RequiredExperience with Government
RequiredAnnual Turnover Bid to RA enabled No Self Propelled Road Sweeping Machine (Medium) ( 1 pieces ) Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Certification Complete Equipment Certification (Chassis + Cleaning Equipment) ARAI/VRDE/ICAT/CMVR notification Yes * Equipment Certification (Chassis/frame + Cleaning Equipment) - * 1/5 ARAI/VRDE/ICAT/CMVR notification No Availability of test reports for all critical components from the manufacturer or OEM of Engine
Requiredhydraulic pump
Requiredhydraulic motor
Requiredblower etc
Requiredshall be from any ILAC/NABL accredited/Central Govt Lab To be furnished to buyers on demand Yes * Manufacturer should be ISO certified Yes Yes Registration To Local RTO(Regional Transport Office)/RTA(Regional Transport Authority) By Seller Yes * Hydraulic cylinder and hydraulic pump used conforming to ISO/IS specifications Yes * Dust control environment (PM 10 100% and PM 2point5 90%) Yes * Generic Parameters Engine capacity in CC 2970 2970.0 - 5000.0 Or higher Self Propelled Machine manufactured by OEM Yes * Type of Fuel Diesel Diesel Self Propelled Machine Gross Vehicle Weight 7260 More than 7260.0 Or higher Kerb Weight 5060 * Engine Capacity in HP 80 More than 80.0 Or higher Pay Load Capacity 2200 More than 2.2 Or higher Vehicle Emission Compliance BS-IV BS-IV Max Engine BHP (hp) 80 More than 80.0 Or higher Rated RPM at max engine HP 1800 * Max Engine Torque 274 More than 274.0 Or 2/5 (N-m) higher Rated RPM at max torque 1800 * Maximum Speed of Vehicle (Kmph) 40 * Type of steering Power operated Power operated Min Turning Radius 4700 Less than 4700.0 Or lower Applicability of traction speed of hydrostatic drive Yes Yes If yes
RequiredTraction Speed of Hydrostatic drive 40 More than 40.0 Or higher Applicability of sweeping speed of hydrostatic drive Yes Yes If yes
RequiredSweeping Speed of Hydrostatic drive 10 More than 10.0 Or higher Type of Brake - * Gradeability of Vehicle 18 * Ground Clearance boom up 150 * Wheel Base 2640 More than 2640.0 Or higher Engine Aspiration System Turbocharged Turbocharged Fuel Tank Capacity 82 More than 82.0 Or higher Constructional Parameters No of Brooms/brush 4 More than 4.0 Or higher Max sweeping width with central broom
Requiredtwo side broom and front brush 2600 More than 2600.0 Or higher Volume of container 3300 More than 3300.0 Or higher Material of container confirming to IS:2062 Grade A * Dust control Filter based Filter based If water sprinkler type
RequiredWater Tank Capacity 400 More than 400.0 Or higher Sweeping speed 10 More than 10.0 Or higher 3/5 Central broom length 1300 More than 1300.0 Or higher Central broom diameter 520 More than 520.0 Or higher Side broom diameter 875 More than 875.0 Or higher Front brush sweeping length 500 More than 500.0 Or higher Hopper Dumping Height 1600 More than 1600.0 Or higher Hopper Dumping arrangement - * Noise as per CPCB norms 80 Less than 80.0 Or lower Length of suction pipe 4500 4500.0 Diameter of suction pipe 150 More than 150.0 Or higher Cleaning Method Combination of both Conveyer and Vacuum Type Combination of both Conveyer and Vacuum Type Blower suction pressure 78.45 More than 0.07845 Or higher Blower suction flow (Cu-m/hr) 2995 More than 2995.0 Or higher Accessories and Spares Safety device Yes * Performance Parameters Warranty Time (complete equipment with all parts) 24 More than 24.0 Or higher No of Free Service 6 6 * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
