Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹51.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹63.0 L+₹11.3 L (21.8%)Rejected-Finance AMLA TOLA DISTT KATIHAR BIHAR 854105 | KATIHAR | BIHAR | 854105 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹63.0 L+₹11.3 L (21.8%)Rejected-Finance 57 7 MEGHNAD SAHA SARANI PRADHAN NAGAR SILIGURI 734 403 DIST DARJEELING | SILIGURI | DARJEELING | WEST BENGAL | 734403 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹68.3 L+₹16.5 L (32.0%)Rejected-Finance 30 HAREN MUKHERJEE ROAD HAKIMPARA SILIGURI 734 001 DARIEELING WB | DARJEELING | WEST BENGAL | 734001 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹69.8 L+₹18.1 L (34.9%)Rejected-Finance VIVEKANANDA SUPER MARKET IST FLOOR ROOM NO 8 HILL CART ROAD PO SILIGURI DIST DARJEELING PIN 734401 | DARJEELING | WEST BENGAL | 734401 | L5 | Rejected-Finance Other than lowest bidder |
Tender Value
₹63.5 L
EMD Value
₹1.2 L
Closing Date
3 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Bengdubi
Headquarters Commander Works Engineer Bengdubi Post-Bengdubi Distt-Darjleeling (WB) 734424
PROVN OF X-RAYS EQUIPMENT ROOM AND DARK ROOM FOR DENTAL UNIT AND SPL REPAIR TO CERTAIN BLDG AT SUKNA STN UNDER GE SUKNA
2023_MES_617352_1
8187/S/E8
Open Tender
Civil Works
Item Rate
270 days
Sukna
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,000
GE Sukna
₹1.2 L
HQ CWE Bengdubi
30 Jan 2024
5 Sept 2023
10 Oct 2023
5 Sept 2023
3 Oct 2023
27 Sept 2023
15 Sept 2023
Amount
Surface excavation n exec 30 cm deep and average 15cm deep and disposal of the debris etc outside the premises, complete all as specified and as directed.
Excavation over areas, not exceeding 1.5 metre deep in soft/loose soil and getting out, complete all as specified and as directed.
Excavation over areas, exceeding 1.5 metre deep & not exceeding 3.00 metre deep in soft/loose soil and getting out, complete all as specified and as directed.
Excavating in trenches n.exc. 1.50m wide and n.exc 1.50m in depth for foundation etc or for shafts, wells, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5 metre in depth and getting out in soft/loose soil, complete all as specified and directed.
Excavating in trenches n.exc. 1.50m wide and exc 1.50m & not exceeding 3.00m in depth for foundation etc or for shafts, wells, manholes etc not exceeding 10 Sqm on plan and exceeding 1.50m & not exceeding 3.00 metre in depth and getting out in soft/loose soil, complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed
Removing excavated material to a distance not exc 50.00 mtr and depositng where directed at a level n.exc 1.5m above the stating point, complete all as specified and as directed.
M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface are, complete all as specified and as directed.
M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and as directed.
M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per quare metre of surface, complete all as specified and as directed.
M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.
M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and as directed.
M&L for cement concrete in foundation filling and mass concrete type D2 (1:4:8) using 40 mm graded stone aggregates, complete all as specified and directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc, complete all as specified and as directed. Notes:- Reinforcement and Form Work shall be measured and paid for seperately. .
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in columns, pillars, piers, posts and struts, complete all as specified and as directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed.
M&L for reinforced cement concrete (design mix) M-25 (using 20 mm graded stone aggregates) as in Chajjas, complete all as specified and as directed.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.
M&L for TMT bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc, complete all as specified and as directed.
M&L TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc, complete all as specified and as directed.
Use and waste of formwork to sides of concrete foundations/footings, bases of columns, raft and raft-beams, sides & soffits (if any) of foundation and plinth beams and similar work, vertical or to batter, for rough finished flat surface of concrete, complete all as specified and as directed.
Use and waste of formwork to square, rectangular or polygon sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete, complete all as specified and as directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, ressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and as directed.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, chajjas landings and similar work, not exceeding 200mm thick (horizonal or slopping) for rough finished flat surfaces of concrete, complete all as specified and as directed.
Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edgese, complete all as specified and as directed.
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide, sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished flat concrete surfaces, complete all as specified and as directed.
M&L for Brickwork with Sub-class 'B' Old size of class designation of designation 75 (i.e of minimum average compressive strength 75 Kg/Cm2), straight or curved on plan exc 6m mean radius, built in Cement morter 1:6, complete all as specified and directed.
M&L for brick work with Sub-class 'B' Old size of class designation 75 (i.e of average compressive strength 75 Kg/cm2 ) straight or curved on plan to any radius as in half brick thick walls, built in CM 1:4, complete all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces etc, including raking out joints, hacking for key, scrubbing down with water etc, and also including removal of rubbish off the premises, complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar (1:6), on brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on brick work or concrete surfaces finsihed even and smooth (without using extra cement) mixed with water proofing compound as per manufacturer instructions, complete all as specified and as directed. Note:- WPC shall be measured and paid seperately.
M&L 10 mm thick rendering in CM 1:3 on ceiling surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
M&L 40mm thick damp proof course to horizontal surfaces in cement concrete 1:2:4 type-B0 (using 12.50 mm graded stone aggregates) mixed with integral water proofing compound with weight of cement as per manufacturer's instructions including necessary formwork, complete all as specified and as directed. Note:- WPC shall be measured and paid seperately.
Supply only Integral water profing compound complete all as specified and directed.
M&L for sand filling under floors or in foundations including watering and consolidating, complete all as specified and directed.
M&L for hardcore of broken stones or boulders of gauge not exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick, watered & rammed to a true surface, complete all as specified and directed.
M&L for 100mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) as in sub base of flooring, complete all as specified and as directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregates) as in sub-base of floors etc, finished even & rough, complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), including disposing off the retrieved debris outside the premises, complete all as specified and as directed.
M & L for double charge premium quality vitrified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L for double charge premium quality vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in vertical surfaces such as skirting etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 10mm thick cement morter backing coat in CM 1:4, complete all as specified and as directed.
M & L for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match with the shade of tiles, over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed.
M&L for coloured Glazed ceramic tiles of size 450mmx 300mm , 6 to 7 mm thick on the vertical surfaces such as in skirting / dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match with the shade of the tiles, over and including 10mm thick cement mortal backing coat in CM 1:4, complete all as specified and and as directed.
S&F factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed.
S&F Factory made 30mm thick flush shutter solid core construction with Medium Density Fibre Board Core, Exterior Grade, commercial type on both sides including provision of 4mm thick 2nd class hard wood edging to the exposed edges of the shutter, complete all as specified and as directed.
S&F 100mm size butt hinges, medium weight, cold rolled, mild steel, complete all as specified and as directed
S&F 100mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and as directed
S&F Aluminium anodised barrel tower bolt 150 mm long of extruded section, complete all as specified and as directed.
S&F 150 mm size aluminium handle, cast type, anodised, complete all as specified and as directed.
S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and as directed.
S&F hold-fasts, wall ties, hooks for hanging fans; plain angle cleats for securing purlins to steel trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290; Gde-E-165, complete all as specified and as directed.
M&L for the Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165, complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregates) as in hold-fast blocks, blocks for fixing lugs, filling of pressed steel chowkhat and the like including necessary form work, complete all as specified and as directed.
M&L for granite (of any type) 20mm thick (Table rubbled and polished ) in steps, jamps, pillar window cills etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
S&F standard aluminium powder coated section(minimum thickness of powder coating shall be 50micron and colour shall be as approved by the GE) as in frame, shutters for doors, windows / ventilators, Fixed/ Openable / side hung/ sliding two or three track or in any pattern, partitions, kitchen cabinate, kitchen almirah, etc cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass, provision of hinges, screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete all as specified and directed. Notes:- (i) Weight of Aluminium sections as per actual or as per IS or as per manufacturer, whichever is less, shall only be considered for payment. (ii) The accessories (including Aluminium mongries etc) required to be provided for windows, vents and doors as per directions of Engineer-in-charge shall be provided but weight for the same shall not be considered. (iii) Cost of all the items, accessories & Aluminium mongries required for the entire completion of the work shall be deemed to be included in the quoted rate. However glass panes, wire cloth,and lock shall be measured and paid separately under respective items.
S&F 4mm thick frosted sheet glass on one side of ordinary quality and glazing for Aluminium Joinery or for steel surrounds with & including oil putty in each pane n.exc 0.5Sq.m, complete all as specified and as directed.
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with and including stainles steel wire staples etc, complete all as specified and as directed.
M&L for preparing new plastered surfaces of walls, applying two coats of wall care Putty (minimum thickness of two layers shall be 2.00mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.
M&L for preparing new plastered surfaces of walls, applying two coats of cement base paint over a coat of primer, complete all as specified and directed.
S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed on the surfaces in the walls & ceiling or laid in floors, , complete all as specified and as directed.
S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed concealed in the walls & ceiling or laid in floors, also including cutting chases of the required size and making good the same after fixing of the pipes in CM 1:3 to match with the adjoining surfaces, complete all as specified and as directed.
All as per item no 62 above but 20 mm bore pipes.
All as per item no 63 above but 20 mm bore pipes.
S&F Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality, white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised hinged device, making connections, complete all as specified and as directed.
S&F PVC valveless, double syphonic action type, flushing cistern, low level of 10 Litres capacity, white, with and including inlet, ball valve, float, 32mm dia flush pipe of polyethylane of low or high density or PVC, flushing bend & handles, also including brackets, suitable for Europeon Type Water Closet & making connections, complete all as specified and as directed.
S&F vitreous china wash basin, 1st quality, white, flat back, size 550x400 mm excluding taps but including 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and as directed.
S&F brass chromium plated shower roses, 125 mm size with or without swivel joints including fixing to 15mm bore steel pipe or union, complete all as specified and as directed.
S&F bib tap, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed
S&F Pillar taps, fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.
S&F CP health faucet suitable for 15 mm dia pipe with 1.25 metre long flexible tube of dia 12mm attachment to wall hook and connection with angular stop cock, complete all as specified and as directed.
S&F angular stop cock, chromium plated , screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and as directed.
S&F stop valves, fancy type, cast copper alloy, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore, complete all as specified and as directed.
S&F corner shelf glass with chromium plated bracket guard and railing, complete all as specified and as directed.
S&F Towel Rail of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and as directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm fixed to plugs with chromium plated brass screws, complete all as specified and as directed
S & F 110 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall/floor with necessary PVC standard stay clamps etc, complete all as specified and directed. Note iten No. 79 &80 :- Quoted rates shall also be deemed to include for cutting of the holes where required/ directed and making good the same in CM 1:3 to match with the existing surfaces.
S & F 75 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall/floor with necessary PVC standard stay clamps etc, complete all as specified and directed.
S&F PVC (SWR) floor trap 75 mm, setting and jointing with and including solvent cement and provision of cement concrete type B-1 (1:2:4) block of required size for fixing, including necessary excavation & earth work, complete all as specified and as directed.
S&F 110mm bore PVC (SWR) bends (any radius), with and including rubber ring joints, complete all as specified and directed.
S&F 75mm bore PVC (SWR) bends (any radius), with and including rubber ring joints, complete all as specified and directed.
S&F PVC vent cowl for 110mm bore PVC (SWR) pipe with and including rubber ring joints, complete all as specified and directed.
S&F PVC vent cowl for 75mm bore PVC (SWR) pipe with and including rubber ring joints, complete all as specified and directed.
S&F stainless steel grating doom75mm dia, complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type three-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, complete all as specified and as directed.
S&F Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 25mm bore (Minimum weight 455 grms), complete all as specified and as directed.
M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
M&L for Preparation of new steel and iron surfaces of any description, n.exc 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
M&L for preparation of steel and iron surfaces duly applied with shop coat of primer of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint, complete all as specified and as directed. Note : Cost of application of shop coat of primer not included in the above item.
M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortarr, complete all as specified and directed.
M&L for 150 mm bore SGSW pipe, grade 'A', laid in trenches including jointing with cement mortar, complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregates for 150 mm bore pipes as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and as directed.
M&L Cutting into existing manholes for connecting new drains of 150 mm bore, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required, complete all as specified and as directed.
S&F Vitreous China Urinal, Half stall type, white (including, flush pipe and waste pipe), complete all as specified and as directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.
S&F pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer, as in roof covering/ cladding to wall, fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.
S&F pre-painted colored plain sheet profiled Galvalume/Zincalume sheet with min 0.50mm TCT confirming to IS-513 (AZ-150 GSM, AL Zn alloy metalic coating, 550 MPA yield stress as per AS-1397), colour /exterior coat of silicon modified polyster/ BHP X RW paint system 20 micron top coat applied over 5 micron primer and a 5 micron polyster back coat applied over 5 micron primer,as in roof covering/ cladding to wall fixed with and including Galvanised self drilling self-tapping fastener (12-14 x 55 with EPDM seals), complete all as specified and directed.
Dismantling wrought iron as in rafters, purlins, truss etc and/or mild steel work of any description not otherwise provided for, complete all as specified and as directed
S&F roof trusses (framed), trussed, purlins, crane gantry, rails and fastenings and heavy brackets framing (Beam, Tee, Angle,, Channel or Flat Sections) including distance pieces, cleats, etc of Grade Fe 410-W (Gde-E-250) Quality - B, includng welding or riveting etc, complete all as specified and as directed.
S&F plates of Grade Fe 410-W (Gde E-250) quality - B (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attacment including welding or riveting etc, complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, including cover fillets, and existing frame work also, complete all as specified and as directed.
S&F of GI frame work (with size of grid 605mmx605mm) for seamless ceiling comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including provision of hangers (length of hangers as required at site) made of 4mm dia GI wire and other accessories and including 10 mm thick PVC insulation panels with EPS stuck to 1mm plain PVC sheet, complete all as specified and as directed.
M&L decorative type plaster of paris work of size not less than 50x50mm, as in cornice or junction of wall and ceiling, complete all as specified and directed.
S&F of 12mm thick (No. of ply 7) veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face fixed with screws to timber frame work in wall panelling, complete all as specified and as directed.
Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc, also including taking down of grills/ guard bars (where exists) and disposing off the retrieved debris outsite the premises, complete all as specified and as directed.
Taking down chowkats or frames with Wooden/PVC/Flush shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc, also including taking down of grills/ guard bars (where exists) and disposing off the debris outsite the premises, complete all as specified and as directed.
S&F 4mm thick sheet glass of ordinary quality and glazing for steel surrounds with & including oil putty, in squares exc 0.50 sqm in each pane, complete all as specified and as directed.
S&F 4mm thick sheet glass of ordinary quality and glazing for steel surrounds with & including oil putty, in squares n exc 0.50 sqm in each pane, complete all as specified and as directed.
M&L 18/19 mm Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber/aluminium frame work as in cupboard shelves, partition, etc, including provision of 2nd Class Hardwood, 4 mm thick beading on the edges of the particle board, complete all as specified and directed.
S&F factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for doors with one or more rebates including necessary provision of lugs, locks strike plate, hinges etc, applying one shop coat of Zinc Chromate primer after prepation of the surfaces, complete all as specified and as directed.
S&F Factory made 35mm thick flush shutter solid core construction with Medium Density Fibre Board Core, Exterior Grade, commercial type on both sides including provision of 4mm thick 2nd class hard wood edging to the exposed edges of the shutter, complete all as specified and as directed.
S&F Factory made Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. Square tube, complete all as specified and shown on drawing for SI No. 08095 on Srl Page No. 180 of SSR (Part-II) complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail, on either side & as gap insert for top rail & bottom rail, panelling of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as shown on drawing for SI No 8091 on Srl Page No 179 of SSR Part-II, complete all as specified and as directed.
S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and as directed.
S&F in repair decorative type wooden finish double barcket support suitable for the curtain rod and corner to be fixed to ends of curtain rod including ring with screw, complete all as specified and as directed.
S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and as directed.
S&F in repair door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and aluminium dia cast body, complete all as specified and directed.
S&F in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 150mm overall length of cover plate, complete all as specified and directed.
S&F Mortice lock aluminium body, vertical type, size 100 mm, 2 levers, complete all as specified and directed.
M&L for 20 mm thick machine cut, pre-polished, black jet, premium quality, granite stone slab as in kitchen platform, cills, jambs etc, laid over and including 15mm thick Cement mortar 1:4 screed bed, jointed with grey cement slurry and pointed with white cement mixed with admixture of pigments to match with the shade of granite stone including rounding / moulding the edges half round, and including dismantling of old one, complete all as specified and directed.
S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed on the surfaces in the walls & ceiling or laid in floors, surfaces also including taking down 15mm bore steel tubing & connections, complete all as specified and as directed.
S&F 15mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed concealed in the walls & ceiling or laid in floors, including cutting chases of the required size and making good the same after fixing of the pipes in CM 1:3 to match with the adjoining surfaces also including taking down 15mm bore steel tubing & connections, complete all as specified and as directed.
S&F 20mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed on the surfaces in the walls & ceiling or laid in floors, , also including taking down 20mm bore steel tubing & connections, complete all as specified and as directed.
S&F 20mm bore medium grade, galvanized steel tubing (including in short lengths) with and including all fittings, fixed concealed in the walls & ceiling or laid in floors, including cutting chases of the required size and making good the same after fixing of the pipes in CM 1:3 to match with the adjoining surfaces, also including taking down 20mm bore steel tubing & connections, complete all as specified and as directed.
S&F in repairs Vitreous China Wash Down Water closet (Pedestal Pattern) 1st quality, approx size 350x475x390mm, white (excluding flushing cistern & flush pipe) including plastic water closet seat white, closed pattern with flat bottom and cover and mild steel CP or aluminised huiging device, making connections, complete all as specified and as directed.
S&F in reapair vitreous china wash basin, 1st quality, white, flat back, approx size 580x450mm excluding taps but including 32 mm bore brass chromium plated waste fittings, 32mm bore PVC waste pipe, MS brackets, complete all as specified and as directed.
S&F in repairs PVC valveless, double syphonic action type, flushing cistern, low level of 10 Litres capacity, white, with and including inlet, ball valve, float, 32mm dia flush pipe of polyethylane of low or high density or PVC, flushing bend & handles, also including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet & making connections, complete all as specified and as directed.
S&F in repairs brass chromium plated shower roses, 125 mm size with or without swivel joints (including Shower Arms) to 15mm bore steel pipe or union, complete all as specified and as directed.
S&F in repairs two way bib cock with flange, fancy type, cast copper alloy, chromium plated with crutch, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed.
S&F in repairs angular stop cock with flange, fancy type, cast copper alloy, chromium plated with crutch, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed.
S&F in repairs bib tap with flange, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule of 15 mm bore, complete all as specified and as directed
S & F in repairs toilet paper holder CP, fixed to wall with and including plugs & chromium plated screws, complete all as specified and as directed.
S & F in repair cast copper alloy, chromium plated, wall mixer, Non-telephonic shower system with Aerator for mixing hot & cold water, screwed down for 15mm bore iron pipe, complete all as specified and as directed.
S&F in repairs Pillar taps with Arrestor , fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15mm bore, complete all as specified and as directed.
S&Fin repair brass chrome finish health faucet with 12mm dia, 1.2 m long flexible tube and wall hook, complete all as specified and as directed. complete all as specified and directed.
S&F in repair corner shelf glass with chromium plated bracket guard and railing, complete all as specified and as directed.
S&F in repairs tubular towel rail, 20mm dia, D type, stainless steel, 600mm long between flanges, complete all as specified and as directed.
S & F towel ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed.
S & F in repair soap dish, vitreous China white, approximate size 160x 160x90mm, fixed to wall with and including plugs & chromium plated screws, complete all as specified and as directed.
S&F grating 75mm dia of SS , complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and as directed.
S & F in repairs 110 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, complete all as specified and directed. Note :- Item No.146 to 147 :- Quoted rates shall also be deemed to include for cutting of the holes where required/ directed and making good the same in CM 1:3 to match with the existing surfaces.
S & F in repairs 75 mm bore PVC (SWR) soil, waste, ventilating, rain water pipe type 'A', single socketed, (ISI Marked) in any length with and including ruber ring joints, complete fixed to wall with necessary PVC standard stay clamps etc, complete all as specified and directed. Note :- Quoted rates shall also be deemed to include for cutting of the holes where required/ directed and making good the same in CM 1:3 to match with the existing surfaces.
S&F in repairs for 75 mm bore outlet PVC (SWR) floor trap with and including grating, also including jointing with solvent cement and provision of PCC 1:2:4 (type B-1 : using 20mm graded stone aggregates) block of required size for fixing of floor trap, complete all as specified and as directed.
S&F in repair 110mm bore PVC (SWR) bends (any radius), with and including rubber ring joints, complete all as specified and directed.
S&F in repair 75mm bore PVC (SWR) bends (any radius), with and including rubber ring joints, complete all as specified and directed.
S&F in repair PVC vent cowl for 110mm bore PVC (SWR) pipe with and including rubber ring joints, complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level), Complete all as specified and directed.
M&L for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregates) as in sub base of flooring, complete all as specified and as directed.
M&L for providing 75mm thick PCC (1:3:6) type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even & smooth without using extra cement including provision of 10 mm joints (at an interval of 3 metre and turnings) duly filled with fine sand and bitumen in the ratio of 3:1, complete all as specified and directed.
M&L for factory fabricated Hydraulically machine pressed cement concrete chequered tiles of size 300x300X25mm thick (with grey cement and pigment), set in neat cement slurry including provision of 15mm thick cement screed bedding layer in CM 1:4, tiles joints shall be grouted and immediately after grouting, the joints shall be pointed flush in separate process in CM 1:3 mixed with pigments to match the colour of the Tiles, complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank 1000ltrs capacity, ISI marked, (cylindrical vertical type three-layered) with closed top including inlet,outlet and wash out holes, provision of G.I Fittings for fixing of the inlet, outlet and washout pipes, hoisted in position, complete all as specified and as directed.
S&F in repair Ball valves, high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe of 25mm bore (Minimum weight 455 grms), complete all as specified and as directed.
M&L for complete removal of existing treatment of walls, applying two coats of wall care Putty (minimum thickness of two layers shall be 2.00mm) and thereafter applying two coats of oil bound distemper, white or any tint as approved, over and including a coat of primer, complete all as specified and directed.
M&L for preparing new plastered surfaces of walls and finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm, complete all as specified and directed.
M&L for complete removal of existing treatment of walls, applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over surfaces, complete all as specified and directed.
M&L for precast Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggrgates ) set in CM 1:4 as in landing, cover slab (for manholes, chulla hoods, chajjas, water trough, mangers, shelves and similar article with plain faces including form work complete all as specified and as directed
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed.
S&F 3mm thick sheet glass of ordinary quality and glazing for Wooden Joinery or for steel surrounds with & including oil putty, in each pane n.exc 0.5Sq.m, complete all as specified and as directed.
S&F 4mm thick figured glass and glazing for Wooden Joinery or for steel surrounds with & including oil putty, in each pane n.exc 0.5Sq.m, complete all as specified and as directed.
Dismentling boarding of any description, fixed in any position with nails as in cub board shelves and partition etc, complete all as specified and directed.
M&L for 18mm thick plywood, grade BWR, type BB, fixed with and including screws to timber frame work as in cub board shelves/Partition/kitchen cabinate etc, complete all as specified and as directed
M&L for 12mm thick plywood, grade BWR, type BB, fixed with and including screws to timber frame work as in cub board shelves/Partition/kitchen cabinate etc, complete all as specified and as directed
M&L for 6mm thick plywood, grade BWR, type BB, fixed with and including screws to timber frame work as in cub board shelves/Partition/kitchen cabinate etc, complete all as specified and as directed
M&L for 0.9mm Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions, complete all as specified and as directed
S&F 50mm size Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type E-11, complete all as specified and as directed
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and as directed
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and as directed
S&F 100 mm long stainless steel fancy type handle, complete all as specified and as directed.
S&F telescopic sliders with ball bearings for kitchen shelves, 45mm wide, 450mm long, fully extendable to 900mm, fixed to plywood with screws, complete all as specified and as directed.
M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and as directed.
M&L for Second class hard- wood as in timber, clean swan scantlings including dismantling timber scantlings 40 sq. cm and over in section, in any position like trusses, rafters, purlins etc, complete all as specifiied and directed.
Dismantling timber scantlings under 40 sq. cm and over in section, in any position like trusses, rafters, purlins etc, complete all as specified and as directed.
M&L 2nd class HW plain fillets. square, rectangular or triangular in section area n.exc.3sq.cm, clean sawn, secured with nails or brads, complete all as specified and as directed.
M&L 2nd class HW plain fillets square, rectangular or triangular in section area exc.13 but n.exc 25sq.cm, clean sawn, secured with nails or brads, complete all as specified and as directed.
M&L 2nd class HW plain fillets square, rectangular or triangular in section area exc.6 but n.exc13sq.cm, clean sawn, secured with nails or brads, complete all as specified and as directed.
M&L 12 mm Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/aluminium frame work as in cupboard shelves, partition, etc, complete all as specified and directed.
S&F 125mm size Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-12, complete all as specified and as directed
S&F 75mm size Rim latch with two levers, of brass body. polished bright; with brass knob or lever handle and fixed, complete all as specified and as directed
S&F 300mm long Mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and as directed.
S&F 150 mm size Extruded brass handles, fabricated type polished, complete all as specified and as directed.
S&F Mortice lock brass body, vertical type, size 65 mm, 2 levers, complete all as specified and directed.
S&F in repairs sink without drainage board made of 1.00 mm thick sheet of stainless steel (Solitaire range 304 super steel) for kitchen or laboratory with and including plugs, washers, wastes; 40mm bore PVC waste pipe, also including bedding in cement mortar 1:3 on dwarf wall or including providing mild steel cantilever brackets and connecting union to pipe, overall approx size 405mm x 460mmx203mm with bowl size 405mm x 354mm x 203mm, complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) as in benching, cover fillets, roof kerbs, kerbs PCC padding over roof and of any description & in any position not otherwise specifically provided-for, including taking down existing un-servicable waterproofing treatment from roof slab surfaces, roughening of old concrete surfaces by picking, cleaning the surfaces by wire brush and also including disposing off the retrieved debris outside the premises / site, complete all as specified and as directed.
M&L for 25mm thick (average thickness) cement concrete type B-0 (1:2:4) (Using 12.5 mm graded stone aggregates) mixed with water proofing compound as in padding over roof etc, including finishing the exposed surfaces of the concrete even and smooth without using extra cement, complete all as specified and as directed. Note:- Payment for WPC shall be measured and paid for separetely.
M&L for brushing neat cement slurry with 3.00 kilogram of cement per square metre over roof surfaces etc, providing 10 mm thick plastering in cement mortar 1:4 mixed with water proofing compound, finished even and smooth, complete all as specified and as directed. Note :- Supply only water proofing compound shall be measured and paid separately under the respective Item.
M & L for APP modified roof treatment over existing roof slab etc to be executed through approved authorised applicator of the membrane manufacturer with the following specifications, complete all as specified and directed:- (a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying 3mm thick APP modified water proofing polymeric membrane reinforced with non woven polyester fibre using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.00 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sqcm. (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : > 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2. (viii) Water absorption,% - Not more than 0.15. (ix) Cold flexibility - (-) 50C. (x) Dimentional stability % change = Maximum 1%. (xi) Heat Resistance - Does not dirp at 1200 C Note : The quoted rate shall also be deemed to include for cutting grooves of size and shape as required in the parapet wall for tackling the APP membrane in the wall including making good the surfaces of groove as well as damaged surfaces of the wall after tackling of membrane in CM 1:3 to match with the adjoining surfaces.
M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane, complete all as specified and directed.
M&L for preparing new wooden surfaces of any description not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed .
M&L for preparing new wooden surfaces of any description not otherwise described, n.exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed .
M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed
Taking down carefully existing aluminium/copper point wiring (light / fan / socket or power point) complete, with all unserviceable fittings such as switch socket combination, switches, sockets, regulator, ceiling rose, utility light fittings and lamp holders etc and making good the disturbed surfaces of walls, roof and floor etc to match with the existing specification, complete all as specified and as directed.
Taking down existing unserviceable submain wiring (including conduit /casing -caping), any size and making good the disturbed surfaces to match with the adjoining surfaces, complete all as specified and as directed.
M&L for point wiring for one light/fan points controlled by 1 one way switch with 1.5 Sqmm PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable 1100 Volts grade drawn through and including rigid non metallic PVC concealed conduit (medium grade) not less than 20mm dia, (also including conduit fittings & Junction boxes etc, along with 1.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, connected to earth dolly and to be connected to modular box, modular plate and frame for mounting switches, sockets, fan regulators etc, testing on completion also including cutting chases for concealed conduit, boxes etc, pinning in, making good the surfaces in CM 1:3 to match with the adjoining surfaces, complete all as specified and as directed. Note: (a) Red /yellow/ blue colour cable should used for phase connection, black colour cable should be used for neutral connection and green colour cable should be used for earthing connection, separate cable for earthing and neutral to be used for each individual circuit from the distribution board/switch board. (b) Joints in wire/cable in between switch board and points are not allowed. (c) All socket points shall be provided to table top hight for easy operation. (d) All earth wire shll be terminated to DB's earth bus for further conncetion with earth pit. (e) Quoted rate of the bidder deemed to be inclusive of modular box, packing plate, top cover and allied items.
All as per Item No 198 above but for one switch socket outlet 3 pin, 5 Amp on independent board all as specified and as directed.
All as per item No198 here-in-before but for one socket with other switch/switch socket outlet 3 pin, 5 amps on the same board , complete all as specified and as directed
All as per item No198 here-in-before but for one socket with other switch/switch socket outlet 5 pin, 15 amps on the same board with cable 2.5 Sq mm size, complete all as specified and as directed
All as per item No 198 here-in-before but for 5 pin 15 Amp switch socket outlet, independent with 2.5 Sqmm single core multi-stranded copper conductor cable (FRLSH) along with 2.5 sqmm continuous PVC insulated unsheathed single core multi-stranded copper conductor (FRLSH) cable for earth continuity wire, complete all as specified and as directed.
S&F modular type switch piano, single pole, one way, one module, 6 amps, complete all as specified and as directed.
S&F modular type switch piano, single pole, one way, one module, 16 amps, complete all as specified and as directed.
S&F modular type socket outlet, 2/3 pin,6 Amps, combined 2 module, complete all as specified and as directed.
S&F modular type socket outlet, 2/3 pin,16 Amps, combined 2 module, complete all as specified and as directed.
S&F ceiling rose, 3 phase, PVC/ polycarbonate, isolated body, complete all as specified and directed.
S&F Lamp holder, PVC/Polycarbonate type with back plate, complete all as specified and directed.
S&F modular fan regulator rotary type 2 module, 230V,AC,50Hz not less than 100 watt, complete all as specified and directed.
S&F MCB SP, 10kA, 230V, 50Hz, 6 Amps, compatable for DIN rail "C" series in accordance with IS/IEC 60898-1-2002, 240V, 50Hz, 10 kA suitable for inductive loads complete with connection, complete all as specified and directed.
S&F MCB SP, 10kA, 230V, 50Hz, 10-20 Amps, compatable for DIN rail "C" series in accordance with IS/IEC 60898-1-2002, 240V, 50Hz, 10 kA suitable for inductive loads complete with connection, complete all as specified and directed.
S&F MCB SPN, 10kA, 230V, 50Hz, 32 Amps, compatable for DIN rail "C" series in accordance with IS/IEC 60898-1-2002, 240V, 50Hz, 10 kA suitable for inductive loads complete with connection, complete all as specified and directed.
S&F MCB protected POWER UNIT with one 25 amps socket (including 3 pin plug top) including MCB DB and starter 25 amps rating with six module plate and flush PVC box and electrically connceting up fixed, complete all as specified.
S&F distribution board(DB) SPN, 12 ways, double door, 100A rated copper bus bars, earth bar, neutral links complete including provision of blanking plates as required & fixed flush to wall and making good the disturbed surfaces in CM 1:3, complete all as specified and directed.
S&F distribution board(DB) SPN, 4 ways, double door, IP-43, with and including MCB, TPN, 63 Amps, 10kA, 'C' series complete with electric connection and making good the disturbed surfaces in CM 1:3, complete all as specified and directed.
M & L for sub main wiring with 2 run of single core FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.50 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.50 sqmm as earth continuity conductor drawn through and including PVC concealed conduit, medium grade, 25mm bore complete with fittings, PVC Junction Boxes, fixing accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces , complete all as specified and directed. Note for Item No 216 to 218:- For payment purposes, 2 runs of main cable (each of 1RM), 1 run of earth continuity cable (1RM) and one run of conduit (1RM), all together shall be considered as "1RM".
M & L for sub main wiring with 2 run of single core FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.00 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.00 sqmm as earth continuity conductor drawn through and including PVC concealed conduit, medium grade, 25mm bore complete with fittings, PVC Junction Boxes, fixing accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces , complete all as specified and directed.
M & L for sub main wiring with 2 run of single core FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.00 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.00 sqmm as earth continuity conductor drawn through and including PVC concealed conduit, medium grade, 25mm bore complete with fittings, PVC Junction Boxes, fixing accessories, also including cutting chases, pinning in, making good to facing and pointing in using cement mortar 1:3 and making good disturbed surfaces to match with the adjoining surfaces , complete all as specified and directed.
S&F LED Bulk Head fitting of 9/10W indoor/outdoor luminaries with, including electronic driver and LED lamp, including provision of twisted copper conductor flexible wire from ceiling rose to connector, coforming to the following specifications:- (a) System Watts /Lumens- 9 to 10 w/Total system lumen not less than 800Lm. (b)Housing: Extructed polycorbonate/Engineering plastic. (c) IP rating: IP65 (d) Front Cover: Prismatic Diffuser (e) Mounting: Suitable for wall/ceiling (f) Finish: Smooth Finish (g) Lamp: SMD LED high bright (h) Heat Sink: As per OEM's design
S&F LED tube light fittings 4 feet with 18/20W surface and wall mounted , indoor luminaries with and including electronic driver and LED lamp including provision of twisted copper conductor flexible wire from ceiling rose to connector, coforming to the following specifications:- (a) System Watt /Lumens- 18 to 20 w/Total system lumen not less than 2000Lm. (b)Housing: Extructed polycorbonate. (c) IP rating: IP20 (d) Front Cover: Acrylic/polycarbonate cover frosted (e) Mounting: Suitable for wall/ceiling (f) Finish: Smooth Finish (g) Lamp: High bright LED (h) System efficacy(lm/watt): Not less than 100 lm/watt (j) Colour temparature: Not less than 5700K (k) Colour rendering Index(CRI): Not less than 80 (l) Life: Not less than 25000 hrs of operation (m) Optics: Designated for optimum light distribution (n) Control Gear: Inbuilt electronic driver with APFC, PF not less than 0.95 and THD not more than 20% of standard operating voltage 180-270V Ac, 50 Hz (o) Surge Protection: Inbuilt surge protection minimum 2kv (p) Heat Sink: As OEM's design
S&F energy saving BLDC ceiling fan; 5 star rating, Type of motor - Brush Less DC Motor (BLDC) and Input Power - 32 to 35 Watts with full speed and reduced power consumption with reduced speed technology, Voltage- 90-300V AC, 50Hz, single phase, RPM - 340 to 375 rpm, Blades- Decorated, Sweep - 1200 mm, Air delivery - Not less than 210 CMM with service value 6.00 BEE and Colour - Glow white/ Toast Brown/ Gloss Black or others as approved by GE, complete all as specified and as directed.
S&F energy saving BLDC ceiling fan; 5 star rating, Type of motor - Brush Less DC Motor (BLDC) and Input Power - 32 to 35 Watts with full speed and reduced power consumption with reduced speed technology, Voltage- 90-300V AC, 50Hz, single phase, RPM - 340 to 375 rpm, Blades- Decorated, Sweep - 1200 mm, Air delivery - Not less than 210 CMM with service value 6.00 BEE and Colour - Glow white/ Toast Brown/ Gloss Black or others as approved by GE also including taking down of existing Fan and depositing the same in MES store yard of GE, complete all as specified and as directed.
S&F recess mounted LED down light fittiings round /square type, 15/16 Watt, indoor luminaries with including electronic driver and LED lamp, including provision of twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified and as directed.
S&F recess mounted LED ceiling light fittiings square type, 2 ftx2ft with 34/36 Watt, indoor luminaries with including electronic driver and LED lamp, including provision of twisted copper conductor flexible wire from ceiling rose to connector, complete all as specified and as directed.
Supply, fixing, commissioning and testing hi wall mounted split type air conditioning units (indoor/outdoor) inverter type complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.5TR, complete all as specified and as directed. Note: The quoted rate of the bidder is deemed to be included the cost of cutting holes/chases to wall/ ceiling and making good the disturbed surfaces (If any).
S&F sturdy Engineering plastic body exhaust fan, copper winding of 300mm sweep, 1200RPM, 230 volts, AC, single phase, complete with & including accessories, louver shutters, provision of PVC copper conductor cable for making connection from existing ceiling rose, making opening for fixing of the exhaust fan & making good the surfaces of the opening with CM 1:3 to match with the existing surfaces, complete all as specified and directed.
M&L earthing complete with galvanized steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanized iron earth lead wire of 4 sqmm by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in Electrical Plate No 5 of SSR Part - I, including necessary excavation and earth work, P.C.C (1:3:6) type C-I with 50 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar), including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade), wire mesh, aluminium lugs, complete in all respect, GI earth wire protected by 25 mm bore (medium grade) galvanized iron pipe and other end connected with main switch board or Earthing test point as directed, including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessary testing on completion including dismentaling old unsv ones complete all as specified and as directed by the Engineer-in-Charge.
Supplying, laying, jointing and testing XLPE insulated, armoured, heavy duty, electric power cable (Heavy duty) with stranded aluminium conductor 1100 volts grade, cross sectional area 10 Sqmm x 4core in trenches /along poles/on wall etc , complete all as specified and as directed by the Engineer-in-Charge. Notes for item No 228. : (i) Excavation and earth work, sand cushioning, protection covers shall be measured and paid for separately. (ii) Unless otherwise directed by the GE, the cable shall be procured by the contractor in single length (as manufactured) to meet the actual length of cable as required at site. However, for payment purpose, the length actually ordered & laid shall be measured and paid for.
M&L for Sand cushioning in trenches for cushioning of underground cable including spreading, levelling, well ramming in layers not exceeding 25cm in thickness (8cm deep before laying of cables and 15 cm over the cable) , complete all as specified and directed by the Engineer-in-Charge.
Material and labour for well burnt Sub-class 'B' old size bricks, best quality locally available laid flat, dry in trenches for cable protection, complete all as specified and as directed by the Engineer-in-Charge.
Prahalad Rai
B.B. Enterprise
MS ORIENT ENGINEERING WORKS
M/S JAGRITI ENTERPRISES
Shri U K Ghosh
M/S B D ENTERPRISE
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .