SPECIAL REPAIR OF BUILDING NO P-67 BLOCK TYPE-V QTRS. OF RAKSHA VIHAR COLONY OF DRDE GWALIOR UNDER GE I RND DELHI

Amount

Taking down chowkats or frames with shutters area exc 1.5 sqm but not exceeding 4 sqm each without taking off shutters from the frames complete all as specified and directed.

All as per item No.1.00 above but not exceeding 1.5 sqm.

Taking down shutter of any description area exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

All as per item No. 3.00 above but not exc 1 sqm each.

Taking down cement plaster from brick or stone wall etc, including racking out joint ,haking for key, scrubbing down with water complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar complete all as specified and directed.

Demolition of stone slab and tiles of any description or thickness in floors ,aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling of existing roof treatment any description and thickness complete including removal of debris away from the site complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and paving not exc 15 cm thickness (below or above ground level) and removing debris from site of work to outside MD land complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed.

Dismantling of unserviceable water tanks of 1000 ltr complete all as specified and directed.

Dismantling of unserviceable water tanks exc 250 ltr & n.exc 500 ltr capacity complete all as specified and directed.

Dismantling of cast iron drain pipe 100 mm dia from floor/walls etc and taking out from trenches/floors complete all as specified and directed.

Dismantling of boarding in kitchen cabinet of any description fixed in any position with nails complete all as specified and directed.

S&F PVC door frame of size 50mm x 47mm made out of 5 mm plain PVC sheet reinforced with MS tube complete all as specified and directed.

Supply & fix factory made solid PVC moulded door shutter of 30mm thick(style) with 2,4 or 6 raised panel design with 2mm thick PVC moulded sheet on the front face and 2mm plain colour PVC sheet on back face supplied and fitted complete all as specified and directed.

M&L for plain solid straight chowkats and frames wrought, framed second class hardwood rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F for 35mm thick 2nd class hard wood factory made plain framed panelled shutter (any number of panels), with lock rail and panel of 12mm thick BWP veneered particle board with commercial veneering on both faces. The sizes of rails and stiles as per IS:1003 (Part -I) Kiln seasoned and chemically pressure treated fitted to chowkats complete all as specified and directed.

S&F 2nd class glazed and skeleton shutters of 35 mm thick , as in doors, open rebated and prepared to receive glass, gauge etc(without sashbars),edges of framing plain, chamfered, fitted with cut and mitred beads for securing glass,etc. size of member as specified in SSR Part-I Section 8.20(a) complete all as specified and directed.

M&L butt hinges medium grade cold rolled mild steel and fixed size of hinges 100 mm thick complete all as specified and directed.

S&F 300 mm ordinary rat tail rod pattern door spring MS incl roller & plate complete all as specified and directed.

S&F 150 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed

S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 150 mm Aluminium handles, cast type, anodised complete all as specified and directed.

M&L for painting with two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces of any description, not other wise described, over 10cm width or girth including preparation of surfaces complete all as specified and directed.

S&F floor door stopper, 150mm in length of aluminium alloy body tongue, anodised, with hard drawn steel spring, fixed in floor all as specified and directed

S&F of powder coated aluminium section to be used in door/Sliding window frame and shutter including fabrication of frame/shutters and fixing to wall with necessary lugs, cleat etc including all accessories such as glazing clips and rubber beading for fixing of glass panes hinges etc complete all as specified and directed. Note: Glass panes will be measured and paid separately.

S&F sheet glass 5.50 mm thick ordinary quality in square n.exc 1.00 sqm in each pane and fixed with neoprene/rubber beads complete all as specified and directed.

S&F Aluminium grill of make "Deco grill" and DG - 104 model with 7.5 mm grill per square meter or any other equivalent approved make complete all as approved and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:4 on fair face of brick wall or concrete surfaces, finished even & fair including mixing of water proofing compound @3% by weight of cement or as per manufacturer's instruction complete all as specified and directed. Note: -WPC shall be measured and paid separately as supply only.

M&L for rendering 15mm thick on wall or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified.

M&L Brick work with sub class 'B' brick old size straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed.

M&L Granite (of any type) work 18/20 mm thick (table rubbed and polished) in steps, pillars, cooking platform, window cill etc fixed over and including 20 mm thick cement mortar 1:4 including pointing in white cement 1:2 including moulding on exposed edges complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in padding bed plates or mass complete all as specified and directed.

M&L for screed bed 10mm thick in CM 1:4 Mixed with water proofing compound. Note:-WPC will be measured and paid separately.

M&L for water proofing treatment to RCC roof slab including parapet comprising with the following course of treatment/specifications from botton to top:- (a) Applying bituminous primer @100gm per Sqm over plastered surfaces of roof including parapet surfaces. Make: "TANK MASTIC" of STP Ltd or EMUFALTE" of Texsa India Ltd/IWL India Ltd. (b) One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.60 Kgs per Sqm, reinforced with non wovern polyester fabric of weight not less than 150 gms per Sqm. Note:- (i) Laying of APP based polymeric membrane shall be done over a coat of hot blown bitumen 85/25 Grade @1.20 Kg/Sqm after priming surfaces using bituminous emulsion (tack coat) @ 0.30 ltr/Sqm. (ii) A minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturer's instructions. (iii) The make of polymeric membrane shall be "SUPER THERMOLAY" of STP Ltd or "MOPLY FP" of Texsa India Ltd/IWL India Ltd. (c) Applying two coats of bituminous aluminium paint on top of APP membrane.

M&L 25mm thick PCC 1:2:4 type B-1 (20 mm graded stone aggregate) as in floors finished rough for receiving top layer complete all as specified and directed.

M&L for non skid coloured joint free tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

S&F Glazed ceramic coloured joint less tiles of size 450x350x6 to 7mm thick on vertical surfaces such as skirting/dados, etc set & jointed in neat cement Slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L 15mm thick screed bed or bedding layer of mortar in CM 1:4 for laying floor tiles etc complete all as specified and directed.

M&L coloured fully Vitrified tiles 10mm thick (Square/rectangular) polished area of of each tiles not n.exc 0.36 Sqm in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles complete all as specified and directed.

M&L for providing cement concrete type C-2, 1:3:6 (40mm graded stone aggregate), 75mm thick in sub base complete all as specified and directed.

M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab 20-25 mm thick in tread/ riser of steps ,skirting ,dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F of rotational moulded polyethylene water storage tanks of 1000 ltr capacity (cylindrical vertical with closed top) triple layer hoisted and fixed in position all as specified and directed.

S&F rotational moulded polyethylene water storage tank capacity 500ltr cylindrical vertical with closed top, ripple layer wall construction hoisted and fixed in position all as specified.

S& F ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed of 20mm bore min weight 455 gm complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections complete all as specified and directed.

All as per item No 50.00 above but 20mm dia.

All as per item No 50.00 above but 25mm dia.

S&F 15mm dia GI tubes medium grade with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

All as per item No 53.00 above but 20mm dia.

All as per item No 53.00 above but 25mm dia.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches with PVC clamp and GI screws complete all as specified and as directed.

S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for nominal bore complete all as specified and directed.

S&F 18 mm thick PVC ply of one side pre-laminated and other side plain white colour to make kitchen cabinet shutter/drawer front shutter complete all as specified and directed. Make:Rajshri/Celuka/Century/PVC Ply.

S&F auto closing hinges 35mm of 0 crank (KH-001) or 8 Crank (KH-002) openable at 110 degree for kitchen cabinet shutters.

S&F Brass handles cast type 100mm size fixed in positon for kitchen cabinet shutters complete all as specified and directed.

S&F in repair 16 gauge stainless steel handrail / railing for staircase and balcony of superior quality grade SS Code 304.

S&F 18 mm thick pre laminated particle board exterior grade prelaminated one side with decorative choice lamination and fixed to timber frame work/steel frame work as in cub board shutter/shelves complete all as specified and directed

S&F continuous hinge mild steel 30mm flaps and fixed to cub board shutter complete all as specified and directed.

S&F Brass handles cast type 125mm size fixed in positon for kitchen cabinet shutters complete all as specified and directed.

S&F brass lock 4 levers for cupboard grade I , Size 65mm complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C2 (using 40 mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.

S&F vitreous china squatting pan, orrisa pattern of size 580mmx440mm white with integral foot rests excluding flushing cistern and flush pipe complete all as specified and directed. Make: Parryware Cat part No. C-0117 or equivalent in Cera/Nycer/Jaquar.

S&F in repair wash down water closet pedestal pattern / vitreous china wash down water closet pan, white excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. Make: Parryware Cat part No. C-0297 (Elite) or equivalent in Cera/Nycer/Jaquar.

S&F Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repair wash hand basin, vitreous china ware white flat back of size 550 x 400mm including bracket, suitable size of PVC waste pipe PVC connection CP waste couping complete all as specified and directed. Make: Parryware Cat part No. C-0406 (oxford) or equivalent in Cera/Nycer/Jaquar.

S&F in repair PVC flushing cistern 10 ltrs and flush pipe syphonic action type low level with inlet ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm bore stop valve, cast copper alloy, screwed down, high pressure fancy type with long shank and cup Concealed type, screwed both ends for iron pipe or for union as fixed complete all as specified and directed.

S&F 15 mm bore bib taps cast copper alloy fancy type with chromium plated screwed down for iron pipe for brass ferrule complete all as specified and directed.

S&F in repair 15 mm bore brass chromium plated angle valve high pressure screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15 mm brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm bore brass CP wall mounting mixture for mixing screwed down for iron pipe complete all as specified and directed.

S&F in repair chromium plated (CP) toilet paper holder complete all as specified and directed.

S&F in repair 15mm two way bib cock with wall flange complete all as specified and directed.

M&L for cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair 125 mm size Chromium plated shower roses with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair aluminium towel rail 20 mm dia, D type, 60 cm long between flanges of approved quality complete all as specified and directed.

S&F in repair Chromium plated health hand faucet with 1 mtr tube & hook. Make : Prayag/Hindware/Cera/Somany.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. fixed with suitable rawal plug & screws complete all as specified and directed.

S&F in repair PVC Cabinet mirror of size 400x500 mm complete all as specified and directed.

S&F in repair 15mm bore CP sink cock swan neck type. Make:- Prayag / Plumber/ Jaquar/Hindware/Cera.

S&F in repair stainless steel sink 1.00 mm thick with drainage board for kitchen with plugs washers and waste pipe of 40mm dia PVC waste pipe incl new fittings upto floor trap, CP waste fitting and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460 mm with bowl size 410mm x 330mm x 160mm including making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Nirali/Bule Star.

S&F in repair 100mm dia PTMT grating complete all as specified and directed.

M&L for preparation of old painted wood or wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including & over two coats of wall care putty (1 mm thick each coat) complete all as specified and directed.

M&L for applying two coats of distemper oil emulsion on walls over prepared surfaces by applying putty complete all as specified and as directed. Note : Putty will be measured and paid separately.

M&L for applying two coats of distemper oil emulsion on ceiling over prepared surfaces by applying putty complete all as specified and as directed. Note : Putty will be measured and paid separately.

M&L for preparation of surfaces by removing old painted surfaces & applying two coats of wall care putty (1 mm thick each coat) on complete wall surface complete all as specified and as directed.

M&L applying two coats of exterior emulsion paint over a coat of Alkali resistant exterior wall primer over newly plastered surface including necessary scaffolding etc complete all as specified and as directed.

M&L complete removal of existing treatment of wall and applying two coats of exterior emulsion paint over a coat of Alkali resistant exterior wall primer after preparation of surface of including necessary scaffolding etc. complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply only liquid water proofing compound complete all as specified and directed.

Taking down carefully aluminium point wiring light/fan/socket or power by unscrewing from boards outlet boxes , fitting and fixture such as switches , sockets , ceiling roses , lamp holders , brackets , ceiling fittings, bulk head fittings, tube light fittings , regulators , MCB and DBs etc complete all as specified and as directed.

M&L for point wiring with 1.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable (FRLS) in and including rigid non-metalic PVC concealed conduit of size 20 mm, ISI marked medium grade for one light point or fan point or bell point controlled by one modular switch 5 Amp in & including suitable size module alongwith metal flush box including PVC insulated unsheathed 1.5 sqmm copper conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the disturbed surfaces matching with existing specifications complete all as specified and directed

All as per ser item No. 100.00 above but controlled by Modular 2 way switch.

M&L for point wiring independent with 1.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable (FRLS) in and including rigid non-metalic PVC Concealed conduit of size 20mm, ISI marked medium grade for modular switch socket 5 Amps including suitable size module alongwith metal flush box including PVC insulated unsheathed 1.5 sqmm copper conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the disturbed surfaces matching with existing specification complete all as specified and directed

All as per srl item No 102.00 above but in same board.

M&L for point wiring with 2.5 sqmm multi stranded PVC insulated unsheathed copper conductor cable (FRLS) in and including rigid non-metallic PVC concealed conduit of size 20 mm ISI marked medium grade for 3 pin 15 Amp modular socket outlet independent controlled by one switch on plastic laminated sheet including suitable size metal flush box including PVC insulated unsheathed 2.5 Sqmm copper conductor continuous earth wire and connecting with earth dolly including necessary cutting chasing for concealing of conduit and making good the disturbed surfaces matching with existing specifications complete all as specified and directed

S&F modular Switch 1 Way 6 Amp , 1 Module, AC 230 volts complete all as specified and directed.

S&F modular Bell push 6 Amp 1 Module AC 230 Volts complete all as specified and as directed.

S&F modular Switch 1 Way 16 Amp , 1 Module, AC 230 volts complete all as specified and directed.

S&F modular socket , 6/16 Amp - 6 Pin Combined 2 Module type , AC 230 volt complete all as specified and directed

S&F modular socket , 6 Amp - 5 Pin Combined 2 Module Flush type , AC 230 volt complete all as specified and directed

S&F modular white cover plate with frame but 2 module with modular flush box complete all as specified and as directed.

All as per ser item No. 110.00 above but 3 module.

All as per ser item No. 110.00 above but 4 module.

All as per ser item No. 110.00 above but 8 module.

S&F ceiling rose 65 x 50mm 3 terminal AC 230 volt complete all as specified and directed

S&F lamp holder angle/ batten holder PVC type with base plate suitable for 230 volt complete all as specified and directed.

S&F in repair door bell multi music type ,AC 230 volt ding dong single phase.

S&F modular fan step regulator, electronic type, AC 230 volts suitable for 1200mm/ 1400mm sweep ceiling fan, stepped range, hum free complete all as specified and directed.

S&F in repair of sheet metal enclosures for DBs when MCB to used SPN 12 way double door powder coated factory made IP 43 protection, IP 09 and provision of four pole, MCB/isolator/RCCB as incomer and SP/DP MCBs as outgoing fixed on wall/metal board/ wooden board all as directed.

S&F in repair of MCB SPN 63 Amps 10 KA, 'C' series all as specified and directed.

S&F in repair of MCB SPN 40 Amps 10 KA, 'C' series all as specified and directed.

S&F in repair of MCB SP 6 to 32 Amps 10 KA , "C' series all as specified and directed.

S&F in repair of MCCB 4 Pole, 125 Amp, 16 KA complete all as specified and directed.

S&F in repair of sheet metal enclosures Single pole and neutral with two pin earth plug and socket with plug top including double pole MCB 20 Amps complete all as specified and directed.

S&F in repair of sheet metal enclosures for DBs when MCB to used VTPN 4 way double door powder coated factory made IP 43 protection, IP 09 and provision of four pole, MCCB/isolator/RCCB as incomer ands SP/DP MCBs as outgoing fixed on wall/metal board/ wooden board all as directed.

S&F in repair sub main wiring with two single core PVC insulated cable (FRLS) 10 sqmm (Nominal dia) copper conductor multistranded and drawing in and including rigid non-metallic PVC concealed conduit of size 20mm dia for each phase & neutral ISI marked, 10 sqmm multistrand copper conductor PVC green unsheathed cable for earth continuity complete all as specified and directed. Note:- 2 run of 10 Sqmm + 1 run of 10 Sqmm as earth wire complete shall be considered as one RM.

All as per ser item No. 125.00 above but 6 Sqmm cable, PVC conduit medium grade ISI marked 25 mm for phase wire and neutral wire. Note:-2 run of 6 Sqmm + 1 run of 6 Sqmm as earth wire complete shall be considered as one RM.

All as per ser item No. 125.00 above but 4 Sqmm. Note:- 2 run of 4 Sqmm + 1 run of 4 Sqmm as earth wire complete sjhall be considred as one RM.

S&F in repair of surface and wall mounted 20Watt LED tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser and integrated electronic driver input voltage AC 230 V, 50 HZ complete all as specified and directed. Make Havells Cat Part No. LHEXACP7IN1W020 or equivalent in Philips/Bajaj/CG.

S&F in repair of energy saving decorative wall mounting LED fitting made out of poly carbonate suitable upto 10 watt LED and making connections complete all as specified and directed. Make: Havells Cat Part No. LHDL02160099 or equivalent in Philips / Bajaj .

S&F in repair of energy saving decorative Recess cum surface mounting LED luminaire suitable for 1 x 6 watt LED lamp complete all as specified and directed. Make - Havells Cat Part No. LHEAABP6IL1W006 or equivalent model of Philips/ Bajaj.

S&F in repair of energy saving decorative wall mounting LED Lighting fixtures made out of poly carbonate suitable for 5 watt LED and making connections complete all as specified and directed. Make: Havells Cat Part No. LHEXBLP7IN1W005 or equivalent in Philips/Bajaj .

S&F in repair of energy saving, surface mounted, decorative hexagon Bulk Head LED luminaire and making connections complete all as specified and directed. Make: Havells Cat Part No. HEXAFT10WLED857SSYMBOPC or equivalent model of Philips/Bajaj.

S&F in repair of LED domestic bulb 7 Watt type 240 volts complete all as specified and as directed. Make - Havells/Crompton/ Bajaj

S&F in repair of LED domestic bulb 9 Watt type 240 volts complete all as specified and as directed. Make - Havells/Crompton/ Bajaj

M&L for earthing complete with galvanised steel earth plate electrode 60x60cmx6.0mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised iron earth lead wire 4.00 mm dia by means of nuts bolts, check nut and washers of galvanised iron protected by 15 mm bore GI pipe (medium grade) and connected to main switch board as directed including concrete pit in PCC (1:3:6) type C1 precast RCC (1:2:4) type B1 cover slab 40x40 Cm x 40mm reinforced with 6 mm dia deformed bar @ 5 cm c/c with one handle for lifting made out of 8 mm dia MS bar, funnel, wire mesh, 20 mm bore GI pipe (medium grade) for watering including charcoal, coke and salt in alternative layers including necessary excavation and earth work in any type of soil and testing complete all as shown on electrical plate No-3 of SSR Part-I.

S&F in repair installation , testing and commissioning pressure die-cast aluminium housing with high power LED bldg security light fitting with IP-66 , 1x 25 Watt , fixed in position with and including 40 mm dia light grade GI Pipe made to shape not less then 1.2 Mtr long for mounting fitting with and including suitable size duly painted MS FI 40 x6mm clamps with nut and bolts , washers making electrical connection with and including three core 16/0.20 mm copper conductor flexible cable from connector to fitting complete all as specified and directed. Make-Havells of Cat Part No ENDURAPEARLSL25WLED757SASYTOPC or equivalent Philips/CG.

M/s Himgiri construction

M/S SANJAY AGARWAL

M/s Yashika Enterprises

M/S YOGANSH CONSTRUCTION CO.

Lall Electronics