Item no. 1

Samsaan Ghat Excavation in foundation in ordinary soil (loam,clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or plinth from the foundation trenches as per S.I. No. 251 (a).

Plain Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proprtion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work including all type of taxes, octroi, tolls, cess but excluding cost of GST and as per direction of ENC as per SOR SI No 281.

Reinforcement cement concrete (1:1.5:3) in open foundation & Tie beam including line,level,shuttering ,curing-15 days complete as per drawing and Technical Specifications RCC Grade M-20 with Reinforcement including all type of taxes, octroi, tolls, cess but excluding cost of GST and as per direction of ENC as per SOR SI No 283 (a)

Supplying, fitting and placing with MS bar reinforcement (Fe 415) in substructure complete as per drawings and Technical Specification Clause 1002, 1005, 1010 & 1202 including bending for proper and necessary completion of the work and including supply of steel and wastages, bends, hook and authorised overlapping shall be measured as per direction of Engineer-in-Charge.

M-150 class Brick Work in 1:4 cement & Coarse sand 2.20 F.M. mortar in foundation and upto plinth level including supply of all materials, labour and T&P etc. requried for proper completion of the work as per SI No 305(a).

12 mm thick plaster with cement and fine sand of 1.25 fineness modules mortar in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work as per SI No 582.

Reinforcement cement concrete (1:1.5:3) in open col .& beam,slab including line,level,steel shuttering frame ,curing-15 days complete as per drawing and Technical Specifications RCC Grade M-20 with Reinforcement including all type of taxes, octroi, tolls, cess but excluding cost of GST and as per direction of ENC as per SOR SI No 283 (a)

Supplying, fitting and placing with MS bar reinforcement (Fe 415) in substructure complete as per drawings and Technical Specification Clause 1002, 1005, 1010 & 1202 including bending for proper and necessary completion of the work and including supply of steel and wastages, bends, hook and authorised overlapping shall be measured as per direction of Engineer-in-Charge.

Supply and fixing of Kota stone in flooring 25' mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 20 mm base coat (bedding) of 1:4 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work.as per SOR Ch-14,SI No 14.23(New Item).

Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats.as per SOR Ch-15,SI No 15.26(New Item).