Construction of Mini Handloom Park at Murungatholuvu village, Chennimalai, Erode District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

1.4 : Earth work excavation for Open foundation (including refilling) a. 0 to 2 mt.

37.1 : White washing 3 coats (slaked)

41 : Painting - New "iron work"

86 : Anti termite treatment

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel

2.1.3 : Supplying and filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

5.1 Randam Rubble Masonry Work in Cement mortor1:5 using HBG Stone for foundation & Basement (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B and Superstructure ) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM²

8.1.1.1 : Standardised concrete Mix M20 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.2 : Supply and fixing Solid UPVC door shutter with frame

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand including plasticizer) for inner plastering

38.7 : Plastic Emulsion PAINT including primer for walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

56.3.2 : S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - G.F. (using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with "P" or "S" TRAP (using crushed stone sand)

Annexure II A1 : Drilling of 40mm Dia Holes in Rock portion for Strengthening the Foundation of Building etc Complete.

A2: Grouting for Drilling of 40mm Dia Holes in Rock portion for Strengthening the Foundation of Building etc Complete.

A3: Supplying and Erecting Electrically Operated Type (exceeding 12 sqm. Area) Rolling Shutter with ISI make of approved size and section using 18 GI sheet with ISI monogram with necessary side channel, hood cover with locking arrangements etc.,complete.. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc

A4: UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle.

A5 :Supplying,Fabrication & fixing of steel window Grill Size of 1.52x1.52m using 16mm dia square (or) Round bar for window grid including are coat of metal primer with fixing etc.,complete.

A6: Supplying,Fabrication & fixing of steel Ventilator Size of 1.52x0.60m, Using 4mm thick pinnet glass 35x35x6mm including are coat of metal primer with fixing etc.,complete.

A7: Supplying and Fabrication of M.S Truss making of ISI 75x75x6mm Bottom,Top Chord Angle -2Nos,Web (brace) Angle making of ISI 50x50x6mm,Nal Plates are 6mm thick,Bed Plates are 10mm thick,Bed bolts are 25mm dia with nuts,cleats angle are 75x75x6mm with one coat of metal primer and fixing charges,lead and convenyence charges etc., complete

A8: Supplying ,Fabrication and fixing of C-Type Channel Purlins of ISI 125x65x5.2mm thick with one coat of metal primer and fixing charges,lead and convenyence charges etc., complete.

A9: Supplying and fixing of ISI make Asbestos Cement Fully Corrugated sheet of 6mm thick including the cost of Bolt, Nut and Washer etc., complete.

A10: Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable STAIRCASE LIGHT POINT (Open wiring)

A11: Special ceiling Plastering and finishing the exposed surface of all R.C.C items of works such as slabs, beams staircase waist slab, landing etc.,With CM 1:3,12mm thick including hacking the surfaces, scaffolding and curing etc.,complete. (using crushed stone)

A12: External Plastering with c.m 1:5,20mm thick in all wall,floor including scaffolding and curing etc.,complete. (using crushed stone)

A13: Flooring and Floor Finishing with Granolythic finish using 6mm and 10mm HBG stone Jelly with 1:2:4 mix using necessary slope,Ramming and curing etc.,complete,(using crushed stone)

A14:Dadooing Wall tiles using Size of 300x600x10mm used as Bath,Toilet room wall with CM.1:3 simultaneously pointing with same colour cement and cleaning etc., complete. (using crushed stone)

A15:Internal Water pipe line, External water pipe line,Waste Water pipe line,Sewage pipe line for indian type and western type toilet basin each 1 No including the cost of all labour and all material etc.,Complete.

A16:Waste water line 1.00m Height from Ground level and Horizontal Distance of 10.00m length, Sewer line vertical Height of 1.00m and Horizontal distance of 10.00m length flow go to septic tank and drainage etc., complete.

A17: Supply and Fixing of Urinary Basin with all Fittings incuding cost of all materials labour etc complete.

A18: Drilling of 6" dia (150mm) vertical bore of hard rock areas to any required depth as directed by the departmental officers rate is inclusive of labou charges for inserting casing pipe assembling the pipe if necessary and also transporting charges for the rig and supporting vehicle from one place to another etc., complete complying with standard sepcifications. a)Upto 150m below Ground level

b) From 151 to 180m

c) From 180m to 210m

d) From 210m to 240m

e) From 241m to 250m

A19: Supplying Suitable Special Blue Slotted Pipes for bore wells size casing pipe for 7" (160mm dia) borewell (6kg/sq.cm) of best quality with ISI mark with necessary PVC coupling with socket end, The PVC should got approved by the departmental officers before execution.

A20: Supplying Suitable PVC End Cap (6kg/sqcm) of best for casting pipe, of 6" dia borewell quality with ISI mark the PVC should got approved by the departmental officers before execution.

A21: Supplying and delivery of 32mm dia HDPE pipe heavy duty and best quality having ISI mark including laying in the borehole and tying with copper wire etc., complete complying with standard sepcification and as directed by the departmental officers.

A23: Supplying and fixing of electronic panel board with all necessary internal wiring, indicator, dry run preventer 3 pole MCB, DOL starter, electrical circuit voltmeter, Ammeter, on, off, buttons etc, complete the box should be Painted.

A24: Supplying and fixing of water proof 3 core 2.5 sq.m flat P.V.C insulated copper cable for submersible pumpset in the bore well including fixing and fying with copper wire and clamping water pipe etc., complete as directed by the departmental officers.

A25: Supply and fixing of 20mm dia Nylon rope for submersible motor of approved quality etc., complete as directed by the departmental officers.

SAKTHI AND CO (BID ID -1271061)