PROVN OF RAIN PROTECTION SHED FOR 40 QTRS OF DK I AND 35 QTRS OF DK II UNDER GE CENTRAL DELHI CANTT10

Amount

Excavating in post holes soft/loose soil (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed.

M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate) as in foundations, filling and mass concrete, complete all as specified and directed

Removing excavated soil materials n.exc 50m and depositing where directed at a level, n exc 1.5m above the starting point complete all as specified and directed.

M&L for rolled section as in main and cross beems, hip and jack rafters, purlins where connected to common rafter and running rails and guides for sliding door fixed with angle cleats are other connection plates etc Fe 410 -W (GdeE- 250) quality A all as specified and directed.

S & F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L for Straight or Circular raking Fair cutting n exc 10 cm width or girth on exposed surfaces of brickwork such as in splays, chamfers, etc.including rubbed finish and good well surface all as specified and directed.

M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.

S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with gray cement and no pigment, any shape and size confirming to IS- 15658 -2006 of 80mm thickness, M-40 Gde,Over and including 20mm thick layer of sand complete all as specified and directed.

M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base over rammed earth.

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, including form work to concrete surfaces, complete all as specified.

S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified.

M & L for 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MoD land), complete all as specified.

M&L for rectified coloured ceramic tile 300x300x6-8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed. ( Make: Digital ceramic digital Seriese of Somany or Equivqlent to Orient/Kajaria)

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removal of rubbish outside complex ( MoD land), complete all as specified.

M&L form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified.

M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor, roof and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n.exc 10 cm wide for rough finished surfaces of concrete, complete all as specified.

Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) , not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified.

M & L for reinforced cement concrete 1:1.5:3 type B-1, (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on walls, landing, balconies, shelves and like, complete all as specified (Reinforcement & form work shall be measured & paid under respective items).

Taking down of cement plaster on brick /stone masonary or concrete surface including racking out joints, hacking for key, scrubbling down with water, complete all as specified

M & L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified.

Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified.

S&F for 15 mm bore medium grade GI tubing with all fittings fixed to wall and ceiling or laid in floors complete all as specified.

Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete article, complete all as specified.

M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified.

Dismantling floor, hearth wall tile incl cement mortar bedding (but not backing) removing serviceable tiles and rubbish out of premises, all as specified.

M&L for rectified coloured ceramic tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 all as directed.

Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified

S&F factory made PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelam PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimum of 4 Nos. of screws to be provided for each vertical member and minimim 2 Nos for Horizontal members Complete all as per manufacturers specifications and as directed.

S&F factory made 18mm thick single extruded WPC (Wood Polymer Composit) Solid Board having density not less than 600 kg/ Cum one side white and other side of board laminated with PVC Foil including finishing all edges at all level for making edge lipping /beading or .. 50 mm thick PVC sheet lipping at all 4 edges using binding tape, Solvent, screws, stainless steel, Piano hinges / self closives box type hinges etc Manufactured by ISO 9001-2008 certified company.

S & F in repair stainless steel drapery Rod 25mm dia , including wooden side caps, brackets, and rings @ 120mm c to c, complete all asspecified and approved by the Sample of Chief Office.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified.

M&L for Black Granite slab 20 mm thick rubbed and polished machine cut, set in cement mortar jointed with white cement complete including bedding layer 15mm thick in cement mortar 1:6 over cooking platform & making hole for gas pipe etc through precast RCC slab & granite stone etc incl rounding of exposed edges, complete all as specified.Note:- Colour of Granite approved by the direction of Garrison Engineer.

S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified .

S&F stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing china ware sink with waste fittings complete all as specified.

S&FStainless Steel plate rack (Gde-304)of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plate rack, complete all as specified.

S&F stainless steel handle of size 150mm size long complete all as specified.(Make-Kitch/Arch/Q-rail/D-line)

S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified.

S&F Modular Kitchen trolly/Basket cupboard and cabinate Confirming to Stainless steel of AE - SI grade 504 as per size Required for complete all as specified.

M&L for stainless steel telescopy channels 22" long fixed in cupboard complete all as specified and as direct by Engineer in charge.

S&F for furniture Drawer Cupboard cabinet lock with Dimple Computer key 32MM complete with screws, complete all as specified.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified.

Taking down shutters of any description exc.1 sq.m and n.exc 2 sq.m complete all as specified.

M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed stainless steel wire staple, complete all as specified.

S&F stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified.

S&F mild steel 300mm ordinary rat tail, rod pattern, springs including roller and roller plate complete all as specified.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified.

S&F factory made solid PVC wire gauged door shutter 35mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail. The wire gauge shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aparature 1mm, wrapped on an additional square 8mm MS solid tube and this tube shalll be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and directed.

S & F factory made solid PVC moulded door shutter 35mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam PVC sheet on back face complete all as specified and directed.

S&F stainless steel handle of size 200mm size long complete all as specified.

S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified.

S&F stainless steel of AE - SI 316 grade barrel tower bolt 200 mm long , extruded sections complete all as specified. make-Kitch/Arch/Q-rail/D-line)

S&F in repair vitreous China coloured European type WC (single piece)including connection to drain,'P' trap and fixing bolts ,plastic water closet seat cover complete all as specified.

SHREE RAM BUILD TECH

M/s Verma and Co

JYOTI ENTERPRISES

imran construction company

M/S ANIL KUMAR

The new hut furnitures

MINHAS CONSTRUCTIONS

VED PRAKASH ARORA

Shiv Shankar Nirman Co.

M/s. Kansal Construction Co.

ANANYA ENTERPRISES