Construction of H. L. Bridge over river Brahmani 2nd km. of D/S of Rengali Dam in the District of Angul under Assistance RIDF -XIX. (Balance Work)

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works (5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Scarifying and removing existing Bituminous surface to the required depth and disposal of scarified material within all lifts and lead upto 1000metres, as per clause No. 305.4.3, 305.8, 305.9.6, 501.8.3.2, 501.8.7.2, 501.8.8.1 and Section 900 of specifications for Road and Bridge works of Ministry of Road Transport & Highways (5th Revision) & including cost of all materials, labour, T&P, taxes, royalty etc. complete in all respect and as per direction of the Engineer-in-charge.

Reworking and compacting the scarified surface with Stone screened Dust passing through 2.36 mm sieve and retained on 0.075 mm sieve to line and level as per Clause 501.8.3.2 of MoRT&H Specifications for Road & Bridge works (4th Revision) including cost, conveyance, taxes, cess,royalties of all materials, cost of all labour, T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

Excavation for road work in soil with hydraulic excavator including cutting, trimming bottom & side slopes and transporting to the embankment locations upto 1000m lead with cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 301 & 304 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Excavation for road way in hard rock (blasting prohibited) with rock breakers including breaking rocks, trimming bottom & side slopes as per requirements and transporting upto 1000m lead with cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 301 & 304 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Loosening, leveling and Compacting original ground to facilitate placement of first layer of embankment, scarified to a depth of 150mm, compacted at OMC to achieve minimum dry density conforming to Table 300-2 with cost of all labour, machinery etc complete as per Technical Specifications and Clause - 305.3.4 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Construction of embankment with approved materials deposited at site from roadway cutting and foundation excavation of CD & structures graded and compacted to meet requirement of table 300-2 including cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading and compacting to meet requirement of table 300-2 including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -305 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Sand filling in Road work & foundation of structure including cost, conveyance, royality of sand & cost of all labour etc complete as as per approved Drawing & Technical Specifications and Section - 2100 & Clause -304 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing GSB Gr-VI materials, spreading in uniform layers with motor grader, mixing by mix in place method at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 401 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing compacted granular materials in shoulder by using moorum having required P.I. value with sand admixture if required, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause - 401 & 408 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing, laying, spreading & compacting graded stone aggregate to wet mix macadam specification including premixing the material at OMC in mechanical mix plant, carriage of mixed material to site, laying in uniform layers on well prepared surface & compacting to achieve the desired density including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Clause -406 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing Primer Coat with bitumen emulsion on prepared granular surface, spreading @ 0.60kg / sqm using mechanical means including cost, conveyance of of bitumen emulsion & cost of all labour, machinery etc complete as & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 502 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing Tack coat with bitumen emulsion on prepared bituminous surface, spreading @ 0.20kg / sqm using mechanical means including cost, conveyance of bitumen emulsion & cost of all labour, machinery etc complete as per Technical Specifications and Clause -501 & 503 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing Bituminous Macadam of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501 and 504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & laying Semi Dence Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501, 503 and 508 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & laying Bituminous Concrete of grading -2 using crushed stone Gr.-2 materials & 60/70 penetration grade of bitumen, preparing preemixed materials with hot mix plant, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per clauses 501, 503 and 507 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in Table 500-29, prepared by using mastic cooker and laid to required level and slope after cooking the surface,including providing anti-skid surface with bitumen precoated fine grained hard stone chipping of 13.2 mm nominal size at the rate of 0.005 cum per 10 sqm and an approximate spacing of 10 cm center to center in both directio, pressed into surface when the temperature of surfaces is not less than 100° C ,protruding 1 mm to 4 mm over mastic surface including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per Clause 516 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm, thickness of 2.5mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes as per Technical Specifications and Section- 800, 1600 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M-35 grade Bored cast-In-situ pile of 1.000m dia excluding reinforcement complete including removal of excavated earth with all leads & lifts up to 1000mtr including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1100 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M-35 grade in Pile Cap for abutment and pier with formwork using 20 to 10mm size crushed stone aggregates mixed by Batching Plant, laying with all leads and lifts & compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1100/1200, 1500 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M-35 grade in Foundation raft of Bridge with formwork using 20 to 10mm size crushed stone aggregates mixed by Batching Plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

In abutment and pier shaft

In abutment and pier cap

In Wing wall / Retaining wall

In Dirt wall

In Road Kerb

RCC M-45 grade in Pedestal of Bridge with formwork using 20 to 10mm size crushed stone aggregates mixed by Batching Plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1200, 1500 & 1700 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Supplying, Fitting, Fixing & Placing in position of POT-cum-PTFE Bearing including cost, conveyance of bearing & labour for fitting fixing etc complete as per approved Drawing & Technical Specifications and Section - 2000 of MoRT&H Specifications for Road & Bridge works (5th Revision).

P.S.C. M-45 grade in girders including roads for lifting and launching of the girders with charges towards providing cranes, vehicle with trailer for lifting and to support the erection of girder for launching and placement at the required height and position including all chargers for arrangement for movement of cranes, trailers of required nos and capacity complete but excluding cost and labour for casting of girder, MS reinforcement & stressing grouting items as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision).

R.C.C. M-45 grade Deck slab / Cross girder / diaphragm including cost of all materials, cost of labour, machinery, T&P charges for suspended type staging / centering & shuttering suported on girders with MS bracket arrangement for cantilever portion as per approved Drawing & Technical Specifications and as per Section -1500, 1700 & 2300 of MoRT&H Specifications for Road & Bridge works (5th Revision)

RCC M-30 grade in wearing coat including steel of CD work with formwork using 20 to 10mm size crushed stone aggregates mixed by Batching Plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2702 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing and fixing 25mm thick bituminous expansion joint board in expansion joint of CD & structure work etc complete as per drawing and technical specification Clause No.2604 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Supplying, Fitting, Fixing and Placing in position Strip Seal Expansion Joints including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause-2606 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M-30 grade in Approach slab including steel of CD work with formwork using 20 to 10mm size crushed stone aggregates mixed by Batching Plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2704 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & fixing in position RCC Crash barrier monolithic with slab M-40 grade of 950mm height above slab including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2703 of MoRT&H Specifications for Road & Bridge works (5th Revision).

RCC M-30 grade in Railing of Culvert / Bridge for rails panel in 2 ties including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1600, 2300 & Clause- 2703 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing, Fitting & Fixing of Drainage Spouts in Deck slab including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause- 2705 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Dismantling PSC/RCC of grade M-20 & above by manual means including disposal of unserviceable materials & stacking serviceable materials upto 1000m lead with cost of all labour, machinery etc complete as per Clause -202 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Dismantling CC of M-10 & bellow by manual means including disposal of unserviceable materials & stacking serviceable materials upto 1000m lead with cost of all labour, machinery etc complete as per Clause -202 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Dismantling of Reinforced Concrete Pile head including cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Removing of Hume Pipes above 900mm dia and Stacking within a lead of 1000 metres including Earthwork and Dismantling of Masonry Works including T&P, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metres & including cost of all materials, labour, T&P, royalty etc complete in all respect and as per direction of the Engineer-in-charge.

PCC M-15 Grade of CD & structure work using 40 to 10mm size crushed stone aggregates mixed by Batching Plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

In Foundation bed as levelling course

In Foundation with formwork

PCC M-20 Grade of structure & CD work using 40 to 10mm size crushed stone aggregates mixed by Batching Plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

In Foundation

In Foundation bed with formwork

RCC M-25 grade in different items using 20 to 10mm size crushed stone aggregates mixed by Batching Plant, laying in layers and compacting including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete as per approved Drawing & Technical Specifications and Section 1500, 1700 & 2100 of MoRT&H Specifications for Road & Bridge works (5th Revision).

In Foundation of retaining wall/ RCC drain

In substructure of retaining wall

In Foundation raft of RCC Box culvert

In substructure of RCC Box culvert

In superstructure of RCC Box culvert

Turfing the slopes of embankment with compact turf grass including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 307 of MoRT&H Specifications for Road & Bridge works (5th Revision)

Providing Weep Holes of 100mm dia using A.C./ PVC pipe, fixing with cement mortar including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -2706 & 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & laying Filter Media with crushed stone aggregates of 45mm size satisfying requirements including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -710.1.4 of IRC 78 & Clause - 2504.2 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Back filling behind abutment wing walls & return wall using sand including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -710.1.4 of IRC 78 & Section 2200 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Metal spall backing to weep holes of abutments, deep drain with HB stone aggregates of 50mm size including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause -710.1.4 of IRC 78 & Clause - 2504.2 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Rough stone dry masonry with sand grouted using hard granite stones of size not less than 0.0025cum & coarse sand including cost, conveyance, royality of all materials with cost of all labour etc complete as per approved Drawing & Technical Specifications and Section -1400 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Construction of flexible apron comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 2507.2 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Rough stone dry packing on Aprons and Revetments with hard granite stone of above.003 cum including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 2504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Grouting aprons & revetments of 23cm deep with cement concrete (1:4:8) using 25mm size crushed stone aggregates including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 2504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Rough stone dry masonry in guard wall / retaining wall using hard granite stone of above 003 cum including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 2504.4 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Gravel backing to revetments including cost, conveyance, royality of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Clause - 2504 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Supplying, cutting, bending, binding, straightening, placing HYSD bars confirming to grade IS:1786-(Fe-500) for steel reinforcement works for finished item of work as per approved drawing and technical specifications complete in all respect as per section 900,1000, 1600, 2100, 2200 & 2300 of MoRT&H specifications for Road & Bridge works (5th Revision) including cost & conveyance of all materials, labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.

Painting on concrete surface with two coats of water bound cement paint to unplaster concrete surface of approved shade for finished item of work including cost of Paints & cost of all labour etc complete as per Technical Specifications and Clause-803 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Painting two coats with synthatic enamel paints over a coat of primer on any elevation on road kerb, parapet & guard post including cost of Paints & cost of all labour etc complete as per Technical Specifications and Clause-803 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Back Filling of surplus excavated earth behind Structures by manual means with initial lead 50m and lift of 1.50mtr including cost of all labour T&P required for the work etc. complete as directed by Engineer-In-Charge

Providing & Fixing 150mm dia PVC Pipe for utility services in the Footpath of Bridge including cost, conveyance of all materials & cost of all labour etc complete as per approved Drawing & Technical Specifications and Section- 2300 & 2700 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & fixing of RCC M-15 guard Post of 1.0m height and 15cm dia using 3.5kg steel reinforcement per each as per IRC:8-1980, fixing in position with painting & printing including cost, conveyance, royality of all materials & cost of all labour, machinery etc complete Technical Specifications and Clause- 804 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing & erecting a "W" metal beam crash barrier comprising of 3mm thick corrugated steel metal beam rail, 70cm above road/ ground level fixed ISMC series channel vertical post 150 x 75 x 5 mm spaced 2m centre to centre, 1.8m high, 1.1m below ground / road level, all steel part & filments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150mm x 75mm x 5mm, 330mm long complete as per clause-811 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing, fixing retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision).

90cm equilateral triangle

60cm equilateral triangle

60cm circular

80cm x 60cm rectangular

60cm x 45cm rectangular

90cm octagon

Providing, fixing of direction & place Identification Signs size upto 0.9sqm Board retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Providing, fixing of direction & place Identification Signs more than 0.9 sqm Size board retro-reflectorised, cautionary, mandatory & informatory sign as per IRC-67 made of high intensity gr. aluminium sheeting 1.5mm thick supported on MS circular pipe 65 NB firmly fixed to the ground by means of PCC M25 grade foundation of 2 x 45cm x 45cm x 60cm, 60cm below ground level as per drawing and Clause 801 of MoRT&H Specifications for Road & Bridge works (5th Revision).

Please Enable Macros to View BoQ information