External Electrification work for Museum, Gandhi Bhawan, ABIC Buildings at CCS HAU, Hisar (Pdg. Transformers, Cabling, DG set etc.)

Amount

MCCB :-S/E of moulded case circuit breaker on wall or on existing pedestal i/c bonding to earth and necessary connections :-{HSR 31.12 (c ) (ii)} (ii) 100Amp to 220 amp 415V 10 KA 3 phase.

(iii) 250amp 415v 35ka 3 phase {HSR 31.12 (c ) ( iii)}

(iv) 300amp to 400amp 415V 35KA 3 phase {HSR 31.12 (c ) (iv)}

Earthing:- (i) Earthing with tinned copper earth plate 600x600x3mm thick including accessories and pdg. masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt) {HSR 31.22 (i)}

(v) Extra for charcoal or coke and salt for GI / copper plate earth electrode. {HSR 31.22 (v)}

(x) Pdg. and fixing 25x5mm copper strip in 40mm dia GI pipe from earth electrode as required. {HSR 31.22 (x)}

(xiv) Pdg. and fixing 25x5mm copper strip on surface or in recess for connections etc. as required.{HSR 31.22 (xiv)}

Under Ground Cables :- S/E of underground cables 1 meter below ground cable with sand and brick including neceesary connections, digging and refilling of trenches :- {HSR 31.25 (xxix)} (xxix) 95 Sqmm 3.5 core (armoured)

(xxxiv) 300sqmm 3.5 core ( armoured ) {HSR 31.25 (xxxiv)}

(xxxv) 400sqmm 3.5 core ( armoured ) {HSR 31.25 (xxxv)}

(xxi) 185sqmm 3.5 Core Cable {HSR 31.25 (xxi}

Under Ground Cables :- S/E of underground cables loose in existing pipe or trenches complete with necessary connections:- {HSR 31.26 (xxix)} (xxix) 95 Sqmm 3.5 core (armoured)

(xxi) 185sqmm 3.5 Core Cable {HSR 31.26 (xxi}

(xxxiv) 300sqmm 3.5 core ( armoured ) {HSR 31.26 (xxxiv)}

(xxxv) 400sqmm 3.5 core ( armoured ) {HSR 31.26 (xxxv)}

Glands S/E of suitable compression type brass cable glands for U/G :- {HSR 31.28 (iv)} (iv) 70sqmm to 95sqmm 3 to 3.5 Core

(v) 120sqmm to 185sqmm 3 to 3.5 core {HSR 31.28 (v)}

(vii) 300 sqmm to 400sqmm 3 to 3.5 core {HSR 31.28 (vii)}

(ix) S/E aluminium lugs heavy duty i/c crimpng etc. upto the entire satisfaction of the Engineer-In-Charge of the work. {HSR 31.35 (ix) (i)} (i ) 95 sqmm

(k)150sqmm {HSR 31.35 (ix) (k)}

(l) 185sqmm {HSR 31.35 (ix) (l)}

(n) 300sqmm {HSR 31.35 (ix) (n)}

(o) 400sqmm {HSR 31.35 (ix) (o)}

SITC of wall / free floor mounting dust & vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3 mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zine/Red oxide primer followed by 2 coats of powder coating in grey or required shade after rising. The panel having PU/Neopreme rubber gasket of not less than 3 mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment/switch wear. Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3 mm thick for separately cable alley to BBC from switch chamber Extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be having boltd type doors with detachable extension type structure. The panel will be complete with control wiring (copper) and fuse protection (Only outer area on all sides shall be measured) (HSR 31.63)

Supplying and fixing of copper bus bar duly tinned by means of SMC/DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect. (HSR 31.64)

S/F of rotary handle for on/off operation of existing MCCB in the LT panel including fixing the same in position with all labout and material required to complete the job in all respect. {HSR 31.66 (i)} (i) Rotary Handle Above 125A

S/E of heavy duty 4 pole on load change over load breaker switch with petty material required to complete the job. {HSR 31.74 (v)} (v) 400amp 4 pole ON Load Changeover Switch

Supply of 320 KVA of Kirloskar Green make KG1-320WS , F Alternator rated at 3 Phase, 415 Volts, 50 Hz; 0.8 p. f. @ 1500 RPM both mounted, Governing Class As per ISO 8528 Part -V G3 , Noise Level < 75 , Fuel Consumption 69 Ltr/Hr at 100% Load , 52.5 Ltr at 75% Load , 37.6 Ltr at 50% Load , Fuel Tank Capacity 850 Ltr , weight of Genset 5910 Kg , Overall dimensions 5180 mm x 2000mm x 2408 mm , 24Volts DC Engine ; DV8TAG , Rated Output 294 KW as per ISO 3046 400HP , No. of Cylinder 8 , Cubic Capacity 15.92 Ltr Bore x stroke 130x150mm , Rated Speed 1500RPM , Aspiration TA , Lube Oil Sump Capacity 44 Ltr , Coolant capacity with radiator 105 Ltr. Alternator insulation class H Ingression Protection IP23 , Alternator efficiency at 100% load 94.3 , and aligned on a common MS base frame complete with MS Fuel Tank, AMF Control Panel Exhaust Silencer, AVM Pads fitted on base frame,1 Nos.12 Volts DC Battery (KIRLOSKAR/TATA GREEN) with Battery Leads, 1st fill of Lube Oil and Coolant, all housed in Sound Proof Acoustic Enclosure.Note :with suitable size solid foundation with reinforcement & CC foundation as per standard specifications and erection with connection of cables , earthings etc and petty material required to complete the job in all respect with satisfaction of EIC. Kirloskar Green /Cummins DG Set shall be as per design & specification of the manufacturer & the cost shall be included in the quoted rates. Kirloskar Green / Sudhir Cummins (NS)

S/E of 1000Amp ACB MDO 4P 415V 50Hz complete with all necessary accessories to complete the JOB L&T Make ABB (NS)

S/E of heavy duty 4 pole on load change over load breaker switch with petty material required to complete the job. (NS) i) 630amp 4 pole ON Load Changeover Switch HPL Make

(a) Supplying, fixing,commissioning and testing of 11KV outdoor type package sub station 650kva consisting of 11/0.433 KV, dry type transformer, MV RMU, LV panel inside 2mm thick GI sheet polyurethene metallic painted with all inter connections, fully type tested as per the IEC-1330 complete in all respect consisting of following items & as per detailed technical specification.The CSS shall be fully internal ARC tested at KEEMA/ CPRI/ ELDA and should be completely factory assembled. NO ASSEMBLY AT SITE SHALL BE PERMITED (b) MV Ring Main Unit11KV, 630A, 21 KA 3 way ring main unit consisting of 2 Nos. 630A load break switches & 1 No manual fixed type vacuum circuit breaker as transformer feeder.all the live parts,VCB modules, isolators, earth switches must be sealed within IP-67 robotically welded single stainless steel tank minimum 2.5mm thick filled with SF6 gas as insulation. VCB shall have series self powered microprocessor based numerical O/C & EF relay (Make of relay : ABB/Seimens/ Schneider) for protection & arrangement for connecting incoming cable & outgoing to primary of transformer, copper bus bars, cable supports, manometer, voltage indications, digital ammeter with suitable protection CT, mechanical indications for breaker ON/OFF/TRIP/SPRING CHARGED etc (c) {The details of (c) may be seen in the Bid document uploaded with this tender (Pdf of bid document)} (NS) Make:-ABB/Seimens/Schneider/Crompton Note:- The complete description and specification/details of this item may be seen in item No. 32 under sub-head Bill of Quantities of bid document uploaded with this tender, before quoting rate of this item the contractor may see the pdf of bid document uploaded with this tender. The job of this items shall be got done as per bid document uploaded.

M/s P.S. Electric