Strengthening and Upgradation works of office chamber of the Honble Minister Rev. and DM, HAD, M and M Department at 2nd Floor of Block D, Janata Bhawan, Dispur, Ghy-6.

Amount

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

Providing and fixing false ceilling at all height including providing and fixing of frame work made of special sections , power pressed from MS. Sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per……………..the Engineer in charge but excluding the cost of painting with: 12.45.4 fully perforated Gypsum plaster board .......... than 0.60.

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including .... trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore,…...... less than 120 gms

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.450 mm long towel rail with….......less than 170 gms

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes ….. direction of Engineer in Charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe:32 mm dia

Providing fitting and fixing decorative partition wall of size 2.14 x 2.00x .16 made of green ply board, vinear etc. fitted with all fittings complete in all respect as specifies and directed by the department

Providing and fixing conference table made out of 19 mm greenply and outside finished with 1 mm thick mica and all inside surface finished with vinear complete with necessary hardware fittings as per design as directed and specified by the department.

Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately

Supplying fitting and fixing Johnson Zebra Roller Blinds (Combi Blackout) make and shade, design as per choice complete as specified and directed by the department at all levels.

Providing, fitting and fixing Office Work Station Table made of green ply board, Sunmoca fitted with Brass fitting complete in all respect as specified and directed

Providing, fitting and fixing Flush Door Shutters of 40 mm thickness made of with 19 mm Green Ply……………………..with all necessaryfittings etc. omplete as directed.

Providing, fitting and fixing wooden flooring (nobile laminate flooring BVG with under layer of 6mm materials & installation including labour, carriage etc. as directed and specified

Supplying & installation of furniture including all necessary fittings as Directed by the Department.

HEMANTA KALITA