SPECIAL REPAIRS/REPLACEMENT OF LT PANELS, LOOP IN, LOOP OUT BOXES AND BUS BAR BOXES AREA AT AFS YELAHANKA

Amount

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 900 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-1 No (c) 4 Pole MCCB 160 Amp,50 Hz, 415V with rupturing capacity 25 KA- 7 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 600/5- 01 (set of 03) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level.

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 900 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -3 No OUTGOING :- (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-03 No (c) 4 Pole MCCB 315 Amp,50 Hz, 415V with rupturing capacity 36 KA- 03 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 630/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location:- AN-32 Power House INCOMING :- (a) 4 Pole ACB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -1 No OUTGOING :- (b) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, -1 No (c) 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, -2 No (d) 4 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (e) Digital Volt meter (0-500 V)-01 No (f) Digital Ammeter-01 No (g) CT's 200/5- 01 (set of 3) (h) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level.

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 900 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-2 No (c) 3 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -2 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 630/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 30 cm above the ground level.

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -1 No OUTGOING:- (b) Digital Volt meter (0-500 V)-01 No (c) Digital Ammeter-01 No (d) CT's 400/5- 01 (set of 3) (e) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 600 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- AN-32 Power House INCOMING:- (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 400 Amp, 50 Hz, 415 V with rupturing capacity 36 KA,-1 No (c) 4 Pole MCCB 300 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -2 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 630/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 350 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- DORNIER FTD INCOMING:- (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 125 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (c) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 200/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 350 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- DORNIER FTD INCOMING:- (a) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA -1 No OUTGOING:- (b) 4 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 36 KA -1 No (c) Digital Volt meter (0-500 V)-01 No (d) Digital Ammeter-01 No (e) CT's 200/5- 01 (set of 3) (f) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 1200 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- 112 HU PH INCOMING:- (a) 4 Pole ACB 630 Amp, 50 Hz, 415 V with rupturing capacity 50 KA, Incomer -1 No OUTGOING:- (b) 4 Pole MCCB 315 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -2 No (c) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 36KA, Incomer -2 No (d) 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, Incomer -2 No (e) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, Incomer -2 No (f) 4 Pole MCCB 32 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, Incomer -2 No (g) Digital Volt meter (0-500 V)-01 No (h) Digital Ammeter-01 No (j) CT's 630/5- 01 (set of 3) (k) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 400 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- 112HU PH INCOMING:- (a) 4 Pole MCCB 250 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, -1 No OUTGOING:- (b) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, -1 No (c) 4 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -1 No (d) Digital Volt meter (0-500 V)-01 No (e) Digital Ammeter-01 No (f) CT's 200/5- 01 (set of 3) (g) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

Fabricate, supply ,install, testing and commissioning of LT panel indoor type 415 Volts, 50 Hz, 3 phase, 4 wire for accomodating the following accessories totally enclosed self supporting structure fully compartmentalized suitable for indoor use with bottom cable entry with suitable cable glands made out of CRCA sheet 2mm thick with angle iron frame works with suitable legs of ISA 50x50x5mm with four legs grouted with PCC (1:2:4) type B1, foundation block with suitable mounting arrangement for aluminium bus bars 500 Amps capacity, hindged door at front with suitable locking arrangement, provision of louvers at sides, CPRI approved, dust and vermin proof, powder coated with and including following accessories suitable for incoming/outgoing arrangements complete all as specifed and directed Location :- 112HU DSS INCOMING:- (a) 4 Pole MCCB 315 Amp, 50 Hz, 415 V with rupturing capacity 36 KA, -1 No OUTGOING:- (b) 4 Pole MCCB 160 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, -2 No (c) 3 Pole MCCB 100 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -1 No (d) 3 Pole MCCB 63 Amp, 50 Hz, 415 V with rupturing capacity 16 KA, -3 No (e) 3 Pole MCCB 200 Amp, 50 Hz, 415 V with rupturing capacity 25 KA, -1 No (f) MCB 63 Amp, 50 Hz, -2 No (g) Digital Volt meter (0-500 V)-01 No (h) Digital Ammeter-01 No (j) CT's 315/5- 01 (set of 3) (k) LED type Indication lamps (RYB)-one set Note : Bottom portion of the panel should be minimum 45 cm above the ground level

M & L for Earthing complete with galvanised earth plate electrode of size 600x600x6 mm thick burried directly in ground earth pit not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 mtrs below ground level connected to 25X4 mm galvanised iron strip as earth lead upto a length of 7.5 metre long by means of bolts,nuts, washers etc. and protected by GI pipe light grade 15mm dia and 20mm dia GI tubing light grade with funnel for watering, all as shown in electrical plate No 3 of SSR Part-I, back-fill with salt and charcoal, provision of test point including connected to earth test point and necessary earth work excavation in any type of soil PCC (1:3:6) type C1 bed and chamber RCC (1:2:4) type B1, iron grill including GI cover with hinge and funnel watering pipe etc, testing, complete all as specified and directed by Engr-in-Charge. Note : If desired testing result is not acheived re-earthing shall be carried out by the contractor at no cost to the department.

Gee Kay Projects (BID ID -3276087)

devan enterprises (BID ID -3275983)

UNIVERSAL ENGINEERING (BID ID -3276097)

Lucky Enterprises (BID ID -3276193)