SPECIAL REPAIR TO ROADS AT MILITARY STATION NEW AND OLD CANTT KAPURTHALA UNDER GE KAPURTHALA

Amount

Material & Labour for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt and applying evenly a priming/tack coat with paving bitumen VG-10 at the rate of 5 Kg per 10 Sqm of road surface, laying, rolling, consolidating 30 mm thick (consolidated thickness) bituminous premixed asphaltic semi dense concrete with 5.5% binder content (VG-30) by weight of total mix laid with mechanical paver roller and compacted to required camber and gradient and rolled with pressure roller and 8 to 10 tonne power road roller to achieve a uniform smooth surface with Pneumatic vibratory roller complete all as specified and directed. Note: Mix shall be prepared in Hot mix plant as per job mix formula obtained from authorised testing lab and laying will be done by mechanical paver.

M&L for repair to pot holes any depth not exceeding 1 Sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in road path etc cutting around edges, at least 25mm in depth and making good by applying tack coat using paving bitumen VG-10 @ 5 Kg per 10 Sqm, putting in semi dense asphaltic concrete well rammed and sealed with binder using paving bitumen @ 9.8 Kg per 10 Sqm blinded with 0.09 cum stone chipping 6.3mm size and again well rammed (including supply of premixed macadam binder and chippings) and compacted to required gradient with 8 to 12 tonne power road roller, depth of pot hole exceeding 30mm complete all as specified and directed.

Material & Labour for providing and marking broken centre line /side lines / Zebra lines, dashes, arrows etc. on road pavement and the like of any description and width with thermoplastic paint hot applied with machine conforming to BS-3265 and according to the specification laid down by IRC and MOST (Ministry of Surface Transport) specification 2001 (4th revision) complete all as specified and directed. Make of paint :- 3M/VERTEX/JCC

Supply & fix in repair road stud two way reflective of size 100mm x 110mm x 20 mm made up of plastic body and available in colour red, amber, white etc complete all as specified and directed. Make : Dark Eye Cat Part No. DA-52 or equivalent of 3M/Shakti.

Supply & fix in repair solar road stud high polymer of size 125mm x 125mm x 25 mm made from aluminium alloy, solar powered by nionocrystal solar panel, one high capacity Ni-Cd rechargeable battery, view distance approx 1000 mtrs, LEDs-010mm, 3 pieces each side and total 6 pieces are used for high brightness of different colours, battery back up upto 12 hours of continuous lighting at night , available in colour red,amber,green complete all as specified and directed by Enginner-in Charge. Make : Dark Eye Cat Part No. DA-110 (DHRUV) or equivalent of 3M/Shakti

Supply & fix in repair solar delineator made of polycarbonate and toughened aluminium alloy body, height 145mm, diameter 80mm, delineator height 80mm comprises of 4 super bright LEDs which give 360 degree viewing, solar panel-2.5V, 1.25 V rechargeable battery-01 No. Delineator also has high intensity reflective band of 25mm width for extra visibility including post of size 1000mm x 47mm powder coated MS pipe and including 30x15cm size block of PCC 1:2:4 complete and as specified and directed by Enginner-in Charge. Make : Dark Eye Cat Part No. DA-112 or equivalent of 3M/Shakti.

DUGGAL CONSTRUCTION CO