Annual maintenance of electrical Equipments and maintenance of Crematorium at Kempapura, in Hebbala Kempapura Ward-No 09

Annual maintenance of electrical Equipments and maintenance of Crematorium at Kempapura, in Hebbala Kempapura Ward-No 09

Skilled Electrician Notification No. KAE 69 tWA 2022, dateds0-l,-2022 Minimum Wages With effect from 30-11.-2022. Minimum wages and VDA from 0L44-2024 to 3143-2025

Assistant Technician Semi Skilled Notification No. KAE 69 tWA 2022, dateds0-l,-2022 Minimum Wages With effect from 30-11.-2022. Minimum wages and VDA from 0L44-2024 to 3143-2025

Wiring for lighting /power circuit using one of FRLS PVC insulated 1100V grade,multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and drawing Flexible Multi core Cable manufacture dwith electrolytic grade flexible copper with low conductor confirming to IS8130-1984 and (Virgin) PVC insulation sheathed suitable for work...

GI/Copper strips for grounding connections, usingnecessary fixing materials as required.50 x 6 mm Copper strip

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.160Amps

Supply and fixing of 4 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and a...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit break...

Supplying, installation, testing & commissioning of 12V ..AH batteries in poly propylene container for D.G. sets. Low maintenance batteries, plate type.150 AH capacity

Supplying and fixing FOUR Pole Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Prote...

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947.160 A

Supply, installation in position, testing and commissioning of Addressable thermal detector (heat) radio-linkedoptical detector operates witha rateof rise thermal sensor. Thedetector communicateswitha...

Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.125 A

Supplying & fixing of retrofit type-LED bulb......W with OPAL acrylic diffuser comprising of LED source with CCT6500 degree K,CRI 70%. efficacy 80 lumen per W, life 25000 burning hours and Compliance ...

Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Po...

Material components a)Soap powder

Coconut Broom stic

Supply of Air Freshner cakes(1)

Supply of Room Freshner

Supply of Urinal cakes()

Supply & erection of B-58 belt

Supply & erection 2HP 3Phase, 50Hz, 1440 RPM induction flange mounted water pump for Scrubber, inlet 2 inch, outlet 1 .5 inch,

Supply & erection of 1HP single phase 50Hz water pump (open well Submersibal pump set)

Supply & erection of Smoke exhaust motor 7.5 Hp 3 phase, 50Hz,1500rpm, induction motor, with table lock pully 180 dia, 2 Nos grove, MAKE ABB/Kirloskar/Suguna or Equalent

Supplying & fixing of Coil Holding Refractory Bricks suitable for vertical coil insertion system electrical crematorium furnace conforms to IS-2042. The bulk density of the brick will be max of 2.20gm...

Supplying & fixing of 3.5 KW Heating coils made out of 5.8mm thick APM wire, heating Zone should be 950mm length, End terminal rod SS 304 grade 10mm dia 550mm length suitable for vertical mounting sys...

Supplying & fixing Body Laying With 70% aluminium Moulded Refractory Bricks (MCL) suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS...

Supplying of refractory cement FIRECRETE super (25 kg/bag) for casting refractory bricks

Supplying of refractory cement fine ACC-50 (25 kg/bag) for casting refractory bricks

Supplying & fixing of Refractory cement white heat K ACC make for casting refractory bricks. 25 kgs bag

Supplying & fixing of FIBER blank kit 128 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

Supplying & fixing of Refractory Slabs (MCL) suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528, max working temper...

Servicing & cleaning of Scrubber, Tank,Scrubber duct,Exhaust Blower, Exhaust Duct Furnace to Chimny and cleaning of chimny (6 monts once)

Providing servicing, repairing and overhauling of existing body charging trolley complete.

Furnace main door servicing include of bearing replacement 2 nos and door lifting chain replacement()