REPAIR ALTERATION TO CONFERENCE HALL AT ZANGLI AND PROVN OF MILITARY TRANSPORT SHED AT CHARKUT UNDER GE 874 EWS

Amount

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre- painted galvalume aluminum zinc coating GI based 0.50mm thick of an colour having tensile strength of 550 Mpa (Ridge) profiled for ridge, fixed with self tapping screws complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for Providing and fixing sunk or raised shaped, 10mm thick plaster of Paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh including Fillets, metal frame work Complete all as specified and directed.

S&F 2nd class sort wood wall panelling of good quality wood planed one side and edges tonged and grooved or rebated other side and dovetailed joints, chamfered both sides fixed to frame with secret nails as in wall panelling 15mm including cornice and beading as required and applying two coats of varnish over a fillet coat of thin varnish after preparation of surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L Vitrified dark shade Double/Ultra charged coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L 25mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) Complete all as specified and directed.

M&L 75mm thick Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as a sub base complete all as specified and directed.

M&L 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) Complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidation Complete all as specified and directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided Complete all as specified and directed.

M&L 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded aggregate) as in plinth protection Complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, columns, fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for preparing new surfaces of steel of any description, over 10cm in width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/Loose soil complete all as specified and directed.

M&L for cement concrete 1:4:8 Type D-2 (40mm Graded aggregate) in foundations, filling and mass concrete Complete all as specified and directed.

M&L brickwork with old size sub class B bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 with old size bricks complete all as specified and directed.

M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft/Loose soil complete all as specified and directed.

M&L for removing excavated material/soil n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point Complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, of any description including necessary scaffolding etc complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 is to be finished even and smooth with water proofing compound (without using extra lime or cement) including necessary scaffolding complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for preparing new plastered surfaces of wall and applying two coats of 1st quality acrylic distemper over primer including 1 mm thick wall care Putty, white or tinted complete all as specified and directed.

Material & Labour for Preparing new plastered/ unplastered surfaces of walls and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including necessary scaffolding complete all as specified and directed.

Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for Complete all as specified and directed.

M&L for reinforced cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate as in beams, cantilevers, bressummers, lintels complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Taking down chowkats or frame with shutter of doors and window, without taking off shutter from the frames area exc 1.5 sqm but not exc 4sqm each complete all as specified and directed.

M&L for 2nd class soft wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M&L for mild steel bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L for treating ends of posts, backs of chowkats, etc., area tarred exc 0.1 sqm but n exc 0.5 sqm treated with tar or coal tar black each including preparation complete all as specified and directed.

M&L for treating small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats, etc., area n exc 0.1 sqm each treated with tar or coal tar black each including preparation complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 20mm graded stone aggregate as bed block to hold fast block and other similar works etc complete all as specified and directed.

S&F 35mm thick, 2nd class soft wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed.

M&L for applying two coats of synthetic enamel on wood (ordinary tint) over one coat of pink primer over 10cm width or girth including preparation of new surface complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F Aluminium handles 150mm long, cast type, anodised complete all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 200mm of extruded section and fixed complete all as specified and directed.

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 250 mm size complete all as specified and directed.

M&L Power Coated aluminium frame for doors, windows, ventilators, openings with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L Power Coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, Power Coated aluminum snap beading screws etc. complete all as specified Complete all as specified and directed.

S&F Sheet glass, 5.5mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane Complete all as specified and directed.

M&L for door closer hydraulically regulated, designation No. 3, universal type, aluminium body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F For 12mm thick plain toughened glass fixed on aluminium frame with glass door handle (IGH-11), glass connector, ICG-1, patch fitting & door closing (IPF-2) device & lock all made of high-grade stainless-steel grade SS-304 (make of fitting install) including erecting, carving complete all as specified and directed.

M&L Preparing new plastered surfaces of wall, made sunk or raised moulding with POP and painting to match the colour of wall over Prime white or tinted including necessary GI wire mesh/wooden frame work complete all as specified and directed.

Refixing of shutter in same opening of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

M&L for surface excavation of any type of soil n. exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out complete all as specified and directed.

M&L excavation in post holes, soft/loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

M&L for cement concrete 1:2:4 Type D2 (40mm Graded aggregate) in foundations, filling and mass concrete complete all as specified and directed

M&L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L 150mm thick cement concrete type D-2,1:4:8 (40mm graded aggregate) as in sub base of floor complete all as specified and directed.

M&L 100mm thick cement concrete type B-2,1:2:4 (40mm graded aggregate) complete all as specified and directed.

M&L preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer complete all as specified and directed.

M&L Cement concrete 1:2:4 Type B1 (20mm Graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed Complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specified and directed.

Taking down DB's including MCB's etc complete all as specified and directed.

Taking down carefully unserviceable sub main wiring of any size/core/type including making good the disturbed surfaces complete all as specified and directed.

M & L for point wiring with PVC insulated unsheathed single core multistranded copper conductor 1.5 sqmm, 1100 volts grade cable, FRLS, drawn through PVC casing caping/ PVC Conduit of suitable size (as per site requirement) including accessories and provision of PVC boxes for mounting switches, switch socket, fan regulator, modular metal flush boxes (metal switch board of any type and size) with modular metal frame plate and white cover for housing switch required on site or as directed by Engineer-in-Charge including one run of PVC insulated unsheathed multistranded copper conductor cable 1.5 sqmm (green colour) earth wire and connected to earth dolly complete all as specified and One light /one fan/one bell point controlled by one switch.

All as per item No 63 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on same board.

All as per item No 63 herein before but for one socket outlet 5 pins 5 amps controlled by one switch on independent board.

All as per item No 63 herein before but wiring with 2.5 sqmm copper wire (FRLS) and 2.5 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

All as per item No 63 herein before but wiring with 4.0 sqmm copper wire (FRLS) and 4.0 sqmm earth wire for socket outlet 6 pin 15 amps on independent board.

S&F Modular switch 1way 6A, 1 module complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F Modular switch 1 way 16A, 1 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and directed.

S&F single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 6-32 amp complete all as specified and directed.

Supply & fixing smart managed switches series auto switch off and on light through a smart card for 28/52 port configuration with 6 SFP ports for fibre connectivity, supports POE (up to 30 Watt per port) for flexible network deployments auto budgeting functions for flexible power managements complete all as specified and directed.

Supply & fixing motion sensor switch 360 Degree occupancy slim PIR - presence room ceiling mount -230 V energy saving motion sensor white range of 7 mtr complete all as specified and directed.

Supply and fixing in replacement Smart strip light is a combination of both tenable while LED's and RGB LEDs give a perfect blend of colours for indirect lightings needs available in modules sizes that perfect mix functional and mood lighting using smart phone or voice enable device & music sync feature which the light to change colours in sync with music playing near smartphone device fixed to suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in replacement circular/Square (as per site Requirement) shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free motion sensor light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

M&L for shifting and refixing split type air conditioner of capacity 1.5/2 ton and Indoor/Outdoor unit, copper pipe & insulation electrical fitting, refilling of gas R-22/ R-410/R32/ R134a complete all as specified and directed.

M&L for shifting of Solar 300AH VRLA-Gel battery Bank, 50 KVA 3 phase, Grid tied Hybrid Inverter MNRE upto 50 mtr of existing installation complete all as specified and directed.

M & L for sub main wiring with two single core 6 sqmm PVC insulated and unsheathed 1100 volts grade, stranded copper conductor FRLS ISI marked drawn into & including medium grade PVC conduit/ casing caping 25 mm dia with all fittings and accessories and one continuous run of 6 sqmm copper conductor PVC insulated (green colour) as earth wire fixed into PVC casing / conduit (not less than 25mm outer dia) with all fittings and accessories fixed concealed/ surface including taking down old unserviceable submain wiring and making good disturbed surface complete all as specified and directed.

S&F sheet metal enclosure for DBs (Double door type) when MCBs to be used single pole and neutral 8 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

S&F sheet metal enclosure for DBs (single door type) when MCBs to be used single pole and neutral 12 way including blanking plate as required with 200 amps rated busbar 240V fixed sunk/flush to the wall or niche complete all as specified and directed.

MCB single pole & neutral 40 to 63 Amps 230 Volts 'C' series, 10 KA complete all as specified and directed.

S&F MCB's single pole 240 volts 6 to 32Amps 10 KA 'C' series, all as specified and as directed by Engr -in-Charge.

S & F in repair distribution boards VTPN, 8 way, double door 415 volts 50 Hz, AC including fixing on suitable rectangular block complete all as specified and directed.

S & F in repair MCCB ,100 Amp, 4 Pole breaking capacity 16KA, 415 Volt, 50 Hz with sheet metal enclosure complete all and specified and directed.

M&L for earthing complete with copper plate electrode 600x600x3.15mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to copper strip 20 x3 mm (up to 7.5 m in length from earth plate ) by means of bolts and nuts check nuts and washers of galvanized iron or steel all as specified and shown in electrical plate no 3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm long reinforcement, watering funnel, 40 mm dia medium grade for protection of earth electrode 20 mm dia for watering all as specified and directed and tested on completion.

M&L for earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

Supply and fix in repairs rigid non-metallic PVC conduit of size 25 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc for TV and telephone cable with all cutting and finishing work complete all as specified and directed.

Supply and fixing in repairs Junction boxes (1 to 4 way) of dia 25 mm complete all as specified and directed.

S & F in repairs Telephone socket (RJ-11) complete all as specified and directed.

S & F in repairs TV socket complete all as specified and directed.

M&L in repairs Coaxial cable CCA copper cotted alloy 100M GHz 75 Ohms direct TV dish cable TV , Antenna, Satellite , DVR & Amplifiers complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sqmm 3.5 core

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sqmm 3.5 core

Sand cushioning to underground cables 8 cm below the cable before laying and 15 cm above the cable after laying, complete all as specified in clause 19.75 of SSR Part-I, complete all as specified. Note:- Punned thickness of sand shall be measured.

Material and labour for burnt Sub class 'B' bricks laid dry, flat, width wise along the length of cable in trenches after sand cushioning for protection of under ground cable complete all as specified and directed.

M/S MUNEER AHMAD WANI CONSTRUCTIONS (BID ID -3336938)

M/S MANZOORAHMAD LONE (BID ID -3344470)

GH MOHD SHAH AND CO (BID ID -3341400)

M/S BASHIR AND SONS (BID ID -3336814)

M/S SAJAA CONSTRUCTION COMAPNY (BID ID -3336460)

AAKASH CONTRACTORS (BID ID -3334720)

Bidder Name

M/S BASHIR AND SONS

M/S SAJAA CONSTRUCTION COMAPNY

GH MOHD SHAH AND CO

M/S MANZOORAHMAD LONE

M/S AK CONSTRUCTION

AAKASH CONTRACTORS

M/S MUNEER AHMAD WANI CONSTRUCTIONS