Special repair of roof and floor of Station Armoury at 19 Wing and Special repairs to certain doors and floors for NFS Project at 746 SU under GE(AF) Borjhar

Amount

Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges complete all as specified and as directed.

Dismantling timber scantlings 40 sq.cm and over in section, in any position with un-framed work complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

Demolition brickwork or stone boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan exc. 6m mean radious, built in cement mortar(1:4) complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair face of brick work of walls, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint of approved shade/tint over one coat of chalk whiting complete all as specified and as directed.

M&L for 2nd class hard-wood in timber scantlings, clean swan, timber and fixed complete all as specified and as directed.

S&F boarding, 2nd class hardwood, 20mm thick with nails in any situation (except flooring and sikirting), planed one side with butt joints complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 centimetre width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying two coats of creosote oil on new or old wooden surfaces complete all as specified and as directed..

S&F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc. fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, etc. fixed with self tapping screws complete all as specified and as directed.

Demolition of cement concrete unreinforced in ground floors and pavings, n exc. 15cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in sub base, surface finished fair and even, without using extra cement complete all as specified and as directed.

M&L for machine cut kota stone slab flooring, 20-25mm thick over cement screed base laid and jointed with grey cement slurry, mixed with pigment to match the shade of the slab including rubbing, polishing and finishing over and including 20mm screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for machine cut kota stone slab flooring, 20-25mm thick in riser of steps, skirting, dado and pillar, etc. laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and finishing over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

M&L for 50mm thick cement concrete (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in sub base complete all as specified and as directed.

M&L for vitrified ceramic coloured tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36sqm, as in floors, skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick wall, etc. racking out joint, hacking for keys, scrubbing down with water, etc complete all as specified and as directed.

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work of walls, mixed with WPC by weight of cement or as per manufacture's instructions, finished even and smooth without using extra cement complete all as specified and as directed. Note : WPC shall be meansured and paid seperately.

Supply only integral WPC of best quality of approved make complete all as specified and as directed.

Complete removal of existing treatment by washing, rubbing, scapping, etc. plaster or unplastered surfaces of old walls complete all as specified and as directed.

M&L for 3mm thick cement wall care putty applying a fine coat over wall surfaces and to provide smooth even surface complete all as specified and as directed.

M&L for prepartion of newly plastered/old wall plastered/concrete internal surfaces or room by rubbing down and applying two coats of diistemper oil emulsion (OBD) over one coat primer as on walls including necessary scafoldings, etc. complete all as all as specified and as directed.

Taking down chowkhats or frames exc. 1.5sqm but n exc 4 sqm (without taking off shutters from the frames) complete all as specified and as directed.

Taking down aluminium chowkhats or frames exc 1.5 sqm but n exc 4 sqm (without taking off shutters from the frames) complete all as specified and as directed.

M&L for 2nd Second class hard-wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in scantlings clean swan timber an fixed complete all as specified and as directed.

S&F for 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and as directed.

M&L for plain framed, panelled shutter (two panel) with 35mm thick 2nd class hard wood with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F but hinges of size 100mm, medium weight, cold rolled mild steel and fixed complete all as specified and as directed.

S&F 150mm long MS barrel tower bolt, stove enamelled black with bright bolt complete all as specified and as directed.

S&F 200mm long aluminum anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F 250mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt, not less than 12mm dia and including a minimum of 6 bolt and nuts complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 250mm complete all as specified and as directed.

S&F powder coated aluminium anodised door/window/cubiles frame (square/ rectangular/channel) type as required for sliding/ fixed door/window/partition with one or more rebates including joining beads, cleats, etc. for fixing, aluminium section weight not less than 0.55kg/Rm complete all as specified and as directed.

S&F for cast iron body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed .

S&F for aluminium body door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed complete all as directed .

S&F aluminium anodised powder coated door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and as directed.

M&L for glazing with sheet glass 5.5mm thick ordinary quality fixed with rubber gasket or aluminium beads as required, in square exceeding 0.5sqm in each pane complete all as specified and as directed.

S&F aluminium handle, cast type anodized of size 150mm complete all as specified and as directed.

S&F 150mm long MS pressed handles, oval type, stove enamelled black complete all as specified and as directed.

S&F as in repairs floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

S&F but hinges of size 125mm, medium weight, cold rolled, mild steel and fixed complete all as specified and as directed.

M.S. Construction

M/s Nice Traders

M/s Rawat Enterprises

Arpara Trade Agency

M/S Trio Engineers And Builders

Ms N D Enterpise