Development of Immersive experience at Shore Temple Mamallapuram Tamilnadu

Amount

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness,Complete as per standard specification

Dismantling of Existing Buildings Dismantling, clearing away and carefully stacking the useful materials for re-use / auction and disposal of non usable materials complying with standard specification and as directed by the departmental officers.

Dismantling of Brick / Stone Masonry in cement mortar walls under 3m high and disposal of dismantlied material up to a lead of 5 Km,Complete as per standard specification

Removing asbestos cement sheet roof without roof timbers and disposal of dismantlied material up to a lead of 5 Km,Complete as per standard specification

Dismantling corrgated iron sheet roofing with pan tiles over without roof timbers and stacking at site as per direction of office in-charge for rework / auction,Complete as per standard specification

Wrought and put-up Framed Timbers in roofs / floors and stacking at site as per direction of office in-charge for rework / auction,Complete as per standard specification

Doors and Windows including removal of frames, hinges and fastenings and stacking at site as per direction of office in-charge for rework / auction,Complete as per standard specification

Dismantling Plain Cement Concrete by using deploying machineries and disposal of dismantlied material up to a lead of 5 Km,Complete as per standard specification

Dismantling Reinforced Cement Concrete by using deploying machineries and disposal of dismantlied material up to a lead of 5 Km,Complete as per standard specification

Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs and disposal of dismantlied material up to a lead of 5 Km,Complete as per standard specification

Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification.

Cement Concrete 1:4:8 (One cement, Four crushed stone sand and Eight hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification.

Cement Concrete 1:1.5:3 using 20 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and complying with standard specification and as directed by the departmental officers. a)Foundation and Basement

Brick Masonry Work with Aerocon Block of size 600mmx200mmx150mm in Cement Mortar 1:5 complete complying with standard specification.

Foundation and Basement

For Ground floor

RR Masonry work in Cement Mortar 1:5 using best quality Course Rubble Stone for Compound wall including curing, etc., complete complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Foundation and Basement

For Ground floor

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards.

Foundation and Basement

Bored cast-in-situ M25 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. (450mm Dia)

Bored cast-in-situ M30 grade R.C.C. Pile excluding Reinforcement complete as per Drawing and Technical Specifications and removal of excavated earth with all lifts and lead upto 1000 m. (450mm Dia)

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton.

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Supplying, fabricating and placing in position Mild Steel / TMT Steel for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design and completed as per directed

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200x600 / 150x150 and 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with pre-polished concrete anti-skid step tiles size of 305mmx305mm x20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Supplying, fixing, testing and commissioning approved make 15mm CP CP Two Way Bib Cock wit Faucet with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., etc., complete as per standard speicification.

Supplying and fixing of Aluminium sandwich roof sheet of 30mm thick PIU thermoset polymeric material with all necessary accessories complete as directed and , complete complying with standard specification

Providing Ferrocement architectural structures like column sunshade, facading etc,for appearance purpose in c.m 1:2 - 50mm thick reinforced with 6mm rods and stirupps covered with chicken mesh plastered and painted to finish.,complete as directed

Dadooing walls with Polished Rajasthan Kota Stone Slabs of 20mm thick with Machine Cut Edges of size 2’0” x 2’0” and above, and similar varieties of suitable sizes of best approved quality, Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200x600 / 150x150 and 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with matching colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard specification.

Providing and fixing baffle tube ceiling system comprising pre-coated/powder-coated aluminum or galvanized steel baffles of size 60 mm (height) x 50 mm (width) x 2950 mm (length), spaced at 60 mm center-to-center, suspended from ceiling using suitable suspension system including carriers, hangers, and fasteners, complete as directed

Proving and fixing grid system. For applications requiring a black ceiling with low light reflection and good sound absorbing properties. Size 600x600x15mm, Manufacturing- Manufactured in Sweden, production unit is ISO 14001 certified. Acoustics-Sound absorption(Alpha W) - 0.95 at 200 mm o.d.s as per EN ISO 354 Acoustics-Sound absorption Class - Class A at 200 mm o.d.s as per EN ISO 11654 NRC - 0.9 NRC as per ASTM C 423 Indoor Air quality - Complying with the French regulation on VOC emissions, A level. Certified by the Finnish Building Information Group (RTS) with the M1 label.Certified by Eurofins Indoor Air comfort® . Product Certified under GRIHA council of India for Green Ratings Environmental Footprint - Environmental Product declaration (EPD) acc to international ISO 14025 & EN 15804 series of standards. Circularity - Minimum post-consumer recycled content 55%, Fully recyclable Fire Safety - Tested and classified as non combustible according to EN ISO 1182 with reaction to fire classification class A2 s1 d0 according to EN 13501-1 - European Standard., complete as directed

Providing and fixing Acoustic Wall Panelling (equivalent to Armstrong) in channelled wood works perforated panels of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental Engineer made of a high density fibre board with minimum 725 kg./m3 density substrate with a laminated facing as per the approved shade and finish and a melamine balancing layer on the reverse side. The boards shall have a special peforation pattern where the visible surface has a "Helmholtz" fluted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be "tongue-and-grooved" to receive special clips for installation. The back of the perforated panel shall have sound absorbing non woven acoustical fleese having NRC of 0.52. The panels shall be mounted on special A29aluminium splines using clips provided by Armstrong .,complete as per standard specification

Supply and installation of Anutone (or) Euivalent Brand of Acoustical False Ceiling of subtex nubby, square edge, glass fibre core fully encapsulated ceiling tile of size 595 x 595 x 15mm having volume density 120 Kgs / m3, weight 1.8 / 2.4 / 3 kg / m2 which is suspended by using 0.3mm thick skelet trelis T15 metal grid system. Skelet trelis T15 metal grid system of 600 x 600mm module includes skelet WA15 W30 wall angle with unequal flanges of 15 / 19mm, length 3000mm, fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers. Then suspend the skelet MT15 W36 MainT with flange width 15mm, height 32mm and length 3600mm, from the soffit slab with help of soffit cleat and wire rod with leveling spring clip at 1200mm centres. Skelet CT15 W12 CrossT with flange width 15mm, height 26mm and length 1200mm is interlocked into the pre-cut slots in the Main T15 at 600mm centers in the perpendicular direction to the Main T15. Finally, the skelet CT15W06 CrossT with flange width 15mm, height 26mm and length 600mm are interlocked into the precut slots in the CT15W12 CrossT in direction parallel to the Main T15 to result in 600 x 600mm module. The subtex nubby square edge of size 595 x 595 x 15mm shall be placed into the grid size of 600 x 600mm. Ensure arrow marks behind the tiles are oriented in one direction to achieve uniform shade. The systems to achieve noise reduction coefficient not less than 0.9 NRC, so as to have an neat appearance as directed by the department offices. The cost includes, cost of material, cost of labour, scaffolding, transportation, conveyance, etc. complying to standard specication

Supply and fixing of TV commercial model with 3 years warranty of 75 inch LED display interactive smart android television with necessary fixing accessories as required as per the site condition(Make: Samsung, LG OR Equivalent).

Content Curation: Scriptwriting, voiceover, music composition, storyboarding, and AV production in two languages includes comprehensive services for creating high-quality audiovisual content. This encompasses drafting engaging scripts in both languages tailored to the project theme, professional voiceover recording with native speakers for authenticity, original music composition to complement the narrative, detailed storyboarding to visualize the storyline and production flow, and full-scale audiovisual production to deliver a polished final output. Each component is designed to seamlessly integrate with the other, ensuring consistency and cultural relevance across both languages, providing an immersive and impactful viewer experience.,complete as directed

Supply Installation Testing & Commissioning of Media Server with 4 HD outputs as required with original OS license - Intel CPU i7 Latest Generation with rugged cooling system having 16GB RAM or more and 500 GB SSD and appropriate GPU, 2 X USB3 port and 1 X 1 GB/s Ethernet port and ASIO sound card along with required server rack.,complete as directed

Supply Installation testing and commissioning the Audio Guide Charging Station should be a modular and compact unit designed for secure and efficient charging of up to 20 audio guide devices simultaneously. Each station should include individual charging slots with LED indicators for charging status, an integrated power supply unit, and protection against overcharging, short circuits, and overheating. The unit should be constructed from durable, corrosion-resistant materials with a sleek finish, suitable for indoor installation. Dimensions should be approximately 600mm (L) x 400mm (W) x 200mm (H) or as per site requirements, with provision for wall-mounted or tabletop installation. The station should include cable management and ventilation features, with compatibility for global power standards (100-240V, 50/60Hz).,complete as directed

Supplying, carving, transporting, and installing Pallavan style lion, elephant, and pillar sculptures on the prepared platform, crafted from premium quality white granite, with heights ranging from 1.90 m to 2.10 m, strictly in accordance with approved design, drawings, and architectural details, complete as directed

Supply & Installaton Carpet Tiles of size 25x 100 cm - 100% Olefin fibre Solution Dyed StableShield 100% Vinyl of 8 mm total thickness.,complete as directed

Supplying, installing, testing, and commissioning of 2 Ton capacity split type air conditioner (wall-mounted) comprising of indoor & outdoor units, including remote control, mounting brackets, copper piping, electrical connections, drainage piping, and initial gas charging. All complete as per manufacturer’s specifications and direction of Engineer-in-Charge.

Supplying and fixing customised digital printed wallpaper with leather texture finish, printed on high-quality non-woven/vinyl wallpaper using UV or eco-solvent ink technology. Wallpaper to be applied on properly prepared wall surfaces using suitable adhesive, complete as directed.

Providing and fixing auditorium seats size: Chair arm rest to arm rest: 21" standard, Height: 38”-40” from floor Side Panel: 9mm Ply upholstered with fabric. Side Stand: 1” x 3” Iron Pipe,Armrest (Handle): PU, Leg: Chair leg will be fixed. Chair seat: Auto Tip Up, Inner material: Molded PU.Seat: 45-50kgs/m3; Back: 45-50kgs/m3; Inner structure: Ply frame in Seat and Iron Frame in Back. The Auditorium Chair manufacturer must be as per the below Picture. Item to include all material, labour and carriage in all leads and lifts complete as per entire satisfacton of the Project Manager.,complete as directed.

SITC of Water And Low Fog Juice Based LOW FOG Machine with the Following Specification : Max Power - 1600W, Max Output Volume - 11,000-12,000 cuft/min, Fluid Consumption @ full volume - Appr. 40 min/L, Max Coverage- Appr. 200 ㎡, Heat Up Time - Appr. 2 min, Fluid Low Fog Liquid Tank Capacity - 2 L, Water Chamber Capacity - 7.3 L, Control：Wireless W-4, DMX-512 (2CHannel), IP20.,complete as directed.

Supply and fixing of high-quality profile lights with fixtures and accessories . The lights must feature energy-efficient LED technology, colour temperatures ranging from warm white to cool white (2700K to 6500K), and a minimum CRI of 60. Each fixture should be constructed from corrosion-resistant materials, suitable for both indoor applications, Accessories such as mounting brackets, power drivers, and wiring must be provided to ensure seamless integration .,complete as directed.

Design, fabrication, and installation of the lit SHORE TEMPLE LOGO branding. This will feature high-quality, durable materials suitable for outdoor and indoor use, with LED illumination for enhanced visibility. The branding will be designed to align with the Shore temple look and feel and aesthetics and standards, ensuring precision and a professional finish. The work includes all necessary electrical connections, mounting structures, and finishing touches for a complete and visually striking installation.,complete as directed

The LED branding signage should use high-quality, weatherproof, and energy-efficient LED panels with a lifespan of at least 50,000 hours. It must have a sturdy aluminum or stainless-steel frame with a rust-resistant finish for outdoor durability. The display should be high-resolution with even brightness and a minimum pixel pitch of 10mm for clear visibility day and night.,complete as directed

Providing and installing task chairs made in SS and teflon body with approved washable fabric to be placed at Staff room as per entire satisfaction of the engineer-in-charge.

Supplying and installing wooden work in Column, Beams and Purlins elements, securely fixed in position using hold fast lugs or dash fasteners of the required diameter and length, as specified in the approved design and drawings.,complete as directed

Supply of cut stone for carrying out Stone Column, Beam for Covered Canopy (Pergola) and other works as per approved design above 10 feet length upto 14 feet length.,Complete as directed.

Supplying, erecting and Fixing of Granite stone bench with back rest. Bench shall consist of 2 nos. L shaped bases support in back height 900mm, front height 450mm, base width 600mm and 5Nos Stone planks in size of 1800x100x50mm all parts to be joined with galvanized nuts and bolts of suitable size.,compete as directed

Supplying, erecting and Fixing of cast iron bench with back rest. Bench shall consist of 2 nos. L shaped bases support in back height 900mm, front height 450mm, base width 600mm and 5Nos steel planks in size of 1800x100x50mm all parts to be joined with galvanized nuts and bolts of suitable size.,complete as directed.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats (one coat enamel paint & one coat Anti Corrosive Paint) of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification.

Supplying, fabricating and fixing stainless steel hand railing as per approved drawing with stainless steel sections conforming to Grade 304 for baluster, top and intermediate horizontal members including SS heavy floor flange, anchor plate, anchor fasteners, grouting, SS supports, SS base plates, SS counter sunk screws, stainless steel welding, grinding, buffing, polishing, lacquer finishing, to present seamless finish, all of make approved by engineer-in-charge including cost and conveyance of all material to site, all labour charges, all incidental charges, T&P and their operational charges etc., complete complying with standard specification.

ABS DOOR / EQUIVALENT Specification: Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm - 2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm. PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges - 3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work complete complying with standard specification.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as directed

Providing and fixing 13.52 mm thick laminated toughened frameless glass panel, including edge polishing, SS 316 patch fittings/U-channel, silicone sealant, anchoring, and necessary civil supports complete all complete as directed

FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers

UPVC Window Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work,complete complying with standard specification.

Supplying and providing chain link fence with RCC posts. The RCCposts will be of 2.5m c/c and of 2.75m height. The post will be100mm square at top and 150mm square at bottom 2.15m height above ground level and 0.60m below ground level, in RCC 1:2:4 mix using12to 20mm gauge stone jelly with necessary reinforcement moulding work and rendering smooth with cement at 15kg/cu.m. etc., complete and fixed in CC foundation in 1:4:8 using 40mm size stone jelly The foundation is of size 45x45x90cm with sand filling 15cm height. The fencing will be of chain link 75mm size, 10 gauge. The height of fence is 2.0m after leaving 75mm gap from ground level including fixing the fence with the posts using G.l.binding wire, etc.,complete as directed

Supplying and fixing precast RCC wall panel compound wall over the existing stone masonry compound wall, including dismantling the existing wall up to the bottom level of the steel grill, and providing precast RCC columns above the existing masonry. The panels and columns shall be installed as per approved structural design, alignment, and level, complete with all accessories, labour, and tools required for a secure and durable installation.,complete as directed

Pre-Painted Galvanized Iron Fixed Louvered Ventilators with Glass and Grill: Providing and fixing louvered ventilator fabricated from roll formed sections made of galvanized steel colour coated / powder coated (Base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams / sqm.) with total coated thickness of 0.58mm. Paint specification: Coated sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns. Dimensions of sections: The section for external frame should be of 57mm x 33mm. Fixing details: The section should be cut to length, joined with profile to profile component. Accessories: Glass holding flanges made of glass filled nylon. Glass: Louvers should be provided with 4mm pinhead glass. Grill: Ventilator should be provided with grill made of 10mm Square MS bars to 12mm x 5mm flat at 4" intervals. Total grill unit should be powder coated and fixed to ventilator frame with screws. The above frames should be fixed to brick / concrete masonry walls and floor by means of self-expanding screws.,complete as directed

Providing and fixing 10 mm thick solid Polycarbonate sheet using nessesary MS support structure (Considered separatly under structural Steel) from the ground. as per given technical specifications.The sheet will be mounted on hot dip galvanized steel frame work with the help of specially designed aluminum pressure pad profile and zinc coated pinhead self-drilling screw with rubber gasket for proper griping & to prevent noise leakage.,complete as directed

Providing and Placing of Container Block for Male / Female Toilets & Male / Female Dressing Room a. supply and install the pre-fabricated container based bio-toilet blocks. The scope includes design, engineering, fabrication, installation, testing, commissioning and running the toilet operation. The toilet blocks must be housed inside a bamboo enclosure .,complete as directed b. supply and install the pre-fabricated container based changing room fitted with shower panels outside. The scope includes design, fabrication, commissioning and running the toilet operation. The changing room & shower panel block must be housed inside a bamboo enclosure.,complete as directed.

Providing and Placing of Container Block for Admin / CCTV Room, First Aid Room The work involves the creation of an integrated room made from a standard ISO container measuring 6.18m x 2.37m in size. This room will house first aid equipment and CCTV control facilities at the beach location. It requires the installation of a temporary structure made of prefab materials or a container equipped with all necessary equipment for first aid and CCTV control services. The structure must be labeled with their respective names, including "RED CROSS" in front of the first aid area for emergency identification. The scope of work includes design, engineering, fabrication, installation, testing, commissioning, and operationalizing of the integrated tourist facilities as per the design drawings provided.,complete as directed.

Bamboo Thatched Roof Providing and fixing SHINGLE roofing with top layer of Bamboo shingle, made of flatterned CCB pressure treated bamboo in size of 450 mmx 150mm and 3 to 5 mm thick, perpendiculer to rafter/ beam at spacing of 150 mm c/c which is included, including laying of 1.5/2mm bituminous thickened minimum overlapped of 150mm c/c on 8mm thick flattened bamboo board, and design including all bamboo accessories like CCB treated shingles, Bamboo, flattened bamboo board, ss stud and nut , nails , screws, including scafloding and cost of labour material with all lead & lifts and machinery & equipment charges, etc complete as directed

Bamboo trellies work with opening 50x50mm with thick bamboosplits 25mm wide tied on strong bamboo frames 50mm dia.alround including wire nails and fixing in position,etc.,complete as directed

PVC Water Tank Supply and fixing of PVC Square Water Tank (Sintex /Plasto/ Supreme/ Neelkamal or Equivalent ) made of high-density high quality polypropylene having capacity of 500 litres per tank. Tank height to be less than 2.5ft. from the roof and properly fitted on container roof

Supplying, filling, and spreading a mixture of Red Earth, Farm Manure, and Sand of 900mm depth at a ratio of 1:1:1. This mixture is to be prepared by mixing and spreading evenly in the arrival plaza area., complete as directed

Supplying and filling in foundation, basement, etc with filling sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Refilling with excavated earth other than sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Refurbishment of existing Parapet wall around Tank, Painting of wall, polishing the existing Granite., complete as directed

Refurbishment of existing Compound wall including repairing of existing damaged, Painting for existing compound wall & Steel grils., complete as directed

Cleaning of water storage tank (inside surface area) with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank and disposing of malba all complete as per direction of Engineerin-Charge. If during cleaning any Gl fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account. complete as directed

Providing and fixing of Partition wall using HPL Board and SS Pipe crafted with premium materials like 304 grade Stainless Steel hardware, renowned for its superior strength and corrosion resistance, cubicles maintain premium look and functionality, even in high-moisture environments.,complete as directed

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers.

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification.

Supplying, fixing, testing and commissioning approved make 15mm CP CP Two Way Bib Cock with Health Faucet with one no, CP flexible tube 1.0m long, CP crutch, nozzle etc., complete as directed

Supply and installation of Angle Cock of approved brand and quality, including necessary fittings such as wall flange and PTFE tape, fixed to the wall water outlet with proper alignment and leakproof finish etc., complete as directed

Supplying and fixing in position 15mm dia brass CP screw down tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.

Providing and fixing of mirror made from superior quality float/clear glass of approved make and thickness, with polished edges or framed as per design, fixed to wall with necessary CP/brass screws and accessories, complete as directed.

Providing and fixing of towel rail made of chrome-plated brass/stainless steel, including necessary brackets, screws, plugs, washers, and installation at designated locations, complete in all respects.complete as directed.

Manufacturing & Supplying lowring & jointing of HDPE pipe PN6 for water supply.,complete as directed

Supplying, laying and jointing 25mm dia CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works.

Supplying CPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements.Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing PVC specials needs to be allowed

25mm dia ELBOW

25mm dia TEE

25mm Dia COUPLER

Supplying, laying and jointing UPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using PVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works.

50 mm dia

75 mm dia

110 mm dia

Supplying UPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements.Since the labour for cutting, threading / pasting, sundries have already been included under pipe line item of works, no separate provision for fixing PVC specials needs to be allowed

50 mm Dia Elbow

75 mm Dia Elbow

110 mm Elbow

50 mm Dia TEE

75 mm Dia TEE

110 mm Dia TEE

50 mm Dia COUPLER

75 mm Dia COUPLER

110 mm Dia COUPLER

Supplying and fixing in position best approved of BIS quality 110mm dia PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

Bill Board (Advertisement Boards)

Supplying and erecting in position of 250 liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.etc complete as directed.

Construction of Platform of size 3m X 3m around tree using Aerocon Block of size 600mmx200mmx150mm with CM 1:5 of 600mm thick & 600m height above ground, dadooing with granite tiles, gravel filling around the trees which supporting watering.complete as directed

Supply and Instllation of Information Boards / Signages Boards

Design, supply, and installation of Site Identification Signage Board consisting of granite block/cladding base and Stainless Steel (SS) panel with engraved / laser-cut lettering, including foundation, structure, fixing, and polishing complete as per approved architectural design and drawings. Site & Building identification signage, Facility signage, Promotional Signage (Type A to D & I)

Design, supply, and installation of Signage Board consisting of 100 mm square Cast Iron / Aluminium posts with Stainless Steel (SS) panel, including foundation, structural support, lettering/logo, surface finishing, and fixing, complete as per approved architectural design and drawings. Trail Blazer Signage (Type E)

Design, supply, and installation of Hanging Signage Board consisting of 450 mm × 450 mm Stainless Steel (SS) panel, with suspension arrangement, lettering/logo, finishing, and complete fixing as per approved architectural design and drawings. Facilities Signage (Type F)

Design, supply, and installation of Signage Board consisting of granite block/cladding base and Stainless Steel (SS) panel with engraved / laser-cut lettering, including foundation, structure, fixing, and polishing complete as per approved architectural design and drawings. Commemorative/Informative Signage (Type G)

Design, supply, fabrication, and installation of Advertisement Board (10 m × 5 m) consisting of structural steel columns and frame with granite cladding, ACP/digital print panels, lettering panel, and integrated lighting system, including RCC foundation, surface finishing, and complete installation as per approved architectural design and drawings. Bill Board (Advertisement Board)

Supplying and installing the Pallavan lion sculpture on the prepared platform, crafted from white granite, with heights ranging from 1.20m to 1.50m, in accordance with the approved design and drawings.,complete as directed

CCTV System Supplying, installation, testing and commissioning of IP based CCTV system for security comprising of PTZ / fixed camera, cabling, recording, display system and hard ware & software support Supplying, installation, testing and commissioning of a network of cameras and related components strategically positioned to provide comprehensive surveillance coverage of the tourist area with the following configurations a. Hot Dip Galvanized Octagonal pole. The pole should be made as per IS and shall be coated with Hot Dip Galvanizing as per IS: 4759, IS:2629, IS: 2633 of height 6-8 meters, Cantilever arm length of minimum 1.5 meter b. High quality imaging camera with 8 MP resolution c. Public Announcement System with necessary Pole arrangements as per the design requirement d. 32 Channel NVR with 45 Days storage recording capacity e. UPS with 1 Hr Backup (Based on the load Requirement) f. 5 nos of 32 Inch LED Screen & 100 Mbps ILL for video feeds g. All wiring must be hidden, through tubes/pipes. No wires shall be visible from outside. h. Separate Earthing as per IS standard provided for each mounting structure and lighting arrester

Supplying, transporting, installing, and commissioning of a fully automatic Organic Waste Converter (OWC) machine with required capacity (as specified), installed on a pre-constructed platform. The item includes delivery to site, unloading, positioning, power connection provision, system integration, trial run, and training of staff/operators. Complete in all respects as per manufacturer's specifications and directions of the Engineer-in-Charge.

Scarifying existing bituminous surface to a depth of 30 mm by mechanical means (using Hydraulic excavator) (Scarifying the existing bituminous road surface to a depth of 30 mm and disposal of scarified material with in all lifts and lead upto 1000 metres.)

Excavation in Soil using Hydraulic Excavator and Tippers with disposal upto 1000 metres. (Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m)

Construction of Subgrade and Earthen Shoulders (Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of MoRTH table No. 300-2)

Providing and Laying Granular sub base (GSB) by provided coarse graded material confirming to ( table 400-1) mixing in a mechanical mix plant at OMC carriage of mixed material to work site spreading in uniform layers with motor grader on prepared surface and compacted with vibratory power roller to achieve the desired dry density to the required grade and cross slope as per drawings all others incidental charges etc.complete as per clause of 401 Morth Specification

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Providing and laying Prime Coat 7Kg/10 M2 With Bitumen Emulsion (Slow Setting) Including Cost of Bitumen emulsion At The Site Including Labour Charges For Preparing The Surface And Applying Required Quantity of Bitumen Emulsion As Prime Coat Using Bitumen Sprayer Etc. Complete Over Wet Mix Macadam As Per Clause 502 of MoRTH Specifications.

Providing and laying Tack Coat 2.5 kg/10 m2 with Bitumen Emulsion (Rapid Setting l) including cost of bitumen emulsion at the site, including labour charges for preparing the surface and applying required quantity of bitumen emulsion as Tack Coat using bitumen sprayer etc., complete over the primed surface as per clause 503 of MoRT& H Specifications Rev.5

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24 cum of 26.50-13.20mm, 0..25cum of 13.20-2.36mm and 0.23cum of 2.36mm & below and with 53.20 Kgs of VG30 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to work site, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, 9m paver finisher, Vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5 [The Rate Is Applicable Only If It Is Laid By 9M Paver Finisher]

Providing and laying Bituminous Concrete to 40 mm thick using 0.13 cum of 19.00-9.50mm,0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental complete complying with standard specification and as directed charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Interlocking paver blocks:- Providing and laying 63mm thick Interlocking paverblocks of M -30 grade of approved size, design & shape, laid in required colour and pattern over a base layer of 50mm thick of 6mm size graded chips filling the joints with line sand etc. complete complying with standard specification and as directed

Interlocking paver blocks:- Providing and laying 83mm thick Interlocking paverblocks of M -40 grade of approved size, design & shape, laid in required colour and pattern over a base layer of 50mm thick of 6mm size graded chips filling the joints with line sand etc. complete complying with standard specification and as directed

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

Providing And Laying of Hot Applied Thermoplastic Compound 2.5 mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness of 2.5 mm Is Exclusive of Surface Applied Glass Beads As Per Irc:35 The Finished Surface To Be Level Uniform And Free From Streaks And Holes Etc Completed

Providing And Fixing of Retro Refelctorised Cautionary, Mandatory And Informatory Signs (Without Definition Board) Made Out of High Intensity Prismatic Grade Sheeting To Type – Iv Standards of Irc 67 . 2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm ThickAluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported on a Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level to The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67- 2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45mmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. High Intensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67X2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance And a Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67-2012

90 cm Equilateral Triangle

90 cm High Octagon

Providing And Fixing of Retro Refelctorised Cautionary, 80 cm X 60 cm Rectangular Mandatory And Informatory Signs (With Definition Board) Made Out of High Intensity Prismatic Grade Sheeting Conforming To Type – Iv Standards of Irc 67 :2012 And Astm D 4956 – 09, Specification And Fixed Over 2mm Thick Aluminium Sheet Fixed Over A Back Supporting Frame of 25mm X 25mmx3mm. Mild Steel Angel And Supported On A Mild Steel Angel Post 75X75X6mm With A Clear Height of Not Less Than 2.10M From The Ground Level To The Bottom of The Sign Board And 0.60M Below Ground Level. The Sign Post Should Be Painted As Per Irc 67- 2012 And Firmly Fixed To The Ground By Means of Properly Designed Foundation With M15 Grade Cement Concrete 45mmx45cmx60cm Size Including Cost And Conveyance of All Materials, Equipment, Machinery And Labour With All Leads And Lifts, Loading Charges Necessary For Satisfactory Completion of The Work As Directed By The Engineer In Charge. HighIntensity Retro – Reflection Sheet Shall Consist of Minimum Coefficient of Retro-Reflection As Per Table 6.6 of Irc 67-2012. The Retro Reflection Sheeting Shall Be Covered Under 7 Years Warranty Issued For Field Performance An d a Certified Copy of Three Years Outdoor Exposure Report Shall Be Obtained As Per Irc 67:2012 , complete as directed

Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications , complete as directed

Surface Drains in Soil (Construction of unlined surface drains of average cross sectional area 0.40 sqm in soil to specified lines, grades, levels and dimensions to the requirement of clause 301 and 309. , complete as directed

Turfing in slopes including watering and fixing with initial lead upto 50m., complete as directed

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 6 points / Coil)

Supply and Run of 2 of 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion

Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box ( GI ) in flush with wall with connections. Higher end

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher end

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour.

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire with painting of suitable colour

Suppl and laying of 3-1/2 x70 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth to make good

Suppl and laying of 3-1/2 x50 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth tomake good

Suppl and laying of 3-1/2 x25 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth to make good

Suppl and laying of 4 x16 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth tomake good

Supply and Run of 3 Core 1.5 sq.mm. PVC Power cable for insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with con and making good of the concealed portion

Suppl and laying of 4 x10 sq.mm PVC armoured LTUG cable in a trench to be excavate data depth of 0.75 metre putting 0.1 5 metr e layer of sandandcovering the cable completely with bricks and sand and refilling the earth tomake good

Supply and Run of 3 core of 2.5 sq.mm Flat cable

Supply and providing cable end termination of 31/2x70sq.mm .PVC LTUG aluminium armoured cable with necessaryaluminiumn cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2x50sq.mm .PVC LTUG aluminium armoured cable with necessaryaluminiumn cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 3-1/2x25sq.mm .PVC LTUG aluminium armoured cable with necessaryaluminiumn cable sockets by crimping etc with electrical connection complete

Supply and providing cable end termination of 4x16sq.mm .PVC LTUG aluminium armoured cable with necessaryaluminiumn cable sockets by crimping etc with electrical connection complete

supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing of 12W LED 3000K round Type Recessed Fitting with LED , with Epoxy powder coated die cast aluminium housing in grey finish, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 5700K, minimum CRI>80, .etc., complete.

Supply and fixing of 20W Recess mounted LED wall washers, tilted 70° outwards and swivels 350°, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 5700K, minimum CRI>80, .etc., complete.

Supply and fixing of 15W Track mounted LED light for single phase track., complete.

supply and fixing of 18W LED Round type Recessed fitting with LED (Lower end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting

Supply and fixing o 20 Watts 4 feet LED tube light (Philips,Crompton, Havells or Equilvqnt Make) Including giving electrical connection etc complete

Supply and fixing of 9W LED Wall lamp Fitting with LED , with Epoxy powder coated die cast aluminium housing in grey finish, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and frosted cover CCT: 5700K, minimum CRI>80, .etc., complete.

Supply and fixing of 40W LED Stellar LED post-top IP-66 and IK 10 rating ensures it stands tall amid varid environemtnal conditions, input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and cover CCT: 3000K.etc.complete.

Supply and fixing of 60W LED Made up of Pressure Die Cast aluminium body and opal PC cover. IP 66 and IK 07 rating ensures it stands tall amid varied , input voltage AC 220 - 260 Volts with PF>0.9, Surge protection: 2KV,THD<10%, with inbuilt driver and cover CCT: 3000K.etc., complete.

Supply and fixing of 15W LED IP 66 LED UP-down Luminaire with wall surface mounting using COB LED , input voltage AC 220 - 260 Volts with PF>0.9,, with inbuilt driver .etc., complete.

Supply and fixing of 7W LED decorative rectangular shaped IP66 LED step light for wall recessed , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of 8W LED aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of 72W LED Aesthetically designed IP 66 LED post Top with aluminium enclosure, powered with high power LEDs as light source and die casted heat sink exhibiting classic Victorian look with symmetrical light distribution, suspended mounting arrangement , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete

Supply and fixing of 18m Flexible LED strips with optimum brightness & uniformity of light for perfect cove lighting. IP65 , input voltage AC 220 - 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of Decorative IP66 LED spike light using COB LED, input voltage AC 220 260 Volts with inbuilt driver.etc., complete.

Supply and fixing of chandilier including internal connections and labour charges etc complete.

Supply and fixing of 4 M TOP 76MM decorative hot dipped galvanised mild steel step pole with grey powder finish. Compatible for all post top range. Window - Plasma cut & duly chamfered opening window of 300x110 mm for terminal connections & mounting accessories. Window cover is fitted with allen screws to the pole..etc., complete .

Supply and fixing of 8 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 24 nos. 6A to 32A SP MCB asoutgoing on wall with earth connection only.

Supply and fixing of 4 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A 4P MCB switch as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only.

Supply and fixing of 4 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. End

Supply and fixing of 25A Flush type Wall Socke t25A DP MCB complete set for AC Plug inflush with wall with earth connection (For AC Plug)

Supply and fixing of 2.0 Ton split Air conditioner having 5 Starrating (both indoor and outdoor Unit)with 3mtr copper pipe and contro lwire including remote unit. The rate inclusive of materi llabour and transporation etc

Supply and fixing of 300mm (12" )sweep (lightduty )AC exhaust fan complete with necessary wall opening and making good of the wall

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp

Earth work excavation of Trench of size 0.3x0.9 x1.0M in all types of soils covering of laid cables/HDPE pipe, back filling of Trench duly providing cable route indicators embedded for every 8 Mtrs in C.C including cost and conveyance of all materials labour charges etc., complete.

For laying below GL including earth work

For laying in trenches inside or in air

Supply and laying of following sizes Earth wire/ Strip in horizontal / Vertical run in Ground/ surface/ Recess including, revitting, soldering, saddles and making connection etc as required

Supply and laying of 50 mm x 6mm GI Flat(2.5 Kgs/mtr)

Supply and laying of 25 x 6mm G.I strip

Supply and laying of 8 SWG GI wire(0.104Kgs/1Mtr)

Providing independent earthing by excavating a pit to a depth of 2.1 m with 0.3 m dia in soil using 40 mm dia 'B' class GI pipe of 2.5 m length having staggered holes, filling up the surrounding space around the pipe with Bentonite powder up to 1.8 m from the bottom and remaining space of the pit with loose earth and fixing hume pipe ring (3 mm Thick) with necessary accessories and proper connections including cost, conveyance of all materials, and labour charges etc., complete.

Supply and fixing of 2.5mm thickness upto 11KV PVC synthetic elastomer electrically insulated mat conforming to IS:15652-2006.

Supply and laying of 11KV/22KV hand gloves

Supply of standard 18"x12"x8" first aid box with all standard contents

Supply and Erection of Highmast (12 Metre) with 6 Nos. 150W LED Fitting directed by the field engineers during execution with all accessories and labour charges complete.

Supply and fixing of suitable out door type street light and landscape lighting feeder pillar box [Makes : Legrand / Schnieder / L&T] made with 14 SWG CRCA sheet after 7 tank process including S & F 40-63A FP MCB, 6 Nos SP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work.

Supply and fixing of suitable out door type LT feeder pillar box [Makes : Legrand / Schnieder / L&T] made with 14 SWG CRCA sheet after 7 tank process including S & F 63A TP MCCB, 6 Nos TP MCB's, din chanel, bus bars, 6 Sqmm 3 core copper cable for internal wiring, contactor, connectors and provision for energy meter etc., complete for finished item of work.

Supply and Transportation of following dia double walled corrugated HDPE [HDPE Pipe Make: Duraline (Duraguard)/ Percision or equivalent] duct made as per specification( BSEN - 500 86/IS 14930 Part-II)

Cost of 50mm outer dia HDPE pipe

Cost of 90mm outer dia HDPE pipe

HDPE Pipe 120mm / 103.50mm

Supply Installation Testing And commissioning of 30 KVA DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.

Supply and fixing of 7 segment 6 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 18 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only

Supply ,installation testing commissionning and handing over of Air cooled self contained ductable AC units

Supply, Fabrication and erection of fabricated ducting made up of GI Sheets complete for finished item of work.

GI Sheets of 24 Gauge tk

GI Sheets of 22 Gauge tk

GI Sheets of 20 Gauge tk

Supply, fabrication and fixing of MS Channel for Mounting the Airconditioning Indoor Unit complete for finished item of work.

Supporting structure Airconditioning Indoor Unit

Supporting structure Airconditioning Outdoor Unit

Supply and fixing of extruded aluminum powder coated, Supply and return Air Grilles / Diffusers with Volume Control Damper complete for finished item of work.

Supply and providing acoustic for initial portion of ducting with 12mm thick Fibre Glass Rigid Board covered with Tissue Paper and Aluminum Perforated Sheet complete for finished item of work.

Service connection from TNEB with out pole

Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in T.S, excluding etc complete for finished item of work as directed by Engineer- in-charge .

25 mm dia. HDPE pipes

32 mm dia. HDPE pipes

40 mm dia. HDPE pipes

50 mm dia. HDPE pipes

63 mm dia. HDPE pipes

75 mm dia. HDPE pipes

Lowering HDPE pipes and specials to trench and laying to proper grade and alignment and as directed

50mm to 75mm dia (OD) HDPE pipe upto 2mt depth

50mm to 75mm dia (OD) HDPE pipe 2 to 4m

50mm to 75mm dia (OD) HDPE pipe 4 to 6m

Jointing HDPE Pipes and Specials by butt fusion welding / electro fusion welding joints using fusion equipment as per ISO 21307-2011 and as per IS 7634 (part-2) : 2012 including cost of hire charges for butt fusion equipment power supply arrangements etc., complete as per directed

25 mm dia. HDPE pipes

32 mm dia. HDPE pipes

40 mm dia. HDPE pipes

50 mm dia. HDPE pipes

63 mm dia. HDPE pipes

75 mm dia. HDPE pipes

Construction of RCC Chamber as per drawings for valves including earth work excavation, PCC of M10, M25 garde concrete for bottom slab and side walls with FE500 (TMT) reinforcement, precast frame and cover made of HD20 Grade and including all cost and conveyance of all materials, laying, vibrating, curing, shuttering, centering, supply, fixing and placing of steel and frbrication etc., and labour charges etc complete finish item of work as directed by the engineer.

Sluice Valve Chamber (0.8 x 0.8 x 1 m)

Air valve chamber ( 0.5x0.5x0.8)

Air valve chamber ( 0.8x0.8x0.8)

Supply and delivery of protection box of size 20cm x 30cm for fixing of Water Meter. The box should be rectangular base in construction and material of construction should be weather resistant polyethylene (PE) blue /black .Reinforcement rips should be provided at the walls of the box. Box should be at two components comprising body and lid. Lid should be press fitted to the body. No hinges should be used for opened /closed. Operation meter box should be provided with built in lock. The body as inlet and outlet windows to pass the pipe through suitable for use with pipes of sizes up to 1" .Base of the box should be designed in such a way .That the box can be installed to the floor/wall using anchor Bolts / screws without grouting the entire base of the meter Box .Provision for fixing Name plate showing the name of the Department etc., complete and as directed by the TWAD Board Officers.

Manufacture, Supply, & Delivery of HDPE fittings conforming to IS 4984 - 1995 including transportation to anywhere in T.G. Excluding taxes.

25 mm dia. End Caps HDPE pipes

32 mm dia. End Caps HDPE pipes

40 mm dia. End Caps HDPE pipes

50 mm dia. End Caps HDPE pipes

63 mm dia.End Caps HDPE pipes

75 mm dia.End Caps HDPE pipes

Reducer OD 40 mm x 32 mm

Reducer OD 50 mm x 63 mm

Reducer OD 40 mm x 50 mm

Reducer OD 63 mm x 75 mm

Reducer OD 75 mm x 90 mm

32 mm dia. Tee HDPE pipes

40 mm dia. Tee HDPE pipes

50 mm dia Tee. HDPE pipes

63 mm dia. Tee HDPE pipes

75 mm dia. Tee HDPE pipes

63 mm dia. BendHDPE pipes

75 mm dia. BendHDPE pipes

Supply and delivery of DI D/F Gate sluice valves (soft seated) resilient seated soft sealing Gate Valves(Sluice Valves) with body Bonnet of Ductile cast iron of Grade GGG 40 or equivalent grade, Wedge fully rubber lined with EPDM replaceable spindle nut without gland packing and with 3 O- Ring protection on the shaft and seals of NBR and the valves should be of Vacuum tight and 100% leak proof with face to face dimensions as per BS 5163- 89/ISI 14846-2000/DIN 3202 F4. All the valves should be with electrostatic powder coating both inside and out side with pocket less straight through body passage. All the valves are to be compatible for buried application with pressure rating PN 10/16., complete as directed

Supply and fixingC.I. DOUBLE AIR VALVE AS PER ISI 14845/2000., complete as directed

Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in T.G., F.O.R. destination including, loading, un-loading & stacking at site but excluding all taxes, as applicable as directed by Engineer-In-Charge.( 24X24 HD 20- 600x600 mm )., complete as directed

Supplying fixing and commisioning of 1 HP monoblock pumpset alongwith single phase panel board with two level guard and auto start. The rate include the cost of pumpset , pumpset fixing in position and test run etc.complete as directed

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. a)65mm dia

Electromagnetic Flow Meter shall be a velocity sensing Electromagnetic type, microprocessor based signal converter, sealed housing, flanged tube meter for 1.0 Mpa working pressure, manufactured to highest standard available for mag-meters, equipped with minimum six digit digital totalizers, reading in different units (Kiloliters / Cubic meter) and shall be accurate within 0.5% of Measured value, shall operate within a range of 0.3 m/sec to 4 m/sec and be constructed as follows: Meter tube (Sensor) shall be fabricated from stainless steel tube and use class PN10 flat face carbon steel flanges in accordance with IS 1538. These flanges shall be welded to the flow tube. The internal and external of the meter tube shall be blasted to near white and lined with hard rubber/ Polyurethrene/ PTFE preferably by SBR or EPDM. Meter tube shall have a constant nominal inside diameter offering no obstruction to the flow. The accuracy should be inclusive of linearity, hysteresis, repeatability, temperature and pressure effects. Coil Housing shall be fabricated from stainless steel (SS304)/ Die cast Aluminium/ Carbon steel with anticorriosive paint for corrosion resistance and welded to the tube providing a completely sealed environment for all coils, electrode connections and wiring harness capable of submerged or buried operation with IP68 Protection. Signal Converter shall be pulsed DC coil excitation type with auto zeroing. The signal converter shall be remotely mounted away from the meter. The converter shall indicate direction of flow and provide a flow rate indication and a total of flow volume for both forward and reverse directions. The converter shall provide an isolated 4-20 mA output into minimum 500-ohm load and a frequency output of a maximum of 0-10 KHZ and a scaled pulse output. The microprocessor based signal converter shall have a self-diagnostic test mode and a backlit display that continuously displays “Rate of Flow” and “Total Volume”. Converter shall be supplied with a programmable low flow drop out, higher flow and empty pipe zero return. The signal converter housing should be die-cast aluminum with glass window. The converter cum transmitter should be fully programmable from the front facia. The programming should be user friendly, self-prompting menu driven. Flow meter test calibration certificate from FCRI, flow test lab / NABL accredited lab to be furnished. a)50 mm

Supplying and installation of Zincalum metallic water storage tank of 45KL inclusive of Flanges/Nozzles, level Indicators, Manhole (on the top) hand Ladder (Outside GI Ladder and Inside Rope Ladder). unloading, lifting

Providing and constructing of precast RCC circular manhole of grade M-30, according to drawing, fixing (slant portion of 0.64 m and raft 0.3 m) with cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter, total weight of cover and frame to be not less than 182 kg, Plastering with SRC cement motor 1:3 including centering shuttering all complete as per standard design and as directed by Engineer in charge.

900mm Dia

1200mm Dia

1500mm Dia

Manufacture as per company’s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in T.G. including cost of materials packing as per company’s standards, loading, transportation, unloading and stacking at site of work etc, complete but excluding taxes and others etc., as applicable.

Manufacture, supply, & delivery of (DWC) structured wall polyethylene/polypropylene piping system class SN-8 with non smooth external annular corrugated and smooth internal surface (Double Wall) for non pressure sewage & Drainage application pipes of standard length 6 m, grade conforming to IS 16098 (part-II: 2013) including rubber gasket, transportation to anywhere in Telangana, loading, unloading charges but excluding all taxes etc complete.

Lowering , laying of Class SN 8 Double wall corrogated ( DWC) pipping systemin into ready made trenches , laying true to line and level and perfect linking at joints, encasing the pipe alround with with soft gravel, testing and commissioning, and giving necessary hydraulic test to the required pressure as per ISS etc complete for finished item of work.

Construction of pumping station including RCC underground sump with waterproofing, pump house superstructure, foundation, flooring, supply, installation, testing & commissioning of pumping system with 2 nos. centrifugal pumps (1W+1S), each 0.5 kW, suction/discharge piping with valves, strainers, bends, manifolds, pressure gauges, MS base frame with AV pads, electrical control panel with auto alternation, cabling, earthing, lighting, and all associated civil, mechanical & electrical works complete as directed.

GST at 18%

SRI ANNAMAAR AND CO (BID ID -1467871)