Repair/Renovation of Quarter No. C-10 occupied by Dr. Poonam Bhau near Ram Leela Ground Kathua.

Amount

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material including all leads & lifts.

Demolishing mud phaska in terracing and disposal of material including all leads & lifts.

Painting top of roofs with bitumen of approved quality at 17 kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm incl. cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete with residual type petroleum bitumen of penetration 80/100

10 cm thick mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35 kg/cum of earth and gobri leaping with mix 1 : 1 ( 1 clay : 1 cow dung) and covered with flat tile bricks of class designation 100 grouted with cement mortar 1:3 mixed with 2% of integral water proofing compound by weight of cement & finished neat with hand moulded F.P.S. brick tiles incl. all leads, lifts & carriage of material by MT/ H.L.

Providing gola 75 x 75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 10mm down gauge) including finishing with cement mortar 1:3 ( 1 cement : 3 fine sand) as per standard design in 75 x 75 mm deep chase including all leads, lifts and carriage of material by MT / H.L.

Making Khurras 45 x 45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1 m x 1m x 400 micron, finished with 12 mm cement plaster 1:3 ( 1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete incl. all leads, lifts & carriage of material by MT/ H.L.

Providing and fixing 35mm thick panelled or panelled and glazed shutters of Second class deodar wood for door, windows and clerestory windows including ISI marked black enameled M.S.butt Hinges with necessary screws including Panelling of Particle Board 12mm thick Plain particle board flat pressed, 3 layer (like Novapan, Ecoboard etc)or graded wood particle board (like Bhuttan Board) medium density grade 1, IS : 3087 marked

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick , Particle Board 12 mm thick plain particle board flat pressed, three layer or graded wood particle board medium density grade IS: 3087 marked.

Providing and fixing 35 mm thick Wire Gauze shutters using galvanised M.S. wire gauge of average width for aperture 1.4 mm in both direction with wire of dia. 0.63 mm for doors, windows & clerestory windows with hinges & necessary screws. ISI marked M.S. pressed bright finished butt hinges with necessary screws of req. size. Second Class deodar wood.

Providing and fixing 35mm thick glazed shutters of Second class deodar wood for doors, windows and clerestory windows using 10 kg/ sqm (4 mm thick) glass panes including black enameled ISI marked M.S. butt hinges with necessary screws.

Providing and fixing aluminium tower bolts ISI marked (anodised anodic coating not less than grade AC10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium handles ISI marked (anodised anodic coating not less than grade AC10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing aluminium sliding door bolts 300 x 16 mm ISI marked anodised (anodic coating not less than grade AC10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc complete

Providing and fixing door closer spring type of good quality

Renewing glass panes, with wooden fillets wherever necessary: glass panes weighing 10 kg/sqm.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying plaster of Paris Putty of 2 mm thickness over plastered surface to prepare the surface even & smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade.Old work ( one or more coats)

Finishing wall with water proofing cement paint of required shade - New work (two or More coats) applied @ 3.84 kg/ 10 sqm

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work.

M/S SHIV OM CONSTRUCTIONS

S.K Associates & Engineers

M/S JAI SITA RAM CONSTRUCTION CO.

M/S JAI KUL DEV CONSTRUCTIONS