Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.2 LAccepted-AOC | 1 | Accepted-AOC L-1 | |
| 2 | 2₹6.1 L+₹86,429 (16.5%)Rejected-AOC | 2 | Rejected-AOC L-2 | |
| 3 | 3₹6.2 L+₹98,115 (18.7%)Rejected-AOC | 3 | Rejected-AOC L-3 | |
| 4 | Not Admitted-PreQual/Technical | - | Not Admitted-PreQual/Technical Not Complied with technical specification | |
| 5 | Not Admitted-PreQual/Technical NOT AVAILABLE | - | Not Admitted-PreQual/Technical Not Complied with technical specification |
Tender Value
Refer Docs
EMD Value
₹12,500
Closing Date
25 Oct 2021, 3:00 pmClosed
Addl SE Civil Mtc Division ,PSTCL,Jalandhar
Addl SE Civil Mtc Division ,PSTCL,Jalandhar
Maintenance of Switch House Building at 220 kv Sub Station Dasuya
2021_POWER_73206_2
ET-63/2021-22
Open Tender
Civil Works
Item Rate
90 days
Dasuya
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹12,500
Yes
17 Nov 2021
18 Oct 2021
26 Oct 2021
18 Oct 2021
25 Oct 2021
18 Oct 2021
Amount
Regrading terracing of mud plaster covered with tiles or bricks in cement by dismantling tiles or bricks, removing mud plaster, preparing the surface of mud plaster to proper, slope, relaying mud plaster Gobri leaping and tiles or bricks grouted in cement mortar 1:3 (1 cement and 3 fine sand)
Cement concrete 1:2:4 gola10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
Replacement of worn out tiles with new one
Providing and fixing Polythene sheet 250 MICRON
1st brick work 1:5 in above plinth CSR ref 11.6 upto 4m
12.5mm thick cement plaster 1:4
Dismantling cement conglomerate floors (25mm to 50mm) thick with concrete base
Conglomerate floor 50mm thick cement conc. Topping 1:2:4
P/FAnti-skid floor tiles 10mm thick in flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with whitecement slurry in joints including corners angles and beading
Providing and fixing 1st quality ceramic glazed wall tiles manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sectionsJindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge
For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board in paneling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete
Providing and fixing of 5mm thick plane glass
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
Wiring fan point without fan box in PVC insulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.
Wiring light point in PVC insulated copper conductor singl core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.
Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVCinsulated copper conductor single core FRLS cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete wit\ FRLS cable (ISI marked) overall 1 sq. mm, 1100volts grade.
Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.
PVC insulated copper conductor single core FRLS cable (ISI marked) overall 2.5 sq.mm, 1100volts grade
PVC insulated copper conductor single core FRLS cable (ISI marked) overall 4 sq.mm, 1100volts grade
Supply and Erection of Heavy gauge PVC conduit pipe 25mm dia. (ISI marked 2mm thick) Flushed
Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete15mm i/d
Providing and laying, jointing fixing and testing G.I. Pipe lines B-Class including cost of specials such as tees, bends, sockets, elbows etc. testing, cutting, threading Inside building complete 20mmi/d
Providing, fixing and jointing G.I union complete on all respect 15mm i/d G.I union
Providing, fixing and jointing G.I union complete on all respect 20mm i/d G.I union
Providing, fixing and jointing gun-metal peet valves (Heavy Pattern) with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete.20mm i/d G.I union
Providing and fixing in position Chinaware European type water closet P trap or S trap (to the approval of the Engineer-in-charge) suite-consisting of 10 ltr. PVC flushing cistern supported on angle iron bracket, short bend 32 mm dia
Providing and fixing jet spray with 2'-6" long PVC pipe.With C.P. Brass nut
Providing and fixing in position best Indian make white ordinary lavatory suites consisting of C.P. brass waste 32mm dia, pair of angle iron bracket with one C.P. brass tap complete.Size 550 mm x 400 mm
Providing & fixing in position best Indian make (to be approval of the Engineer-incharge) vitreous Chinware white flat back or angular lipped front urinal size 440 x 315 x 265 mm C.P. brass flexible tube connection 450 mm long.
Providing & Fixing in postion 15 mm i/d bib cock of cp braas without flange (as approved by the Engineer-in-charge).
Providing, Stringing out U.P.V.C. Pipes casting asper IS:15328-2003 class-SN-8 along the trenches and laying the same in Trenches to correct alignment and gradients, cutting and jointing including cost of specials complete as per specifications. 110mm o/d pipe
Providing & Fixing in postion stop cock / Angle valve cp brass(as approved by the Engineer-incharge).C.P.brass 15mm stop cock Male and female end
Providing & Fixing in position best indian make bevelled edge 5mm thick mirror mounted on 4mm thick Cardboard sheet ground fixed in position by means of 4 nos. chromium plated brass screws and washers .Size 600mmx450mm
Providing and fixing in position towel rails of approved make including cutting and making good the walls etc CP brass Rails size 15mm dia 600mm long
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame complete 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x330mm
Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal
Providing and fixing in position S.S grating with Frame of approved brand
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)
Extra Carriage and Difference of materal for crushed bajri 13.2 mm
Extra Carriage and Difference of materal for crushed bajri 11.2 mm
Extra Carriage and Difference of materal for coarse sand
Extra carriage for tiles
Extra carriage for fine sand
Extra carriage for cement
diff. in material rate for Tiles
diff. in material rate for bricks
Extra carriage for tiles
KK CONSTRUCTION
PAUL AND COMPANY
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .