Repair and paiting polishing to all type of furniture under GE (N) Ahmednagar

Amount

REPAIRS TO TABLE OFFICE CLERK STEEL : (FD-84,34,1004)

(a) Removing of userviceable drawer of table office clerk and providing new drawer made out of MS sheet 1mm thick and applying two coats of synthetic enamel paint over a coat of red oxide primer on new drawer including one coat of paint & all balanced steel surface to match the shade by sprayer and duly welded and rectifying the automatic locking system to drawer as per drg and all as specified. Make of piant shall be Apcolite by Asian Paints. Colour shade of paint shall be decided by Engineer -in- chage

(b) Removing of unserviceable drawer lock and providing new brass lock with stainless steel duplicate key for table office clerk .

(c) Providing new mild steel square tube 25 x 25mm square 18 gauge frame wherever necessary including welding.

(d) Removing unserviceable table top and providing new top of size 1200mm x 600mm made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-charge with teak wood beading all round the table top etc complete all as specified and directed by Engineer-in-Charge

REPAIRS TO TABLE OFFICE OFFICER STEEL : (FD-84,1003, 1002)

(a) Removing of userviceable drawer of table office officer and providing new drawer made out of MS sheet 1mm thick and applying two coats of synthetic enamel paint over a coat of red oxide primer on new drawer including one coat of synthetic enamel paint all balance steel surface to match the shade by sprayer and duly welded and rectifying the automatic locking system of drawer as per drg and all as specified. . Colour shade of paint shall be decided by Engineer -in- charge.

(b) Removing the old unserviceable lock of table officer (Steel) and replacing the same with new one with duplicate keys as per drawing and etc complete all as specified and directed by Engineer-in-Charge

(c) Removing the existing unserviceable top of table office officer, supply and fix new top made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-charge with teak wood beading all round the table top etc complete all as specified and directed by Engineer-in-Charge

REPAIRS TO TABLE 3' X 2' STEEL WITHOUT DRAWER : (FD-1007)

(a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-charge with teak wood beading all round the table top complete all as directed. Applying one coat of synthetic enamel paint over a coat of red oxied primer by sprayer paint . Colour as decided by Engineer-in-Charge

REPAIRS TO TABLE 3' X 2' STEEL WITH DRAWER : (FD-1008)

(a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminated MDF board of colour as decided by Engineer -in-charge with teak wood beading all round the table top etc complete all as specified and directed by Engineer-in-Charge

(b) Removing of userviceable drawer of table 3'X2' with drawer and providing new drawer made out of MS sheet 1mm thick and applying two coats of synthetic enamel paint over a coat of red oxide primer on new drawer including one coat of synthetic enamel paint on all balance steel surface to match the shade by sprayer and duly welded and rectifying the automatic locking system to drawer as per drg and all as specified. Colour shade of paint shall be decided by Engineer -in- charge

REPAIRS TO TABLE 3' X3' STEEL WITH OUT DRAWER : FD-1009

(a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-chrg with teak wood beading all round the table top complete all as directed. Applying one coat of synthetic enamel paint over a coat of red oxied primer by sprayer paint . Colour as decided by Engineer-in-Charge.

REPARIS TO VARIOUS TYPES OF CHAIRS REVOLVING : TP

(a) Removing the existing unserviceable foam and tapestry of seat, supply and fix new 32 density foam cushion 4" with tapestry as approved by Engineer - in- chrge.

(b) All as per Items No 18 (a) above but back

(c) Supply and fix new handle as per drawing.

(d) Removing the existing unserviceable Adjustable Hyadrolic system of chair revolving supply and fix new Hyadrolic system best quality as approved by Engineer-in-charge.

(e) Removing the existing unserviceable coaster wheel of chair revolving supply and fix new coaster wheel best quality as approved by Engineer-in-charge etc complete all as specified and directed by Engineer-in-Charge

REPAIRS TO STOOL REVOLVING STEEL ADJ 510MM/610MM FD-119

(a) Removing the existing userviceable foam and tapestry of seat supply and fix new 32 density foam cushion 3" with tapestry as approved by Engineer-in-chrge. Applying one coat of synthetic enamel paint over a coat of red oxied primer by sprayer paint colour as decided by Engineer-in-Charge etc complete all as specified and directed by Engineer

(b) Removing the existing unserviceable coaster wheel of chair revolving supply and fix new coaster wheel best quality as approved by Engineer-in-charge etc complete all as specified and directed by Engineer-in-Charge

REPAIRS TO BOOK CASE STEEL FD-1028 FD-90

(a) Removing the dents, cleaning the old painted surfaces of book case steel by scrubbing and smoothing the surfaces and applying one coat of synthetic enamel pait paint on all internal and exernal surfaces including supply and fix plain glass panes 5mm thick to all doors etc comlete all as specified and directed by Engineer-in-Charge

(b) Removing of existing unserviceable locks from book case steel and providing new locks all as per drg etc complete all as specified and directed by Engineer-in-Charge

REPAIRS TO FORM WITHOUT BACK FD-75,1027

(a) Removing existing unserviceable planks and supply and fix second class hardwod planks of 25mm thick of size 1900 x 255mm thick and shape with apropriate nutbolts as specified and as per drawing. Applying one coat of synthetic enamel paint over a coat of red oxied primer by sprayer paint colour etc complete all as specified and directed by Engineer-in-Charge

REPAIRS TO FORM WITH BACK FD-75,1027

(a) Removing of existing unserviceable planks supply and fix second class hardwood panks of 25mm thick of size 1800 x 255mm and shape as specified & as per drawing.

(b) Removing of existing unserviceable back planks of form with back, supply and fix second class hard wood panlk of 25mm thick of size 1800 x 125mm and shape as specified and as per drawing. Applying one coat of synthetic enamel paint over a coat of red oxied primer by sprayer paint colour as decided by Engineer-in-Charge

WELDING TO STEEL FURNITURE FD-67, 1031, 1032 ,84 (M), 1003, 1004,75(M), 258, 77(M), 120, 359, 256,1027 44, 81, 1012,

(a) Meterial & labour for spot welding of steel items of broken joints etc. not exceeding 2.5cm in length and thickness 6mm including scraping preparing surfaces of welded protion by grinding and buffing to make fit for painting and applying two coats of synthetic enamel paint over a coat of red oxide on welded portion only etc complete all as specified and directed by Engineer-in-Charge

REPAIRS TO BOOK SHELF OPEN SMALL STEEL : (FD-69/TP)

(a) Removing the dents cleaning the old painted surfaces of book shelf open small steel by scrubbing and smoothing the surfaces and applying one coat of one coat of sysnthetic enamel paint on all internal and external surfaces etc complerte all as specified and directed by Engineer-in-Charge

(b) Removing unserviceable shelves of book shelf open small steel and providing new shelf made out of 1mm thick mild steel black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by spraying and providing necessary cleats and bolts etc.

REPAIRS TO BOOK SHELF OPEN LARGE STEEL (FD-69,TP)

(a) Removing the dents, cleaning the old painted surfaces of book shelf open large steel by scrubbing and smoothing the surfaces and applying one coat of synthetic enamel paint on o all internal and external surfaces etc complete all as specified and directed by Engineer-in-Charge

(b) Removing unserviceable shelves of book shelf open large steel and prividing new shelf made out of 1mm thick mild steel black sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer by speraing and providing necessay cleats and bolts etc.

REPAIRS TO STEEL CHAIRS FD-258, 256, 359, 19, 75

(a) Removing the existing wornout nylone newar from chair varandah and reweaving the same with new standard 50mm wide nylon newar white as per drawing etc complete all as specified and directed by Engineer-in-Charge

(b) Removing of existing wornout unserviceable cane of chair varandah and recanning with new standard 4mm wide white/ cream plastic/ nylon cane of semi circular type in mat pattern etc complete all as specified and directed. by Engineer-in-Charge Including appplying one coat of synthetic enamel paint on all steel surface of chair

(c) Removing existing unserviceable seat of chair CB steel w/arm, supply and fix new seat made out of second class hard wood duly canned as per godrej pattern & polished in Black shade glossy finish with suitable screw&nut etc complete all as specified and directed by Engineer-in-Charge

(d) All as per item No 45 (c) here in before but back of chair CB steel

(e) All as per item No 45 (c) her in before but seat for chair CB steel with arm

(f) All as per item No 45 (c) here in before but back for chair CB steel without arm.

(g) All as per item No 45 (c) here in before but arm rest with suitable screw.

(h) Supply and fix plastic shoe for chair CB steel with suitable screw

(j) Supply and fix tubular shoe superior quality for chair varandah

BED HARD STEEL FD/ E6 / MAP /08,08 (R )

(a) Removing the existing unserviceable top, supply and fix new top made out of 12mm thick commercial plywood BWR gd with ISI mark (Make: Archidply/ Centureyply/ Greenply with suitable screws as directed by Engineer -in-charge. Applying one coat of synthetic enamel paint over a coat of red oxied primer by sprayer paint Colour etc complete all as specified and directed by Engineer-in-Charge

ALMIRAH LARGE/MEDIUM STEEL FD-67, 243, 1031 to 1034

(a) Removing the existing unserviceable shelves of steel almirah large, medium & providing shelves made with mild steel sheet, 1 mm thick, cut to size, shape etc.dully welded and applying two coats of synthetic enamel paint over a coat of red oxied primer by sprayer complete. including one coat of synthetic enamel paint on all balance steel surface to match the colour shade as decided by Engineer-in-charge etc complete all as specified and directed by Engineer-in-Charge

(b) Removing the existing unserviceable legs of steel almirah large, medium & providing legs made with mild steel sheet, 1 mm thick, cut to size, shape etc.dully welded and applying two coats of synthetic enamel paint over a coat of red oxied primer by sprayer complete. Colour shade will be decided by Engineer-in-charge etc complete all as specified and directed by Engineer-in-Charge

(c) Removing the existing unserviceable handle of steel almirah large, medium & providing steel chromium plated handle of size, design as existing etc complete all as specified and directed by Engineer-in-Charge

(d) Removing the UNSV complete Mechanisam of consild Godrej pattern lock with handle from Almirah Large/med steel supply and fix new concealed Godrej pattern lock with handle. etc complete all as specified and directed by Engineer-in-Charge

(e) Removing the UNSV threeway locking system from Almirah Large/med steel supply and fix new three way locking system with handle etc complete all as specified and directed by Engineer-in-Charge

TABLE DINING OR (FD-78,165)

(a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-charge with 4mm thick teak wood beading all round the table top. Applying one coat of synthetic paint on all exposed steel surface etc complete all as specified and directed by Engineer-in-Charge

CHAIR VARADAH MAP(FD/E6/MAP/11)

(a) Removing the old seat of chair varandah MAP & supplying and fixing new seat as per existing pattern,including painting to steel surface of chair.etc complete all as specified and directed by Engineer-in-Charge

TEAPOY VARANDAH FD-383,255, FD/E6/MAP/17

(a) Removing the existing unserviceable top, supply and fix new top made out of 18mm thick pre-laminate MDF board of colour as decided by Engineer -in-chrg with 4mm thick teak wood beading all round the table top complete all as directed. Applying one coat of synthetic paint on all exposed steel surface etc complete all as specified and directed by Engineer-in-Charge

CHAIR SCHOOL WITH HANDBOARD FD/E6/MAP/05

(a) Removing the existing unserviceable handboard from chair school and supply and fixing new Handboard made of 18/19 mm thick prelaminated MDF board colour as decided by Engr-in-chrg with 4mm thick teakwood beading ali around the top and including welding and all connecting work. Applying one coat of synthetic paint on all exposed steel surface etc complete all as specified and directed by Engineer-in-Charge

(b) Removing the existing unserviceable plastic sheet from chair school and supply and fix new plastic sheet of best qaulity with ISI mark as approved by Engineer-in-Charge etc complete all as specified and directed by Engineer-in-Charge

REPARIS OF CHAIR WRITING MAP FD/E6/MAP/12

(a) Removing the existing unserviceable foam and tapestry of seat, supply and fix new 32 density foam cushion 4" with tapestry as approved by Engineer - in- chrge.

(b) All as per Sl Items No 70 (a) (here-in-before) but back

(c) Supply and fix new handle as per drawing. Applying one coat of synthetic paint on all exposed steel surface.etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 25,760.00 shall be deducted from BOQ on account of schedule of credit

Mahesh Traders

Madina Traders

SHUBH ASHISH ENTERPRISES

JAI BHARAT ENTERPRISES