Plastic Waste Collection and Processing Centre at Mouje Karajgaon, Taluka Bhokardan, District Jalna, under Swachh Bharat Mission (Gramin) Phase-II.

Item No 1 Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. 0.4320 Cum x 44No = 19.008

Item No 2 Providing dry trap/ granite/ quartzite/ gneiss,rubble stone soling in 15 cm to 20 cm thicklayers including hand packing and compacting, etc. complete.

Item No 3 Providing and laying in situ 1:2:4 (M-150) grade of C.C. of trap/granite/quartzite/gneiss metal for foundation and bedding including dewatering. Form work compacting and curing. Finishing etc. complete with initial lift of 1.5 M below/above ground level.

Item No 4 Providing and casting in situ C.C. of trap/ granite/ quartzite / gneiss metal of approved quality for RCC works as perdetailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work,compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth andeven surface wherever necessary orroughening if special finish is to be provided and curing, etc. complete. (Byweigh batching and mix design for M-250and M-300 only. Use of L&T, A.C.C.,Ambuja, Birla Gold, Manikgad, Rajashree,etc. cement is permitted.) (Excluding)For Footing

Item No 5 Providing and casting in situ C.C. of trap/ granite/ quartzite / gneiss metal of approved quality for RCC works as perdetailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work,compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth andeven surface wherever necessary orroughening if special finish is to be provided and curing, etc. complete. (Byweigh batching and mix design for M-250and M-300 only. Use of L&T, A.C.C.,Ambuja, Birla Gold, Manikgad, Rajashree,etc. cement is permitted.) (Excluding)

Item No 6;- Providing and casting in situ C.C. of trap/ granite/ quartzite / gneiss metal of approved quality for RCC works as perdetailed drawings and designs or asdirected by Engineer-in-charge including normal dewatering, centering,form work,compaction, finishing the formed surfaces with C.M. 1:3 of sufficient minimum thickness to give a smooth andeven surface wherever necessary orroughening if special finish is to be provided and curing, etc. complete. (Byweigh batching and mix design for M-250and M-300 only. Use of L&T, A.C.C.,Ambuja, Birla Gold, Manikgad, Rajashree,etc. cement is permitted.) (Excluding)

Item No 7 Providing Autoclaved Aerated Concrete Block masonary of conforming toIS:2185(Part3) -1984 in extra fine jointing mortar of fixo block of UltraTech or equivalent in superstructure including striking joints,raking out joint sand scaffolding etc.Complete.(The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Item No.8 Providing and laying Rough Shahabad Stone Flooring 25mm to 30mm thick and of required width in plain/diamond pattern on abed of1:6C.M.including cement float,striking joints, pointing in cement mortar 1:3 curing and cleaning etc. complete.

Item No.9 Providing structural steel work in single stanchions composed of RSJ, channel,etc. with caps, bases, mild steel plates,angles, brackets, cleats, gusset plates,anchor bolts, etc. as per detailed design and drawing or as directed by Engineer inchargeincluding cutting, fabrication,hoisting, erecting, fixing in position, makingriveted / bolted / welded connections andone coat of anticorrosive paint and over it two coats of oil painting, etc. complete. (Bd