SITC of of 630KVA Distribution Substation one each at SCADA Data Centre Panama Chowk and SCADA DRC Gladni alongwith 11KV lines

Amount

Particulars of works for Creation of 630 KVA Sub Station

Supply, Installation & commissioning of 11/0.433 KV, 630 KVA 3-Phase Distribution Transformer with Bi-metallic terminal Connectors, Energy Level: 2, "BIS Marked" (Copper Wound) alongwith LV Cable Box having detachable Alumnium Gland plate including Transportation

Supply, Transportation, Erection of 9 Mtr Long PCC Pole (WL-300 KG) including excavation of pit and back filling of soil & consolidating by ramming, watering etc.

Supply, Transportation, Fabrication & Fixing of MS Channel Iron, Cross arms, Angle Iron Braces, Clamps etc duly fabricated, red oxide & aluminium paint coated including all necessary Nut & Bolts & Washers etc.

Supply, Installation, Testing & Commissioning of 11 KV GO AB Switch, 3-phase, 3-pole, 400 Amp/11 KV Link Set (450 x 50 x 6mm)

Supply, Installation, Testing & Commissioning of 11 KV Horn Gap Set

Supply & Fixing of 11 KV LA Set 9 KV, 10 KA with Polymer/Porcelain housing, Stn Type

Providing & Fixing of PVC Cable 400 mm² alongwith 12 Nos Al. Thimble of 400 mm²

Providing & Fixing of LT Distribution Box with630Amp MCCB for incomer & switch fuse unit for Out Going Ckt.

Construction of Cement Platform (8x8x3) & 3feet below ground level ) for 630 KVA SubStation along with the mesh fencing around the periphery.

Providing of Earthing of Sub-Station - Excavation of Earth Pit, Installation of Earth Pipe of 40 mm of nominal bore & length 2.5 Mtr, GI Strip for neutral Earthing of Size 75 mm x 10 mm & 50 mm x 6 mm for connection of Transformer Body, GO Set, LA Set (Complete Job)

Providing & Fixing of 11 KV Pin Insulator with Pins (Polymer/Porcelain) 10 KN

Providing & Fixing of 11 KV Disc Insulator with Fittings (Polymer/Porcelain) 45 KN

Providing & Fixing of Anti Climbing device with Clamps

Providing & Fixing of Danger Plates with Clamps

Providing & Fixing of Stay Set with 50 x 8 mm Stay Clamp, Guy Insulator (2 Nos), Anchoring Plate (200 x 200 x 6 mm), Nut & Bolts, 2 No Turn Buckle, 1.8m long, 16 mm diameter solid Stay Rod & 7/3.15 mm dia stranded wire complete

Particulars of works for erection of 11KV line with ACSR Weasel Conductor on 9 mtrs PCC poles

Supply, Transportation, Erection of 9 Mtr Long PCC Pole (WL-300 KG) including excavation of pit and back filling of soil & consolidating by ramming, watering etc.

Supply, Transportation, Fabrication & Fixing of MS Channel Iron, Cross arms, Angle Iron Braces, Clamps etc duly fabricated, red oxide & aluminium paint coated including all necessary Nut & Bolts & Washers etc.

Supply, Laying & Stringing of ACSR Weasel Conductor on Cross arms through insulators including proper binding & twisting with soft Aluminium Wire

Providing & Fixing of 11 KV Pin Insulator with Pins (Polymer/Porcelain) 10 KN

Providing & Fixing of 11 KV Disc Insulator with Fittings (Polymer/Porcelain) 45 KN

Providing & Fixing of Stay Set with 50 x 8 mm Stay Clamp, Guy Insulator (2 Nos), Anchoring Plate (200 x 200 x 6 mm), Nut & Bolts, 2 No Turn Buckle, 1.8m long, 16 mm diameter solid Stay Rod & 7/3.15 mm dia stranded wire complete

Providing & Fixing of Danger Plates with Clamps

Providing & Fixing of Anti Climbing device with Clamps

Providing of Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm, 2.5 Mtr Long through GI Strip

Providing of Stone Pad 300 mmx300mmx75mm

Providing and fixing of Aluminium Jointing sleeves

Providing and fixing of P G Clamps

Particulars of works for erection of 11KV line with 50 mmSq HT ABC on 9 mtrs PCC poles

Supply, Transportation, Erection of 9 Mtr Long PCC Pole (WL-300 KG) including excavation of pit and back filling of soil & consolidating by ramming, watering etc.

Supply Installation, testing & Commissioning of 50 mm² AB (HT) Cable (3x185 + 1x150 mm² bare messanger) cable

Providing & fixing of Heat Shrinkable Outdoor Cable Termination Kit

Providing & fixing of Suspension/Tension Clamp with eye hook

Providing , fixing & tightening of Galvinized Nuts and Bolts.

Providing & fixing of Danger Plates

Providing & fixing of Anti-Climbing Device with Clamps

Providing of Earthing Complete by GI Pipe 40 mm or GI Rod 20mm 2.5 mtr(Complete)

Providing of Stone Pad 300 mmx300mmx75mm

Providing & erection ofGalvanised stay set with 50x8mm stay clamp, guy insulators (2 Nos), anchor plate (200x200x6mm), Nuts Bolts, 2 Nos turn buckles, 1.8 mtr long, 16 mm dia meter solid GS stay rod & 7/3.15 dia GI standard wire complete

Particulars of works for erection & commissioning of Isolation point

Supply, Transportation, Erection of 9 Mtr Long ST Pole (410 SP33) including excavation of pit and back filling of soil & consolidating by ramming, watering etc.

Supply, Transportation, Fabrication & Fixing of MS Channel Iron, Cross arms, Angle Iron Braces, Clamps etc duly fabricated, red oxide & aluminium paint coated including all necessary Nut & Bolts & Washers etc.

Supply, Laying & Stringing of ACSR Weasel Conductor on Cross arms through insulators including proper binding & twisting with soft Aluminium Wire

Supply, Installation, Testing & Commissioning of 11 KV GO AB Switch, 3-phase, 3-pole, 400 Amp/11 KV Link Set (450 x 50 x 6mm)

Providing & Fixing of 11 KV Pin Insulator with Pins (Polymer/Porcelain) 10 KN

Providing & Fixing of 11 KV Disc Insulator with Fittings (Polymer/Porcelain) 45 KN

Providing & Fixing of Stay Set with 50 x 8 mm Stay Clamp, Guy Insulator (2 Nos), Anchoring Plate (200 x 200 x 6 mm), Nut & Bolts, 2 No Turn Buckle, 1.8m long, 16 mm diameter solid Stay Rod & 7/3.15 mm dia stranded wire complete

Providing of Cement Bottomining (1:2:4) 0.45 cum/pole

Providing & Fixing of Danger Plates with Clamps

Providing & Fixing of Anti Climbing device with Clamps

Providing of Earthing Complete by GI Pipe 40 mm or GI Rod 20 mm, 2.5 Mtr Long through GI Strip

The Trikuta Engineer

M/S PVM INFRA

M/S NEW TRIKUTA TECHNOCRATES