REPAIR AND MAINTENANCE OF PUMP SETS AND CONNECTED EXTERNAL WATER SUPPLY WORKS AT AFS BHISIANA

Amount

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including , ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and directed by Engineer in Charge.

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 200 dia complete with nuts,bolts,rubber gaskets etc including , iSI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and directed by Engineer in Charge.

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 100 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and directed by Engineer in Charge.

Taking out old U/S and Supply and fix CI body NRV valve conforming to IS of size 80 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and directed by Engineer in Charge.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 100 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and directed by Engineer in Charge.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 150 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size 150 mm complete all as specified and directed by Engineer in Charge.

Taking out old U/S and Supply and fix CI body Sluice valve PN 1.6 conforming to IS of size 200 dia complete with nuts,bolts,rubber gaskets etc including ,ISI marked ,including jointing material such as rubber gasket,bolts,nuts,etc suitable for size complete all as specified and directed by Engineer in Charge.

Taking out unserviceable and supply and fix new Foot valve suitable for 150 mm dia bore pipe complete all as specified and directed by Engr-in-Charge.

Supply and fix CI fittings flanged end up to 300 mm dia bore such as Bends (any type radious and angle ) tapers any type , (straight, bens increasing, decreasing or double socket etc) Tee places single branch , 'Y' junction , double branch , cross (all sockets or socket and spigot ) collars caps and plugs, mechanicla joints suitable for 200/250/300 mm pipe, complete all as specified and directed by Engineer in Charge. Note: The cost shall be included for nut bolt any size and length rquire to fix , joint of MS pipe and joint , elbow , Tee, , Bend , Flanged ro existing pipe suction and delivery

Supply and fix CI fittings flanged end up to 150 mm dia bore such as Bends (any type radious and angle ) tapers any type , (straight, bens increasing, decreasing or double socket etc) Tee places single branch , 'Y' junction , double branch , cross (all sockets or socket and spigot ) collars caps and plugs, mechanicla joints suitable for 150 /80/100 mm pipe, complete all as specified and directed by Engineer in Charge. Note: The cost shall be included for nut bolt any size and length rquire to fix , joint of MS pipe and joint , elbow , Tee, , Bend , Flanged ro existing pipe suction and delivery

Supply and fix in replacement of construction of valve pit chambers of size 1.5m X 1.50mX 1mtr (internal dimensions) as under provided with 10 cm thick PCC 1:4:8 type D2 as in foundation over 15 cm thick hard core, 23 cm thick brick walls built in cement mortar 1:4, 15 mm thick internal plaster including top of floor, externally upto 150 mm below GL in CM 1:3 finish even and smooth without using extra cement, 4 mm thick MS sheet cover with 40 x 40 x 6 mm MS angle frame fixed in PCC 1:2:4 type B1 coping with 25 x 6 mm flat iron hold fasts, hinges, handles, locking arrangements and applying 2 coats of synthetic enamel paint over acoat of red oxide primer to all steel surfaces and 3 coats of white wash to internal surfaces of chamber including excavation and earth work in any type of soil and removing of surplus soil to a distance not exceeding 50 m complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for run lead joints for 300mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for run lead joints for 250mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for run lead joints for 200mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for run lead joints for 150mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for run lead joints for 100mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for run lead joints for 80mm dia spigot and socketed CI pipe fittings including spun yarn etc. complete all as specified and directed by Engineer in Charge.

Taking down electric motor 40 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump all as directed.

Replacement of ball bearing of above motor bearing No -NBC 6309 with providing of high grade grease complete all as specified and directed by Engineer in Charge.

Taking down electric motor 25 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump acomplete all as specified and directed by Engineer in Charge.

Replacement of ball U/S ball / roller bearing of above motor bearing No -NBC 6307 with providing of high grade grease, complete all as specified and directed by Engineer in Charge.

Taking down electric motor 10 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump complete all as specified and directed by Engineer in Charge.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed by Engineer in Charge.

Taking down electric motor 7.5 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump complete all as specified and directed by Engineer in Charge.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed by Engineer in Charge.

Taking down electric motor 05 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump complete all as specified and directed by Engineer in Charge.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed by Engineer in Charge.

Taking down electric motor 01 HP 415 volt coupled to pump after disconnecting the electrical connection, and earth connections from its foundation and transportation to work shop , checking the serviceability of ball bearing gboth side of motor , greasing of bearing up to free rotation of shaft of motor complete, greasing on reassemblying the motor to reinstallation on foundation, reconnecting back the cable and earth connections etc complete in all respect and starting the pump complete all as specified and directed by Engineer in Charge.

Replacement of ball U/S ball / roller bearing of above motor bearing of existing make with providing of high grade grease complete all as specified and directed by Engineer in Charge.

M&L for opening pump from Sewage under ground sump 09 mtr depth or any pump house using lifting crane or suitable equipment to lift the pump from09 mtr depth or pump house set split case centrifugal type coupled to electric motor of capacity 40 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works complete all as specified and directed by Engineer in Charge.

Supply only spare parts for pump set for fixing against item No.as follows:-

a) Supply only key for main shaft/impeller

b) Supply only check nut for pump set shaft

c) Supply only stuffing box bush

d) Supply only motor pump coupling complete with nut, bolts etc

e) Supply only water seal

f)Supply only stuffing box packing

g) Supply only rubber tyre coupling complete make Fenner/Unique/Unimac NO TC-16/TC-14

h) Supply only pump set bearing housing .

j) Supply only pump Shaft

k) Supply ball/roller bearing complete

l) Supply only Air relase valve

m) Supply only Impeller Note:All the items/parts mentioned against 31(a) to 31(m) here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item No above. Cost of fixing of items is deemed to be included in the unit rate of item above

M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 25 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works complete all as specified and directed by Engineer.

Supply only spare parts for 32 pump set for replacing vide item No. as follows:-

a) Supply only pump shaft sleeve made out of gun metal

b) Supply only key for main shaft

c) Supply only check nut

d) Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

g) Rubber coupling as per sample suitable for 20 HP Centrifugal pump complete all as specified and directed by Engr-in-Charge. Note:All the items/parts mentioned against 33.1 to 33.7 shall be suitable/compatible for the type and make of pumping set as mentioned against item No. 32

M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 10 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works complete all as specified and directed by Engineer in Charge.

Supply only spare parts for 34 pump set for replacing vide item No. above as follows:-

a) Supply only pump shaft sleeve made out of gun metal

b) Supply only key for main shaft

c) Supply only check nut

d) Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

g) Supply only rubber tyre coupling complete make Fenner/Unique/Unimac Note:All the items/parts mentioned against 34.1 to 34.7 shall be suitable/compatible for the type and make of pumping set as mentioned against item No. 34

M&L for opening pump set split case centrifugal type coupled to electric motor of capacity 7.5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works complete all as specified and directed by Engineer in Charge.

Supply only spare parts for 7.5 pump set for replacing vide item above as follows:-

a) Supply only pump shaft sleeve made out of gun metal

b) Supply only key for main shaft

c) Supply only check nut

d) Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

M&L for opening pump set split case monoblock /Submersible pump type coupled to electric motor of capacity 5 HP, make Kirloskar Compton from motor coupling after isolating the electric and earth lead connections opening the pump set for repair/overhauling & proper alignment of shaft etc including replacing the items with new items given vide item below, reassemblying the pumpset greasing connecting, testing and commissioning complete including necessary Lathe works complete all as specified and directed by Engineer in Charge.

Supply only spare parts for 38 pump set for replacing vide item above as follows:-

a) Supply only pump shaft sleeve made out of gun metal

b) Supply only key for main shaft

c) Supply only check nut

d) Supply only water seal

e) Supply only pump Shaft

f) Supply ball/roller bearing complete

Dismantling Submersible pump set 10 HP 3 phase 415 V from borewll along witth colum pipe using lifting crane or suitbale equipmment to lift out submersible pump from borewell and after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc for repair/overhauling including replacing the unserviceable parts and jointing of new submersible canle given in schdeule with new items given vide item No given below and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified.

Supply only spare parts for pump set of capacity 10 HPvide item above as follows:-

a) Supply only key for main shaft

b) Supply only check nut

c) Supply only impeller any matrial

d) Supply only water seal

e) Supply only submersible bearing complete

M & L for Rewinding of pump motor 415 Volt 3 phase after disconnecting electric cable and eath lead, suction and delivery pipes, from 09 mtre depth of sewage well or pump house or any location directed by JE E/M shifting to work shop, dismantling the motor assembly and removing the burnt out copper winding of stator and Rotar cleaning the stator slots and core assembly, rewinding to stator and rotar with suitable gauge super enamelled copper wire with insulating papers and insulation cloths, varnishing the winding and baking heating for achieving the required insulation resistance, re-assembling the motor and testing complete, incl transporting back to site and fixing motor to its original place, reconnecting electric cable and earth leads etc testing and commissioning complete in all respect all as specified and as directed by Engr-in-charge for the following capacity: -

(a) up to 5 hp

Dismantling booster pump 0.5 to 1 hp 3/1 phase 415/250 V from foundation base plate after isolating the electric and earth lead connections, suction and delivery pipes etc opening the pump set, motor rotor and stator etc for repair/overhauling and warnishing and baking the stator winding to enhance the insulation level including replacing the unserviceable parts with new items given vide item No given below and reassemblying the pumpset and reinstalling on foundation frame connecting, testing and commissioning complete all as specified.

Supply only spare parts for pump set of capacity 0.5 to 1 HPvide item No. 43 as follows:-

(a) Pressure switch suitable for 1 hp

(b ) Float switch

(c) Y Type strainer

(d) Pressure gauge

(e) SS flexible pipe

(f) NRV 25 mm Note: All the items/parts mentioned against 44.1 (a) to 44.6 (f) to here-in-before shall be suitable/compatible for the type and make of pumping set as mentioned against item Cost of fixing of items is deemed to bne included in the unit rate of item

Taking out U/S & Taking out unserviceable and supply and fix new Butter fly valve (ISI marked), with iron handle, suitable for 100 mm bore iron pipe and fixed including testing complete all as ifed and directed by Engr-in-Charge.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 40mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 25 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

Taking out unserviceable and supply and fix new Gun metal globe or gate valve (ISI marked), with iron wheel head, screwed both ends, suitable for 20 mm bore iron pipe and fixed including testing complete all as specifed and directed by Engr-in-Charge.

Taking out unserviceable and supply and fix new Foot valve suitable for 100 mm dia bore pipe complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of Earthing complete with GI earth plates electrode 600x600x6mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level surrounded with adequate quantity of charcoal dust mixed with salts to a packet thickness of 15 cm all around the plate,using GI earth strip 25x4 mm connected to earth plate by means of nut ,bolts and washers as directed GI pipe light grade 50mm bore on water pipe from earth chamber to copper edge of earth plate,CI funnel with wiremesh fixed on water pipe and PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in pit chamber and RCC pitcover 50mm thick pre-cost RCC 1:2:4 type B-1 dully rainforced with MS bars 6mm dia @150 cc both ways with 10mm dia MS bar in lifting handle excavation earth work including laying of GI pipe in walls etcall as directed in electrical plate No 3 of SSR pt I complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 185 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 50 sq mm 3.5 core laid in trenches or passing though pipe/or fixed with wall/ pole etc, including testing complete all as specified and directed by Engr-in-Charge.

Supply and lay Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/ sq cm fixed complete and including with all pipe fittings such as ends, sockets, elbows, unions,tees, reducing tees, adopters,socketrs, plugs, hose clips etc. of size 40 mm bore Note for protecton of xlpe cable in lieu of sand, complete all as specified and directed by Engr-in-Charge.

Supply and laying sub class 'B' bricks of size 230x113x75 mm for protection of UG LT cable complete all as specified and directed by Engr-in-Charge.

Taking out U/S & S&F DOL stater suitable for 5HP to7.5HP electric motors including necessary electric connections complete all as specified and directed by Engr-in-Charge. Make C&S Model No BE!SPSSDX204321-B /L&T/HPL

Taking out U/S & S&F Star-Delta stater suitable for 10HP electric motors including necessary electric connections complete all as specified and directed by Engr-in-Charge. Make C&S Model No BE3SPSSDX404355A-4 L&T/HPL

Taking out U/S & M&L for repairs to UNSV star delta starter for pump set 40HP by replacing terminal overload relay, coil of any other parts required for proper functioning of pump sets, complete all as specified and directed by Engr-in-Charge.

Taking out U/S & M&L for repairs to UNSV star delta starter for pump set 20HP by replacing terminal overload relay, coil of any other parts required for proper functioning of pump sets, complete all as specified and directed by Engr-in-Charge.

Taking out U/S & M&L for repairs to UNSV star delta starter for pump set 10HP by replacing terminal overload relay, coil of any other parts required for proper functioning of pump sets, complete all as specified and directed by Engr-in-Charge.

M&L for Servicing, cleaning, checking the entire electrical control wiring of the LT system colour coding the same , replacing the same , replecing the U/S wire(any size) , lugs, thimble, Indicator lamps (RYB), including nuts, bolts and making inter locking system functional,cleaning with pump & CRC testing complete and making good the defects complete all as specified and directed by Engr-in-Charge.

Taking out U/S & Supply & fix 3 pole contractors type MNX -95, Rating 160 amps, 415 volts and coil voltage - 220 volts, complete all as specified and directed by Engr-in-Charge.

Taking out U/S & Supply & fix 3 pole contractors type MNX -70, Rating 63 amps, 415 volts and coil voltage - 220 volts, complete all as specified and directed by Engr-in-Charge.

Taking out U/S & Supply & fix 3 pole contractors type MNX -45, Rating 40 amps, 415 volts and coil voltage - 220 volts, complete all as specified and directed by Engr-in-Charge.

Taking out U/S & S&F in replacement 3 pole Contactor 40A , 415 VAC, 50 Hz as per IS 60947-4-1 complete as per existing Make & Type, complete all as specified and directed by Engr-in-Charge.

Taking out U/S & S&F in replacement Single Phase Preventor (VSP 3), 415 VAC, 50 Hz complete as per existing Make- Minilec, complete all as specified and directed by Engineer in Charge.

Taking out U/S & S&F in replacement Thermal over load relay 9- 32 A, 415 V, 50 Hz as per existing Make & Type, complete all as specified and directed by Engineer in Charge.

Taking out U/S & S&F in replacement of Electronic timer Star-Delta of 3S-120 Second as complete all as specified and directed by Engineer in Charge.

Taking out U/S & S&F Amp Meter 0-200 Amps digital type capacity square type complete all as specified and directed by Engineer in Charge.

Taking out U/S & S&F Voltmeter 0-500 volt digital type in cluding requred wiring capacity square type complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for gland flange suitable for 5 to 40HP monoblock pump set incl replacement of gland packing complete all as specified and directed by Engineer in Charge.

Taking out U/S & M&L for JEN/ rubber insertion packing suitable for Pump 40 HP TOP /200mm CI foot valve / suction pipe flanged incl replacement of U/S nut and bolts, complete all as specified and directed by Engineer in Charge.

M&L for painting of suction and delivery pipenot more than 5 mtrs and motor pump set of capacity up to 40 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed by Engineer in Charge.

M&L for painting of suction and delivery pipenot more than 5 mtrs and motor pump set of capacity upto 10-20 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed by Engineer in Charge.

M&L for painting of suction and delivery pipenot more than 5 mtrs and motor pump set of capacity upto up to 05 HP after removing all dust, dirt etc and clean the surface thoroughly with two coats of synthetic enamel paint including writing the complete all as specified and directed by Engineer in Charge.

Taking out U/S & S&F MCCBs 63 Amps,4pole having rupturing capacity 16KA,415 volts including termination point for connection complete all as specified and directed by Engineer in Charge.

Taking out U/S & S&F MCCBs 125 Amps,4pole having rupturing capacity 25KA,415 volts including termination point for connection complete all as specified and directed by Engineer in Charge.

Taking out U/S & S&F MCCBs 400 Amps,4pole having rupturing capacity 36KA,415 volts including termination point for connection complete all as specified and directed by Engineer in Charge.

M & L for replacement of on-load Change Over of capacity 400A, 4 Pole 415 volts with suitable ms sheet enclosure as recommended by OEM , suitable for wall mounted including termination point for connection complete all as specified and directed. Note The cost shall be included for fixing of existing size 400 sqmm 3 .5 core lt cable with lugs & thimbles made of copper matrial incoming and out going

Taking down U/S & Supply and fixing in replacement of butterfly valve of size 150mm dia as per exiting sample/ size complete all as specified and directed by Engineer in Charge.

Taking down U/S & Supply and fixing in replacement of butterfly valve of size 200 mm dia as per exiting sample/ size complete all as specified and directed by Engineer in Charge.

Taking down U/S & Supply , fixing , testing commissioning of motor actuated valve of size 150 mm dia complete single phase motor actuated with gear box valve set with disc material of CI with nylon coating, hand wheel for manual operation, pressure rating of 10 kg/sq cm and having 02 nos limit switches for open / closed condition and capability of accepting 4-20mA input complete set complete all as specified and directed by Engineer in Charge.

Taking Down US & Supply , fixing , testing commissioning of motor actuated valve of size 200 mm dia complete single phase motor actuated with gear box valve set with disc material of CI with nylon coating, hand wheel for manual operation, pressure rating of 10 kg/sq cm and having 02 nos limit switches for open / closed condition and capability of accepting 4-20mA input complete set of existing compatible Make-Ritetork/Astech/Emtork, complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of rust proof, maintenance free magnetic float switch / water level sensor as per exiting compatible Make RDS/ATS (As approved by GE), complete all as specified and directed by Engineeer in Charge.

Takinng down U/S & Supply and fixing 2 core 1.5 sq mm PVC sheathed and PVC armoured Copper cable etc as required complete all as specified and directed by Engineer in Charge.

Takinng down U/S & Supply and fixing 6 x 1.5 sq mm PVC sheathed and PVC armoured Copper cable etc as required, complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of 5 pair of 0.5 mm dia armoured copper cable suitable for sensoring with suitable size of PVC conduit pipe as per exiting sample/ size duly fixed on wall of over head tank, complete all as specified and directed by Engineer in Charge.

Supply and fixing in replacement of Motorized Butterfly Valve Encloser for MOV size of 150 mm complete all as specified and directed by Engineer in Charge.

Excavation in trenches in soft/loose soil n.exc 1.5m wide and n. exc 1.5m depth for laying pipe line, complete all as specified and as directed by Engineer-in-Charge.

Returning & filling including spreading, leveling watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and directed by Engineer in Charge.

Removal of surplus excavated soil to a distance n. exc 50 m and depositing where directed at a level not exc. 1.5 above the starting point complete all as specified and directed by Engineer in Charge.

Taking down u/s and Supply and fix MS nuts bolts of required size or sample availbale at MES Office of glands cover & sluice valves complete all as specified and directed by Engineer in Charge.

Taking down u/s and Supply and fix rubber sheet size 3 mm thick complete all as specified and directed by Engineer in Charge.

Supply and fill in replacement of Grease.in various motor/pump complete all as specified and directed by Engineer in Charge.

Taking down U/S and S&F gland packing in to the pump and sluice valve of any capcity and size all as specified and as directed. The cost of including checking of gland packing in pump houses situated at AF Stn Bhsiana on daliy basis if found absent plumber/ pump mechanic penallty willbe recovered @ 500 Per/day, complete all as specified and directed by Engineer in Charge.

Supply and replace NRV TIKKI 150 mm & 100 mm/80 mm dia suitable for CI body NRV/Foot valve including nut boltT washer rate included for removing and refixing in to the pipe in sump /pump house, complete all as specified and directed by Engineer in Charge.

M&L for repair to valve pit of size 90x90x90 M and replacement of valve pit cover with MS cover and including MS sheet cover fabricated from 3 mm thick MS sheet and frame of angle iron 40 x 40 x 6 mm with fixing arrangement, hinges and locking arrangement and painting two coat of synethetic enmel paint over a coat of red oxide primer on MS cover and frame, complete all as specified and directed by Engineer in Charge.

Repairs to gate and replacement of spindle suitable for 150mm sluice valve complete all as specified and directed by Engr-in-Charge.

Repairs to gate and replacement of spindle suitable for 100mm sluice valve complete all as specified and directed by Engr-in-Charge.

M&L for attending complaint of finding mechanial and electrical fault in centrifugal/monoblock/booster pump and induction motor three phase and single phase in supply system regarding not lifiting of water by pump , no priming in pump, tighting of nut bolts , leakge in pump , alignmnet of pump with motor, NRV/sluice valve, tightning leakge, complete all as specified and directed by Engineer in Charge.

S&F in replacement of 210 watts LED Flood light for highly efficient LED Flood light with lens made of pressure die cast aliminium housing, extruded aluminium heat sinks & enclosed with toughened glass IP-66 fitted on the wall/ roof top/pole/ High Mast tower etc. with the help of nuts,bolts, clamps PCC work including connection with 2.5 Sqmm 3 core copper wire, complete all as specified and as directed. Note :- The quoted unit rate shall include all T&P i.e Ladder, Tools, Safety gloves etc shall be provided by the contractor without any extra cost.

S&F in replacement of Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer in Charge.

S&F in replacement of Supply and fixing Bldg security light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engineer in Charge.

Supplying and laying synthetic Rubber insulated mats 2 mm thick for voltage upto 3.3 kv for electrical purpose as per IS 15652-2006, (superseding IS 5424) suitable for electrical shock safety of sizes 2mx1m, complete all as specified and directed by Engineer in Charge.

Supply, Installation and laying for XLPE Insulated, armoured heavy duty electric cable with aluminium conductor, PVC sheathed, stranded conductor, 1100 volts grade, cross-sectional area of size 10 sq mm 4 core laid in trenches or passing though pipe/or fixed with wall/ pole etc complete all as specified and directed by Engineer in Charge. (Motorised valve (Pichora)

Cutting of grass up to 02 mtr length Shurbs with routs, bushes, hedges etc with route including leveling all side of Mini Pump houses , Silver Jubilee, Ahuja /Main Pump House igreens/bushes and any other vegetation upto complete entire satisfaction of Engineer-in-Charge and deposting the same at a distance outside MD land away 150 mtr from site complete all as directed. Note The cost shall be included Removing/ of grass , bushes with route below 30 cm under ground and refilling again and making smooth surface all as specified and dir by Engr-in-charge

Taking out old unserviceable, broken, rusted name board of any type and size all as specified and Supply, Installation and Commissioning of LED Name board of MES MAIN PUMP HOUSE with engineers monogram of ACP sheet for board and background colour is blue and LED acrylic letters in white colour of 1.5 watt & LED driver of Hilite or equivalent make and size of board 8`x 4`incuding Material and labour for supports frame / clamp and back plate fabricated from MS square pipe of size 50x50mm for standing of board for leg purpose including nuts , bolts washers, welding bending cold or hot drilling holes for bolt in any shape of size as indicated or directed and inclusive of one primer coat , one under coat and one finishing of coat of paint complete all as specified and directed. Including cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping etc complete including point wiring with 1.5 sqmm FR PVC insulated cable multistranded coppper conductor drawn through & including ISI marked PVC conduits including 5 Amp switch & socket, box mudular type, complete all as specified and directed by Engineer in Charge.

S&F in replacement of battery chargr from AC to DC 12 Volt input Range: 170V to 270V Output voltage: Float Mode 13.3V to 13.5V DC; Boost Mode 13.8V to 14V DC Charging current: Float mode 0 amps to 3 amps; Boost mode 10 amps Naturally Air Cooled and wall mounting available Low Standby Power Consumption and High Efficiency of approved make, complete all as specified and directed by Engineer in Charge.

Note No 01 : Contractor shall make his own arrangements to access various floors/bldgs and to provide tools and plants for taking down and refixing of pipe line/fittings of various material. The cost also shall be included for fixing of EACH fittings such as elbow, union, socket , Tee, Nipple or laying of every 01 mtr pipe of GI/DI/CI in every location/Bldgs or EACH complaints . The rate quoted shall be deemed to include all fittings such as elbow, union, socket, TEE, flange, etc required to rectify complaint in EACH location. The Contractor could not ask at only one or two site for execution of all CA quantities. They shall be bound to attend complaint as per user requirement or directed by Engr-in-Charge.

Note No 02 :Contractor shall arrange 02 fitter and 02 helper for attending of complaint day to day on daily basis they will be report to AGE E/M office on every day at 0800 Hrs to 1600 Hrs.. Non Attendance of complaint by the contractor's Representative will be intimated to GE office on the same day to make recovery and to avoid any litigation later on. If absent on attending of complaint @1000 recovey will be penalty per day and recovey will be made on RAR/Final bills. The contractor will produced attendance register duly signed by AGE E/M, and JE E/M on process of RAR. Without these document payment will not made to the contractor

Note No 03: The Engineer in Charge shall intimate the scope of work as per BOQ to be executed on daily basis in writing through Works Site Order Book as under condition 44 of IAFW 2249 to contractor's labour for execution of work. The contractors representative will give completion reposrt of the work executed on the same day at 1600 hrs duly signed by users. All these works documents shall be attached along with RAR for payment to the contractor. No Works beyond this contract shall be intimated to contractor.

Note No 04: Contractor will rectify the defect within 24 Hrs receiving the complaints by Phone or message by Rep of GE. If he failed to rectify the complaint within 24 Hrs @ Rs 500/- per day per complaint will be reovered in RAR/ Final Bill.

M/S J J ENTERPRISES

M/s R.K. CONSTRUCTIONS

classic estate developers

KAY VEE CONSTRUCTIONS

M/S JAINENDRA KUMAR JAIN

M/s Luxmi Constructions