Construction of 50 Bedded Rural Hospital At MurudTq. and District Latur.

Amount

PART – A (Work Portion)

I) Civil Work

ITEM No. 1 :- Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre)

A) Main Building

C) Water Main storage with Borewell

D) Pump House

E) Parking

ITEM No. 2 :- Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift from 1.50 metre to 3.00 metre)

A) Main Building

D) Pump House

ITEM No. 3 :- Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.50 metre)

A) Main Building

C) Water Main storage with Borewell

E) Parking

ITEM No. 4 :- Excavation for foundation in Hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift from 1.5 to 3.0 metre )

A) Main Building

D) Pump House

ITEM No. 5 :- Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with all lifts and leads beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etcetera complete (Lift upto 1.5 metre)

A) Main Building

ITEM No. 6 :- Conveying materials obtained from road cutting including all lifts, laying in layers of 20 centimetre to 30 centimetre breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density for a lead of over 1 Kilometre inclusive from the site of excavation to the site of deposition as directed.

A) Main Building

ITEM No. 7 :- Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etcetera complete. (Material including all lead and lifts)

A) Main Building

D) Pump House

ITEM No. 8 :- Filling in plinth and floors with contractors material / brought from outside and approved by Engineer in charge in layers of 15 centimetre to 20 centimetre including watering and compaction etcetera complete. (Material including all lead and lifts)

A) Main Building

D) Pump House

ITEM No. 9 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. (Material including all lead and lifts)

A) Main Building

ITEM No. 10 :- Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper. (Material including all lead and lifts)

A) Main Building

ITEM No. 11 :- Providing soling using 80 millimetre size trap metal in 15 centimetre layer including filling voids with Crushed sand /grit, ramming, watering etcetera complete. (Material including all lead and lifts)

A) Main Building

D) Pump House

ITEM No. 12 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

A) Main Building

C) Water Main storage with Borewell

D) Pump House

ITEM No. 13 :- Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, plywood / steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etcetera complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

A) Main Building

D) Pump House

E) Parking

ITEM No. 14 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Main Building

ITEM No. 15 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 16 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 17 :- Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With natural sand/V.S.I. quality Artificial Sand

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 18 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for reinforced cement concrete canopy as per detailed designs and drawings including centering, formwork, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing etcetera complete (excluding reinforcement). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

A) Main Building

ITEM No. 19 :- Providing and laying Cast in situ / Ready Mixcement concrete M-25 of trap/ granite/ quartzite / gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 20 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 21 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-25 of trap / quartzite / granite / gneiss metal for reinforced cement concrete Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying / pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etcetera) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 22 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

D) Pump House

ITEM No. 23 :- Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for reinforced cement concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etcetera as per detailed designs, drawings and schedules including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

C) Water Main storage with Borewell

D) Pump House

E) Parking

ITEM No. 24 :- Providing expansion joints in reinforced cement concrete framed structure (interior columns) with plain premoulded filler with confirming to IS 1838,1961, 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate finishing etcetera complete as directed. For all floor level.

A) Main Building

ITEM No. 25 :- Providing expansion joints in reinforced cement concrete framed structure (exterior column) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plate and finishing etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 26 :- Providing expansion joints in reinforced cement concrete framed structure (at floor level) with plain premoulded filler 25 millimetre thick with 75 millimetre wide and 1 millimetre thick stainless steel plat and finishing etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 27 :- Providing expansion joints in reinforced cement concrete framed structure (at Terrace level) with premoulded filler 25 millimetre thick with 40 millimetre wide and 1 millimetre thick stainless steel plate as required, bitumen poured filler and finishing etcetera complete as directed. (Material including all lead and lifts)

A) Main Building

ITEM No. 28 :- Providing fly ash brick masonry with conventional / I.S. type fly ash bricks in C.M. 1:6 in foundation and plinth including bailing out water manually striking joints, racking out joints watering and scaffolding etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 29 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

D) Pump House

ITEM No. 30 :- Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 millimetre diameter / 2 hoop iron strips 25 millimetre X 1.6 millimetre placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 31 :- Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of reinforced cement concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete or burnt brick masonry and or tying by binding wire etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

D) Pump House

ITEM No. 32 :- Providing and applying two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 33 :- Providing internal cement plaster 20 millimetre thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

C) Water Main storage with Borewell

ITEM No. 34 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 35 :- Providing and applying plaster with plaster of paris in 6 millimetre thickness to previously plaster surface in all position including preparing the surface scaffolding etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 36 :- Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 millimetre thick in cement mortar 1:4 using waterproofing compound at 1 kilogram per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 millimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

C) Water Main storage with Borewell

D) Pump House

ITEM No. 37 :- Providing and applying Texture plaster with finishing with texture material of approved make in 3 to 4 millimeter thickness on previously plastered surface, including Plaster Groove 6 millimetre thickness or Tape Grooves 35 to 45 millimetre thickness or as required, in all position including preparing the surface, scaffolding etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 38 :- Providing fine cement finish 1.5 millimetre thick over green plaster surface including scaffolding curing etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

C) Water Main storage with Borewell

ITEM No. 39 :- Providing water proof bedding for flooring of Bath and WC 25 millimetre thick in C.M. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for per bag of cement including leveling, curing and covering 10 years guarantee on court fee stamp paper of Rs.500/- including ponding test etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 40 :- Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12 millimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1 kilogram for per bag of cement laying brick bat coba of required thickness in cement mortar 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 millimetre thick brick bedding in cement mortar 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 41 :- Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar 1:3 admixed with approved water proofing compound and finally top finishing with average 20 millimetre thick layers of same mortar added with jute fiber at 1 Kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound marking finished surface with false squares of 300 millimetre X 300 millimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leak-proofness on Court fee stamp paper of Rs. 500/- including ponding test etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 42 :- Providing waterproof plaster in W.C. and bath 12 millimetre thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kilogram per bag of cement of approved make and manufacturer and curing etcetera complete. (Excluding Tiles) (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 43 :- Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300 millimetre X 40 millimetre X 5 millimetre with oil painting, etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 44 :- Providing and fixing M-40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 6524 1983 having 6 millimetre diameter bars 3 Numbers and stirrups at 250 millimetre centre to centre and fixing in wall with 6 Numbers of hold fast of 12 millimetre diametre bars 500 millimetre long including primer and oil painting etcetera complete) frame size 60 millimetre X 100 millimetre.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 45 :- Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 millimetre thick for door frame/ dado/ window boxing etcetera on cement mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

D) Pump House

ITEM No. 46 :- Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 millimetre thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 millimetre thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 47 :- Providing and fixing solid core flush door shutter in single leaf 32 millimetre thick decorative type of exterior grade as per detailed drawings approved face veneers 3 millimetre thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 48 :- Providing and Fixing 30 MILLIMETRE thick BOTH SIDE PRELAMINATED SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of M.S. tubes of 19 guage thickness and, size 19 X 19 millimetre for styles and 15 X 15 millimetre for the top and bottom rails, M.S. frame shall have a coat of metel primer of approved make and manufacture. M.S frame shall be covered with heat mouled PVC 'C' channel made from 5 millimetre (+/0.25) thick prelaminated sheet of density 600 kg/cbm, of size 30 millimetre thickness 70 millimetre width out of which 50 millimetre shall be flat and 20 millimetre shall be tapered in 45 angle on either side forming stiles ? and 5 millimetre thick, 95 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered in 45 on the inner side to form top and bottom rail and 115 millimetre wide PVC sheet out of which 75 millimetre shall be falt and 20 millimetre shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. An additional 5 millimetre (+/0.25) thick PVC strip of 20 millimetre width is to be stuck on the bottom side of the ' c ' channel prelaminated paneling of 5 millimetre (+/0.25) thick PVC sheet to be fitted inside the Mild Steel frame welded/ sealed to the styles and rails with 5 millimetre (+/0.25) x 30 millimetre PVC sheet beading on either side and joined together with solvent cement adhesive etcetera, 10 millimetre thickness (5 millimetre (+/0.25) X 2 numbers ) 20 millimetre wide cross PVC sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 numbers M.S. powder coated but hinges of size 100 millimetre X 25 Millimetre X 2 millimetre using 32 millimetre long steel screws drilled suitable to pass through both the walls of the M.S. tube, other hardwares should be fixed with 19 X 6 millimetre size steel screws including fixture fasting, complete as per direction of engineer in charge. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 49 :- Sliding Window- 3 Track (2 Glass shutter + 1 flymesh) of approved make with DGU, providing and fixing of Sliding Window- 3 Track (2 Glass shutter + 1 flymesh ). For details refer to Specifications and as directed by Engineer in charge. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) Second Floor

ITEM No. 50 :- Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 X 38 millimetre X 1.22 millimetre box type, 5 millimetre thick sheet glass louvers, of approved quality etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 51 :- Providing and fixing mild steel grill work for windows, ventilators etcetera 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

D) Pump House

ITEM No. 52 :- Providing and fixing collapsible steel gate in one / two leaves with hot rolled vertical channels of 18 X 9 X 3 millimetre minimum size, crossings of Mild Steel flats of size 18 X 5 millimetre T or E section for runner of minimum 40 X 6 millimetre size for flange, M.S. flat for top runner of minimum size 40 X 12 millimetre with roller wheels confirming to grade F.G. 150 fitted with snap headed rivets of minimum size 6 millimetre max. spacing of vertical channels be 100 millimetre enclosed gate position and clear space of 150 millimetre between two sets of crossings with hold fasts, stoppers, spaces, handles, locking arrangement and one coat of red lead primer and oil painting etcetera complete. (I.S. 10521:1983). (Material including all lead and lifts)

A) Main Building

ITEM No. 53 :- Providing and fixing Mild Steel grill door 24 kilogram per square metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etcetera. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 54 :- Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 millimetre diameter and vertical pipe of 38 millimetre diametre at 0.60 metre centre to centre or as required and horizontal pipes of 25 millimetre diametre in three rows, all pipes of 2 millimetre thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 millimetre diameter above newel post of 75 millimetre diameter etcetera complete (Prior approval of sample and brand by Executive Engineer is necessary before use) (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 55 :- Providing and fixing 40 millimetre diameter and 1.50 millimetre thick Stainless steel hand railing in Stainless steel 304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 56 :- Providing and laying handcut polished Kotah Stone flooring 25 millimetre to 30millimetre thick and 30 centimetre wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 57 :- Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 millimetre thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing and cleaning etcetera complete.

A) Main Building

ITEM No. 58 :- Providing and fixing machine cut machine polished 18 millimetre to 20 millimetre thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

D) Pump House

ITEM No. 59 :- Providing and laying Antiskid Ceramic / designer tiles of approved quality of size 30 centimetre x 30 centimetre and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 60 :- Providing and laying ceramic tiles of having size 30 centimetre x 30 centimetre and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 61 :- Providing and laying Vitrified MATT finish having decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etc .complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 62 :- Providing and laying vitrified mirror / glossy finish tiles having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etcetera complete. b) Skirting

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 63 :- Providing and laying matt finish ceramic tiles of having size 30 centimetre X 30 centimetre confirming to I.S.15622/2006 (group D II-A) and 7 to 8 millimetre thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 64 :- Providing and laying chequered tiles of approved quality of size 30 centimetre x 30 centimetre, confirming to corresponding I.S. for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 65 :- Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 millimetre thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 kg/sq. centimetre reaffirmed in 2006, having wert transvrse strength of 3.5 / millimetre 2, water absorption less than 10% abrasion / wear resistance less than 2 millimetre, skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plain / designed pattern on a bed of 1:4 cement mortar including cement float,filling joints with neat cement slurry,curing, polishing and cleaning etcetera complete. For flooring.

A) Main Building

ITEM No. 66 :- Providing and laying Vitrified RUSTIC MATT STONE finish having decorative type tiles of size 600 millimeter x 600 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical and confirming to IS 15622-2006 (Group Bla) of approved make shade and pattern for flooring in required position laid on a bed of bonding chemical filling joints curing and cleaning etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 67 :- Providing and fixing in position Gypsum board false ceiling with 12.5 millimetre thick Gypsum boards, screwed / fixed to the understructure of suspended G. I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 X 50 millimetre maximum center to center distance of 600 millimetre perimeter channel and intermediate channels at maximum center to center distance 1200 millimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevents trapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cutouts, painting including labour, material, lifts etcetera all complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 68 :- Providing and fixing Modular false ceiling of 600 x 600 millimetre center to center and 13 millimetre thick square mineral fiber board to be fixed on frame work of alluminium sections for suspended false ceiling consisting of alluminium T 2”x1 ½” (50 millimetre x 40 millimetre) weighing 0.39 Kilogram/m at 60 cms center center and fixed with ½” x ½” (15 x 15 millimetre) flanges weighing 0.19 Kilogram/m suspended on 6 millimetre diametre mild steel rod weighing 0.22 Kilogram/m, fixed on wall and beams including rounding of the edges with alluinium T of 2” x 1 ½” (50 millimetre x 40 millimetre) weighing 0.39 Kilogram/m etcetera (all alluminium sections shall be anodized) including all labour, material, lifts etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 69 :- Providing and laying in trenches 15 millimetre daimetre CPVC pipe including necessary excavation, fittings, refilling trenches etcetera complete including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

A) Main Building

ITEM No. 70 :- Providing and laying in trenches 20 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

A) Main Building

ITEM No. 71 :- Providing and laying in trenches 25 millimetre daimetre CPVC pipe including necessary excavation, fittings, refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

A) Main Building

ITEM No. 72 :- Providing and laying in trenches 32 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

A) Main Building

ITEM No. 73 :- Providing and laying in trenches 40 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete.

A) Main Building

ITEM No. 74 :- Providing and laying in trenches 50 millimetre daimetre CPVC pipe including necessary excavation, fittings. Refilling trenches etcetera complete, including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 75 :- Providing and fixing 15 millimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete.

A) Main Building

ITEM No. 76 :- Providing and fixing 20 millimetre diameter screw down bib / stop tap of brass including necessary socket union nut complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 77 :- Providing and fixing screw down for 20 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete.

A) Main Building

ITEM No. 78 :- Providing and fixing screw down for 25 millimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 79 :- Providing and fixing screw down for 32 millimetre diameter wheeled stop tap of brass including necessary sockets / union nut complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 80 :- Providing and fixing screw down for 40 millimetre diameter wheeled stop tap of brass including necessary sockets/union nut complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 81 :- Providing and fixing screw down for 50 millimetre diameter wheeled stop tap of brass including necessary sockets/ union nut complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 82 :- Providing and Fixing half turn 25 millimetre diameter gun metal flushing cock including all accessories etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 83 :- Providing and fixing 100 millimetre diameter chromium plated brass showers rose to 15millimetre diameter supply pipe including necessary bend and socket complete.

A) Main Building

ITEM No. 84 :- Providing and fixing 20 millimetre diameter water meter with non-return valve including strainer, sockets/ union nut including water meter box making locking arrangement and lock. (without chamber). (Material including all lead and lifts)

A) Main Building

ITEM No. 85 :- Providing and fixing 25 millimetre diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [Without chamber]. (Material including all lead and lifts)

A) Main Building

ITEM No. 86 :- Providing and fixing 40millimetre diameter water meter with non-return valve including strainer, sockets/ union nut and including water meter box making locking arrangements and lock. [Without chamber]. (Material including all lead and lifts)

A) Main Building

ITEM No. 87 :- Providing and fixing C.P. pillar cock long neck with aerator of approed make including necessary sockets / union nut etcetera complete.

A) Main Building

ITEM No. 88 :- Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres. (Material including all lead and lifts)

A) Main Building

ITEM No. 89 :- Providing and fixing stainless steel sink of size 600 x 510 x 200 millimetre including coupling, outlet pipe, elbow and other necessary fitting, finishing etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 90 :- Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 91 :- Providing and constructing Brick Masonry Inspection Chamber 90 centimetre x 45 centimetre x 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with reinforced cement concrete Cover medium duty 140 kilogram with frame etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 92 :- Providing and laying 100 millimetre diametre salt glazed stoneware pipe including fittings such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

A) Main Building

ITEM No. 93 :- Providing and laying for 150 millimetre diametre salt glazed stoneware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

A) Main Building

A) Main Building

ITEM No. 95 :- Providing and fixing 1st class white glazed earthenware Orissa Type Water Closet Pan 580 millimetre diametre including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 millimetre thick, 10 liter Poly Vinyl Chloride flushing cistern with all necessary pipe connection etcetera complete.

A) Main Building

ITEM No. 96 :- Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 millimetre size of approved make including soil pipe, vent pipe up to outside face of wall, 100 millimetre diameter galvanized iron plug bend inlet pipe all fittings, cutting and making good walls, floors etcetera complete.

A) Main Building

ITEM No. 97 :- Providing and fixing wall hung white wash basin of size 350 X 450 X 165 millimetre with approved make pillar cock, C.P. Angular stop cock long thread approved make continental including SS bottle trap of approved make having necessary pipe connection upto the outside face of the wall etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

A) Main Building

ITEM No. 98 :- providing and fixing oval type under counter wash hand basin of 16 inch x 22 inch size and of special colour shade having telephonic black / coloured granite of 180 millimetre thick stone black kadappa framework including chromium plated coupling bottle - Trap using CERA company or equivalent oval typa wash basin model no 3448 as per detailed drawing or as directed by engg incharge etcetera complete. (Counter size 1.20 metre x 0.60 metre )

A) Main Building

ITEM No. 99 :- Providing and fixing 10 centimetre Cast Iron Nahani Trap including cast iron grating bend and piece of Cast Iron pipe upto the outside face of the wall complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 100 :- Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (Material including all lead and lifts)

A) Main Building

ITEM No. 101 :- Providing and fixing Poly Vinyl Chloride Rain water pipes of 110 millimetre outer diameter and having wall thickness of 2.2 to 2.7 millimetre confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25 millimetre to 40 millimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes, all the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etcetera complete. (The contractor shall give 3 years guarantee bond for payment). (Material including all lead and lifts)

A) Main Building

ITEM No. 102 :- Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats. (Material including all lead and lifts)

A) Main Building

ITEM No. 103 :- Providing and fixing reinforced cement concrete cover of size 90 centimetre X 45 centimetre with frame over inspection chamber etcetera complete Medium duty (140 kilogram) (Material including all lead and lifts)

A) Main Building

ITEM No. 104 :- Providing and fixing 100 millimetre diametre stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etcetera complete. (Material including all lead and lifts)

A) Main Building

C) Water Main storage with Borewell

ITEM No. 105 :- Providing and fixing in position UPVC ultra violet stabilized 110 millimetre outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 106 :- Providing and fixing black kadappa stone as shelves 25 millimetre thick machine polished, extending the polish upto 20 centimetre width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etcetera complete.

A) Main Building

ITEM No. 107 :- Providing and applying one coat of seal cement primer of approved manufacture and shed including scaffolding preparing the surface by cleaning dirt and other foreign matters, scrapping if necessary including scaffolding etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 108 :- Providing and applying two coats of exterior acraylic emulsion paint confirming to corresponding I. S. of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary, and watering the surface for two days etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 109 :- Providing and applying priming coat on concrete/ masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etcetera complete. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 110 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 111 :- Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 112 :- Providing and applying 2 coats of alluminium paint of approved make to new structural steel work in buildings and workshops including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat)etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 113 :- Providing and fixing 45 centimetre wide mild steel ladder of 40millimetre X 6 millimetre mild steel flat stringers and steps of 18 millimetre diameter mild steel bar for water tank including fixing it in (1:2:4) M-15 cement concrete block 60 centimetre x 30 centimetre x 30 centimetre and painting the ladder complete. (Anti Corossive Paint)

A) Main Building

ITEM No. 114 :- Providing and fixing 450 millimetre X 550millimetre size superior type Belgium mirror with 16 millimetre diameter nickel plated towel rod etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 115 :- Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the letters / figures with approved colour and shade complete. (Material including all lead and lifts)

A) Main Building

A) Main Building

ITEM No. 117 :- Providing and constructing Ductile Iron circular manhole 45 centimetre diametre at top 90 centimetre at bottom upto 1.80 meter to 2.70 meter depth including excavation, laying 1:4:8 cement concrete bedding 15 centimetre thick burnt brick mansonry with 1:1 cement mortar plaster 25 millimetre thick inside and outside 20 millimetre (1:3) ductile iron heavy type cover with ring 25 Kilogram in weight, high strength. More life and Durability, Good Antiskid Grip, Suitable to heavy theatric loading, Light weight casting after cost benefits for Transportation Refilling etcetera as per requirement with prior approval of concerned Superitending Engineer. (Material including all lead and lifts)

A) Main Building

ITEM No. 118 :- Rain Water Harvesting - Shallow Percolation Pit providing, constructing 2.0 metre deep shallow depth percolation pit comprising of 1.0 metre diametre pre-cast RCC rings, 300 millimetre thick side filling around outside of RCC rings (annular space) with 40 millimetre size boulders including filling of percolation pit upto 0.50 metre depth (from bottom up) with 25-75 millimetre clean washed gravels followed by 0.5 metre depth of 10-25 millimetre of clean washed stones followed by 0.5 metre of washed river fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera ) including netlon mesh between each gravel / fine aggregate (natural sand / crushed sand VSI grade finely washed etcetera) media layer including covering with RCC slab, manhole frame and cover, PVC rungs etcetre including arrangement for inlet and outlet pipe, excavation and backfilling as shown in the drawing. The rate shall be inclusive of all labour, material, wastage, scaffolding, transportation, taxes, including all leads, lifts at all levels. All material should be of approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge. (Material including all lead and lifts)

A) Main Building

ITEM No. 119 :- Boring / drilling bore well of 300 millimetre diametre for casing / strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants and machinery required for the job, all complete as per direction of Engineer in charge, upto 90 metre depth below ground level. (Material including all lead and lifts)

A) Main Building

ITEM No. 120 :- Supplying, assembling, lowering and fixing in vertical position in bore well, UPVC medium well-casing pipe with outer diametre of 165.4 millimetre diametre, conforming to IS:12818, including required hire and labour charges, fittings and accessories etcetera all complete, for all depths, as per the direction of Engineer in charge. (Material including all lead and lifts)

A) Main Building

ITEM No. 121 :- Providing and laying concrete pipes of I.S. NP class of 300 millimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 122 :- Providing and fixing C.P. sink cock with raised J shaped swinging casted spout jaquar or equivalent make continental (CAT.NO. CON -359) including necessary sockets/ union nut etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 123 :- Providing and fixing machine cut mirror polished 18 millimetre to 20 millimetre thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with rounding the edges etcetera complete Both side polish. (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 124 :- Raising of scafolding to reach the entire surface area of bridge. upto10 metre height above ground level, made with MS tube, horizontal and vertical tub joint with cup and lock system with MS tubes, challies, MS clamp and maintaing it in a serveciabl econdition for execution work of cleaning and/ or pointing and or/applying protection coating and/ inspection of work at required locations and removing it there after etc complete. (Item includes making of temporary support for scaffolding, cost of scaffolding, labour, material, safety devices,etcetera, all complete) (Material including all lead and lifts)

A) Main Building

ITEM No. 125 :- Clearing grass and removal of rubbish up to a distance of 50 metres outside the periphery of the area.

A) Main Building

ITEM No. 126 :- Providing and Fixing Rollar Blinds AMI Make or approved make and shade of 38 millimetre round Aluminium channel with Blackout fabric & telting with chain (Ball) system with all necessary fixtures and fitting etcetera complete. (Sample to be final by Engineer In-charge prior execution of work). (Material including all lead and lifts)

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 127 :- Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etcetera as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 128 :- Providing patti/ band 100 millimetre wide on plastered surface 12 millimetre to 15 millimetre thick in C.M. 1:3 line and level including neat finishing scaffolding curing etcetera complete.

A) Main Building

I) First Floor

ITEM No. 129 :- Providing groove to required size at specified location as directed by Engineer, at junction of brick masonry wall and reinforced cement concrete beams or column, at junction of composite masonry, including scaffolding, finishing, curing etcetera complete.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 130 :- Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 millimetre diameter P.V.C flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap, soil pipe connection upto the outside face of the wall.

A) Main Building

I) Ground Floor

II) First Floor

ITEM No. 131 :- Providing and fixing in position extruded aluminium partitions having frame made out of extruded tubular section of size 65 millimetre X 40 millimetre with 12 millimetre thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 12923:1990, laminated on both sides, Novateak or equivalent with aluminium glazing clips of size 12 millimetre X 12 millimetre (conical) as per drawing etcetera complete. (Material including all lead and lifts)

A) Main Building

ITEM No. 132 :- Supplying and installing of in position the signages " FIRE ORDER" it should contain the following matter on 3 millimetre thick "Opaque" PVC foam board of computerized cut, PVC Non-reflective self adhesive vinyle painted foam board of 3' x 4'. Product to be ADA compliant and modular system.

A) Main Building

ITEM No. 133 :- Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 m with aluminium door frame of powder coated section 101.60 x 44.75millimetre, 3.18 millimetre thick and shutter comprising of powder coated section having bottom and lock rail of size 150 millimetre X 44.5 millimetre X 3.00 millimetre thick top rails 47.62 x 44.45 millimetre X 3.00 millimetre thick, vertical style 47.62 x 44.45 millimetre, 3.00 millimetre thick and for shutter plain glass panes 5 millimetre thick for top panels and 12millimetre thick both side laminated phenol bonded particle board panels for bottom panels etcetera, I.S.I. mark, with bijagiri having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250millimetre length tower bolts, 150millimetre diam. pad handle, etcetera as per detailed design and drawing or as directed by engineer in charge including all materials, labours, and equipment etcetera complete

A) Main Building

ITEM No. 134 :- Providing and fixing lightening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25millimetre diameter 1.2 millimetre thick with multiple points head 1.2 mt. long ( Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 millimetre diaof requiired length with M.S. round bnase plate 25 centimetre diam and 10millimetre thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45 centimetre diam x 45 centimetre Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kg charcoal and salt with altemate layers of charcoal and salt and G.I.pipe 40millimetre dia 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling comcpete Note- Copper strip fropm lightening conductor is not considered in this item.

A) Main Building

ITEM No. 135 :- Providing and fixing corrugated galvanised iron sheets of 0.63 millimetre thick (24 B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etcetera complete.(Weight of 5.5 kilogram per square metre).

A) Main Building

ITEM No. 136 :- Providing and fixing shutter to wall cupboard made from 19 millimetre thick Teak particle board with approved coloured laminated face 1.5 millimetre thick bonded with phenol formaldehyde synthetic resin B.W.P. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etcetera complete. (Excluding cupboard frame). (Material including all lead and lifts)

A) Main Building

ITEM No. 137 :- Providing and fixing during laying in RCC Slab rectangular 2 millimetre thick Mild steel sheet fan hook box of size 180 X 100 millimetre with required depth with holes or notches as required, bottom and top sides of 1.6 millimetre mild steel sheet fixed with 3.5 millimetre diameter round headed screws together with 12 millimetre diameter mild steel bar bent to shape with hooked ends for fan hook and painting to exposed surface. (Material including all lead and lifts)

A) Main Building

ITEM No. 138 :- Providing and fixing in position DESIGNED LASER CUT M.S GRILL WORK for opening, windows, etc. 4 millimetre thick as per design /drawing approved by the ARCHITECT including fixtures, necessary welding and painting with one coats of anticorrosive paint and twocoats of Aluminium paint painting complete.

A) Main Building

ITEM No. 139 :- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. By Mechanical Means.

B) Internal Concrete Road

E) Parking

ITEM No. 140 :- Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 metre, not less than 97 % of standard Proctor density after laying them in layers of 20 centimetre to 30 centimetre with vibratory roller.

B) Internal Concrete Road

ITEM No. 141 :- Transporting the materials obtained from road cutting including all lifts and the lead upto 1 Kilometre inclusive from the site of excavation to the site of deposition as directed.

B) Internal Concrete Road

E) Parking

ITEM No. 142 :- Providing earth work in embankment with approved materials obtained from departmental land with all lifts and leads, including all lifts, laying in layers of 20 centimetre to 30 centimetre thickness breaking clods, dressing to the required lines, curves, grades and section, watering and compaction with Vibratory Roller to achieve not less than 97 % of standard proctor density etcetera complete. (Material including all lead and lifts)

B) Internal Concrete Road

ITEM No. 143 :- Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader / Paver on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 - By Mix in Place Method and Grading – II Material (Material including all lead and lifts)

B) Internal Concrete Road

ITEM No. 144 :- Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 millimetre, cement content not to be less than 150 Kilogram per cubic metre, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-in-charge, compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etcetera complete. (Material including all lead and lifts)

B) Internal Concrete Road

E) Parking

ITEM No. 145 :- Providing and laying in situ cement concrete M-30 with tremix treatment for 200 millimetre thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 millimetre wide and 20 millimetre deep with necessary refilling with bitumen (excluding reinforcement) with Natural sand etcetera complete

B) Internal Concrete Road

E) Parking

ITEM No. 146 :- Providing and fixing in position TMT FE 500, tie bars precoated with anticorrosive epoxy paint of 12 millimetre diameter 70 centimetre long and at 30.00 centimetre centre to centre and wherever directed including handling, straightening wrapping with paper of approved quality for half length, necessary cutting, handling, straightening, supported by assembly of TMT FE 500, chairs with proper alignment etcetera complete.

B) Internal Concrete Road

ITEM No. 147 :- Supplying soft murum having PI < 6 at the road side, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

B) Internal Concrete Road

ITEM No. 148 :- Supplying hard murum / kankar at the road side, including conveying with all leads and stacking etcetera complete as directed by Engineer in charge. (Material including all lead and lifts)

E) Parking

ITEM No. 149 :- Spreading hard murum/ soft murum/ gravel or kankar for side width complete.

B) Internal Concrete Road

E) Parking

ITEM No. 150 :- Compacting the hard murum side widths including laying in layers on each side with Vibratory roller including artificial watering etcetera complete.

B) Internal Concrete Road

E) Parking

ITEM No. 151 :- Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 millimetre thick including 1.5 Refractive index reflectorizing glass beads @ 250 gm/sqm. Thickness of 2.5 millimetre is exclusive of surface applied glass beads as per IRC 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcd/sqm/ lux and Qd of 100 mcd/sqm/ lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to IRC 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications. (Refer MORTH Clause 803 for technical Specification and Performance for IRC 35:2015).

B) Internal Concrete Road

ITEM No. 152 :- Excavation for foundation in Hard murum and boulders including removing the excavated material with all lifts and leads, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etcetera complete. (Lift upto 1.5 metre)

C) Water Main storage with Borewell

E) Parking

ITEM No. 153 :- Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with all lifts and leads beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth / murum, ramming, watering including shoring and strutting etcetera complete. (Lift from 1.5 metre to 3.0 metre)

C) Water Main storage with Borewell

ITEM No. 154 :- Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite / quartzite / gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, cover blocks, laying / pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

C) Water Main storage with Borewell

ITEM No. 155 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etcetera complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

C) Water Main storage with Borewell

D) Pump House

E) Parking

ITEM No. 156 :- Providing and laying Cast in situ / Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete pardi of required thickness including centering, formwork, cover blocks, laying / pumping, compacting, curing, finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.).

C) Water Main storage with Borewell

ITEM No. 157 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for reinforced cement concrete slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.)

C) Water Main storage with Borewell

D) Pump House

ITEM No. 158 :- Providing and applying water proofing treatment using acrylic polymer modified cement based water proofing coating with fibre glass mesh mixing at the rate of powder to liquid (2:1) by weight covering 9 to 10 sqm /kg with two coat using Dr. Fixit or alike of chemicals for masonry and concrete surface by brush covering 7 years guarantee on Stamp Papers etcetera complete.

C) Water Main storage with Borewell

ITEM No. 159 :- Providing and fixing 20 to 25 millimetre thick rough shahabad box type waterproofing for basement or underground floor on a base of Cement concrete 1:3:6, including sub base of 2.50 centimeter thick Cement mortar 1:3 with conceal, secrete (RMW), Algae proof or other alike waterproofing liquids, raking of joints upto 35 millimetre depth, filling the joints with 6 millimetre size crushed metal, hand grouting with cement slurry, curing and cleaning, with 7 years guarantee on court fee stamp of Rs. 100/- with ponding test etc complete. (excluding Cement concrete 1:3:6 base concrete )

C) Water Main storage with Borewell

ITEM No. 160 :- Drilling surface bore well 150 millimetre diameter in all types of strata by DTH rig machine including transportation etcetera complete.

C) Water Main storage with Borewell

ITEM No. 161 :- Providing and fixing UPVC casing pipe 180 millimetre diameter (6 Kilogram per centimeter2) (IS 4985-1988) complete.

C) Water Main storage with Borewell

ITEM No. 162 :- Yield testing by 90 V notches etcetera complete as directed by Engineer in charge

C) Water Main storage with Borewell

ITEM No. 163 :- Providing and fixing UPVC cap for 180 millimetre casing pipe etcetera complete. (Material including all lead and lifts)

C) Water Main storage with Borewell

ITEM No. 164 :- Providing and supplying in standard lengths Polythelene pipes (6 Kilogram per square centimetre – 63 millimetre diameter) (including all local and central taxes, octrai, inspection charges etcetera complete.

C) Water Main storage with Borewell

ITEM No. 165 :- Lowering, laying, jointing in standard lengths Polythelene pipes (6 Kilogram per square centimetre – 63 millimetre diameter) (including all local and central taxes, octrai, inspection charges etcetera complete.

C) Water Main storage with Borewell

ITEM No. 166 :- Supplying and erecting submersible pumpset of 5.625 KW / 7.5HP with 415V, 50c/s AC supply suitable for 150 millimeter diametre bore well suitable for 250 to 700 LPM discharge at 44 to 20 meter head and (maximum efficiency at 32 metre head and 500 lpm) discharge and delivery pipe of Size-65 millimetre diameter with a necessary H type clamps as per specification.

C) Water Main storage with Borewell

ITEM No. 167 :- Supplying and erecting flat flexible 3 core 4 sqmm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assmbly complete.

C) Water Main storage with Borewell

ITEM No. 168 :- Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete work in foundations like raft, strip foundations, grillage and footings of reinforced cement concrete columns and steel stanchions etcetera including bailing out water, formwork, laying / pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etcetera complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.). (Material including all lead and lifts)

D) Pump House

E) Parking

ITEM No. 169 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for reinforced cement concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etcetera complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.) (Material including all lead and lifts)

D) Pump House

E) Parking

ITEM No. 170 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete chajja as per detailed design and drawings including centering, formwork, cover blocks compacting, curing, finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etcetera complete. With fine aggregate (Crushed sand VSI Grade.)

D) Pump House

ITEM No. 171 :- Providing internal cement plaster 12 millimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etcetera complete. (Material including all lead and lifts)

D) Pump House

ITEM No. 172 :- Providing and applying a base coat comprising of 1 Kg Polydee-MC and 1 Kg fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A : 1 B) ) Antibacterial food grade coating inside drinking water tank in two coats with time interval of minimum 8 hrs. covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etcetera complete.

D) Pump House

ITEM No. 173 :- Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 millimetre to 605 millimetre X 590 millimetre to 605 millimetre of 8 to 10 millimetre thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etcetera complete. a) Flooring

D) Pump House

ITEM No. 174 :- Providing and fixing 34 millimetre thick moulded door shutter consisting of solid core single leaf flush door of 30 millimetre thickness lipped with 15 millimetre ( 5 millimetre X 3 ) thick X 30 millimetre width on one style and top rail and 10 millimetre (5 millimetre X 2 ) thick X 30 millimetre width on other style and bottom rails. The inner panels laminated with 2 millimetre thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 design in different plain and /or prelim colours on one side after routing the moulded design on flush doors and 2 millimetre plain and /or pre lam PVC on other side using rubber adhesive on flush door and solvent cement adhesive on the PVC lipping etcetera as per direction of Engineer in charge and manufacturers specification and drawing etcetera complete. (Material including all lead and lifts)

D) Pump House

ITEM No. 175 :- Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 X 38.10 X 0.90 millimetre at weight 0.637 kilogram per running metre with window frame bottom track section 92 X 31.75 X 1.30 millimetre at weight 1.070 kilogram per running metre top and side track section 92 X 31.75 X 1.30 millimetre at weight 0.933 kilogram per running metre The shutter should be of bearing bottom 40 X 18 X 1.25 millimetre at weight 0.417 kilogram per running metre Inter locking section 40 X 18 X 1.10 millimetre at weight 0.469 kilogram per running metre and handle and top section 40 x 18 x 1.25 millimetre at weight 0.417 kilogram per running metre as per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 millimetre thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etcetera, complete, with powder coating without box.

D) Pump House

ITEM No. 176 :- Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etcetera complete.

D) Pump House

ITEM No. 177 :- Providing and applying two coats Apex Ultima Puranature Anti-Pollution or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etcetera) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide and Absorbs CO2 (4.8 kilogram per 15 litres). Plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty should be given by the Manufaturer the work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist.

D) Pump House

ITEM No. 178 :- Providing and fixing colour coated Zincalume (R) AZ150 (minimum 150 grams per Square metre total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 millimetre Base Metal Thickness (BMT) (0.5 millimetre TCT ), Hi-strength steel with minimum 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 millimetre effective cover width and nominal 25-30 millimetre deep ribs with subtle square fluting in the five pan at nominal 180-250 millimetre center-to-center. The end rib shall be designed for anti-capillary groove and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with minimum fastened with minimum 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etcetera complete. (weight of profile 4.52 kilogram per square metre)

E) Parking

ITEM No. 179 :- Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etcetera complete.

E) Parking

ITEM No. 180 :- Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with Vibratory roller to the required density. By Mechanical Means- Grading I (Using Screening Type A (13.2) millimetre Aggregate) (Material including all lead and lifts).

E) Parking

ITEM No. 181 :- Providing and fixing factory made Hydraulically pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 millimetre thick in M-40 grade of approved size and shape for City streets, small / medium market roads, low volume roads, utility cuts on arterial roads etcetera as specified and as per IS 15658 : 2006 including cost of all materials, manufacturing, curing, transportation of blocks to work site including loading, unloading and stacking as directed, laying paving blocks in position over prepared bed of natural sand / crushed sand of 50 millimetre thickness including necessary excavation in all stratas, spreading blindge of fine sand over the prepared bed, compacting blocks by plate vibrator etcetera complete.

E) Parking

ITEM No. 182 :- Providing and Suppying Single Bed of size @ 2025L X 1000D X 650H made from specified MS section with Top made from CRCA M.S Sheet all EPOXY COATED with ABC Head and Foot Bows with provision of I.V Road at all corners as Directed by Engineer incharge etcetera complete.

F) Furniture

ITEM No. 183 :- Bed Side Table @ 400LX 400DX 415H : Providing and Fixing Bed Side Table of size 400LX 400DX 415H The bed side unit is made up of 18 millimetre thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 millimetre thick PVC edge Banding. The bed side table has one drawer and one shelf. The shelf is made of 18 millimetre thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2mm thick PVC edge Banding.

F) Furniture

ITEM No. 184 :- Medium Height Partition @ 1800 / 1200HT TILE BASED PARTITION SYSTEM:- Tile based Aluminum partition system of 1800 / 1200 millimetre height made of 60 millimetre thick aluminum frames having two separate race ways for laying electrical and computer wiring. The wire management shall be through to the race way to be fitted at bottom of partition and other immediately below of work top with hook on type raceway cover for easy access of wires. Frames to be joined by aluminum connectors with M6 x 16 pan-head machin screw and washer with aluminum post cover. Post cover of snap on fashion to be connected on aluminum connectors. All visible aluminium to be in anodized finish. The top/ exposed sides of the frame and posts should be covered with horizontal/ Vertical trim and caps made of Aluminum in anodized finish in order to enhance its look.Upper tiles of partition to be in Soft Board or Marker tile of 9 millimetre thick, and prelaminated partical board lower tiles in laminate finish of 9 millimetre thick on both the sides. (Material including all lead and lifts)

F) Furniture

ITEM No. 185 :- Public Seating Chair - 3 Seater : Providing and fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. (Material including all lead and lifts)

F) Furniture

ITEM No. 186 :- Executive's Table : 1800 L X 900 D X 750 HT : Providing and Fixing of Table 1800 L X 900 D X 750 HT - TOP and GABLE END to be made of Membrane finish with soft water fall edges and curved panel and Decorated Anodized section MODESTY PANEL to be made of 18 millimetre thick Prelaminated particle board with PVC edge band as per drawing. (Material including all lead and lifts)

F) Furniture

ITEM No. 187 :- Executive Table @ 2250 L X 2100 D X 750 HT including Low Height Credestal @ 1200 L X 450D X 650HT : Providing and Fixing of Table @ 2250 L X 2100 D X 750 HT TOP and GABLE END to be made of Membrane finish with soft water fall edges and curved panel and Decorated Anodized section MODESTY PANEL to be made of 18 millimetre thick Prelaminated particle board with PVC edge band. INCLUDING CREDESTAL @ 1200 L X 450 D X 650 H : To be made out of Membrane Finish (2 Openable Shutter and 3 Drawer Pedestal in between) as per drawing. (Material including all lead and lifts)

F) Furniture

ITEM No. 188 :- Conference Table @ 3600L X 1400D X 750HT : Providing and Fixing of Main Table @ 3600L X 1400D X 750HT - made up of 18+18 millimetre Thick MDF top with PVC Membrane finish and waterfall edge profile. Aluminium Anodizied finish beeding of 4 millimetre thick is running all over the table top edge. Gable ends is Aerofoiled Shape with front edges in PVC Membrane finish and rest in Prelaminated MDF with batton structure. Gable ends should be hollow from inside for the provision of passing electrical and Data wiring. , MODESTY PANEL :- to be made of 18 millimetre thick Prelaminated particle board with PVC edge band Access Flap :- For Wire manager 2 Numbers. (Material including all lead and lifts)

F) Furniture

ITEM No. 189 :- Low Height Openable Storage of 900 L X 450 X 750 HT : Providing and fixing Openable Steel Storage of 900 X 450 X 750 Ht, with 2 adjustable shelves, complete body and shutter made in 0.8 millimetre thick and Top in 2 millimetre thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns with 25 millimetre thk additional Top on top of storage as as per drawing.

F) Furniture

ITEM No. 190 :- Medium Height Steel Storage of 750 L X 450 D X 1200HT : Providing and fixing Openable Steel Storage of 750 X 450 X 1200 Ht, with 2 adjustable shelves, complete body and shutter made in 0.8 millimetre thick and Top in 2 millimetre thick CRCA, 2 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns with 25 millimetre thick as per drawing. (Material including all lead and lifts)

F) Furniture

ITEM No. 191 :- Full Height Steel Storage of 750L X 450D X 2100 HT : Providing and fixing Openable Steel Storage of 750 X 450 X 2100 Ht, with 4 adjustable shelves, complete body & shutter made in 0.8 millimetre thick and Top in 2 millimetre thick CRCA, 4 Shutter to be mounted with the help of cup hinges, and 4 adjustable levelers, enitre storage in powder coated finish with 60 to 80 microns as as per drawing. (Material including all lead and lifts)

F) Furniture

ITEM No. 192 :- Tea Table 900 millimetre X 750 millimetre X 450 millimetre for mild steel ante chamber : Providing And Fixing of Tea Table 900 millimetre X 750 millimetre X 450 millimetre With 12 millimetre Thick Colour Eitched Tempered Glass With Bevelled Drawing Made Out Of 18 millimetre Thick Waterproofing Ply. The outer laces to be finished with high quality 4 millimetre thick Veneer or 1 millimetre Thick Mica etcetera. (Material including all lead and lifts)

F) Furniture

ITEM No. 193 :- Sofa Set 3+1+1 : Providing and fixing Sofa Set 3+1+1 Brown and Cream leather DIMENSION Length : 182.5 centimetres; Breadth : 100 centimetres; Height : 100 centimetres; Weight : 66 (Kilogram) Seating Capacity: Five Seat. (Material including all lead and lifts)

F) Furniture

ITEM No. 194 :- Providing and Arrangemnt of High Back Chair - tilt mechanism with multilocking, high density cushion on seat composite leather with metallic silver finish base and arms with p.u.castors gaslift for height adjustment. (Material including all lead and lifts)

F) Furniture

ITEM No. 195 :- Providing and Arrangemnt of High Back, Synchronized Mechanism with Multiple Locking, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery. (Material including all lead and lifts)

F) Furniture

ITEM No. 196 :- Single Faced Mobile Unit for Compactor : 2150 millimetre H x 2745 millimetre W x 457 millimetre D Providing and fixing Single Faced Mobile Unit for Compactor 2150 millimetre H x 2745 millimetre W x 457 millimetre D - BASE FRAME : Base Frame shall be fabricated in channel Type from minimum 2.5 millimetre thick MS Sheet Size of Channel 25 millimetre x 100 millimetre x 45 millimetre . GUIDE RAILS : The guide rails shall be made out of 28 millimetre Bright bar placed on 1.2 millimetre thick M.S. Plate which will be above the floor and are as per the international standard of safety. SUPER STRUCTURE : Super structure of the Mobile storage system will consist of knock down type panels. All the components such as shelves, front panel, end panel, vertical rear panel, central partition etc. Will act as an integral member of the Unit. SHELVES : Shelves made of 22SWG thick Prime Quality C.R.C.A. having 10 folds each will be provided each designed to carry a U.D.L. of 70 Kilograms. VERTICAL PANEL : Vertical panel consists of the front, Centre & rear panel shall be made out of 20SWG thick C.R.C.A. Prime quality Mild Steel & designed to take the load of shelves. DRIVE COVER PANEL : Made out of 22SWG thick C. R.C. A. prime quality Steel to cover the entire drive mechanism. CENTRE PARTITION : The Centre partition will comprise of a full C.R.C.A. prime quality Mild Steel 22SWG Sheet. LOCKING : System will be provided with individual rack locking as well as centralised locking arrangement on the last unit when all units are brought together, central lock when operated gets locked with the floor & does not allow access to the units. DRIVE MECHANISM : Driving Mechanism will be provided externally supported on special grade anti-friction bearing to have smooth & effortless movement. Entire mechanism or gear & sprockets shall be incorporated within the front panel provided in the front of the unit within an area of 1000 millimetre x 200 millimetre x 60 millimetre . DRIVING WHEEL : Fully Powder Coated three pronged drive wheel for better torque & free movement of the rack over the guide rail. INDEXING ARRANGEMENT : Acrylic card holders provided on the front panel for easy identification & retrieval. FINAL FINISH : Powder Coating (8 tanks process with 70 microns).

F) Furniture

ITEM No. 197 :- Wardrobe with Mirror @ 900LX 600DX 1965H : Providing and Fixing Wardrobe with Mirror of size 900LX 600DX 1965H The wardrobe side panels and doors are made up of 18 millimetre thick Prelam Particle Board with both side decorative laminate. All exposed edges are sealed with 2 millimetre thick PVC edge Banding. The shelves are made of 18 millimetre thick Prelam Particle Board with decorative laminate on both sides. The top is made of 36 millimetre prelam particle board with decorative laminate on both sides. (18 millimetre Prelam Particle board and 18mm batons on all sides to achieve 36 millimetre overall thickness). The exposed edges of the top are sealed with 2 millimetre thick PVC edge Banding. The top most part of the wardrobe has an aluminum hanger rod of EBCO make. One drawer of size 400(W) x 150(H) x 450 (D) made of 18mm thick prelam Particle Board has been considered. The drawer will have a multipurpose lock of EBCO premium make. The wardrobe handles are Satin SS finish of 160mm pitch. The wardrobe has a multipurpose lock of EBCO make. All hinges considered are Hettich make. Necessary good quality hardwares have been considered as required.

F) Furniture

ITEM No. 198 :- Kitchen Trolley Providing and Fixing stainless steel kitchen trolley of overall 26 " height and 22" depth,supported on aluminium pipes, trolley basket made out of 5 millimetre stainless steel rod fitted on telescopic channel of size 1.5 " x 20 " x 22 " on both sides of trolley of 12 " or above size, panel having 40 Kilogram load bearing capacity of trolley made out of 20 millimetre PUC coated plywood and colour combination as directed by E-I-C. Inner side of panel covered by white mica, 100 millimetre stainless steel decorative handle. (The width and height of individual compartments shall be kept as directed by Engineer-in-charge). (Material including all lead and lifts)

F) Furniture

ITEM No. 199 :- Stool for Lab and Class-IV : Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 millimetre Outer dimension mild steel Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw as per design and drawing and instructions of Engineer in charge. (Material including all lead and lifts)

F) Furniture

ITEM No. 200 :- Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etcetera, complete.

G) Dismantling

ITEM No. 201 :- Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etcetera

G) Dismantling

ITEM No. 202 :- Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etcetera complete.

G) Dismantling

ITEM No. 203 :- Dismantling flat wooden or A.C. Sheet ceiling with frame work including stacking the materials as directed with all leads, lifts etcetera complete.

G) Dismantling

ITEM No. 204 :- Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etcetera.

G) Dismantling

ITEM No. 205 :- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etcetera complete

G) Dismantling

ITEM No. 206 :- Removing doors and windows with frames and stacking the materials as directed with all leads, lifts etcetera complete.

G) Dismantling

ITEM No. 207 :- Recovering the charges for the useable material available after the dismantling of the building etcetera at the specified rate in the aggreement (Fixed Rate).

G) Dismantling

TOTAL : I) Civil Work

II) Electrical Work

i) Internal Electrical Installation

ITEM No. 208 :- PVC Conduit 25 mm (1.1.9) Supplying and erecting HMS PVC conduit FRLS grade 25 mm dia. with necessary accessories in wall / floor with chiselling appropriately as per specification No: WG-MA / CC.

ITEM No. 209 :- PVC Conduit 25 mm (1.1.10) Supplying and laying HMS PVC conduit FRLS grade 25 mm dia with necessary accessories in RCC work / false ceiling / false flooring as per specification No. WG-MA / CC.

ITEM No. 210 :- PVC Conduit 32 mm (1.1.11) Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with necessary accessories in wall / floor with chiselling appropriately as per specification No: WG-MA / CC.

ITEM No. 211 :- PVC Conduit 32 mm (1.1.12) Supplying and laying HMS PVC conduit FRLS grade 32mm dia. with necessary accessories in RCC work / false ceiling / false flooring as per specification No. WG-MA / CC.

ITEM No. 212 :- Mains 1x1.5 sq.mm (1.3.1) Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA / BW

ITEM No. 213 :- Mains 2x1.5 sq.mm (1.3.1) Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA / BW

ITEM No. 214 :- Mains 1x2.5 sq.mm (1.3.2) Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA / BW

ITEM No. 215 :- Mains 2x2.5 sq.mm (1.3.2) Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA / BW

ITEM No. 216 :- Mains 1x4 sq.mm (1.3.3) Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA / BW

ITEM No. 217 :- Mains 2x4 sq.mm (1.3.3) Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA / BW

ITEM No. 218 :- Mains 1x6 sq.mm (1.3.4) Supplying and erecting mains with 1x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA / BW

ITEM No. 219 :- Mains 4x6 sq.mm (1.3.4) Supplying and erecting mains with 4x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places. as per specification No: WG-MA / BW

ITEM No. 220 :- Mains 1x10 sq.mm (1.3.5) Supplying and erecting mains with 1x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA / BW

ITEM No. 221 :- Mains 4x10 sq.mm (1.3.5) Supplying and erecting mains with 4x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA / BW

ITEM No. 222 :- Modular Switch 6 A (1.6.1) Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 223 :- Modular Switch 16 A (1.6.2) Supplying and erecting modular type switch 16A duly erected on provided plate and box with wiring connections complete.

ITEM No. 224 :- Modular Socket 6A (1.6.10) Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 225 :- Modular Socket 16A (1.6.11) Supplying and erecting modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 226 :- Modular Step Regulator (1.6.23) Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

ITEM No. 227 :- 1 Module (1.6.34) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 1 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 228 :- 2 Module (1.6.35) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 2 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 229 :- 3 Module (1.6.36) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 3 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 230 :- Double Mounting Plate (1.6.38) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 6 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 231 :- Modular Switch Box 12 Module (1.6.40) Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background.

ITEM No. 232 :- SPMCB (1.6.44) Supplying and erecting 6 to 32 A, 10kA, SPMCB suitable to fix in 1 module of modular switch in provided box complete and duly concealed with necessary material and connected.

ITEM No. 233 :- Point Wiring (1.7.5) Point wiring for light / bell concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW / CW

ITEM No. 234 :- Point Wiring (1.7.6) Point wiring for ceiling fan concealed type in min 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW / CW

ITEM No. 235 :- Lt. / Bell Hybrid Point (1.7.15) Point wiring for light / bell hybrid type (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW / HW

ITEM No. 236 :- Fan Point (1.7.16) Point wiring for ceiling fan (Surface type under false ceiling and concealed type for drops and switch boards on walls) in min 20 mm PVC conduit / casing n capping with 1.5 sq.mm. (2+1E) FRLSH grade copper wires, modular type switch, earthing and required accessories as per specification No: WG-PW / HW

ITEM No. 237 :- Light Point (1.7.19) Point wiring for light / bell / exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW / SW

ITEM No. 238 :- Fan Point (1.7.20) Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW / SW

ITEM No. 239 :- Plug on board (1.7.26) Wiring for plug on board with Switch socket surface / concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW / CW

ITEM No. 240 :- LED down Lighter (2.1.4) Supplying and erecting LED square / circular Max. 14 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 241 :- LED Panel Light (2.1.8) Supplying and erecting LED Panel Light(600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min 4200 Lumens, min. efficacy of 120 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty.

ITEM No. 242 :- Bulk Head Fitting (2.1.15) Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 243 :- LED Fitting (4 Feet) (2.1.18) Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22W with high transitivity diffuser with system lumens output of Min.2200 lumens , min. efficacy of 100 lumen / W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 244 :- LED Street Light fitting 60 w. (2.4.5) Supplying and erecting integrated LED street light fitting 60W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen / W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF / FLS2.

ITEM No. 245 :- Street Light Bracket (2.7.4) Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT / WB

ITEM No. 246 :- Eshaust Fan (2.10.14) Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body and blades, wire mesh, duly erected, complete.

ITEM No. 247 :- B.L.D.C. Ceiling fan (2.10.22) Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM / W) of Min. 8 , PF>0.9, THD<10% without IR remote control / compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN / CF (Without Remote )

ITEM No. 248 :- Fan Hook (2.11.4) Supplying and erecting fan hook of 10 mm. M.S. round bar grouted in RCC slab with making the site as original.

ITEM No. 249 :- Water Cooler 150 Litres (3.3.10) Supplying, erecting, testing and commissioning self contained water cooler 230 / 250V 50Hz nominal cooling capacity of 150 litres per hour and storage capacity 150 litres with partially stainless steel body as per specification no. AP-WCR / WC

ITEM No. 250 :- Water Purifier (3.5.1) Supplying and erecting ultra violet storage type water purifier (RO+UV+UF) with softener for safe drinking water consisting of UV germicidal tube of 8W capacity choke made of copper wire and two indicator lamps with output of purified water minimum 0.33 litre / min with activated carbon filter and softener operating on 230V, single phase A.C. supply with UV fail and filter change indication system .(for TDS more than 200)

ITEM No. 251 :- SPMCB 6 A to 32 A (5.3.2) Supplying, erecting and marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 252 :- SPMCB 6 A to 32 A (5.3.3) Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 253 :- TPMCB 6 A to 32 A (5.3.10) Supplying, erecting and marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 254 :- TPMCB 40 A to 63 A (5.3.11) Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 255 :- TPNDB (5.4.5) Supplying and erecting triple pole and neutral distribution board (TPNDB), SP / TP MCBs total 8 ways / 24 poles, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame (vertical busbar type) as per specification no. SW-SWR / MCBDB

ITEM No. 256 :- TPNDB 8 Way (5.4.16) Supplying and erecting triple pole and neutral distribution board (TPNDB), 3 pole / 4 pole MCCB as incomer and outgoing SP MCB (24 poles) or TP MCB of 8 ways (24 poles), with door, 1.2mm thickness, surface / flush mounted, on iron / GI frame (vertical busbar type) as per specification no. SW-SWR / MCBDB1

ITEM No. 257 :- MCCB 04 Pole (5.5.1) Providing and erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR / MCCB

ITEM No. 258 :- MCCB 4 Pole (5.5.3) Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR / MCCB

ITEM No. 259 :- RCCB 4 Pole (5.6.5) Supplying, erecting and commissioning 4 pole RCCB 40A, electromagnetic type with 30 / 100 / 300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB / RCCB

ITEM No. 260 :- RCCB 4 Pole (5.6.6) Supplying, erecting and commissioning 4 pole RCCB 63A, electromagnetic type with 30 / 100 / 300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB / RCCB

ITEM No. 261 :- MCCB D.B. 6 way (5.7.3) Providing and erecting floor / wall mounting, MCCB panel board, with door, suitable for four pole incoming 250A, 6 ways four pole outgoing, up to 100 A MCCBs on iron frame, as per specification no SW-SWR / MCCBPB. (Excluding MCCBs)

ITEM No. 262 :- Cable Alleys (5.7.13) Providing and erecting incoming and outgoing cable alleys suitable for MCCB panel board with door, 250A incoming and 6 way outgoing or 400A incoming and 4 way outgoing made from CRCA sheet 1.6 mm thick duly powder coated and having vertical insulated partition for shielding between the shared face of cableway and DB.

ITEM No. 263 :- Prewired Meter (5.7.17) Providing and erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter.

ITEM No. 264 :- MCCB Enclosure (5.11.17) Supplying and erecting SS enclosure for MCCB suitable for up to 100A MCCB.

ITEM No. 265 :- Iron Work (6.1.19) Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 266 :- G.I. Pipe 150 mm (7.6.5) Supplying and laying (including excavation) reinforced cement concrete pipe of IS 458:2003 NP-2 class of 150 mm internal diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete.

ITEM No. 267 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification no. EA-EP

Lan, Telephone and C.C.T.V. System

ITEM No. 268 :- Telephone Socket (1.6.15) Supplying and erecting modular type telephone socket one gang with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 269 :- 2 Pair Telephone Cable (1.8.1) Supplying and erecting 2 pair telephone copper cable 0.5 mm dia. with high density polyethylene insulation, polyester taped, Nylon Rip Cord and grey colour sheathed with FR PVC, conforming to ITD specification S / WS 113C laid in provided PVC casing capping / conduit as per specification No. WG-TW

ITEM No. 270 :- 10 Pair Telephone Cable (1.8.13) Supplying and erecting 10 pair, 0.5 mm dia. jelly filled armoured telephone copper cable with poly-al laminate moisture barrier, polythene sheathed, G.S.Tape armoured polythene jacketed having laid in provided trench as per specification No. WG-TW

ITEM No. 271 :- 10 M HDMI Cable (1.8.23) Supplying and erecting 10m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male / female 19 pin HDMI connectors complete.

ITEM No. 272 :- MDF Box (1.9.1) Supplying, erecting and commissioning MDF Box 50x50 pairs made from min. 1.5mm thick MS sheet as per specification no. WG-TW

ITEM No. 273 :- 10 Pairs Junction Box (1.9.11) Supplying, erecting and commissioning 10 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TW

ITEM No. 274 :- 10 Pairs Connection (1.9.18) Supplying, erecting and commissioning 10 pair module for connection and disconnection of telephone cable as per specification no. WG-TW

ITEM No. 275 :- (1.9.26) Supplying and installing, testing and commissioning of digital (hybrid) type EPABX of 6 x 32 extensions suitable upto 96 extensions complete.

ITEM No. 276 :- Telephone Instrument (1.9.28) Supplying, installing, testing and commissioning push button telephone instrument desk top unit as per specification complete

ITEM No. 277 :- Telephone Instrument (1.9.29) Supplying, installing, testing and commissioning push button telephone instrument desk top / wall mount with caller ID and Speaker unit as per specification complete.

ITEM No. 278 :- Cat-6 Cable (1.10.1) Supplying and installing cat-6 cable suitable for networking as per specification no. WG-COC / NC

ITEM No. 279 :- Patch cord (1.10.16) Supplying and fixing 1 m UTP patch cord of Cat 6 type in position as per specification No. WG-COC / PC

ITEM No. 280 :- 24 Ports Switch (1.11.4) Supplying, fixing, and configuring 24 ports with 4 (SFP+) port, ethernet managed switch with web view / CLI, 6KV surge protection on ethernet port and console port for management in provided rack as per specification no. WG-NWC / GBS

ITEM No. 281 :- Tool-Less (1.12.4) Supplying and fixing 24 port patch panel with tool-less keystone jacks in provided U Rack complete as per specification no. WG-NAS / PP

ITEM No. 282 :- 9 U Wall Mount Rack (1.12.18) Supplying and fixing 9U wall mount rack (Dimension-DxWxH – 500x600x500 mm) as per specification No. WG-NAS / RAK

ITEM No. 283 :- RJ-45 (1.12.1) Supplying, installing and testing UTP connector (RJ-45) as per specification No. WG-NAS / UTPC.

ITEM No. 284 :- Tool-Less (1.12.2) Supplying and fixing tool-less IO (Ethernet) flush / surface type in provided modular box as per specification no. WG-NAS / IO

ITEM No. 285 :- Supplying and erecting of High definition 4 / 5 Megapixel IP IR Bullet Camera with following features Image Sensor : minimum 1 / 2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m,

Lens Type : 2.8 / 4 / 6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black and White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC and PoE, IP67, IK10 - Vandal Resistant. Built in micro SD / SDHC / SDXC card slot of minimum 128 GB, Built in microphone. minimum Input / Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day / Night-Auto (ICR) / Color / Black and White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH / Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL / TLS, TCP / IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL / EN OR equivalent BIS / TECH / STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall / ceiling / false ceiling / provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM

ITEM No. 286 :- Supplying and erecting of High definition 4 / 5 Megapixel IP IR Dome Camera with following features Image Sensor : minimum 1 / 2.8" Progressive Scan CMOS, Video Resolution : minimum 2592 x 1520 Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions, WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, Lens Type : 2.8 / 4 / 6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129° 4 mm, horizontal FOV 86°, vertical FOV 47°, diagonal FOV 102° 6 mm, horizontal FOV 55°, vertical FOV 29°, diagonal FOV 65° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black and White, 0.0 Lux (IR) Night Vision Distance minimum IR - 50m. Camera minimum Adjustment Angles - Pan : 350°, Tilt : 72°, Rotate : 350°. Power Supply : Support 12VDC and PoE, IP67, IK10 - Vandal Resistant. Built in micro SD / SDHC / SDXC card slot of minimum 128 GB, Built in microphone. minimum Input / Output - Audio in × 1, Audio Out × 1, Alarm in × 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. Image Enhancements : Day / Night-Auto (ICR) / Color / Black and White, 3D Digital Noise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation, Highlight Compensation. Events : Privacy Masking, Motion detection, Scene change detection, Face capture, Video tampering, audio exception detection, Region entrance detection, Region exiting detection. Operating temperature ( -30 to 60° C ). Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES - 256, SSH / Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL / TLS, TCP / IP, Secure Real-Time Transport Protocol (SRTP), Bonjour, SNMP and Secure shell (SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL / EN OR equivalent BIS / TECH / STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall / ceiling / false ceiling / provided pole (mounting height not more than 5 meter) etc with all accessories etc complete as per specification no. CCTV-CAM.

ITEM No. 287 :- Supplying, installing, testing and commissioning of 32 / 40 Ch. Network Video Recorder (NVR), suitable connect Min. 32 IP Cameras, up to 5 Megapixel Resolution, with HDMI / VGA outputs, provided HDMI output of 4K resolution or VGA output with output up to 1920 × 1080. Support H.265 or higher, H.264, MJPEG, Incoming Bandwidth 250Mbps with minimum 4 SATA Hard Disks, ANR Technology, 4 SATA interfaces for 4 HDDs and capacity of each HDD up to 8TB, minimum 02 USB port, Alarm I / O 16 / 4, RJ-45 10 / 100 / 1000 Mbps self-adaptive Ethernet interface, ONVIF conformance, Multiple network monitoring: Web viewer. support protocol TCP / IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programming etc. complete as per specification no. CCTV-NVR

ITEM No. 288 :- Supplying and erecting 8 TB internal Surveillance HDD suitable for SATA Port of NVR, interface transfer rate 6 GB / S, maximum sustained transfer rate 210 MB / Sec to 213 MB / S. Drive bay supported 08+, Cameras supported up to 64, Cache (MB) 256, Load / Unload Cycle -3000000, Work Load Rating per Year 180TB, MTBF 1000000 Hrs. HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD

ITEM No. 289 :- Supplying and erecting 55" professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32 / 64 channel NVR and following features Brightness: minimum 500 Cd / m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178 / 178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In, Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24 / 7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON

Solar Water heater

ITEM No. 290 :- ETC Solar Water Heating System (4.1.9) Supplying, installing, testing and commissioning of ETC solar water heating system without heat exchanger type of 500 LPD capacity with SS water tank of 0.5 mm thickness conforming to IS1239 Part-I :2004 complete as per specification no. ESD-SHWS-ETC

ITEM No. 291 :- Elastomeric (4.2.13) Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 28 mm for solar water heater / AC system.

ITEM No. 292 :- Elastomeric (4.2.15) Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 42 mm for solar water heater / AC system.

ITEM No. 293 :- (4.2.19) Supplying and erecting 25 / 32 mm (ID / OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.2 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP / CPVC

ITEM No. 294 :- CPVC Pipe (4.2.20) Supplying and erecting 32 / 40 mm (ID / OD) Chlorinated polyvinyl chloride pipe (CPVC), thickness 3.8 mm conforming to IS 15778 (CTS Series) with necessary CPVC fittings and solvent cement for Solar Water Heater System as per specification No. ESD-HWP / CPVC

ITEM No. 295 :- Water Tank (4.8.7) Providing and fixing high-density polyethylene (HDPE) container one piece moulded triple layer water tank made out of high density polyethylene and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity up to 20000 litres.

ITEM No. 296 :- Iron Work (6.1.19) Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 297 :- Sluice Valve (16.6.13) Supplying and erecting 25 mm dia. gun metal sluice valve at position with necessary materials complete.

ITEM No. 298 :- Sluice Valve (16.6.14) Supplying and erecting 40 mm. dia. gun metal sluice valve at position with necessary materials complete.

ITEM No. 299 :- Non Return Valve 40 millimetre Diametre (16.6.20) Supplying and erecting non return valve 40 mm dia in position made of gun metal complete.

ii) External Electrical Installation

ITEM No. 300 :- Cable 03 Core Flexible .25 sq.mm. (1.3.15) Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV

ITEM No. 301 :- LED Street Light fitting 40 to 50 w. (2.4.4) Supplying and erecting integrated LED street light fitting 40 to 50W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen / W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF / FLS2.

ITEM No. 302 :- LED Street Light fitting 60 w. (2.4.5) Supplying and erecting integrated LED street light fitting 60W IP65 and IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen / W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF / FLS2.

ITEM No. 303 :- LED Flood Light 155 Watt. (2.4.17) Supplying and erecting integrated LED flood light fitting Max. 155W IP65 and IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen / W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF / FLS2.

ITEM No. 304 :- Post Top lantern (2.5.5) Supplying and erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy and clear acrylic top cover, cast aluminium pole cap on provided pole / bracket as per specification no. FG-ODF / PTL

ITEM No. 305 :- LED Lamp 18 Watt. (2.8.13) Supplying and erecting 18W, 230V integral type LED Lamp suitable for B-22 / E-27 base.

ITEM No. 307 :- SPMCB 0.5A to 5A, (5.3.1) Supplying, erecting and marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 308 :- MCCB 04 Pole (5.5.1) Providing and erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR / MCCB

ITEM No. 309 :- MCCB 4 Pole (5.5.3) Providing and erecting 4 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR / MCCB

ITEM No. 310 :- MCCB 04 Pole (5.5.5) Providing and erecting 4 Pole MCCB 415V, 630A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt / UV / trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure / panel as per specification no. SW-SWR / MCCB

ITEM No. 311 :- Prewired Meter (5.7.17) Providing and erecting prewired meter module suitable for MCCB panel board with CTs and emfs VIF meter.

ITEM No. 312 :- Bus Bar Support (5.10.26) Supplying and erecting porcelain / epoxy bus bar support complete erected in provided M.S. box for 100A

ITEM No. 313 :- Bus Bar Support (5.10.27) Supplying and erecting porcelain / epoxy bus bar support complete erected in provided M.S. box for 200 / 300A

ITEM No. 314 :- Bus Bar Support (5.10.28) Supplying and erecting porcelain / epoxy bus bar support complete erected in provided M.S. box for 400A

ITEM No. 315 :- CRCA Sheet (6.1.1) Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete.

ITEM No. 316 :- (6.1.10) Supplying and erecting hylam sheet / ebonite 6 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete.

ITEM No. 317 :- Iron Work (6.1.19) Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 318 :- (6.2.11) Supplying and erecting of any size electrolyte aluminium patti or bar in bus bar chamber / in panel or any other purpose, 500 V with require capacity 99.9% aluminium purity with E91E Grade as per IS 5082 and Current Density 0.8 A per sq. mm. with fixing arrangement (like lug or bottle type lug) to both the end with high grade polyolefin insulation sleeve complete as per specification no. BCP-BB

ITEM No. 319 :- 11 K.V. H.T. Cubical (6.4.1) Supplying, erecting, testing and commissioning 11KV HT metering cubical (compact / vertical type) approved by MSEDCL / licensee fabricated with 2 mm (14 SWG) M.S. sheets with supporting angle, painted with powder coating / epoxy paint of required shade, copper bus bar size 25 x 6 mm, heavy duty mechanical lock, with counter meter for measuring no of times the opening of meter door, top side cover (CT, PT cover) interlock with meter door, epoxy casted 3 nos. CT having required ratio between 10 / 5A to 50 / 5A, VA10 or 15, Class 0.5S, epoxy casted 3 nos. PT having ratio 11000 / V3 / 110 / V3 VA 50, Class 0.5 suitable for provided trivector meter, and provision for incoming and outgoing cables complete duly tested by licensee with necessary test certificates and erected on provided plinth / cc foundation.

ITEM No. 320 :- Arm.cable 1100 V. 3½ core 300 sq. mm. (7.1.24) Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / AL

ITEM No. 321 :- FR XLPE 4x4 sq.mm. (7.1.26) Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 4 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / AL

ITEM No. 322 :- FR XLPE 4x6 sq.mm. (7.1.27) Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 6 sq. mm. aluminium conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / AL

ITEM No. 323 :- Cable (7.3.2) Supplying , erecting and terminating XLPE insulated, galvanised steel formed wire armoured (strip) cable 11 kV(E), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT

ITEM No. 324 :- Termination Kits (7.5.1) Providing and erecting Heat shrinkable indoor termination kit for 11 kV ( E ) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT / HT

ITEM No. 325 :- Out Door Termination Kit (7.5.5) Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT / HT

ITEM No. 326 :- G.I. Pipe 40 mm (7.6.2) Supplying and erecting G.I. pipe ‘A’ class 40 mm dia. erected for enclosing XLPE armoured cable on wall / pole as per specification no. CB-CE

ITEM No. 327 :- G.I. Pipe 50 mm (7.6.3) Supplying and erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall / pole as per specification no. CB-CE

ITEM No. 328 :- G.I. Pipe 75 mm (7.6.4) Supplying and erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall / pole as per specification no. CB-CE

ITEM No. 329 :- D.W.C. Pipe 50 mm (7.6.9) Supplying and laying (including excavation of suitable width and depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 330 :- D.W.C. Pipe 146 mm (7.6.13) Supplying and laying (including excavation of suitable width and depth up to 90 cm) 146 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground / road surface, to required depth complete.

ITEM No. 331 :- FRP Box (7.8.9) Supplying and erecting FRP box of size 250mm x 200mm x 100 mm, 2.7 mm thick complete on pole / wall as per specification No. CB-SB

ITEM No. 332 :- Girder Pole (8.1.13) Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg / m) with base plate in provided foundation as per specification no. OH-PL / RSJ

ITEM No. 333 :- High-Mast 12.5 Metres (8.2.1) Supplying and erecting 12.5 m (clear height) motorized high-mast (Top -150mm, Bottom- 360mm) hot dipped galvanized material with average minimum thickness 65 micron, made from high tensile structure grade steel as per BSEN - 10025 S 355 / E350 and 3mm thickness, with base plate 25 mm thick x OD 520 mm grade as per IS-2062, pole made in single section and submerge arc welded, with lowering and raising motorized unit, wire rope stainless steel 316 grade 2 nos., 7x19 construction 5mm, SG-DG U clamps, double drum with assembly 250 kg, 5x2.5 Sq.mm. flexible copper cable with lantern carriage assembly suitable for max. 12 nos. luminaires and its control gear box, lightning arrestor, arrangement for fixing aviation light, high-mast with serial number, factory inspection report / test report of high-mast should be provided as per specifications on provided foundation J type stud / bolts with necessary accessories complete as per specification no. OH-PL / HM (excluding luminaries)

ITEM No. 334 :- Octagonal Pole 6 Metres (8.2.12) Providing and erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A / F, top 70 mm A / F on provided foundation as per specification no. OH-PL / OPL

ITEM No. 335 :- Octagonal Pole 08 Mtr (8.2.15) Providing and erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A / F, top 70 mm A / F on provided foundation as per specification no. OH-PL / OPL

ITEM No. 336 :- Sword Type Bracket (8.2.21) Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL / PBKT

ITEM No. 337 :- Feeder Pillar (8.2.23) Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise / lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete.

ITEM No. 338 :- (8.3.11) Supplying and erecting 100 x 50 x 6 mm with 4.7 mm thick web and 7.5 mm thick flange channel iron cross arm of suitable length for 2.4 m wide DP structure and erecting on DP with 50 X 6mm clamp complete as per specification no. OH-PL / BKT

ITEM No. 339 :- ACSR Conductor (8.4.7) Supplying and erecting ACSR conductor of size 6 / 1-2.59 mm complete. (Weasel) (127.7 kg / km) as per specification No. OH-CON / ACSR

ITEM No. 340 :- Disc Insulator (8.5.6) Supplying and erecting porcelain disc type insulator 45KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS / DI

ITEM No. 341 :- Pin Insulator (8.5.9) Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS / PN

ITEM No. 342 :- Lightening Arrester (8.5.15) Supplying and erecting distribution class, 11 kV thyrite type lightening arrester with nut bolts, on provided MS channel as per specification no. OH-INS / LA

ITEM No. 343 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification no. EA-EP

ITEM No. 344 :- Copper earth Plate (9.1.2) Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing and recording the results as per specification no. EA-EP

ITEM No. 345 :- Pipe Type Earthing (9.1.4) Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP

ITEM No. 346 :- Transformer 315 KVA (10.1.7) Supplying, installing, testing and commissioning 3 phase, 11 / 0.433 kV, 50 Hz., 315 kVA, Mineral oil immersed and naturally cooled outdoor type, Copper wound Non-sealed transformer delta / star connected with additional neutral brought out on load side, temperature rise should not exceed 45℃ by thermometer in oil and 50℃ by the resistance method in winding at full load rating, using type A winding insulation (kraft paper) with HV tapping (with off load tap changer) off load +5 to -10 in steps of 2.5%,+5 to -10 in steps of 2.5%, having 7 number of tap positions with standard accessories complete with test certificate with losses below 1025 Watts at 50% load, 3100 Watts at 100% load as per IS:1180 (part 1) : 2014 with necessary permissions of Electrical Inspector, as per specification no SS- TR-NSL.

ITEM No. 347 :- D.G. Set 250 KVA (11.1.18) Supplying, erecting, testing and commissioning of diesel generating set with alternator of 250 kVA output continuous rating, 3 Phase, 415 V, 50c / s 0.8 p. f. A.C supply, a totally enclosed air cooled / liquid cooled multi-cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self-regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation + / - 5 %, with performance class G2 and maximum fuel consumption 42.30 Ltr / hr @75% loading. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears, indicators connected with suitable wires / cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m, provided with first filling of oil, diesel not less than 425 Ltr etc. on provided M20 Grade CC Foundation and obtaining necessary approval from Electrical Inspector as per specification no. GEN-DG

ITEM No. 348 :- AMF Panel (11.2.15) Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 200 kVA up to 250 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF.

ITEM No. 349 :- Excavating (16.1.5) Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe and clearing the site by removing debris and making the site as required complete.

ITEM No. 350 :- Brick Masonry (16.2.1) Providing and making second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in foundation sand plinth of inner walls / in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete.

ITEM No. 351 :- R.C.C. (16.2.4) Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete of medium duty (100 Kilogram).

ITEM No. 352 :- Transformer Plinth (16.3.1) Making transformer plinth (1.5 x 1.5 x 1.5) m in size with necessary excavation in ground with 150 mm. thick M- 10 PCC at the bottom and top and 250 mm. thick, burnt brick wall constructed at periphery and remaining hollow portion shall be filled with 40 millimetre hard broken aggregate. External surface duly plastered by 12 mm thick including watering etcetera complete.

ITEM No. 353 :- C.C. Foundation (16.3.4) Making cement concrete foundation including excavation (60 x 60) cm x deep 1 / 6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45 cm x 45 cm x 45 cm / 45 cm dia. x 45 cm. height plinth duly plastered, with necessary curing and finishing complete. (for above 9 m poles)

ITEM No. 354 :- C.C. Foundation (16.3.7) Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

ITEM No. 355 :- C.C. Foundation for Pole (16.3.9) Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T / sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal / conical GI pole).

ITEM No. 356 :- C.C. Foundation (16.3.12) Making M- 20 cement concrete foundation by considering the safe soil bearing capacity at site as 10 T / sq. m at 2 m depth including excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 12.5 m raising lowering high mast).

Water Pump

ITEM No. 357 :- PVC Trunking 32 mm (1.2.8) Supplying and erecting PVC trunking (PVC casing-n-capping) of size 32 mm with accessories on wall / ceiling as per specification No: WG-MA / CON.

ITEM No. 358 :- Change Over Switch (5.1.1) Supplying and erecting four pole ON LOAD change over switch, 415V, 32A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS / IEC 60947-3 Part-1 / 3 .

ITEM No. 359 :- TPMCB 40 A to 63 A (5.3.11) Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 360 :- FPMCB 40 A to 63 A (5.3.13) Supplying, erecting and marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 361 :- D.P. MCB (5.4.13) Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB / TP MCB / FP MCB / RCCB / RCBO complete erected on angle iron / GI frame.

ITEM No. 362 :- Plywood 12 mm (6.1.12) Supplying and erecting plywood 12 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete.

ITEM No. 363 :- Iron Work (6.1.19) Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

ITEM No. 364 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification no. EA-EP

ITEM No. 365 :- (12.1.1) Supplying and erecting Minimum three and above star rated Centrifugal water pump (Monoblock), 230V, Single phase 50 cycles A.C. supply of 0.375 kW / 0.5 HP with discharge 36 / 9 Litres per Minute (LPM) for head of 6 / 21m and 25 mm suction / 25 mm delivery pipe on provided C.C. foundation as per specification No. WP-CGP

ITEM No. 366 :- Submersible Pump (12.2.19) Supplying and erecting minimum Three and above star rated submersible pump set of 4.5 KW / 6 HP with 415 V, 50 c / s AC supply suitable for 150 mm dia. borewell suitable for 60 to 180 LPM discharge at 177 to 88 m head and discharge and delivery pipe of Size-50 mm diameter with a necessary H type clamps as per specification No. WP-SMP

ITEM No. 367 :- Flat Flexible 3x4 sq.mm. Cable (12.4.9) Supplying and erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete.

ITEM No. 368 :- Automatic Control Panel (12.4.17) Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible / centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc .

ITEM No. 369 :- G.I. Pipe 50 mm (16.5.6) Supplying and erecting ISI mark GI pipe 50 mm dia.‘B’ class at position with accessories complete as per specification no. CW-PLB / GP.

ITEM No. 370 :- Non Return Valve 50 mm Dia (16.6.21) Supplying and erecting non return valve 50 mm dia in position made of gun metal complete.

iii) Fire Hydrant, Sprinkler System, Smoke Detection and fire Alarm System

ITEM No. 371 :- Non C.S.R. Supplying and erecting ABC powder type fire extinguisher as per IS:13849 / 15683 of 6 Kg. Capacity with necessary clamp for erection on wall (Rates are taken from previalsuly sanctinet estmate No. 121058 / 23-24 Sanctaned Letter No. 1673 date 01.09.203)

ITEM No. 372 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification no. EA-EP

ITEM No. 373 :- Amplifier (13.11.1) Supplying, erecting, testing and commissioning 120 W amplifier suitable to operate on 230 Volts A.C. / 12 Volts D.C. supply complete as per specification no. FF-PA / AFR

ITEM No. 374 :- Sound Column (13.11.2) Supplying, erecting, testing and commissioning 15 to 30 Watts sound column or ceiling mounted complete as per specification no. FF-PA / SOC

ITEM No. 375 :- Microphone (13.11.3) Supplying, erecting, testing and commissioning stand mounted / handheld type wired microphone having 2 mV / Pa sensitivity, impedance level limit 300 ohms and 50 - 16000 Hz suitable to operate in -10 deg C to +55 deg C with min. 7 metre shielded cable and 3 Pin Professional XLR Connector, stereo jack complete as per specification no. FF-PA / MIC

ITEM No. 376 :- Microphone Table Stand (13.11.5) Supplying, erecting, testing and commissioning rust free microphone table stand of chrome plating / powder coating or S.S. material, up to 500 mm height and suitable base for sturdy mechanism ensuring trouble free movement complete.

ITEM No. 377 :- 2 Core Shielded Cable (13.11.6) Supplying, erecting, testing and commissioning of 2 core shielded cable complete as per specification no. FF-PA / MCC

ITEM No. 378 :- Speaker wire (13.11.9) Supplying, erecting, testing and commissioning of 1.0 sq. mm speaker wire complete.

ITEM No. 379 :- Core Cutting (3.11.77) Carrying out core cutting of size 3" to 5" dia x 15" length in the C.C. / rock / stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original.

ITEM No. 380 :- Main Fire Pump (13.1.1) Supplying, installation, testing and commissioning of main fire pump (MFP / EP) suitable for water discharge of 1400 to 1600 LPM at 60 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 22kW or of suitable kW capacity for manual / automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal / split casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required.(d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP / SSC / EP

ITEM No. 381 :- Jockey Fire Pump (13.2.1) Supplying, installation, testing and commissioning of jockey fire pump (JP) suitable for water discharge of 180 to 240 LPM at 70 to 50 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual / automatic operation and consisting of following : (a) Horizontal / vertical type, multi stage, centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP / JP

ITEM No. 382 :- Booster fire Pump (13.3.1) Supplying, installation, testing and commissioning of booster fire pump [BP] suitable for water discharge of 450 LPM at 35 m head driven by electric motor 415 volts, 3 phase 50 Hz, AC supply of 5.5 kW or of suitable kW capacity for manual / automatic operation and consisting of following : (a) Horizontal / vertical type, single / multi stage, centrifugal casing pump of cast iron body and bronze / CI impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Squirrel cage induction motor, TEFC, synchronous speed 3000 RPM, suitable for operation with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP / BP

ITEM No. 383 :- Main Fire pump (13.4.1) Supplying, installation, testing and commissioning of main fire pump (MFP / DP) suitable for water discharge of 1600 to 1800 LPM at 70 to 50 m head driven by 45 HP or suitable HP capacity diesel engine at required working speed suitable for manual / automatic operation and consisting of following : (a) Horizontal type, single stage, centrifugal casing pump of cast iron body and bronze impeller with stainless steel shaft (SS410 grade), mechanical seal conforming to IS 1520. (b) Water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 / 24 volts DC electric starting equipment with battery of required AH capacity with necessary charger suitable to work on 230v, 50Hz AC supply, diesel tank of minimum 150ltr capacity with first filling of diesel up to 100% level with necessary piping with valves up to engine, exhaust pipe extended up to 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications etc. as required. (c) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Erected on provided suitable size cement concrete foundation duly plastered with anti vibration pads with perfect aligning, proper levelling complete pump set with engine assembly and accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003) complete, as per specification no. FF-MFP / SSC / DP

ITEM No. 384 :- Fire Pump Control Panel (13.5.1) Supplying, erecting, testing and commissioning of fire pump control panel (FCP) of cubical construction, floor mounted type, fabricated from minimum 2 mm thick CRCA sheet, compartment-alised with hinged lockable doors, with enclosure protection class IP54, duly powder coated or painted with accessories duly painted with two coats of synthetic enamel paint of fire red colour over a coat of primer (ISC code 536 as per IS 2932 of 2003), cable alley, interconnection with suitable size solid copper busbar strip of adequate size for all power connections having switchgears and accessories, mountings and internal wiring with adequate size copper conductor cable, earth terminals, numbering etc. complete in all respect, suitable for satisfactory operation of main fire pump and jockey (pressurisation) pumps (1working+1standby) with necessary accessories, wiring and cabling along with allied accessories with following incoming and outgoings, suitable for automatic and manual operation on 415V, 3 phase, 50Hz ac supply as per specifications the capacity of electric motor driven pump are as follows a. Main fire pump(MFP) having capacity of 22kW 1no (1 working) b. Jockey pump(JP) capacity of suitable capacity 2 nos(1 working +1 standby, alternate run per start in auto mode) comprises of the following features and switchgears: 1. Main incomer FP SFU having rotary handle with HRC fuses of suitable rating. 2. Electrolytic grade copper strips for busbar of suitable sizes for main incomer and branches to motor SFU's, starters and outgoing terminals with necessary accessories like stainless steel nut bolts with spring washers for connections, mounted on required no of epoxy or porcelain support insulators of suitable ratings etc. 3. Individual pump TPN SFU having rotary handle with HRC fuses of suitable rating.

For addition of fire sprinkler system to basic fire hydrant system control panel(FCP) which includes one main electric motor driven fire pump MFP (1working) having __kW capacity and relevant capacity jockey pumps, add as follows in the basic cost of Item no 13-5-1 towards increased capacity switchgears busbar and additional motor starters for main and jockey pumps along with necessary accessories with software and hardware for main and jockey fire pumps additional Sprinkler system MFP=(1working)@22kW, JP = (1working + 1standby, alternate run per start in auto mode) @ relevant capacity

ITEM No. 385 :- For main electric motor driven fire sprinkler system pump of 22kW capacity (1Working) and relevant capacity jockey pumps (1working+1standby, alternate run per start in auto mode,

ITEM No. 387 :- G.I. Pipe ERW 25 mm (13.6.2) Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings complete as per specification no. FF-PP

ITEM No. 388 :- G.I. Pipe ERW 65 mm (13.6.4) Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings complete as per specification no. FF-PP

ITEM No. 389 :- G.I. Pipe ERW 100 mm (13.6.6) Supplying and erecting G.I. pipe ‘C’ class ERW 100 mm dia with necessary fittings complete as per specification no. FF-PP

ITEM No. 390 :- G.I. Pipe ERW 150 mm (13.6.7) Supplying and erecting G.I. pipe ‘C’ class ERW 150 mm dia with necessary fittings complete as per specification no. FF-PP

ITEM No. 391 :- (13.6.9) Providing coating of bitumen paint and 4mm thick wrapping for underground 100 mm ring main of fire fighting system.

ITEM No. 392 :- (13.6.10) Providing coating of bitumen paint and 4mm thick wrapping for underground 150 mm ring main of fire fighting system.

ITEM No. 393 :- Butterfly Valve 100 mm (13.7.20) Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL / BFV

ITEM No. 394 :- Butterfly Valve 150 mm (13.7.21) Supplying and erecting 150 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL / BFV

ITEM No. 395 :- NRV 100 mm dia (13.7.24) Supplying and erecting 100 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL / NRV

ITEM No. 396 :- NRV 150 mm dia (13.7.25) Supplying and erecting 150 mm dia cast iron double flange NRV complete with PN16 pressure rating, as per specification no. FF-VL / NRV

ITEM No. 397 :- Gate Valve (13.7.32) Supplying and erecting 25 mm dia gun metal gate valve complete with PN16 pressure rating, as per specification no. FF-VL / GV

ITEM No. 398 :- Hydrant Valve (13.7.35) Supplying and erecting stainless steel single outlet hydrant valve fitted with necessary accessories complete as per specification no. FF-VL / HV

ITEM No. 399 :- Fibre Water Tank (13.8.1) Supplying and installing one piece moulded HDPE / fibre water tank for negative suction only, having capacity 1000 litres fitted with necessary accessories complete as per specification no. FF-FFA / PT

ITEM No. 400 :- Hose reel (13.8.2) Supplying and installing wall mounting swinging hose reel drum fitted with 19 mm dia. 30m long high pressure polypropylene (Polyhose) along with necessary accessories complete as per specification no. FF-FFA / HV

ITEM No. 401 :- R.R.L. (13.8.4) Supplying and erecting 63mm dia, reinforced rubber lined (R.R.L.) hose pipe, 15m in length, fitted with necessary accessories complete as per specification no. FF-FFA / RRL

ITEM No. 402 :- Nozzle (13.8.8) Supplying and erecting stainless steel branch pipe 63 mm dia fitted with 20 mm dia detachable hexagonal nozzle complete as per specifications no. FF-FFA / NZ

ITEM No. 403 :- Fire Brigade Header 150 mm (13.8.10) Supplying and erecting 150 mm dia fire brigade header suitable for supplying water in fire tank complete as per specification no. FF-FA / FBC

ITEM No. 404 :- Siamese Connection (13.8.11) Supplying and erecting fire brigade header ( Siamese connection )of 150 mm dia, for supplying water in fire tank complete as per specification no. FF-FA / FMC

ITEM No. 405 :- Air Release Cock (13.8.13) Supplying and erecting 20 / 25mm dia gun metal air release cock, with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA / ARV

ITEM No. 406 :- Pressure Gauge (13.8.14) Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kg per cm square fitted with 12 / 15 mm dia. pad cock valve, erected with provided G.I. pipe, elbow etc. complete as per specification no. FF-FFA / PG

ITEM No. 407 :- Pressure Switch (13.8.15) Supplying and erecting 12 / 15 mm dia pressure switch with provided isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA / PS

ITEM No. 408 :- Cabinet (13.8.18) Supplying and erecting M.S. / CRCA cabinet for housing single hydrant valve of size ( 400 x 400 x 400)mm or hose pipe box of size ( 600 x 600 x 200)mm made from min. 1.5 mm thick CRCA sheet with angle iron work of min. of size (25 x 25 x 4) mm having front doors with viewing glass of size (200x150) mm and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour( Code 538 of IS 5)

ITEM No. 409 :- Heat Detector (13.9.1) Supplying, erecting testing and commissioning heat detector with combination "ROR and Fixed Temp." complete as per specification no. FF-FAS / HD

ITEM No. 410 :- Smoke Detector (13.9.3) Supplying, erecting testing and commissioning optical type smoke detector on suitable back box with necessary connections complete as per specification no. FF-FAS / SD

ITEM No. 411 :- Pill Box (13.9.7) Supplying, erecting, testing and commissioning manual call point (Pill box) with break glass push button and flip abort switch or agent release switch in metal enclosure complete as per specification no. FF-FAAS / MCP

ITEM No. 412 :- Hooters (13.9.8) Supplying, erecting, testing and commissioning hooters having high (100dB @ 1m) and low (94dB @ 1m) volume setting, group addressing facility allowing multiple sounders to be activated with CRCA enclosure complete as per specification no. FF-FAAS / HTR

ITEM No. 413 :- (13.9.9) Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28 V dc supply having FR Polymer ABS Housing complete as per specification no. FF-FAAS / RRI

ITEM No. 414 :- Arm. Cable 2x1.5 sq.mm (13.9.10) Supplying, installing, testing and commissioning FR, XLPE armoured cable 2 core 1.5 sq.mm. copper conductor complete erected on wall / ceiling complete as per specification no. CB-LT / CU

ITEM No. 415 :- 02 Zones panel (13.9.14) Supplying, installing, testing and commissioning of 10 Zones Microprocessor based conventional fire alarm control panel (FACP) with standard accessories , 16x2 Character LCD Display, provision for zone wise contact and beep sound alarm, suitable to operate on 120-220 V AC, 0 - 49 Deg C, 93 ± 2 Percentage RH (non- condensing) at 32 ± 2 Deg C complete as per specification no. FF-FAAS / FACP

ITEM No. 416 :- Quartzoid Bulb Sprinkler (13.12.1) Supplying, erecting, testing and commissioning of quartzoid bulb sprinkler, 15 mm (½") dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR.

ITEM No. 417 :- CO2 (13.15.1) Supplying and erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 kg. capacity cartridge type conform to IS 2878 / 15683 complete erected with necessary clamp made from 50 x 6 mm. M. S. flat with nut and bolts routed in wall complete.

ITEM No. 418 :- Excavating (16.1.5) Excavating hard Rock or bituminous road by chiselling for preparing pit for pole / stay / earth plate / for laying cable / pipe and clearing the site by removing debris and making the site as required complete.

ITEM No. 419 :- C.C. Foundation (16.3.7) Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose).

ITEM No. 420 :- Automatic Control Panel (12.4.17) Supplying and erecting automatic control panel for 3 Phase , 415 volt, A.C, Submersible / centrifugal pump set up to 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter / voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc.

iv) Split Type Air Conditioner

ITEM No. 421 :- Split Type A.C. (3.2.11) Supplying, installing, testing and commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 5.00 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall / floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation and temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. APAC / WAC

ITEM No. 422 :- Copper Pipe (3.2.26) Supplying and erecting seamless outside and inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia / size 12mm complete.

ITEM No. 423 :- Copper Pipe (3.2.28) Supplying and erecting seamless outside and inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia / size 22mm complete.

ITEM No. 424 :- Elastomeric (4.2.9) Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 12 mm for solar water heater / AC system.

ITEM No. 425 :- Elastomeric (4.2.12) Supplying and erecting elastomeric nitrile rubber / foam tube type sleeves for coating and insulating on provided PC / copper pipes having 9 mm thickness and inner diameter / sizes 22 mm for solar water heater / AC system.

ITEM No. 426 :- Iron Work (6.1.19) Supplying and erecting iron work, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

v) 10 Passenger Lift and 15 Passnger Cum Stretcher Lift

ITEM No. 427 :- Flexible Conduit (1.2.1) Supplying and erecting 20mm dia. corrugated flexible polypropylene conduit.

ITEM No. 428 :- PVC Trunking 25 mm (1.2.7) Supplying and erecting PVC trunking (PVC casing-n-capping) of size 25 mm with accessories on wall / ceiling as per specification No: WG-MA / CON.

ITEM No. 429 :- Mains 1x1.5 sq.mm (1.3.1) Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA / BW

ITEM No. 430 :- Mains 2x1.5 sq.mm (1.3.1) Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA / BW

ITEM No. 431 :- Ceiling Rose (1.5.7) Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendant holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block / PVC junction box.

ITEM No. 432 :- Modular Switch 6 A (1.6.1) Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete.

ITEM No. 433 :- Modular Socket 6A (1.6.10) Supplying and erecting modular type 3 pin 6A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

ITEM No. 434 :- Modular Step Regulator (1.6.23) Supplying and erecting modular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete.

ITEM No. 435 :- Modular 4 way Box (1.6.29) Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected.

ITEM No. 436 :- Light Point (1.7.19) Point wiring for light / bell / exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW / SW

ITEM No. 437 :- Fan Point (1.7.20) Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW / SW

ITEM No. 438 :- Plug on board (1.7.26) Wiring for plug on board with Switch socket surface / concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW / CW

ITEM No. 439 :- Bulk Head Fitting (2.1.15) Supplying and erecting bulk head LED fitting max. 10W with high transitivity diffuser with system lumens output of min. 1100 lumens, min. efficacy of 110 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., THD<10%, p.f. >0.95, operating range of 140-260V, in built surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 440 :- LED fitting (4 Feet) (2.1.17) Supplying and erecting CRCA powder coated corridor / passage light LED fitting (4 feet) Max. 17W with high transitivity diffuser with system lumens output of Min. 2000 lumens , min. efficacy of 120 lumen / W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty.

ITEM No. 441 :- LED Lamp 10-12 Watt. (2.8.11) Supplying and erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base.

ITEM No. 442 :- Eshaust Fan (2.10.14) Supplying and erecting fresh air cum exhaust fan of light duty 250 V A.C. 50 cycles 225mm. 1400 RPM rust proof body and blades, wire mesh, duly erected, complete.

ITEM No. 443 :- B.L.D.C. Ceiling fan (2.10.22) Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of 28W having service ratio (CMM / W) of Min. 8 , PF>0.9, THD<10% with IR remote control / compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN / CF (Without Remote)

ITEM No. 444 :- SPMCB 6 A to 32 A (5.3.3) Supplying, erecting and marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 445 :- DPMCB (5.3.7) Supplying, erecting and marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 446 :- TPMCB 40 A to 63 A (5.3.11) Supplying, erecting and marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB

ITEM No. 447 :- D.P. Isolator (5.3.14) Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board.

ITEM No. 448 :- SPNDB (5.4.7) Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR / MCBDB

ITEM No. 449 :- D.P. MCB (5.4.13) Supplying and erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB / TP MCB / FP MCB / RCCB / RCBO complete erected on angle iron / GI frame.

ITEM No. 450 :- 02 Pole RCCB (5.6.1) Supplying, erecting and commissioning 2 pole RCCB 16 / 25A, electromagnetic type with 30 / 100 / 300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB / RCCB

ITEM No. 451 :- RCCB 4 Pole (5.6.5) Supplying, erecting and commissioning 4 pole RCCB 40A, electromagnetic type with 30 / 100 / 300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB / RCCB

ITEM No. 452 :- 2 X 2.5 sq. Metres (7.2.8) Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 2.5 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / CU

ITEM No. 453 :- FR XLPE Cable 4 x 10 (7.2.33) Supplying, erecting and terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands and lugs, on wall / trusses / pole or laid in provided trench / pipe as per specification no. CB-LT / CU

ITEM No. 454 :- Plate Earthing (9.1.1) Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing and recording the results as per specification no. EA-EP

ITEM No. 455 :- G.I.Strep (9.2.3) Supplying and erecting GI strip of high purity required size used for earthing on wall and / or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP.

ITEM No. 456 :- Lift 10 Passenger (17.1.4) SITC of Electric Traction Passenger Lift with · Rated capacity :- 10 Passenger / 680Kg · Floors :- G+1 floor (2 Stops / 2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR / MRL · Rated speed :- 1.0mps VS · Car / Landing door clear opening of 800 mm wide x 2000 mm high · Clear Car size of 1300 mm wide x1350 mm deep x 2250mm high · Lift shaft available having clear size of 1800 mm wide x3000 mm deep, 1600 mm Pit depth, 4500 mm Overhead. · Doors type :- COPO / TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves / frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower / fan for ventilation and SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code and luminous indicator around button with FPI, scrolling UP / DN LED indicator and with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi and English with intercom system with telephone instrument in Lift car, LMR and FCC / ground floor. LOP with SS face plate having recess / surface push button box for all landings with scrolling UP / DN LED indicator having metallic push buttons with Braille code and luminous indicator around button with CPI, Lift car arrival and next travel direction audio-visual indication at all landings. Lift controller based on microprocessor / PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open / close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size and strength, copper wire for power and control circuit, with provision for addition of floor / control card and allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class.

ARD complete with necessary SMF VRLA batteries. Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car and in LMR / inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR / FCC with HDR data backup for min. 90 days with min.18” FHD TV monitor, to be kept in FCC / LMR as directed by Engineer in charge. · Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts / hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor / shaft walls complete with main / diverter traction sheaves, suspension wire ropes / belts of adequate size and strength. Other mechanical parts such as 'T' section adequate size guide rails for car and counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work. · Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required and scaffolding for erecting guide rails, providing and fixing steel girders / RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions and "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

ITEM No. 457 :- (17.1.7) SITC of Electric Traction Passenger cum Stretcher / Hospital Lift with · Rated capacity :- 15 Passenger / 1020Kg · Floors :- G+1 floor (2 Stops / 2 Landings) · Travel :- 3 to 4.2 mtrs · Location of Lift Machine:- MR / MRL [applicable for Passenger Lift with MRL only and Stretcher / Hospital Lift with MR and MRL] · Rated speed :- 1.0mps VS · Car / Landing door clear opening of 800 / 900 / 1000 mm wide x 2000mm high · Clear Car size of 1000 mm wide x 2400 mm deep x 2250 mm high · Lift shaft available having clear size of 3000 mm wide x 2200 mm deep, ......mm Pit depth, ………mm Overhead. · Doors type :- COPO / TOPO Doors with frame made from SS 304 grade solid(non-cladded) sheet of 1.5mm thick in hairline finish for car and all landing doors with SS door architraves / frames The lift doors shall have minimum 1 hour fire rating (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory). · Lift car enclosure made from SS 304 grade solid (non-cladded) sheet of 1.5mm, thick with hairline finish with frame made from MS girders, bracing of adequate size with minimum safety factor of 5, with Toe Guard Apron, with necessary false ceiling with adequate LED lights, blower / fan for ventilation and SS chequered plate flooring, handrails, mirror, emergency light etc. The lift car interior design shall be done as per the directions of engineer in charge. · COP with SS face plate having metallic push buttons with Braille code and luminous indicator around button with FPI, scrolling UP / DN LED indicator and with / without attendant key switch, OWD with audio-visual alarm, VAS in Marathi, Hindi and English with intercom system with telephone instrument in Lift car, LMR and FCC / ground floor. · LOP with SS face plate having recess / surface push button box for all landings with scrolling UP / DN LED indicator having metallic push buttons with Braille code and luminous indicator around button with CPI, Lift car arrival and next travel direction audio-visual indication at all landings. · Lift controller based on microprocessor / PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port. The controller shall have necessary protections such as overcurrent, overvoltage, over speed, overheat for all devices including lift motor and travel direction protection, protection for phase loss at input or output etc. various operation modes such as maintenance, change direction by attendant, full load bypass, VIP call operation, self levelling operation, call cancel facility, auto return to home landing, fireman evacuation operation, earthquake operation, door open / close operation from COP etc. The system can record information for minimum 30 latest faults, with real-time clock management and handheld keypad with LCD screen for view and setting of parameters. The control panel duly wired with proper size and strength, copper wire for power and control circuit, with provision for addition of floor / control card and allied accessories control panel having enclosure of 1.5 millimetre CRCA sheet with powder coating with IP54 Protection class.

ARD complete with necessary SMF VRLA batteries. Fireman controller having fireman switch at fire Landing. · CCTV surveillance system comprises of 2 nos minimum 2.0MP FHD IP based vandal proof Dome camera in lift car and in LMR / inside lift shaft top aimed on Lift machinery and controller with NVR kept in LMR / FCC with HDR data backup for min. 90 days min. with 18” FHD TV monitor, to be kept in FCC / LMR as directed by Engineer In Charge. Lift Machine of Gearless PMSM of suitable kW with duty cycle of minimum 120 starts / hr (with submission of necessary valid test certificate issued by NABL accredited or Independent test laboratory), with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor / shaft walls complete with main / diverter traction sheaves, suspension wire ropes / belts of adequate size and strength. Other mechanical parts such as 'T' section adequate size guide rails for car and counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etcetera. erected with necessary steel work.· Minor civil work such as alteration work if any necessary for erection of landing door frames and it's accessories e.g. sill, header, hole pass etc complete with plaster finish, civil work for erection buffers, erection of lift machinery, adequate size core cuts if required and scaffolding for erecting guide rails, providing and fixing steel girders / RCC work having adequate strength for mounting and hoisting lift machine etc. complete as per specification no. LFT. · General: - Job includes entire procedure of obtaining all necessary erection permissions and "License to Work the Lift" from Electrical Inspector(Lifts) with submission to the Engineer In Charge. · The above rate includes Fully Comprehensive AMC for one year from the date of commissioning.

TOTAL (ii) Electrical Work

TOTAL (i) Civil Work

TOTAL (ii) Electrical Work

TOTAL PART – A (Work Portion)

Wonder Construction

Pawar Patkar Constructions Pvt.Ltd.

Shubham EPC Private Limited