Loading
Loading…
Loading…
Tender Value
₹2.4 Cr
EMD Value
₹4.7 L
Closing Date
28 May 2026, 1:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
Above/Below/Par
NIT
15 conditions · 4 needing a document upload
As per PREAMBLE CLAUSE No. 11.2 of Tender Document:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V=Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
ELECTRICAL CONTRACTORS LICENSE:- The contractor shall fulfill valid Electrical Contractor License requirement as per IE Rule 1956 clause no- 45. Electrical Contractors license shall be submitted along with the offer, failing which the offer will summarily be rejected.
Technical Eligibility Criteria: As per clause 11.1 of Preamble and Scope of Work of uploaded tender document Page no. 4 & 6.
SIMILAR NATURE OF WORK: The contractor should have executed, "Electrification /Rewiring of Service or Residential building/Yard / HT/LT Substation work / HT/LT cable work / Street lighting / Platform or building lighting management / circulating area Lighting / Electrical overhead power supply work / Electrical pump work etc."
23 conditions · 9 needing a document upload
All the supporting DOCUMENT(S)/CERTIFICATE(S) of as a proof Technical and Financial credentials as detailed in this tender Document, has/have been attached.
Supporting DOCUMENTS/CERTIFICATES as detailed in this Tender Document has been attached.
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA and shall be valid for a period of 90 days beyond the bid validity period. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bids. (i.e. excluding the last date of submission of bids.) (See clause 1.10 of Chapter-I of Tender Document)
All the bidders / tenders should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law. (Copy of GST registration certificate)
Copy of PAN CARD
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Rewiring works for repair and renovation of officer's cabins and staff seating areas in Old & New Annex buildings, TMS buildings and other miscellaneous works at CSMT.
BB-LG-W-CSMT-2026-01-R
BB-LG-W-CSMT-2026-01-R
Open
Works - General
18 Months
Mumbai, Maharashtra
₹0
₹4.7 L
28 May 2026
5 May 2026
14 May 2026
316 items across 6 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 12,04,845.24 | ||
| — | Breakup for | details. | — | ||
| (1) Supply, erection, testing and commissioning of 36 W Recess mounted LED 1'x4' fitting complete with connections as per site requirement. | — | — | — | 1,37,016 | |
| — | Breakup for | details. | — | ||
| (2) Supply, erection, testing and commissioning of 2 x 2 36 W LED fitting with IP 20 complete with connection and necessary fixing arrangements as per site requirement. | — | — | — | 1,08,176.1 | |
| — | Breakup for | details. | — | ||
| (3) Supply and fixing of 18-20 wattsLED round recessed/surface mounted downlighter with a pressure die-cast aluminum heat sink luminaire of, with a supply connection using a 3-core x 1.5 sq mm PVC-insulated copper cable fittings complete with fixing. | — | — | — | 64,302.9 | |
| — | Breakup for | details. | — | ||
| (4) Supply, fixing, testing & commissioning of LED 15-20W, spot light fitting, Effective heat dissipation with extruded aluminum heat sink, inbuilt protection, protected from dust and insects, complete with cover/ other accessories etc. with aluminum housing powder coated with white reflector, and necessary fixing arrangements as per site requirement. | — | — | — | 37,537.4 | |
| — | Breakup for | details. | — | ||
| (5) Supply, erection, testing and commissioning of LED mirror light for washing basin, complete with accessories. | — | — | — | 15,438 | |
| — | Breakup for | details. | — | ||
| (6) Supply, erection, testing and commissioning of LED strip 5 meters light complete with all fixing arrangements. | — | — | — | 30,127.4 | |
| — | Breakup for | details. | — | ||
| (7) Supply, erection, testing and commissioning of Aluminium LED profile complete with all fixing arrangements. | — | — | — | 20,240 | |
| — | Breakup for | details. | — | ||
| (8) Supply, fixing, testing & commissioning of ceiling / wall bracket / wall mounting decorative light fitting, Effective heat dissipation with extruded aluminum heat sink, Robust driver with wide voltage range and inbuilt protection,complete with accessories etc as per site requirement. | — | — | — | 1,90,272 | |
| — | Breakup for | details. | — | ||
| (9) Supply, erection, testing and commissioning of 48" sweep energy efficient BLDC ceiling fan with down rod, motor, etc. with necessary connection. | — | — | — | 1,11,558.2 | |
| — | Breakup for | details. | — | ||
| (10) Supply, erection, testing and commissioning of 18" Heavy Duty Pedestal fan complete with necessary fixing arrangement. | — | — | — | 54,500 | |
| — | Breakup for | details. | — | ||
| (11) Wiring of the concealed Light / fan / call bell point with all accessories. The switches shall be of modular type. | — | — | — | 2,66,365.8 | |
| — | Breakup for | details. | — | ||
| (12) Wiring of Universal plug point on switch board with all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type. | — | — | — | 2,029.8 | |
| — | Breakup for | details. | — | ||
| (13) Wiring of the concealed Universal plug point on separate switch board with all accessories. The switches shall be of modular type. | — | — | — | 3,839.4 | |
| — | Breakup for | details. | — | ||
| (14) Wiring of the concealed Universal plug point (2 plug & 2 switch on separate board) with all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type. | — | — | — | 7,911.3 | |
| — | Breakup for | details. | — | ||
| (15) Wiring of concealed 15 Amps wall socket point complete on separate switch board with all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type. | — | — | — | 5,372.22 | |
| — | Breakup for | details. | — | ||
| (16) Wiring of concealed 15 Amps socket point complete on separate switch board with 20 Amp DP MCB & all accessories and running earthing copper conductor as per standard practice. The switches shall be of modular type. | — | — | — | 6,311.88 | |
| — | Breakup for | details. | — | ||
| (17) Wiring of the concealed Universal plug point (4 plug & 4 switch on separate board) with all accessories. The switches shall be of modular type. | — | — | — | 19,107 | |
| — | Breakup for | details. | — | ||
| (18) Supply, erection, testing and commissioning of indicator light fitting with red and green colour led based with modular type flame proof and provide in single glossy plastic box complete with connection. | — | — | — | 2,830.26 | |
| — | Breakup for | details. | — | ||
| (19) Supply, erection, testing and commissioning of battery operated Call bell, operated with remote 30m range. | — | — | — | 1,962 | |
| — | Breakup for | details. | — | ||
| (20) Supply, laying, running fixing of following sizes of XLPE insulated, PVC sheathed, 1.1 KV grade cables shall be as per IS. (a) 3 core 4 sq.mm CU conductor, armoured. | — | — | — | 48,800 | |
| — | Breakup for | details. | — | ||
| (21) Supply, erection, testing and commissioning of Lighting Circuit Board, Double Door Powder coated with locking arrangement consisting 32 A DP RCBO as I/C and 6 Nos x 6 ASP MCB and 2 Nos x 20A O/G SP MCB Complete. | — | — | — | 28,887.42 | |
| — | Breakup for | details. | — | ||
| (22) Supply, erection, testing and commissioning of 32 A,DP MCB with metal enclosure. | — | — | — | 1,253.46 | |
| — | Breakup for | details. | — | ||
| (23) Supply, erection, testing and commissioning of maintenance free earthing. | — | — | — | 24,441.7 | |
| — | Breakup for | details. | — | ||
| (24) Supply, erection, testing and commissioning of GI strip of 25 mm x 3 mm. | — | — | — | 16,565 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022upto11ACS.pdf
ATTACHMENT
CheckList_1.pdf
ATTACHMENT
SpecificationBLDCceilingfan.pdf
ATTACHMENT
RDSOSPN_197Ver_1.pdf
ATTACHMENT
TenderbookofRepairrenovation.pdf Tender Document
ATTACHMENT
TenderbookofRepairrenovation.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .