9-2(5)/2023-24-Engg.(HRDC)

Amount

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:

(a) 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete.

Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (Sampian colour anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :

Providing and fixing aluminium tower bolts, ISI marked, anodised (colour anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Providing and fixing, in position concealed aluminium tube size 25x50mm for wall paneling using board of required thickness fixed on the tube, placed all both way intermidiate section @ 610 mm C/C. Perimeter tube is fixed on the floor, wall and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the tube with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish.

Multipurpose cement board reinforced with suitable fibre cement screw.

8 mm thick cement fibre board, Type - B, Category - III as per IS : 14862 : 2000

Providing and Fixing 15 mm thick tegular edged eco friendly light weight miniral fiber false ceiling tiles of Armstrong RH-99 tegular Dune or equivalent approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.

Providing and fixing of average 12 mm thick gypsum board false ceiling at all height including providing and fixing of frame work made of galvanized sections, power pressed from M.S. sheets and galvanized with zinc coating (both side inclusive) and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges, at maiximum 600x1200 mm centre to centre or all framing are madeup as per required location of the light fitting, AC and any other ceiling items, all flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification, making provision of light fittings and diffusers cutouts all complete as per direction of the Engineer in Charge. Make should be Gyproc, India Gypsum, USG boral and Armstrong. (Note : All patta will be measured in Sqm).

15 mm cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the terrace / chajja and making light both way groves as per direction of EIC.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Floor polishing on masonry / concrete/ stone floors and skirting with wax polish of approved brand and manufacture.

Removing dry or oil bound distemper, emulsion, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Two coats or more

Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :

Old work (one or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

[a] One or more coats on old work

French spirit polishing including repairing of all holes, cutouts, making smooth and match simiar to door :

[a] One or more coats on old work

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.

With cement mortar 1:4 (1 cement : 4 fine sand)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineerin- charge.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

In cement mortar

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Replacement of double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.

With stainless steel cover plate minimum 1.25 mm thickness

Replacement of Brass 100mm mortice lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.

Providing and fixing bright / matt finished stainless steel straight tubular D type handle, average outer dia 25mm and length 325 mm of approved. Fixed with SS screws etc. complete as per direction of Engineer-in-charge.

Providing and installation of Vertical blind of widh 100 mm Translucent Febric and approved pattern / shade of make Vista/ MAC / DS or equivalent all complete as per direction of Engineer-in-Charge.

Providing and fixing 1.5mm thick LG make or equivalent (approved colour and shade) homogeneous Polyvinyl chloride sheet in flooring and skirting in approved pattern on a smooth and damp proof base using rubber based adhesives of approved quality and manufcturer like Dunlop S-758, Fevicole SR-998 or equivalent including rolling with light wooden roller weighing about 5 kg all complete as directied by Engineer-in-Charge.

Providing and fixing 75 mm diameter and 45 cm long havey duty PVC pipe rain water spout, including cutting hole in the existing terrace RCC / brick parapet wall and repair both side with cement mortar 1:4 (1 cement : 3 course sand) all complete as required.

Making provision for fixing of LED light fitting of size 1200x300 mm in corridor ceiling, the exiting original opening is avilable average 1200x250 mm, the existing width of opening 250 mm increase upto 300 mm by cutting of 25 mm both side plater and RCC (if required) up to depth of LED light fitting and repair with POP and making smoth as required.

Removing of old mortic door lock from the existing door and lock space closed by the ply as required thickness and top outside cover with the 6mm thick teak wood lipping and also making door smooth in the moving all complete as required.

Providing 65mm Brass finish 3 key round padlock make Godrej/Harrison / Link as required.

Providing and making of steel ingrave key chain average size 40x80mm with CSIR logo and room numbers all complete as per direction of EIC.

Providing and fixing of SS name plate 1 mm thick of size 6"x12" with four standered studs including screws etc. all complete as per direction of EIC.

Removing and re- fixing of old existing SS name plate with four standered studs including screws etc. all complete as per direction of EIC.

Providing and fixing of ceiling hanging 5mm thick Acrelic signe board with both side stiksrs of size 9"x18" and hanging with chain / flexible rod etc. all complete as per direction of EIC.

Providing provision of reactangular cutting for door and window in existing wooden partition wall including cutting of partition with fram of size upto 2.0 Sqm all complete as per direction of EIC.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length all complete as per direction of EIC.

Second class teak wood

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.

Kiln seasoned and chemically treated hollock wood

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.

1.0 mm thick

Providing & fixing glass panes with wooden moulded beading 25x12mm in doors and windows frames with iron screws, plugs and priming coat on unexposed surface etc. all complete with :

5.5 mm thick glass panes

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and installation of any clour / designer glass film on the existing door and windows of make 3M / Garvare or equivalent all complete as per direction of Engineer-in-Charge.

Fabrication and installation of laminated workstation with 25mm thick ISI marked commercial board and all over cover with approved 1mm thick laminate (as per photograph enclosed), average size of each workstation top 1200x750mm with intermediate partition and back height will be 1200mm. All edge cover with 1.5mm thick end rounded PVC tape. Workstation intermediate sides and front portion laminated with decoretive lamination. Making minimum 2 holes in table topwith minimum dia 75mm and cover with plastic openable cover. Providing and fixing of electrical points with PVC / GI 08 module box , base plate, cover with 5 amp. 2 swithch and 3 shockets and wiring should be 2.5 sqmm wire with PVC conduite. Also making one fixed lockable laminated cabinate with 19mm thick board of average outer size 45x60cm below the table including three drawers with stainless steel telescopic channel including all required fittings like lock and handles etc. and making one moveable laminated foot rest all complete as per direction Engineer-in-Charge.

Supply of mid back mesh revolving chair with armrest the seat assembly shall be hot-pressed plywood / plastic fram and shall be upholstered with fabric upholstery covers and moulded Polyurethane foam. The dimensions of seat shall be average 47.0 cm. (W) x 48.0 cm. (D). The back asembly shall be made of powder coated tubular frame with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. The dimensions of back shall be average 46.5 cm (W) x 60.5 cm (H). The one-piece armrests shall be injection moulded from black Co-polymer Polypropylene. Overall average dimensions of Chair shall be Seat Height - 46.5cm, Height - 93.5cm, Width & Depth of Chair as measured from pedestal -Width-76.3 cm and Depth-76.3 cm and adjustable the Up/Dn mechanism lift provision etc. all complete as per direction of EIC.

Providning and installing mobile storage compactor consists of storage units (average size 915 mm W x 381mm D x 1980mm H) – fixed or movable – bolted to Undercarriage which rolls onto the channels, which, are firmly embedded to the ground. Base fram will be made out of 10 gauge thick HR sheet conforming to IS: 513 Gr.D. Each body block (SS/SL/TM) building consists of 1 Main unit. Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body units are bolted to undercarriage. Height from ground is 2080 mm (1980 body + 65 undercarriage + 35 channel system). The bodies including shelves are given antirust surface treatment & final finish consists of epoxy polyester powder coating of approved color & shade. Shelves made of 20 gauge CRC steel conforming to IS: 513 Gr.D or DD. Its max load bearing capacity is 60 Kg uniformly distributed per shelf for P1 Type of Configuration. Shelves are mounted on support brackets & shelf level can be adjusted at approx. 25.4 pitches. There are 4 adjustable shelves per body giving 5 loading levels. Push-Pull Configuration (TYPE-P1/TYPE-P2): Movement of units achieved by pushing or pulling Chrome plated ‘C’ handle fitted onto 1.6 mm thk plate (mounted on each double & single movable units) & rigidly fixed at suitable height on body side. Each movable undercarriage has 4 nos. of antifriction ball bearings for rolling onto channels & 4 nos. of antifriction ball bearings for guiding between channels & ‘J’ section. A Centralized locking arrangement is provided through Locking Stiffener mounted onto back of Single Last unit so that it gets locked on channels when all the units are brought together. The Recess handle lock is of Godrej or equivalent make & placed at suitable height all complete as per direction of EIC. Make : Sky Storage/ Ganpati/Castle

(a) Single Static Unit - Single Bay Push / Pull type

(b) Twin Mobile Unit - Single Bay Push / Pull type

(c ) Single Last Unit - Single Bay Push / Pull type

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :

Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.

Cement mortar 1:4 (1 cement :4 coarse sand)

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

Shifting of Cash Chest an other place including dismentaling of cash chest, its foundation madeup by brick and concret, shifting cash chest, and re-fixing of the cash chest an other place. (Note : concrete, brick work and plaster shall be paid in extra / consern items).

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Of area 3 sq. metres and below

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:

Profile B

Fixing with adjustable lugs with split end tail to each jamb

Re-fixing of door shutter with providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Kota stone slab flooring and skirting over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :

25 mm thick

Shifting of cash chest MS door and window gril an other room including dismentaling / removing of door and gril, re-fixing of same door and grill with required mofification including cuttting of wall, cement concret and finishing of wall. Making shutter smooth and locking all complete as per direction of EIC.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

(a) Group C

Wiring for light/ power plug with 2X6 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 6 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X6 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 6 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(c )2 X 4 sq. mm + 1 X 4 sq. mm earth wire

(d) 2 X 16 sq. mm + 1 X 6 sq. mm earth wire

(e ) 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

(a) 8 way (4 + 24), Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

(a) Single pole

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying of metal body heavy duty 16 A Power strip with 6 pin 5/6 & 15/16 A (03 nos.) socket, control with 15 A (01 no.) switch and minimum 3.5 mtrs extension cord/ cable with 15 A power top all complete as per directio of EIC.

Supplying insttalation testing commisioning of following electrical LED fitting in grid with the help of hook chain etc. complete as per Engineer incharge requirment.

(a) LED recess Panel white 6500K light 30 watt or above of size 600x600mm, operating voltage 230/250 V, 50Hz Make : Philips/Havells/Wipro

(b) LED recess panel white 6500K light 30 watt or above of size 1200x300mm, operating voltage 230/250 V, 50Hz Make : Philips/Havells/Wipro

Supply,Installation, testing and commissioning of ceiling fan 1400mm sweep High Speed, 100% copper motor, double ball bearing, upto 100 Watt Crompton Greaves/ Havells / Usha/Bajaj including wiring the down rods of standard length (rod upto 60 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, as required dash fastner etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of cable

Supply and fixing of following telephone / internet I/O Box and connections etc.:

Telephone I/O Box with face plate, gang box and 4 mtrs telephone cable with both side I/O connector..

Internet CAT 6 LAN I/O Box with face plate, gang box and 4 mtrs CAT 6 LAN cable with both side I/O connector.

S.I.T.C. of following capacity split type Air conditioners (inverter series) with eco friendly gas, Copper coil, BEE 5 star rating with all accessories including MS stand, 3 mtrs standard copper pipe with insulation, electrical 4 core FRLS copper wire and drain pipe given by manufacturer. (Make should be Daikin/ Hitechi / Carrier ).

(a) 1.5 TR capacity

(b) 2.0 TR capacity

Supply and fixing of Automatic following capacity 140-280V Copper Digital Voltage stabilizer for split Air- Conditioner with TDR of approved brand Blue bird / Sky line / V-gaurd / Microtech or equivalent all complete as required.

Extra for providing and fixing of refrigerent soft copper pipping of split AC laid between indoor and outdoor units as per site requirement and insulated with class "O" fire retardant sleeve type elastomeric nitrite rubber insulation the item also includes copper electrical flexible cable of appropriate size , aluminium foile membrane shall be applied to provide resistance against brekdown due to UV rediation for exposed portion of the rubber insulation with nitrogen testing including threded PVC drain threaded pipe. It sall be in total clamping manner on wall and false ceiling and the distance between two clamp shall be less than 1 mtr. The diameter / gauge of the refrigerant pipe shall be as per the specification or as per site requirement. The above item include the cost of three core flexible electrical cable as per recomended by the Eingineer-in-Charge.

Dismentling of underground aluminium wire in steel conduit including stacking of material with in 50 meters lead as directed by Engineer-in-charge.

Dismentling of DB box with MCB and switch box with switch and shocket including repairing of dismental space with brick and mortar and stacking of material with in 50 meters lead as directed by Engineer-in-charge.

Dismentling of old flourocent tube light fixtures and fans etc. including stacking of material with in 50 meters lead as directed by Engineer-in-charge.

Desmentling of Fan Coil Unit ( FCU) installed in the each rooms in office building including cutting of the connected pipes average size upto 75 mm and block the pipe with cement concrete , stacking of back buy items and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :

Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.

Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.

Supplying & laying of 2 x 1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying & laying of 3 x 1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying, installation, testing & commissioning sector panel suitable for 12 zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.

Buy back of following electrical and civil items

(a) Old Ceiling fan Size-56"

(b) Old flourocent tube light fixturs Size- 4'x1'

(c ) FCU 1.5 / 2 Tone with copper coil and motor

(d) Aluminium wire

( e ) MCB up to 32 A

(f) Smok diductor / response indicator

(g) Hooter

(h) Sector pannel of fire alarm

(i) Wooden shutter and frams

(j) MS FCU Jali /DB box/switch & sockets / RCC bars /door locks/handles/ MS windows/ GI Duct/false ceiling grid, channel and similar items scraps etc.

(k) Vertical blind channel length more then 600mm

(l) Vertical blind channel length less then 600mm

Hashim Hussain And Sons (BID ID -799320)