.As directed by Engineer in charge. SSR I.No.39.01, Sr.No.1186 P.No.235

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete Spec.No.As directed by Engineer in charge. SSR I.No.39.08, Sr.No.1125 P.No.307

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing Country teak wood Four leaf paneled shutters, 35 mm thick style and rail and 25 mm thick panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete

Ground floor

Providing and fixing in position (as per 1868 / 1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/Running metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/Running metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight o.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box : As directed by Engineer in charge. SSR I.No.39.41, Sr.No.1226 P.No.242

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing in position Colour anodized aluminium fixed window fully glazed of any size as per detailed drawing and as directed by Engineerincharge with all necessary alluminium sections including necessary fixtures and fastening such as 5 mm thick clear float glass etc. complete.

Ground floor

First floor

Second Floor

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior ade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock,chromium plated handles on both sides, and finishing with French Polish etc. complete. Spec. No. BD-T-34 Page No. 499. SSR I.No.39.09, Sr.No.1378 P.No.257

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. Spec. No. : As directed by Engineer in charge. SSR I.No.39.68, Sr.No.1437 P.No.270

Ground floor

First floor

Second Floor

Third Floor

Providing and Fixing 30 MM thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S tubes of 19 guage thickness and, size 19 x 19 mm for styles and 15 x15 mm for the top and bottom rails, M.S frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 mm (+/0.25) thick prelaminated sheet of density 600 Kilogram/cbm ,of size 30mm thickness 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45? angle on either side forming stiles ; and 5 mm thick ,95 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered in 45 on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be falt and 20 mm shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 mm (+/0.25) thick PVC strip of 20 mm width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 mm (+/0.25) thick PVC sheet to be fitted inside the M.S. frame welded/ sealed to the styles and rails with 5 mm (+/0.25) x 30 mm PVC sheet beading on either side and joined together with solvent cement adhesive etc ,10 mm thickness (5 mm (+/0.25) x 2 nos ) 20 mm wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos M.S.powder coated but hinges of size 100 mm x 25MM x 2mm using 32 mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares : As directed by Engineer in charge. SSR I.No.39.47, Sr.No.1233 P.No.244

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing mild steel grill work for windows, ventilators etc.20kg/ sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Spec. No. : Bd.U. 1 Page No. 537. SSR I.No.40.01, Sr.No.1464 P.No.274

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing M.S. grill door 24 kg/ sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil paint ing etc.Spec. No. : As directed by En­gineer in charge. SSR I.No.39.31, Sr.No.1400 P.No.261

Ground floor

Providing and applying plaster with plaster of paris in 6mm thickness to previously plaster surface in all position including preparing the surface scaffolding etc. complete. As directed by Engineer in charge. SSR I.No.32.27, Sr.No.971, P.No.202

Ground floor

First floor

Second Floor

Third Floor

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete.

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out ains and curing for fourteen days scaffolding etc. complete. Spec.No.: Bd.L. 7 Page No. 367.SSR I.No.32.11, Sr.No.1131 P.No.222

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing chicken mesh of 22 gauge, with about 30 cm.width at the junct ion of R.C.C members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete / B.B.masonry and or tying by binding wire etc. complete.Spec No.: As directed by Engineer in charge...SSR I.No.32.26, Sr.No.1146, P.No.223

Ground floor

First floor

Second Floor

Third Floor

Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 Square Metre /Kilogram with two coat using approved chemicals for masonry and concretesurface by brush covering 7 years guarantee on Stamp Papers etc. complete. As directed by Engineer in charge..SSR I.No.31.09 P.No.198

Ground floor

Second Floor

Third Floor

Terrace floor

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. SSR I.No.31.07, Sr.No.936 P.No.198

Ground floor

First floor

Second Floor

Third Floor

Providing water proof bedding for flooring of Bath and WC 25 mm thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etc. complete.

Ground floor

First floor

Second Floor

Third Floor

Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively, VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strctly as per manufacturer's specifitions and as approved by engineer in charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc, washing with water all complete.The contractor shall give guarantee for the performance of SRI and also the durabitity of coating, all complete as per direction of Engineer - in- incharge. Spec. No. : As directed by Engineer in charge. SSR I.No.48.19, Sr.No.1536, P.Bo.393 (SSR 2018-19 GREEN BUILDING)

Ground floor

Second Floor

Terrace floor

Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Spec. No. As directed by Engineer-In- Charge. SSR I.No.33.68, Sr.No.980 P.No.275

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia. bars 3 Nos. And stirrups @ 250 mm c/c and fixing in wall with 6 Nos of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 100 mm. Spec. No. As directed by Engineer in harge. SSR I.No.39.56, Sr.No.1425 P.No.268

Ground floor

Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etc. complete. Spec. No. Bd.M.3 Page No.380.SSR I.No.33.06, Sr.No.982 P.No.273

Ground floor

First floor

Second Floor

Third Floor

Providing Mirror polishing to Kota Stone including using all necessary stones and equipments cleaning, washing etc.complete. For Flooring As directed by Engineer in charge. SSR I.No.33.28, Sr.No.1185 P.No.229

Ground floor

First floor

Second Floor

Third Floor

Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and R.C.C beams or Column, at junction of composite masonry, including scaffolding, finishing, curing etc. complete. Spec. No. As directed by Engineer in charge. SSR I.No.32.37, Sr.No.1157, P.No.225

Ground floor

First floor

Second Floor

Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (oup-B IIA) for ant iskid flooring in required position laid on a bed of 1:4 cement mortar including cement float , filling joint with cement slurry cleaning curing etc. complete.. Spec. No. :Bd. M-12 page No. 385.DSR Item I.No.33.67, Sr.No.1224 P.234

Ground floor

First floor

Second Floor

Third Floor

Providing and laying ceramic tiles having size 30 cm. x 45 cm.confirming to cor responding I.S. for dado and skirting in required position with readymade adhesive mor tar of approved quality on plaster of 1:2 cement mortar including joint filling wi th white/ colour cement slurry cleaning curing etc. complete.. Spec. No. : Bd.M.13 Page No. 386.SSR I.No.33.26, Sr.No.1183 P.No.229

Ground floor

First floor

Second Floor

Third Floor

Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.

Ground floor

First floor

Second Floor

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. Complete. Both side polish

Ground floor

First floor

Second Floor

Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. As directed by Engineer in charge. SSRI.No.33.51, Sr.No.1031, P.No.210

Ground floor

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red /Ocean Brown anite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three ooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Spec No. Bd. M.22 B/ Page No.390.SSR I.No.33.35, Sr.No.1192 P.No.229

Ground floor

First floor

Second Floor

Third Floor

Providing and laying vitrified matt fininsh tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS.15622-2006 (oup Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float , filling joints, curing and cleaning etc. complete. a) Flooring Bd.M.12 Page No. 385. SSR I.No.33.42, Sr.No.1199 P.No.231

Ground floor

First floor

Second Floor

Third Floor

Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete No. Bd.M.12 Page No.209.SSR I.No.33.41, Sr.No.1021 P.No.209

Ground floor

First floor

Second Floor

Third Floor

Ground floor

Providing and Fixing mat finish stainless steel (of 302 ade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/ c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabr icating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use).Spec No.:As directed by Engineer Incharge.SSR I.No.40.08, Sr.No.1471 P.No.275

Ground floor

First floor

Second Floor

Third Floor

Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding if necessary,preparing the surface by thoroughly cleaning oil, ease, dirt and other foreign matter and sand papering as required etc. complete. Spec. No. : As directed by Engineer in charge. SSR I.No.35.21, Sr.No.1269 P.No.239

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and applying 2 Coats of high quality acrylic copolymer matt latex low VOC emulsion paint of approved shadethat gives smooth, flat and washable and durable finishing of approved make. Paint should have good flow levelling property with good colour retention and incan antibacterial property. Paint has to be applied on smooth and uniform surface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property. The work activity should cover all aspects of applying paints from surface preparation, filling to erecting and dismantling of scaffolding, finishing the surface etc as directed by Engineer in charge. Spec. No. : Bd.P.6 Page No. 414 and Preapproval of Superintending Engineer. SSR I.No.48.13, Sr.No.1604 P.No.298 (SSR 2020-21 GREEN BUILDING)

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete.

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63x45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPACwaste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. Spec. No. Bd.V. 30 Page No.565. SSR I.No.41.70, Sr.No.1544 P.No.284

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing Oval Type Under Counter Wash Hand Basin of 420 x 590 x 195mm size with pillar cock, C.P.Angular stop cock, long thread of approved make continental including SS bottle trap of necessary pipe connection up to the outside face of the wall, having Telephonic Black / Colour Granite of 180 mm thick fixed on Black Kadappa Framework, etc. Complete as directed by Engineer in charge. SSR I.No.48.35, Sr.No.1552, P.Bo.397 (SSR 2018-19 GREEN BUILDING)

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing 10 cm PVC nahani trap with at ing etc. complet. Spec. No. BD.V 32 A page 551 and as directed by Engineer in charge. SSR I.No.42.67, Sr.No.1621 P.No.294

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron ating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron ating for the gully trap.. Spec. No. : Bd.V. 38 Page No. 531. SSR I.No.42.02, Sr.No.1556 P.No.286

Ground floor

Providing and fixing Orissa Pan of size 580x445x260 mm with approved make flush valve including trap, C.I. soil and vent pipe upto outside face of wall including 100mm dia. C.I. plug, bend and necessary pipe connection, etc complete. Spec No. As directed by Engineer in charge. SSR I.No.48.38, Sr.No.1555, P.Bo.397 (SSR 2018-19 GREEN BUILDING)

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing white Opal series European type wall-hung, of size 400mmx370mmx575mm with approved make flush valve including soil pipe, vent pipe upto outside face of wall, 100mm dia C.I. plug bend inlet pipe all fittings, cutting & making good walls, floors etc. Spec No.:As directed by Engineer in charge. SSR I.No.48.37, Sr.No.1554, P.397 (SSR 2018-19 GREEN BUILDING)

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing white glazed urinal of series with Pressmatic auto closing valve of having 32mm diameter P.V.C. flush pipe with fitting and flushing of approved make and arrangement including lead soil pipe, lead trap & soil pipe connection upto the outside face of wall etc.complete. Spec No.:As directed by Engineer in charge. SSR I.No.48.31, Sr.No.1548, P.396 (SSR 2018-19 GREEN BUILDING)

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing 15 mm. diameter screw down bib/ stop tap of brass including necessary socket union nut complete. Spec. No.: Bd.V. 8 Page No. 554..SSR I.No.41.40, Sr.No.1514, P.No.281

Ground floor

First floor

Second Floor

Third Floor

Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavat ion,laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.Spec. No. :Bd.V.41, Page No. 573.SSR I.No.42.07, Sr.No.1561 P.No.286

Ground floor

Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete Bd.V.9 Page No.555.SSR I.No.41.43, Sr.No.1517 P.No.281

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.Bd.V.8 Page No.554..SSR I.No.41.41, Sr.No.1515, P.No.281

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete.Spec. No.: As directed by Engineer in charge. SSR I.No.42.52, Sr.No.1417, P.No.268

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres Spec. No. As directed by Engineer in charge. SSR I.No.42.54, Sr.No.1419, P.No.268

Third Floor

Terrace floor

Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess wi th P.V.C. plug,bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly rest ing the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocat ions of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc.complete. (The cont ractor shall give 3 yrs guarantee bond for payment ). Spec No. As directed by Engineer Incharge. SSR I.No.42.87, Sr.No.1641, P.No.296

Ground floor

First floor

Second Floor

Third Floor

Providing and laying in walls/ ceilings/ floors 15 mm dia. medium ade having embossed as ISI Mark galvanised iron pipes of 1.25 kg/ met re necessary fitting remaking good the demolished portion with filling trenches and with primer of ant i-corrosive oil paint , 2 coats complete. Including necessary scaffolding and removing exist ing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No. Bd.V.5 Page No. 551..SSR I.No.43.01, Sr.No.1643, P.No.297

Ground floor

First floor

Second Floor

Third Floor

Providing and laying in walls/ ceilings/ floors 20 mm dia. medium ade having embossed as ISI Mark galvanised iron pipes of 1.63 kg/ met re necessary fitting remaking good the demolished portion with filling trenches and with primer of ant i-cor rosive oil paint , 2 coats complete. Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No. Bd.V.5 Page No. 551..SSR I.No.43.02, Sr.No.1644, P.No.297

Ground floor

First floor

Second Floor

Third Floor

Providing and laying in walls/ ceilings/ floors 25 mm dia. medium ade having embossed as ISI Mark galvanised iron pipes of 2.49 kg/ metre necessary fitting remaking good the demolished portion with filling trenches and with primer of ant i-cor rosive oil paint , 2 coats complete. Including necessary scaffolding and removing exist ing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No. Bd.V.5 Page No. 551. SSR I.No.43.03, Sr.No.1645, P.No.297

Ground floor

First floor

Second Floor

Third Floor

Providing and laying in walls/ cei lings/ floors 32 mm dia. medium grade having embossed as ISI Mark galvanised iron pipes of 3.20 kg/ met re necessary fi t t ing remaking good the demolished por t ion wi th fi lling t renches and wi th pr imer of ant i-cor rosive oi l paint , 2 coats complete. Including necessary scaffolding and removing exist ing pipe line i f necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.. Spec. No. Bd.V.5 Page No.551. SSR I.No.43.04, Sr.No.1646, P.No.297

Ground floor

First floor

Second Floor

Third Floor

Providing and laying in trenches 15 mm dia.heavy ade having embossed as ISI Mark galvanised iron pipes of 1.48 kg/ metre necessary fitting remaking good the demolished portion with fi lling trenches and with primer of anti-corrosive oil paint , 2 coats complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. :Bd. V. 5 Page No. 551..SSR I.No.43.09, Sr.No.1651, P.No.298

Ground floor

Providing and laying in trenches 20 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes of 1.93 kg/ metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats complete. Including removing exist ing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. :Bd. V. 5 Page No.551. SSR I.No.43.10, Sr.No.1652, P.No.298

Ground floor

Providing and laying in trenches 25 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes of 3.01 kg/ met re necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-cor rosive oil paint , 2 coats complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. :Bd. V. 5 Page No. 551..SSR I.No.43.11, Sr.No.1653, P.No.299

Ground floor

Providing and laying in trenches 32 mm dia.heavy grade having embossed as ISI Mark galvanised iron pipes of 3.89 kg/ metre necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint , 2 coats complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No. :Bd. V. 5 Page No. 551..SSR I.No.43.12, Sr.No.1654, P.No.299

Ground floor

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec.No.: BD.V 5 page 551 and as directed by Engineer in charge. SSR I.No.42.55, Sr.No.1609, P.No.292

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc.complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete. Spec.No.: BD.V 5 page 551 and as directed by Engineer in charge. SSR I.No.42.57, Sr.No.1611, P.No.293

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge. SSR I.No.42.58, Sr.No.1612, P.No.293

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing on walls/ ceiling/ floor 20 mm dia. CPVCpipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec. No.: BD.V 5 page 551 and as directed by Engineer in charge. SSR I.No.42.56, Sr.No.1610, P.No.293

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing on walls / ceiling/ floor 40 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Spec.No.: BD.V 5 page 551 and as directed by Engineer in charge .SSR I.No.42.59, Sr.No.1613, P.No.293

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing 20 mm thick superior veneer board pelmet box 150 to 200 mm wide to doors or window frames including 20mm dia. Aluminium curtain rod with sockets and finishing with french polishing (without top)etc. complete. Spec. No.: as directed by Engineer in charge .SSR I.No.37.14, Sr.No.1121, P.No.222

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing chromium plated towel rod 16 mm. diameter and 75 cm. in length including all accessories complete. Spec. No. : As directed by Engineer in charge. SSR I.No.42.31, Sr.No.1585, P.289

Ground floor

First floor

Second Floor

Third Floor

Providing and Fixing half turn 25 mm dia gun metal flushing cock including all accessor ies etc. complete.Spec No.:As directed by Engineer in charge. SSR I.No.42.32, Sr.No.1586, P.289

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing push cock (Self closing tap) symet type of 15 mm dia. including necessary socket, testing etc. complete. Spec No.:As directed by Engineer in charge. SSR I.No.41.54, Sr.No.1528, P.282

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing 450mm x 550mm size super ior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.Spec No.:As directed by Engineer in charge.. SSR I.No.42.20, Sr.No.1574, P.288

Ground floor

First floor

Second Floor

Third Floor

Providing patti / band 75mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete Spec. No. Bd.L. Page No. SSR Sr.No.1143 / I.No.32.23, P.No.223

Ground floor

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete.Spec No.:As directed by Engineer in charge. SSR I.No.43.25, Sr.No.1667, P.301

Ground floor

Providing patti / band 100mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete. Spec. No. As directed by Engineer in charge. SSR I.No.32.24, Sr.No.1144, P.No.223

Ground floor

Providing patti / band 150mm wide on plastered surface 12 mm to 15 mm thick in C.M. 1:3 line and level including neat finishing scaffolding curing etc. complete.Spec. No. : As directed by Engineer in charge. SSR I.No.32.25, Sr.No.1145, P.No.223

Ground floor

Providing fine cement finish 1.5 mm thick over green plaster surface including scaffolding curing etc. complete. Spec. No. As directed by Engineer in charge. SSR .No.32.21, Sr.No.965, P.No.202

Ground floor

Providing and fixing 25mm diameter water meter with non-return valve including strainer , sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber]. Spec. No. :Bd.V.7 Page No. 554.SSR I.No.41.28, Sr.No.1502, P.Bo.280

Ground floor

Providing and fixing 90 cm x 60 cm granite plate enaving 10 cm.height letter , figures including painting the lefters/ figures with approved colour and shade complete. Spec. No. Bd.W.7 Page No.586. SSR I.No.44.12, Sr.No.1693, P.No.305

Ground floor

Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted / welded connections without connecting plates, braces etc. and including one coat of anticor rosive paint and over it two coats of oil painting of approved quality and shade etc. complete. Spec. No. Bd.C.2 Page No. 275. SSR I.No.23.01, Sr.No.816, P.No.174

Third Floor

Terrace floor

Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52

Third Floor

Providing and constructing Brick Masonry Inspect ion Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry,plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete.. Spec. No. :Bd.V.43, Page No. 574..SSR I.No.42.13, Sr.No.1567, P.No.287

Ground floor

Providing and laying 100 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete. Spec. No.:Bd.V. 39 Page No. 573. SSR I.No.42.03, Sr.No.1557, P.No.286

Ground floor

Providing and laying 150 mm dia salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying,joint ing (including excavat ion and refilling the t renches) complete.. Spec. No. :Bd.V. 39 Page No. 573..SSR I.No.42.04, Sr.No.1558, P.No.286

Ground floor

Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundat ion, 1:2:4 C.C.channels/ half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block,brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 kg. etc complete. Spec. No. Bd.V. 44 Page No. 5745. SSR I.No.42.15, Sr.No.1569, P.No.287

Ground floor

Providing and constructing Brick Masonry Inspect ion Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry,plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140 kg with frame etc complete. Spec. No. : Bd.V. 43 Page No. 574. SSR I.No.42.12, Sr.No.1566, P.No.287

Ground floor

Providing and laying shoulder drain of trap rubble of 0.45 x 0.45 meter section at 45 degree angle to the road edge including hand packing, filling voids with sand/shingle of approved quality and ramming etc. complete as desired.Sep No. as directed By Engineen In Charg.SSR I.No.8.27, Sr.No.371, P.No.77

Ground floor

RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depth percolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side filling around outside of RCC rings (annular space) with 40mm size boulders including filling of percolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravels followed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washed river fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) including netlon mesh between each gravel/fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) media layer including covering with RCC slab, manhole frame & cover, PVC rungs etc. including arrangement for inlet & outlet pipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge Spec. No. As directed by Engineer in charge. SSR I.No.48.46, Sr.No.1637, P.No.302

Ground floor

Providing and fixing 40 mm. dia Ball cock medium type with PVC float including sockets and necessary fittings and tested as per municipal requirements etc. complete. SSR I.No.42.36, Sr.No.1401,

Ground floor

Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. Spec No.:As directed by Engineer in charge.. SSR I.No.48.29, Sr.No.1620, P.300 (SSR 2020-21 GREEN BUILDING)

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing C.P. a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.:As directed by Engineer in charge.. SSR I.No.48.39, Sr.No.1630, P.301 (SSR 2019-20 GREEN BUILDING)

Ground floor

Providing and fixing 45 cm wide mild steel ladder of 40mm x 6 mm mild steel flat stringers and steps of 18 mm dia. mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60cm x 30cm x 30cm and painting the ladder complete. (Anti Corossive Paint)

Third Floor

Supply and Installation of translucent roof with DPI Flux standing seam multicell polycarbonate panel system. The system with complete assembly of co extruded UV protected multicell panels incorporated into a complete system. Co-extruded UV protected polycarbonate panel system of min 12 mm thick of 900 mm (min.) width with angular daylighting concept. Panels shall have minimum six layers with truss bridge design for higher flexibility & strength. Panels with all fixing accessories to ensure best performance for wind uplift, vibration, oil canning and visual appearance. Panels shall be manufactured with vertical standing seam at both sides of the panel. Panels shall be fixed on Purlin with snap on connectors with double tooth grip lock locking mechanism and will be secured on MS structure (will be paid Separately) with 3 numbers self-drilling screws & trapezoid SS fasteners holding the base of the standing seam offering best stability having a pull-out load of min. 7000N (7KN) tested as per ISO 6892:1998 and IS 1608: 2005, as per design requirement. Panels must satisfy Dart drop impact test as per IS 14443-97 shall show no sign of breakage on Polycarbonate sheets which have been exposed to UV for a min. of 500 Hours as per ASTM G 155. Panels shall not have Yellowness Index as per ASTM D 1925 of 15 units when tested on a sample exposed to UV for 500 Hours as per ASTM G 155. U value shall not be more than 1.6 W/m2K as per EN ISO 10077-2:2018. Panel shall be with additional End cap/Aluminium U/F profile/ Glazing Bar for ends as required. Panel shall be fixed over MS structural steel/MS purlin (paid separately) conforming to the detail technical specifications as per approved architectural drawings. Trained and factory authorized labour with supervision to complete the entire panel installation as per drawing & direction of the engineering in charge. Colour: As per Approval. Approved Make: FLUX by DPI Daylighting or approved equivalent The 12mm thick panels shall be used for a roofing height of upto 15 mtrs.

Third Floor

Terrace floor

Providing expansion joints in R.C.C. framed structure (interior column) with plain premoulded filler 25 mm thick including fixing T.W. battens on both faces and finishing as directed etc. Complete. Ssr30.01

Ground floor

First floor

Second Floor

Providing expansion joints in R.C.C. framed structure (exterior Columns) with plain premoulded filler 25 mm thick and 3 mm thick alluminium plate, hold fast, fixing T.W. battens on internal face, finishing etc. complete as directed. ssr30.02

Ground floor

First floor

Second Floor

Providing expansion joints in R.C.C. framed structure (at floor level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bitumen poured filler and fixing T.W. battens on rear faces etc. complete as directed. ssr30.03

Ground floor

First floor

Second Floor

Providing expansion joints in R.C.C. framed structure (at terrace level) with premoulded filler 25 mm thick and 3 mm thick aluminium plate as required, bituminous poured filler, fixing lead, flashing on upper side and T.W. battens on inner face finishing etc. Complete as directed. ssr33.04

Terrace floor

Supplying and fixing in position Colour anodisized Aluminium four track sliding windows with outer frame made from section of over all size 122 mm x 45 mm, bottom section with drain section track weighing 1.83Kilogramper metre and top and side section of size 122x 31.75 mm weighing 1.15Kilogramper running metre with shutter sections made of 18 mm x 40 mm size having average weight of 0.6Kilogramper running metre (or as required size) with change in proportionate weight, with 6 mm float glass in three equal panels and alluminium coated stainless steel mosquito net in one (2/3 of opening) panel fixed with new neoprene gasket, shutters to be provided with nylon encased stainless steel rollers, necessary locks and handles complete. SSR 39.45

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 m x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150Kilogramcapacity , having heavy duty concealed lock, necessary beading,glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials ,labours, and equipment etc.Completer

Ground floor

Providing and fixing cold rolled steel hollow door frame 105mm x 60mm for anysizes including hold fast hinges, tie members with red oxide and gray paint etc. complete as per I.S.I. specifications and code of practice prescribed including anticorrosive treatment as directed by the engineer.SSR 38.49

Ground floor

First floor

Second Floor

Third Floor

Providing internal cement plaster 6 milimetre thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete

Ground floor

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

First floor

Second Floor

Third Floor

Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.SSR 33.56

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing in required position skirting or dado of Polished kotah Stone slab 25 mm to 30 mm thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing, rubbing, polishing and cleaning complete.

Ground floor

First floor

Second Floor

Third Floor

Providing and Laying factory made coloured chamfered edge Cement concrete grass paver blocks of required strength,thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine fine aggregate (natural sand/crushed sand VSI grade finely washed etc.), compacting and proper embedding/laying of inter locking paver blocks into the fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and cutting of paver blocks as per required size and pattern, finishing and sweeping extra fine aggregate (natural sand/crushed sand VSI grade finely washed etc.) and complete as per manufacturer spsecifications & direction of Engineer-in-Charge. 60mm thick CC paver block of M-35 grade concrete with approved colour and design & pattern. Spec. No. : As directed by Engineer in charge. SSR I.No.48.06, Sr.No.1523, P.Bo.387 (SSR 2018-19 GREEN BUILDING)

Ground floor

Providing and applying priming coat over new wood and wood based surfaces, including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting, scaffolding etc. complete.

Ground floor

First floor

Second Floor

Third Floor

Terrace floor

Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete.Spec. No.: As directed by Engineer in charge .SSR I.No.43.26, Sr.No.1668, P.No.301

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing shutter to wall cupboard made from 19 mm thick Teak particle board with approved coloured laminated face 1.5 mm thick bonded wi th phenol formaldehyde synthet ic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oi l pr imer coat etc. complete. (Excluding cupboard frame). Spec No.:As directed by Engineer in charge. SSR I.No.37.21, Sr.No.1315, P.243

Ground floor

First floor

Second Floor

Third Floor

Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.Spec No.:As directed by Engineer in charge. SSR I.No.33.20, Sr.No.1000, P.No 207

Ground floor

First floor

Second Floor

Third Floor

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete.Spec No.:As directed by Engineer in charge. SSR I.No.43.25, Sr.No.1667, P.301

Ground floor

Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) .Bdv.SSR I.No.41.78, Sr.No.1363, P.No.262

Ground floor

Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. SSR I.No.42.78, Sr.No.1443,

Ground floor

Providing and fixing during laying in RCC Slab rectangular 2 milimetre thick M.S. sheet fan hook box of size 180x100 mm with required depth with holes or notches as required, bottom and top sides of 1.6 mm M.S. sheet fixed with 3.5 mm dia. round headed screws together with 12 mm dia. M.S. bar bent to shape with hooked ends for fan hook and painting to exposed surface

Ground floor

First floor

Second Floor

Third Floor

Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick-bats.

Ground floor

Supply and Fixing of semi unitized structural Glazing system with Alluminium Frame to be done in 114x57x1.5 mm thick for mullion and transome to be done in 63x57x1.5 mm thick panel section to be used for glass panel with 15/20 micron colour anodizing double side spacer tap to be used fixing of glass to alluminium dow comeing 995 structure silicon shall be used weather silicon EPDM and which shall be claded with 6 mm thick blue tinted toughened Glass to used MS bracket for mullion fixing SS Nut bolt MS ancher

Terrace floor

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Bd.A.1 Page No. 259

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc.complete.Bd.A.12 Page No. 264

Providing and laying in situ cement concrete of M10 proportion with trap/ granite/ quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum rtype mixer with SCADA with natural sand) CD.3 Page.No. 160

Providing and casting in situ PCC M15 grade of trap metal for cast in citu head walls for Gutter wall Works including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer with SCADA with crushed sand) BdE7

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing and laying in situ M20 controlled cement concrete of trap/ granite/ quartzite/ gneiss metal for RCC work in solid/ deck slab etc. including ramming, vibrating, curing, formwork, centering and finishing in cement plaster excluding reinforcement etc. complete. (height up to 4 meter with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer with natural sand) BR.38(a) Page No. 135 and B. 7, Page No.38

Providing and fixing in position TMT ­ FE ­ 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. a) For TMT Fe 415 steel bars ( If Mild Steel/HYSD steel is to be used prior permission from S.E. should be taken )Bd.F.17, Page No. 306

Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (160 kg) As directed by Engineer in charge.

Disposing of dismantled material & debries up to 5 km lead beyond the building.

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) Bd.A.1 Page No. 259

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary bac filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) Bd.A.2 Page No. 259

Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge.

Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand Bd. E. 1 Page No. 287

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork ,cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.3 Page No. 298 and B.7, Page No.38

Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.5 Page No. 300 and B-7,Page No 38.

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Bd.F.6 Page No. 300 and B.7, Page No.38

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Bd.F.17, Page No. 306

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. Bd.A.10 Page No. 262

Disposing of excavated material up to 5 km lead beyond the working area.

Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No. 315

Providing and laying Cast in situ/Ready Mix cement concrete M- 15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) Bd.E. 3/Page No. 288/I.S. 456 (2000)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days an keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No. 369

Providing and fixing 50 mm. dia. medium class G.I.pipe gate with wicket gate of approved drawing with all fixtures and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting, bending, making holes and with one coat of primer etc. complete. As directed by Engineer in charge.

Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Spec.No.: Bd.O.8/Page No.406

Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (including primer coat) etc. complete. Bd.O.5 Page No. 405

Providing earth work in embankment with approved materials obtained from other sources upto lead of 50m. including all lifts, laying in layers of 20cm. to 30cm. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete ( Material obtained from Other sources) MORTH 305

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. MORTH 601

Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. MORTH 602

A ) Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated with anticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C and wherever directed including handling, straightening, necessary cutting supported by TMT FE 500, chairs with proper alignment by using properly designed assembly of Bulkheads lubricating half length with bituminous paint as directed etc. complete.

B) Providing and Fixing in position TMT EE 500 tie Bars preavated with anticomsive epoxy point of 12mm dia. 70 Cms long 30.00 cm qc and where directed including handing straigntening wrapping with paper of approved puding for helf length necessary cutting handing straihening of TMT EE 500 chairs with proper aligemnet etc.Complete

Providing to contraction joints polysuphide sealent (Pouring grade) confirming to BS : 5212 - 1989 into sawed groove widened at top for sealent reservoir of specified size and shape as per detailed drawing including fixing Polyethylene foam backer rod of required diameter (appraox. 25% larger than the initial 3 mm.to 4 mm. joint) overlaid with bond breaking tape as per detailed drawing. Item includes cleaning the joints with water jet / air compressor and allowing joint to become thoroughly dry before sealent is applied and applying primer. (A) Contraction and longitudinal joints (15 mm. deep x 8 mm.wide)

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concrete pavement including all materials and labour complete.

Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Bd.V.41, Page No. 573

Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. .in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge.

Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete.

Royalty for Sand

Royalty for HB and Murum

Carrying out basic tests on cement for standard consistancy, Fineness, Specific gravity, Setting time (Initial and Final), Compressive strength, Soundness. Spec. No. As directed by Engineer in Charge. SSR I.No.1 P.No.360

Carrying out basic tests on Sand for Fineness modulus,Silt and clay content.Spec.No.As directed by Engineer in Charge.SSR I.No.11 P.No.360

Carrying out basic tests on Sand for chloride and sulphate content.Spec.No.As directed by Engineer in Charge.SSR I.No.12 P.No.386

Carrying out basic tests on Aggeregates for Water absorption,specific gravity.Impact value,crushing value.Spec.No.As directed by Engineer in Charge.SSR I.No.2 P.No.360

Carrying out basic tests on Aggeregates for Sieve Analysis.Spec.No.As directed by Engineer in Charge.SSR I.No.3 P.No.360

Carrying out basic tests on Concrete for Mix design.Spec.No.As directed by Engineer in Charge.SSR I.No.21 P.No.387.

Carrying out basic tests on Concrete cubes for compressive strength.Spec.No.As directed by Engineer in Charge.SSR I.No.20 P.No.387

Carrying out basic tests on Bricks for water absorptio,Efflorescence, compressive strength.Spec.No.As directed by Engineer in Charge.SSR I.No.13 P.No.538.

Carrying out basic tests on Vitrified Tiles for water absorption,modulus of rupture.Spec.No.As directed by Engineer in Charge.SSR I.No.16 P.No.538

Carrying out basic tests on T.M.T.Steel (Bar testing above 16 mm) for Tensile strength,% Elongation,Yield stress,Weight /m,Bend/rebend test.proof test.Spec.No.As directed by Engineer in Charge.SSR I.No.78 P.No.541

Carrying out basic tests on T.M.T.Steel (Bar testing upto 16 mm) for Tensile strength,% Elongation,Yield stress,Weight /m,Bend/rebend test.proof test.Spec.No.As directed by Engineer in Charge.SSR I.No.77 P.No.541

Carrying out basic tests on Concrete paving block for Comp.strength, Water absorption,Flexural test,Resistance to wear.Spec.No.As directed by Engineer in Charge.SSR I.No.27 P.No.539

Carrying out basic tests on stone/rubble for Crushing value/Comp.strength,water absorption and specific avity .Spec.No.As directed by Engineer in Charge.SSR I.No.28 P.No.539

Carrying out basic tests on soil/Murum for sieve analysis .Spec.No.As directed by Engineer in Charge.SSR I.No.29 P.No.539

Carrying out basic tests on soil/Murum for liquid limit and plastic limit .Spec.No.As directed by Engineer in Charge.SSR I.No.30 P.No.539

Carrying out basic tests on wood for density and moisture content .Spec.No.As directed by Engineer in Charge.SSR I.No.59 P.No.540

Carrying out basic tests on flush door for knif test, adhesion test and end immersion test .Spec.No.As directed by Engineer in Charge.SSR I.No.60 P.No.540.

Carrying out basic tests on aluminium section for thickness, mass per running meter .Spec.No.As directed by Engineer in Charge.SSR I.No.66 P.No.541.

Carrying out basic tests on G.I.Pipes for wt. per running meter, dia.of pipe and wall thickness of pipe .Spec.No.As directed by Engineer in Charge.SSR I.No.71 P.No.541.

Carrying out basic tests on PVC.Pipes for wt. per running meter, dia.of pipe and wall thickness of pipe .Spec.No.As directed by Engineer in Charge.SSR I.No.70 P.No.541.

Carrying out basic tests on paint for reflectance and yellowness index .Spec.No.As directed by Engineer in Charge.SSR I.No.81 P.No.541

Carrying out basic tests on paint for softening point .Spec.No.As directed by Engineer in Charge.SSR I.No.83 P.No.541

Carrying out basic tests on granite for water absorption,specific avity.Spec.No.As directed by Engineer in Charge.SSR I.No.15 P.No.538

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC box trunking of size 50x50 mm. with accessories on wall/ceiling as per

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other

Supplying & erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-

Supplying & erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other

Supplying & erecting mains with 1x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type Two way switch 6A / 10A (2 Module), duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 modules duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 12 modules duly erected.

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity having ISEER minimum 4.50 suitable to operate on250V, 50 cycles, A.C. supply having 1 no of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condensor at position. specification no.APAC/ SAC

Supplying, installing, testing and commissioning split type variable speed Inverter technology room Air conditioning unit 1.5 TR capacity having ISEER minimum 4.50 suitable to operate on250V, 50 cycles, A.C. supply having 1 no of air handling unit hiwall / floor mounting type complete with refrigerant R410 A/R32 and copper condensor at position. specification no.APAC/ SAC

Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Wiring for plug on board with modular Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Point wiring of light and fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying & installing UTP networking cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. WG-COC/NC complete.

Supplying and fixing 3 meter length, UTP patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying and erecting FR grade, pvc armoured multimode optical fibre cable with 6 fibres, with core dia 50/125 µm (OM3) suitable for 1 gbps ethernet distance at 850 nm of wavelength, on wall/ceiling or laid in provided pipe/trench as per specification No. WG-COC/OFC LSZH

Supplying, fixing, and configuring broadband ADSL router with all accessories, on provided rack or as directed as per specification No. WG-NWC/ADSL

Supplying, fixing, and configuring ethernet managed ethernet switch of 24 ports with 2 SFP + 2 combo port and web view/CLI on provided rack or as directed as per specification no. WG-NWC/GBS

Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS/PP

Supplying and fixing tool-less Information Outlet (Ethernet) flush/surface type in provided modular box as per specification no. WG-NAS/IO

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying and fixing power over ethernet adaptor to provide DC supply to Ethernet devices as per specification No. WG-NAS/PEA

Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size

Supplying and erecting highbay LED fitting IP 65 with lamp 70W-80W, PF >0.95 duly connected complete with accessories as per specification no. FG-ODF/LED

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts, plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF

Supplying & fixing anchor type fastener fan hook, with 2 nos. of 10 mm dia x 75 mm long with necessary materials for ceiling fan.

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying, installing, testing and commissioning of 1400 VA to 1600 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries)

Supplying and erecting 12 V/200Ah tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete

Supplying and erecting triple pole metal clad HRC fuse switch 415V, 300-320 A with neutral link with HRC fuses, on angle iron / GI frame as per specification no. SW-SWR/TPHRC.

Supplying and erecting four pole metal clad ON LOAD change over switch 415V,320A erected on angle iron /GI frame complete.

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying and erecting LED street light fitting suitable for above 70W- 75W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS2

Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB .

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB .

Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 63A as per specification no SW-RCCB/RCBO

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB NOTE-1

Providing & erecting 4 Pole MCCB of 250A,415V capacity with short circuit rating 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole upto 100A MCCB complete. (set of 6).

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole upto 250A MCCB complete. (set of 6)

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for upto 250A MCCB complete.

Supplying and erecting hylam sheet/ ebonite 6 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing & erecting floor / wall mounting, MCCB panel board with door suitable for four pole incoming 250A, 8 ways Four pole outgoing upto 100 A MCCB's on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S)

Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door of 250A incoming and 8 way outgoing or 400A incoming and 6 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB complete.

Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP .

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP. 25x5 mm (20mtr x1.00 kg/m) =12 kg.

Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE

Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT

Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 Kv

Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no.OH-PL/OPL.

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, erecting & terminating XPLE armoured cable 4 core 16 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. Rod complete with all materials as per specification no. EAEP.

Supplying and erecting LED street light fitting suitable for above 70W- 75W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS2

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm F.R solid copper PVC insulated green colour wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated green colour wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Wiring for plug on board with Modular type Switch socket with copper wiring and earthing as per specification No:WG-PW/SW

Point wiring for light/bell in 20 mm rigid PVC conduit with 1.5 (2+1E) sq.mm FR grade Copper wire with Modular type switch and required accessaries as per specification No: WG-PW/SW

Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB ( For Capacitor)

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB

Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame.

Supplying and erecting Hylam sheet/ Ebonite 6 mm thick for covering wall entries including cutting drilling and fixing with nut bolts / screws etc. complete. [1 x 1sq.mtr ]

Supplying and erecting Iron work with Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority .[For angle iron Frame: 10 Mtr x 3 Kg/mtr =30 Kg ]

Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & terminating PVC armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting ISI mark GI pipe 65 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

Providing earthing with Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). (25x5 MM : 12 Mtrs x1 Kg/mtr = 12 Kg ]

Supplying and erecting submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 36 to 18 m and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 29 m head & 680 Itr discharge) & pipe of Suction 75 mm/Delivery 65 mmdiameter erected with necessary H type clamps as per specification no. WP-OSP

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Supplying and erecting 525 V 3 phase, 50 Hz., APP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee

Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 40A erected on angle iron / GI frame complete. .

Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting ISI mark G.I. pipe 50 mm. dia ‘C” class position with accessories. As per specification No. CW-PLB/GP

Supplying and erecting ISI mark G.I. pipe 75/80 mm dia ‘C” class position with accessories. As per specification No. CW-PLB/GP.

Supplying and erecting non return valve 65 mm dia in position made of gun metal complete.

Supplying and erecting 65 mm dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting CI flange 65 mm. dia with necessary nuts bolts and washers with rubber seal in position complete.

Supplying, erecting and commissioning of diesel generating set with alternator of 100 kVA output continuous rating, 3 Phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 82.5 kVA upto 100 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Providing round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.

Providing floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.

Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV

Providing cement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm. stone metal duly plastered with necessary curing for pole muffing or any other purposes. SIZE -4*2.15*1.0 = 10 cu.mtr

Excavating soft Murum/Soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good. SIZE -4*2.15*1.0 = 10 cu.mtr

Supplying, erecting & terminating XLPE armoured cable 4 core 50 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP.

Providing earthing with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting copper strip of required 20x5mm size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP). (2runs x 10 mtr long each x 0.886Kg/mtr= 17.72 Kg Say 18.00 KG

Supplying and erecting G.I. strip of 20x5 size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). (4 runs x 10 mtr long each x 0.79Kg/mtr= 31.60 Kg . Say 32.00 KG

Booster Pump of 900 LPM at average 40 m Head, 12.5 HP either Monoblock or of suitable HP with suitable Stages

Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG

Supplying and installing pressure switch with 12/15 mm Ø isolation valve, G.I. nipple, elbow etc. in an approved manner as per specification No. FF-FFA/PS

Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 100 mm dia with necessary fittings as per specification no.FF-PP

Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 75/80 mm diawith necessary fittings as per specification No. FF-PP

Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 25 mm dia with necessary fittings as per specification no.FF-PP

Providing coating of Bitumen Paint & 4mm thick Wrapping for underground 100 mm Ring Main of Fire Fighting System

Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV

Supplying and installing double flange NRV of size 75/80 mm dia as per specification No. FF-VL/NRV

Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV

Supplying & Installing cast iron double flange butterfly valve of size 75/80 mm dia. as per specification No. FF-VL/BFV

Supplying & Installing 20/25 mm dia Gun Metal air release cock, with necessary G.I. Coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV.

Supplying & installing gun metal gate valve of size 20mm dia as per specification No. FF-VL/GV

Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GV

Supplying, erecting & terminating PVC armoured cable 4 core 4 sq mm aluminium conductor with continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning FR, XLPE armoured cable 4 core 1.5 sq.mm. copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU

Supplying, installing, testing and commissioning of 8 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories complete as per specification no. FF-FAAS/FACP NOTE

Supplying, installing, testing and commissioning heat detector complete on box as per specification no. FF-FAS/HD

Supplying, installing, testing and commissioning optical type smoke detector complete on box as per specification no. FF-FAS/SD

Supplying, installing, testing and commissioning manual call point (Pill box) with break glass push button in metal enclosure complete as per specification no. FF-FAAS/MCP

Supplying, installing, testing and commissioning hooters with CRCA enclosure complete as per specification no. FF-FAAS/HTR

Supplying, installing, testing and commissioning remote response indicators complete as per specification no. FF-FAAS/RRI

Supplying, erecting, testing and commissioning amplifier 120 W for public address system suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA/AFR

Supplying, erecting, testing and commissioning sound column 15 Watts complete as per specification no. FF-PA/SOC

Supplying, erecting, testing and commissioning microphone complete as per specification no. FF-PA/MIC

Supplying, erecting, testing and commissioning stand for microphone complete.

Supplying, erecting, testing and commissioning of 2 core shielded microphone cable complete as per specification no. FF-PA/MCC

Supplying, erecting, testing and commissioning of 1.5 sq mm speaker wire complete.

Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for pumps).

Supplying and installing Stainless Steel single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV

Supplying and installing Stainless Steel Double outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV

Supplying fire fighting R.R.L. Hose pipe, 63mm dia,15m in length, fitted with necessary accessories complete as per specification no.FF-FFA/RRL

Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30mhigh pressure polypropylene (Polyhose)long fitted with necessary accessories complete as per specification No. FF-FFA/HV

Supplying SS branch Pipe 63 mm Ø fitted with 20 mm dia detachable hexagonal nozzle as per specifications No. FF-FFA/NZ

Supplying and installing fire brigade Header of 150 mm Ø, for supplying water in fire tank as per specification No. FFFA/FBC

Supplying and installing fire brigade Header(Siamese Connection)of 150 mm Ø for supplying water to wet riser system as per specification No. FF-FFA/SMC

Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 mm x 736mm x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour

Supplying and erecting one no. Brass orifice plate having 6 mm. thickness, 140 mmouter dia of140 mm at every single outlet hydrant valve as per specification No. FF-FFA/OP

Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of 6 kg capacity with necessary clamp for erection on wall

Supplying & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. Capacity Cartridge type conf. To IS 2878 /15683Complete erected with necessary clamp made from 50x6 mm. M. S. flat with nut & bolts grouted in wall complete.

Providing Round bottom FIRE Bucket of 9 Litrescapacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook

Supplying & erectingGI flexible Conduit 40 mm dia. conforming to I.S. and approved make with required number of couplings, bushes, check nuts etc. complete

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting rigid PVC conduit 25 mm dia.with PVC accessories on wall /ceiling as per specification No: WGMA/CON, para no. 1.1.1 .

Supplying and erecting Iron, sheet metal workconsisting of CRCA Sheets, Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority

Supplying and erecting D.C.P. type fire extinguisher (Cartidge type) 25 kg capacity conforming to IS 14609 cartridge type with gun metal cap, CO2 gas cartridge, powder and brackets conforming to to IS 2171-1985/ IS 15683 IS 14609 and complete erected on trolly, higher capacity controllable dicharge hose and nozle, epoxy polyster powder coated as per IS 10658 with ISI mark fire extinguisher suitable for A,B,C class of FIRE complete.

Supplying and erecting 4 kg clean agent gas Nitrogen pressurised controllable dicharge mechanism, pressure guage, Discharge hose and nozzle epoxy polyster powder coated as per IS 15683 ISI mark fire extinguisheroperating temperature (-)20 to (+) 55 C kg capacity suitable for A,B,C class of FIRE complete.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP. (Size 25x3mm =15mtr/0.590mtr/kg= 8.85.kg say 9.00kg )

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.( GI strip 25 X 3 mm: ( 40 + 40 ) X 2 = 160 Mtr + Down 15 x 4 =60 Total =( 160+60 )=220 mtr x 0.590 kg/mtr= 129.8 Kg. say 130 kg

Supplying & erecting porcelain/epoxy bus bar support complete erected in provided MS box for 200/300A complete.

Supplying, installing, testing and commissioning of 1 kWp off grid solar power pack with GI mounting structure and interconnecting wires / cables along with 24V/12V pure sine wave solar power inverter (THD<5%), 24V/12V charge controller and 24V/12V C-10 rated lead acid battery bank of required capacity and required SPV modules for battery backup of 6 hrs complete,including remote monitoring, with 5 years on site performance warrantee. Specification no. ESD-RT-OFG NOTE-1 ( 1KW X Rs.70476/- , 5 kw x 70476=Rs.352380.00

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

Supplying, installing, testing and commissioning of 1 kWp off grid solar power pack with GI mounting structure and interconnecting wires / cables along with 24V/12V pure sine wave solar power inverter (THD<5%), 24V/12V charge controller and 24V/12V C-10 rated lead acid battery bank of required capacity and required SPV modules for battery backup of 6 hrs complete,including remote monitoring, with 5 years on site performance warrantee. Specification no. ESD-RT-OFG NOTE-1 ( 1KW X Rs.70476/- , 5 kw x 70476=Rs.352380.00

Supplying erecting and marking four pole isolators only switch version of miniature circuit breakers of 63A in provided distribution board complete.

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no. EA-EP.(strip 25x6mm =46mtrx1.51 kg/mtr= 69.46 kg

Supplying & erecting HMS P.V.C. conduit 32 mm. dia. With necessary accessories in wall/floor with chiselling appropriately

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting ISI mark modular type switch one way16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

Supplying & installing HDMI cable low voltage grade as per specification as per specifications having 5 mtr cord length with male/female 19pin HDMI connectors as per requirements complet

Supplying & installing UTP networking Cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. WG-COC/NC

Supplying and fixing 3 meter length, UTP Patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, installing & testing UTP connector (RJ-45) as perspecification No. WG-NAS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports 10/100/1000Mbps unmanaged gigabit PoE Switch complete.

Supplying & erecting on line UPS pure sine wave of 1 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup, as per specification no. AP-UPS

Supplying and erecting 12 V/100Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete.

Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 300 x 200 x 150 mm complete on pole as per specification No. CB-SB

Supplying, installing, testing, Commissioning of 2 mega pixel Bullet camera with motorized varifocal lens and audio in with external microphone Max 2 Megapixel ( 1920 x 1080 ) resolution min illmination colour 0.095 LUX ( 30IRE),B/W: O Lux ( IR LED on,2.8 12mm ( 4.3x) varifocal lens, field of view H: 103.8''',32.4 degree/V: 53.7 Deg to 18.4 Deg/d:121.9 to 37 Deg,Max 30 fps @ 2M all resolutions (H265/H264) H264 MJPEG codec supported multiple streaming motion detection, Tampering defocus detection,Micro SD/SDHC/SDXC memory solt ( max 28 GB ) PoE/12v DC IR Viewable length 30 Metrc,IP 66,IK 10, Halleay view support LDC support Model spefic UL, CE & FCC certification ( NCSR Approved vide C.E. ( Elect.)Letter. No- 273/2020-21 Date- 15/09/2020, Est N0-RSD/OW899/2018-19 & T.S .No- 111/2020-21 )

Supplying ,installing,testing commissioning of 32 Channels main processor quad core embeded processor operating system embeded linux audio input 1 channel output -1channel output RCA Interface 2 HDMI, IVGA revolution 3840x2160 osd camera title time video loss, camera lock motion detection recording compression H265/H.264/MJPEG/MPEG4 record bit rate 320mbps recording mode mode schedule regular /continuous ,motion detection ,alarm ,video push ,email ,FTP ,snapshot,buzzer ,video detection -motion detection HDD 4 SATA port External HDD 1 E SATA port , usb port -3 emissions FCC safety eu en 60950 1 UL listed to UL/CSA 60950-1 rohs compiant ( Make- Honeywel, sony, Bosch) (NCSR Approved vide Ltr No- SE(E)M/NCSR/TS/37/ Date- 02.08.2021 T.S.No- 8 )

Supply and Installation, Testing Commissioning of 4 TB capacity internal SATA HDD (Consider recording of all cameras for 24 hrs and storage for 15 days ) ( NCSR Approved vide C.E. ( Elect.)Letter. No- 273/2020-21 Date- 15/09/2020, Est N0-RSD/OW899/2018-19 & T.S .No- 111/2020-21 )

Supply, Installation, Testing Commissioning of 24 x7 operational 40 inches , LED disply HD with DVI, 2 x HDMI, 1 x Disply ports, RJ 45 CAN, 2x USB port, tizen 3.0 operating system, wifi for Mirroring ( NCSR Approved vide C.E. ( Elect.)Letter. No- 273/2020-21 Date- 15/09/2020, Est N0-RSD/OW899/2018-19 & T.S .No- 111/2020-21 )

Supplying, Erecting testing and commissioning of IP PTZ CAMARA 25x1/2.8* Megapixcel STARVIS " CMOS " Powerful 25 x optical zoom, Starlight Technology ,H26 Encoding Max 50/60fps@1080p,Resolation 1080P(1920x1080)270P(1080x720)/D1(704x48D/CIP(352x288/352x240) Frame Rate main stream 1080P/1.3M/720P(1-50/60fps ) sub stream1:D1/CIF(1*25/30fps) sub stream 2:1080p/1.3m/720P/D1/CIF (1-25/30fps) Auto-tracking and IVS Support PoEIRdistance up to 150m,IP66 focal Lenth 4.8 mm-120mm Max. Aperture F 1.6+ F 4.4 Angle of View H 62.8 "-2.6 " fcus control Auto/Manula Close Focus Distance 100mm-1000mm Audio Compression G711a/G711mu/AAC/G.722/G.726/G.729/MPEG2-L2, Power Supply AC24V/3A(10%) POE+(802.3 at)Power Consumption13W,23W (IR on) ( NCSR Approved letter no-977 of 2021 Date- 15/12/2021 , Est.No- KUESD/OW/5376/2021-22

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. ( Equal Angle wt in Kg /Mtr 25 x 25 x 3 MM =1.1 Kg/Mtr x72 Mtr =79.20 )

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 20 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON, para no. 1.1.2.

Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying & erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting ISI mark modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16A duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 3 modules duly erected.

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

Wiring for plug on board with modular Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Point wiring of light and fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying & erecting 0.5W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting ding dong / electronic musical type call bell with heavy duty coil suitable to operate on 230V A.C. supply erected on polished double wooden block/sunmica block of suitable size

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting street light Wall bracket made from 40 mm. dia ‘B’ class G.I. pipe 1.2 m in total length complete as per specification no. FG-BKT/WB

Supplying and erecting LED street light fitting suitable for above 70W- 75W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS2

Supplying and erecting LED Flood light fitting of 70- 80W, including lamp, with PF > 0.95,class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete per specification No FG-ODF/FLS-2

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

Supplying and erecting five star rated energy saving Ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Supplying, erecting, testing and commissioning self contained water cooler 230/250 Volts 50 cycles nominal cooling capacity of 150 liters/hr and storage capacity 150 liters with partially stainless steel body complete. specification no. AP-WCR/WC

Supplying and erecting ultra violet water purifier with softener for safe drinking water consisting of UV germicidal tube of 8W capacity, choke made of copper wire, two indicator lamps, dual function cartridge with output of purified water 2 litre/min. with activated carbon filter and softener operating on 230 V single phase AC supply.

Supplying and erecting four pole metal clad ON LOAD change over switch 415V,320A erected on angle iron /GI frame complete.

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board as per specification No. SW-SWR/MCB .

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB .

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 poles for incoming and 6 poles for outgoing SP MCB’s on iron/ GI frame as per specification no. SW-SWR/MCBDB

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted suitable for 3 pole MCCB as incomer & outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles) , on iron/ GI frame. (vertical busbar type) as per specification no. SW-SWR/MCBDB1

Supplying & erecting triple pole and neutral distribution board (TPNDB) with door surface/ flush mounted SPMCB of 24 poles, on iron/ GI frame/wooden board.(horizontal busbar type) as per specification no. SW-SWR/MCBDB

Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 63A as per specification no SW-RCCB/RCBO

Providing, erecting and commissioning 2 pole RCCB only of electromagnetic type with 30/100/300 mA sensitivity and having capacity of 16/ 25A complete as per specification no. SW-RCCB/RCCB

Supplying & fixing CRCA sheet Box with earthing terminals for housing 2 Pole RCCB on iron frame/laminated board complete.

Supplying, erecting & marking TPMCB 40A to 63A in provided distribution board as per specification no. SW-SWR/MCB

Providing & erecting 4 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ),adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB NOTE-1

Providing & erecting 4 Pole MCCB of 315/400A, 415V capacity with short circuit rating 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole upto 100A MCCB complete. (set of 6).

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminals for 3 pole 300A- 400A MCCB complete. (set of 6)

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for upto 250A MCCB complete.

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for above 250A upto 630A MCCB complete.

Supplying and erecting hylam sheet/ ebonite 6 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Providing & erecting floor / wall mounting, MCCB panel board with door suitable for four pole incoming 400A, 8 ways four pole outgoing upto 100 A MCCB's on iron frame, as per specification no SW-SWR/MCCBPB. (Excluding MCCB'S)

Providing & erecting incoming and outgoing cable alleys suitable for MCCB panel board with door of 250A incoming and 12 way outgoing or 400A incoming and 6/8 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB complete.

Supplying, erecting & terminating XLPE armoured cable 2 core 2.5 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting FRP box of size 150 x 125 x 100 mm, 2.7 mm thick complete on pole/wall as per specification no. CB-SB

Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification No EA-EP. 25x5 mm (30mtr x1.00 kg/m) =30 kg.

Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying & erecting mains with 2x2.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm F.R solid copper PVC insulated green colour wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 2x4 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Supplying & erecting mains with 1x2.5 sq.mm F.R copper PVC insulated green colour wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW

Wiring for plug on board with Modular type Switch socket with copper wiring and earthing as per specification No:WG-PW/SW

Point wiring for light/bell in 20 mm rigid PVC conduit with 1.5 (2+1E) sq.mm FR grade Copper wire with Modular type switch and required accessaries as per specification No: WG-PW/SW

Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board as per specification no. SW-SWR/MCB

Supplying, erecting & marking TPMCB 6 A to 32A in provided distribution board as per specification no. SW-SWR/MCB ( For Capacitor)

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board as per specification No. SW-SWR/MCB

Supplying & erecting CRCA sheet metal one way enclosures suitable for D.P.M.C.B. /T.P. M.C.B. /F.P M.C.B. complete erected on angle iron frame.

Supplying and erecting Hylam sheet/ Ebonite 6 mm thick for covering wall entries including cutting drilling and fixing with nut bolts / screws etc. complete. [1 x 1sq.mtr ]

Supplying and erecting Iron work with Various sections of iron, Plates, Chequered Plates, Rods, Bars, MS pipes, etc. for panel board or any other purposes complete with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority .[For angle iron Frame: 10 Mtr x 3 Kg/mtr =30 Kg ]

Supplying & erecting LED type indicating pilot lamp with LED colours Red / Yellow / Green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc.

Supplying, erecting & terminating PVC armoured cable 4 core 6 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting ISI mark GI pipe 65 mm. dia. ‘B’ class at position with accessories complete. Specification no. CW-PLB/GP.

Providing earthing with Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting G.I. strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). (25x5 MM : 8 Mtrs x1 Kg/mtr = 8 Kg ]

Supplying and erecting submersible pump set suitable for erection on open well of 5.625 KW/7.5 HP with 415 V 50 c/s.A.C. supply, having delivery head from 36 to 18 m and discharge from 400 to 1000 Itrs. per minute (Max efficiency at 29 m head & 680 Itr discharge) & pipe of Suction 75 mm/Delivery 65 mmdiameter erected with necessary H type clamps as per specification no. WP-OSP

Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc

Supplying and erecting 525 V 3 phase, 50 Hz., APP type capacitor having minimum overcurrent capacity of 1.8 In, peak inrush current capacity 300 In and minimum life 150000 hours kVAr bank of all polypropylene condensers (APP) with the standard capacities of 2, 3, 5, 7, 10, 12.5 and 15 kVAr units of P.F. correction for operation on 3 phase 50 Hz. with externally discharging resistances, earthing terminals and built on angle iron or channel iron frame work and provided with terminal cover box complete erected on provided iron bracket or on floor duly tested by licensee.

Supplying and erecting four pole metal clad ON LOAD change over switch 415V, 40A erected on angle iron / GI frame complete. .

Supplying and erecting flat flexible 3 core 4 sq mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

Supplying and erecting ISI mark G.I. pipe 75/80 mm dia ‘C” class position with accessories. As per specification No. CW-PLB/GP.

Supplying and erecting ISI mark G.I. pipe 50 mm. dia ‘C” class position with accessories. As per specification No. CW-PLB/GP

Supplying and erecting non return valve 65 mm dia in position made of gun metal complete.

Supplying and erecting 65 mm dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting CI flange 65 mm. dia with necessary nuts bolts and washers with rubber seal in position complete.

Supplying, installing, testing and commissioning of FPC solar water heating system without heat exchanger type of 500 LPD capacity a complete. Specification no. ESD-SHWS-FPC

Supplying and erecting 16/20 mm (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for solar water heater system complete. Specification no. (ESD-HWP/PCP)

Supplying and erecting 25/32 mm (ID/OD) polyethylene composite pipe duly joined by compression/crimp fitted accessories, with internal as well as external end sealing arrangement for solar water heater system complete. Specification no. (ESD-HWP/PCP)

Providing and fixing high-density polyethylene (HDPE) container one piece moulded water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

Supplying and erecting ISI mark GI pipe 50 mm. dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP

Supplying and erecting ISI mark GI pipe 40 mm. dia ‘C” class at position with accessories complete. Specification no. CW-PLB/GP.

Supplying and erecting 25 mm dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting 50 mm dia. gun metal sluice valve at position with necessary materials complete.

Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.

Supplying, erecting and commissioning of diesel generating set with alternator of 125 kVA output continuous rating, 3 phase, 415 V, 50c/s 0.8 p. f. A.C a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/- 5 %. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level upto 75 dB at 1.0 m, provided with first filling of oil, diesel etc. as per specification no. GEN-DG

Supplying, erecting, testing and commissioning of Microprocessor based AMF panel suitable for diesel generating set of above 100 kVA upto 125 kVA capacity Single/Three phase, 230/415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

Providing round bottom FIRE Bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook.

Providing floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint.

Supplying and fixing PVC Synthetic elastomer electrically insulating mat with class A insulation conforming to IS: 15652 – 2006 & CPRI tested having 2 mm thickness upto 3.3 kV

Providing cement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm. stone metal duly plastered with necessary curing for pole muffing or any other purposes. SIZE -4*2.15*1.0 = 10 cu.mtr

Excavating soft Murum/Soil road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site good. SIZE -4*2.15*1.0 = 10 cu.mtr

Supplying, erecting & terminating XLPE armoured cable 4 core 70 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL

Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP.

Providing earthing with Copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supplying and erecting copper strip of required 20x5mm size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with bituminous paint in an approved manner with joints required. as per specification No (EA-EP). (2runs x 10 mtr long each x 0.886Kg/mtr= 17.72 Kg Say 18.00 KG

Supplying and erecting G.I. strip of 20x5 size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). (4 runs x 10 mtr long each x 0.79Kg/mtr= 31.60 Kg . Say 32.00 KG

Supplying & erecting conventional spike type air termination suitable to carry lightning stroke made up of heavy gauge 40 mm dia copper pipe of standard length with 5 Nos. copper spikes fixed on copper ball as air terminals duly threaded in copper pipe erected on provided foundation in an approved manner.

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required. As per specification no EA-EP.( GI strip 25 X 3 mm: ( 60 + 40 ) X 2 = 200 Mtr + Down 20 x 4 =80 Total =( 200+80 )=280 mtr x 0.590 kg/mtr= 165.20 Kg. say 165 kg

Supplying & erecting porcelain/epoxy bus bar support complete erected in provided MS box for 200/300A complete.

Supplying and erecting ISI mark GI pipe 50 mm. dia ‘C” class position with accessories complete. Specification no. CW-PLB/GP.

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no. EA-MOBI

Supplying & erecting HMS P.V.C. conduit 32 mm. dia. With necessary accessories in wall/floor with chiselling appropriately

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting mains with 1x1.5 sq.mm F.R copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying and erecting ISI mark modular type switch one way16 / 20 A, duly erected on provided plate and box with wiring connections complete with neon indicator.

Supplying and erecting ISI mark modular type 3 pin 6 / 16Amulti socket with safety shutter, duly erected on provided plate and box with wiring connections complete

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected.

Supplying & installing HDMI cable low voltage grade as per specification as per specifications having 5 mtr cord length with male/female 19pin HDMI connectors as per requirements complet

Supplying & installing UTP networking Cat-6+ cable suitable for LAN / WAN Computer net-working as per specification no. WG-COC/NC

Supplying and fixing 3 meter length, UTP Patch cord of Cat 6 type in position as per specification No. WG-COC/PC

Supplying, installing & testing UTP connector (RJ-45) as perspecification No. WG-NAS/UTPC.

Supplying and fixing 6U wall mount rack (Dimension-DxWxH – 450x550x367 mm) as per specification No. WG-NAS/RAK

Supplying, fixing, and configuring 8-ports 10/100/1000Mbps unmanaged gigabit PoE Switch complete.

Supplying & erecting on line UPS pure sine wave of 1 kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins. battery backup, as per specification no. AP-UPS

Supplying and erecting 12 V/100Ah SMF battery with battery terminal wire, duly charged complete with 24 months warranty complete.

Supplying & erecting water tight terminal box of 1.6 mm (16 gauge) CRCA sheet of size 300 x 200 x 150 mm complete on pole as per specification No. CB-SB

Supplying, installing, testing, Commissioning of 2 mega pixel Bullet camera with motorized varifocal lens and audio in with external microphone Max 2 Megapixel ( 1920 x 1080 ) resolution min illmination colour 0.095 LUX ( 30IRE),B/W: O Lux ( IR LED on,2.8 12mm ( 4.3x) varifocal lens, field of view H: 103.8''',32.4 degree/V: 53.7 Deg to 18.4 Deg/d:121.9 to 37 Deg,Max 30 fps @ 2M all resolutions (H265/H264) H264 MJPEG codec supported multiple streaming motion detection, Tampering defocus detection,Micro SD/SDHC/SDXC memory solt ( max 28 GB ) PoE/12v DC IR Viewable length 30 Metrc,IP 66,IK 10, Halleay view support LDC support Model spefic UL, CE & FCC certification ( NCSR Approved vide C.E. ( Elect.)Letter. No- 273/2020-21 Date- 15/09/2020, Est N0-RSD/OW899/2018-19 & T.S .No- 111/2020-21 )

Supplying ,installing,testing commissioning of 32 Channels main processor quad core embeded processor operating system embeded linux audio input 1 channel output -1channel output RCA Interface 2 HDMI, IVGA revolution 3840x2160 osd camera title time video loss, camera lock motion detection recording compression H265/H.264/MJPEG/MPEG4 record bit rate 320mbps recording mode mode schedule regular /continuous ,motion detection ,alarm ,video push ,email ,FTP ,snapshot,buzzer ,video detection -motion detection HDD 4 SATA port External HDD 1 E SATA port , usb port -3 emissions FCC safety eu en 60950 1 UL listed to UL/CSA 60950-1 rohs compiant ( Make- Honeywel, sony, Bosch) (NCSR Approved vide Ltr No- SE(E)M/NCSR/TS/37/ Date- 02.08.2021 T.S.No- 8 )

Supply and Installation, Testing Commissioning of 4 TB capacity internal SATA HDD (Consider recording of all cameras for 24 hrs and storage for 15 days ) ( NCSR Approved vide C.E. ( Elect.)Letter. No- 273/2020-21 Date- 15/09/2020, Est N0-RSD/OW/899/2018-19 & T.S .No- 111/2020-21 )

Supply, Installation, Testing Commissioning of 24 x7 operational 40 inches , LED disply HD with DVI, 2 x HDMI, 1 x Disply ports, RJ 45 CAN, 2x USB port, tizen 3.0 operating system, wifi for Mirroring ( NCSR Approved vide C.E. ( Elect.)Letter. No- 273/2020-21 Date- 15/09/2020, Est N0-RSD/OW/899/2018-19 & T.S .No- 111/2020-21 )

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority. ( Equal Angle wt in Kg /Mtr 25 x 25 x 3 MM =1.1 Kg/Mtr x72 Mtr =79.20 )

SITC of Electric Traction Passenger Cum Stractcher / Hospital Lift with • Rated capacity :- 20 Passenger/1360 Kg • Floors :- G + 3 floor ( 4 Stops / 4 Landings) • Travel :- 3 to 4.2 mtrs • Location of Lift Machine:- MR Above Lift Shaft Rated speed :- 1.0 mps VS • Doors type :- COPO Doors with frame having clear opening of 1100/1200 mm wide x 2000 mm high made from SS 304 grade sheet of 1.5mm, thick in hairline finish for car and all landing doors with SS door architraves/frames • Lift car enclosure made from SS 304 grade sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower/fan for ventilation & SS chequered plate flooring, handrails, mirror, emergency light etc. • COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor Clear Car size of 1500 mm wide x 2000 mm deep x 2100mm high for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings • Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessa ry port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class • ARD complete with necessary SMF VRLA batteries • Fireman controller having fireman switch at fire Landing, • CCTV surveillance system comprises of 2nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car & in LMR/inside lift shaft top aimed on Lift machinery & controller with NVR kept in LMR/FCC with HDR data backup for 60 days with 18" FHD TV monitor, to be kept in FCC/LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.. • Lift shaft available having clear size of 2400 mm wide x2500 mm deep, 1400 MM Pit depth , 4800 MM Overhead. ( Rs.2262786.00 ) ADD ON Note For Lift travelling up to six floors at a speed of 1.0 mps, add as below, Note 5 - For Lift having 1100mm wide x 2000mm high clear entrance in 1.5mm thick SS 304 grade landing door [Two panel], this includes all necessary accessories like LOP's with UP/DN buttons-arrows-indicators, extension of guide rails, shaft wiring with trunking, travelling cables, main hoisting ropes/belts, & OSG rope landing doors with all accessories etc. necessary for the normal safe functioning of lift installation complete ( Rs.176117.00 x 2 Additional floors =Rs. 352234.00 ) For Full Collective control system, add as below. For Lift travelling above First floor & up to Sixth floor ( Rs.31974.00 ) For additional 2MP Camera along with necessary accessories at Home Landing, add as given. ( Rs.15741.00 x 4 nos= Rs.62964.00 ) For vision panel having Size 100mm wide x 200mm high covered with fire rated laminated glass, having punched Jali as a part of the door panel SS sheet itself. ( Rs.3261.000 x 5 nos= Rs.16305.00 ) Notes. 1) General: - Job includes entire procedure of obtaining all necessary erection permissions & "License to Work the Lift" from Electrical Inspector (Lifts) with submission to the Engineer In Charge. 2) Warrantee: - Job covers three years onsite warrantee for all the Lift parts with FCAMC as per the maintenance schedule. ( Rs.2262786.00 + Rs.352234.00 + Rs.31974.00 +Rs.62964.00+Rs.16305.00 = Rs. 27,26,263.00 )

Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick Laminate with S M screws and duly connected.

Wiring for plug on board with Switch socket, copper wiring and earthing as per specification No: WG-PW/SW

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying and erecting corridor/Passage light fitting (2 feet) including 18W LED lamp, comprises of extruded channel in plastic silver grey colour & with same plastic end cap on provided PVC block / wooden board.

Supplying & erecting LED 18W tube light fitting (4 feet) with polycarbonate housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 300mm. 1400 RPM rust proof body & blades, wire mesh, duly erected in an approved manner.

Supplying & erecting 22 SWG G.I sheet metal cawl sector shaped with 25 x 25 x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm as per specification no FG-FAS/MSC.

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SW-SWR/MCB

Supplying, fixing and commissioning 2 pole,RCBO (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 6/10/16/20/25A, as per specification no SWRCCB/ RCBO

Providing, erecting & commissioning 4 pole, 40A RCCB with added immunity which can avoid nuisance DC pulse tripping with30/100/300 mA sensitivity complete as per specification no. SWRCCB/ RCCB

Supplying and erecting single pole and neutral distribution board (SPNDB) with door surface/flush mounted with 2 ways for incoming and 6 ways for outgoing SP MCB’s on iron/ G.I. frame/wooden board as per specification No. SW-SWR/MCBDB

Supplying, fixing and commissioning 4 pole RCBO ( (residual current breaker with overcurrent short circuit 10 kA and earth leakage protection), with 30/100/300 mA sensitivity and having capacity of 63A as per specification no SW-RCCB/RCBO

Supplying & fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB complete on iron frame/laminated board.

Supplying & fixing CRCA sheet Box with earthing terminals for housing 4 Pole RCCB complete on iron frame/laminated board.

Supplying & erecting PVC armoured cable 2 core 2.5 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying & erecting PVC armoured cable 2 core 4 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying, erecting & terminating PVC armoured cable 4 core 10 sq mm copper conductor continuous 5.48 sq mm (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/CU

Supplying and erecting Galvanised cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP ( Earthing Schedule= [ Lift motor- 2,switch gear=1, m/c room controller (EI) =1 ] X 2 Lifts = 8 )

Supplying and erecting G.I. strip of 25 x 3 MM size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joint required. as per specification No (EA-EP). ( 16 mtr long x 6 = 96 Mtr x 0. 590 Kg/mtr = 56. 64 Kg x 2 = 113.28 Kg

Klassic Associates

Spectrum Infrastructure