Supply Erection Commissioning of 2 No 10 Cs Horizontal Pump Motor Panel alongwith allied accessories at RD 7350-R for village Dighal

Amount

Providing & fixing cast iron double flanged swing check type reflex (non return) valves PN-1.6 marked with IS:5312 including nuts & bolts marked with IS:1363, rubber sheet marked with IS:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. Complete in all respect to the satisfaction of Engineer-in-charge HSR 20.11.10 (500 mm i/d )

Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately). HSR 22.162.6.1 (300 mm diameter Class I)

Supply and installation of 50mm i/d hydraulic pressure relief valve of polemeride with accessories for pressure regulation of irrigation system as per BIS standard. HSR 26.73.10

Supplying, erection, testing and commissioning of Horizontal motor pumping set for clear water having head 20. 00 m as per the indicated requirements of discharge in LPM and power capacity in3 BHP Make: KSB, CRI, Kirtosker, Crompton Greeve, Lubi) HSR 20.115.1 (For priming)

Supplying erection, testing of fully automatic electric control panel board for T/Wells in Pump Chamber consisting of MS sheet of thickness 14 gauge duly painted box type floor mounted made of angle Frame containing 1 no. fully automatic air brake starter suitable for Motor of the following capacity, Min switch of suitable range with HRC fuse, 1 no. volt meter (0 to 500 volts), 1 No. Amp. Meter of O to 100 amp. 3 sets of indicating lamp capacitor of suitable capacity and 1 no. single phase preventers with the timer switch including wiring in panel board and suitable electric energy meter wiring in Electric Control Panel Board complete in all respect as per specification given in Schedule No. II, Including MCB, suitable, Capacitor, Wooden Box etc as per site requirement complete in fal respect.

Supply Erection and commissioning of LT Panel of required specification for 10 Cs Horizontal Pump

Supply erection testing and commissioning of pressure gauge with gilstening immersed completing in all respect with all fitting.

Provinding Horizontal centrifugal pump set complete 10 Cs dis. with Horizontal Motor required for 25 mtr. head

Supply & Erection of MS Delievery/ Suction Pipe 7.1 thickness 12" or 300 mm dia alongwith req MS bends,in accordance with IS 2062:1989 grade A wit epoxy from inside & painted from outside with two coats of anti corrosive bituminous based.

120 SQM mm copper armoured cable 3.5 core