Krishnagiri Dt Bargur Block Construction Anganwadi Building at Mylampatti Puliyampatti Panchayat BRG_96

Amount

1.Construction of Anganwadi Building at Mylampatti Village H/O Puliyampatti Rs-14.31 Lakhs

Earth work excavation for foundation in all class of soils except hard rock requiring blasting including cost and conveyance of all etc.,complete

Supply and Filling of River Sand including cost and Conveyance of all site etc. Complete.

Supply and Filling the basement Excavated earth other than sand including cost and Conveyance of all site etc. Complete.

Cement concrete 1:4:8 Using 40mm ISS size Hand Broken granite stone Jelly for Foundation and Flooring including labour charges for mixing concrete watering and laying the concrete in layers

Brick work using country bricks of size 83/4"x41/4"x23/4" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. .

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Centering For BGL

For Column

For Lintel & Roof level Beam

Sunshade

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs

Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs

Supplying and Fabricating and placing in position MS steel or Ribbed Tor Steel for all Reinforced Cement Concrete works as per the design given including cost of steel and binding wire in all floors etc, Complete complying with stanard specification.(MS

Finishing the exposed surface of RCC item of work such as slabs beams, sunshade, facia, canopy slab, staircase waist slab etc., with CM 1:3, 10mm thick. etc., complete complying with standard specifications and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Weathering course concrete using best quality broken brick jelly of size 20mm in pure slacked lime over the RCC roof slab in th proportion of brick jelly to lime being32:12.5 by the volume and laid over a single layer and consolidated to the required dses

Finishing the top of roof with one course of machine pressed tiles of size 20 x 20 x 2cm of approved quality laid in CM 1:3, 12mm thick. With water proofing compound confirming to IS by 2% by weight of cement used & the joint pointed neatly to full depth

Paving the floor with coloured joint free virtified tiles of size 600x600x8mm of best quality and approved variety complying/conforming ISI specification land over cement mortar 1:3(one of cement and three of sand) 20 mm thick and pointed with same colour cement neatly etc., all complete

Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) Using anti-skid tiles (Observed Data)

Dadooing of walls with colour glazed tiles of size 150x150x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc

Providing the following thickness of Granolothic pattern floor finishing with plain cement concrete cc 1:2: 4 using 10 mm to 12 mm size hard broken stone jelly and the top rubbed smooth etc complete complying with standard specification

Distembering two coats including priming coat with best approved distember and primer including costand conveyance of all materials to site and all labour charges etc

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supply and Cost of Steel door , Window, Ventilator

Door (0.75x 1.20m) D

Door (0.90 x 2.10m) D1

Door (1.10 x 2.10m) D2

Windows (1.20 x 1.30m)

Ventilator (0.60x0.45m)

Ventilator (0.90x0.45m)

Fixing Charges of Steel doors, windows and ventilators

For Door Fixing Charges

For Window Fixing Charges

Supply and Fixing Following thickness of cuddapah slab for cupboard

Provision for Electrification

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 20

Light Point & Fan Point

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Plug Point

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 36

Power Plug Point

Supply and run of 4x6 sqmm (84/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 68

Service Wire

Supply and run of 4 X 6sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 73

Gi Service Pipe

Supply and fixing of 300mm (12") AC ceiling fan complete with SD 11

Exhaust Fan

Supply and fixing of CFL bulb SD no 80

Provision of Water Supply & Sanitary arrangement

500 Ltr Tank

32mm pvc pipe

32mm pvc bend

25mm x20mnm pvc Reducer

20mm Tap

110mm Pvc Pipe

110mm Pvc Bend

110mm Pvc Tee

Provision for RWH including pipes

Provision Of IWC

Provision Of EWC

Provision for animation drawing

Provision for Leach Pit

Provision for writing Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Murugan Contractor (BID ID -1558612)