General Fund-Construction of Compound Wall,Passage and Maintenance and Repairs to Female Toilet at Post office Road in ward no.18

Earth work excavation for foundation inordinary soil with initial lead and lift etc., complete (Narrow Excavation)

Clean Removal of damaged cement plaster from walls and racking out joints 20mm deep including clearing away from site etc complete.

Supplying and filling with clean M. sand in layers of 15cm thick including watering and ramming for consolidation etc., including cost and conveyance of sand and filling etc., complete

Supplying and filling with Stone Dust in layers of 15cm thick including watering and ramming for consolidation etc., including cost and conveyance of sand and filling etc., complete

Plain cement concrete 1:5:10 ( One cement, five sand & Ten 40mm metal) mix using 40mm gauge hard brocken granite stone jelly for foundation and flooring including dewatering if found necessary and laid in layers of not more then 10cm thick well rammed and consoildated including curing etc., complete complying with standard specification and as directed by the departmental officers etc., complete.

Providing steel centering and Shuttering with Necessary strutting Arrangements to the sides and soffits of PCC works etc complete.(Columns)

Providing steel centering and Shuttering with Necessary strutting Arrangements to the sides and soffits of PCC works etc complete.(with strutting)

Supplying ,cutting,Bending,tying and placing in position of MS or RTS Grills including cost of Binding wire Etc., complete.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - (Foundation and Basement)

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - (Ground Floor)

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 4 3/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT(Super structure)

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets,fabrication charges, cost of hold fast and transportation charges etc., complete.

Supply and fixing of M.S Grills Gate using suitable MS L Angle and flats with one coat of Red oxide Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Providing barbed wire-10Gauge-Two ply and four pronged(Galvanised) M-0408 fencing including cost of all materials and labour charges etc.,complete.

Wiring with 2x1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil) (SD.17)

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with continuous earthwire connection of 6sq.mm copperwire with painting of suitable colour (SD.58)

Supply and run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V on 7/20 GI bearer wire for service connection mains .(SD.65)

Supply and run of 2 of 6sq.mm.(84/0.3) PVCinsulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') bent at both ends with necessary angle iron up right and end supports for mains (SD.69)

Supply and fixing of 65mmdia GI pipe(Class'B') of 4 metre length with 300mmx300mmx6mm MS base plate dulywelded at the bottom and with concreting and construction on masonary pedestal with MS box of 30cmx20cmx10cm with angle iron framework with door with lock and key arrangements and with supply and fixing of 25W LED streetlight fitting with bulb and with supply and fixing of 16Afuse unit (500V),5A SP switch inside the MS box and painting with suitable colour ( SD - 98)

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.( SD - 667)

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting two coats with Ready Mixed Enamel Paint over the old iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.