Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹27.7 LAccepted-AOC 216 UGF RAM VIHAR ANAND VIHAR DELHI 110092 | SHAHDARA | DELHI | 110092 | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹31.5 L+₹2.8 L (9.64%)Rejected-AOC | L-2 | Rejected-AOC L-2 | |
| 3 | L-3₹33.9 L+₹5.1 L (17.9%)Rejected-AOC | L-3 | Rejected-AOC L-3 | |
| 4 | L-4₹37.4 L+₹8.6 L (29.9%)Rejected-AOC 4 9 SWARG ASHRAM NANAK RAM COLONY PARAMANAND CHOWK DELHI 110 009 | NEW DELHI | NEW DELHI | DELHI | 110009 | L-4 | Rejected-AOC L-4 | |
| 5 | L-5₹37.5 L+₹8.7 L (30.3%)Rejected-AOC | L-5 | Rejected-AOC L-5 |
Tender Value
Refer Docs
EMD Value
₹88,600
Closing Date
7 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DELHI
MILITARY ENGINEER SERVICE, GARRISON ENGINEER (I) RND, LUCKNOW ROAD, TIMARPUR, DELHI-110054
ADDITION/ALTERATION TO TOILETS OF B BLOCK OF DESIDOC LAB AT METCALFE HOUSE BLDG NO P-143 UNDER GE (I) RND DELHI
2022_MES_559587_1
GE/RND-70/DLI/2022-2023
Open Tender
Civil Works
Item Rate
180 days
Delhi
Class-D, Cat a(i)
2 documents required · 2 mandatory
₹500
GE I RND DELHI
₹88,600
Yes
31 Dec 2022
22 Oct 2022
9 Dec 2022
22 Oct 2022
7 Dec 2022
25 Nov 2022
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.
M&L for 1st quality non skid coloured tiles 400mm X 400mm X 7 to 8mm thick joint free as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15 mm thick cement screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for 1st quality glazed coloured ceramic joint free tiles in vertical surfaces of size 600X300X7 to 8 mm thick, set & jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick rendering in CM 1:4 including making pattern with highlighters as approved by GE complete all as specified and directed .
M&L for light shade coloured fully vitrified tiles 600x600mmx10mm thick in floors etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.
M&L for light shade coloured fully vitrified tiles 600x600mmx10mm in dado/skirting etc. Set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.
Dismantling stone slabs or tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.
M&L for Granite work 16 to 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window cills,floors, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed. Note:- Shade of granite shall be approved by GE.
Demolition of brick work built in cement mortar of any description complete all as specified and directed.
M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with sub class'B' bricks old size straight or curved on plan exc. 6m mean radius in half brick thick wall built in cement morter 1:4 etc complete all as specified and directed.
M&L for repairing of spalled concrete from RCC surfaces (such as ceiling, beams, columns, parapets, chajjas etc) in the following stage:- (a) Preparation of existing surfaces like chipping of unsound weak/loose concrete with electric hammer or mannually including tapping all edges ,making square shoulder of cavities etc not exc50 mm thickness,removal of debrises complete all as specified and directed. (b) Applying rust remover cum passivators silka rust off 100 @ 0.20Kg /Sqm/each coat as per manufacturer instructions to remove rust from existing reinforcement. (c) Applying a coat of epoxy based zinc rich rebar corrison protection system @0.15Kg/Sqm/coat as per manufacturer instructions. (d) Mixing and applying two components epoxy resin concrete .Bonding coat @0.40Kg/Sqm(mixing proportion as per manufactures instructions) including preparation of surfaces by chipping and throughly cleaning of surfaces complete wherever required over reinforcement(if required) and as directed by EIC (make; Silkaor equilent) Reinforcement shall be measured and paid saprately (e) Applying a prebached one component polymer modified cementious patch repair mortar N,exc 50mm in layers of 15 mm thick as per manufacturer instructions to match the existing surface as in sides and soffits etc of slabs, chajjas, fins, facias,parapets, lintels, columns and beams etc complete including necessary scaffolding, shuttering, necessary chases to brick work or RCC members at any height upto 6 storey building including removing of small trees shrubs etc complete all as specified and directed.
Taking down cement plaster from brick or stone wall or concrete surface including raking out joint, hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for 15mm thick plaster on brick work or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick plaster on fair faces of brick work or concrete surfaces in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.
M&L for 5 mm thick plaster in CM 1:3 as in soffits of slabs/Chajja/Sunshade finishing the plastered surface even & smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surfaces of walls and applying two coats of oil emulsion distemper over 2mm thick wall care putty (each coat minimum 1mm thick) complete all as specified and directed.
All as per item Ser No 16.00 above but on ceiling surfaces.
M&L for complete removal of exisiting treatment from plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over 2mm thick wall care putty (each coat minimum 1mm thick) complete all as specified and directed.
M&L for preparation of old plastered surfaces of walls, parapets, facia of projections etc by brooming, filling minor holes with putty, preparation of edges etc and applying one coat of acrylic exterior emulsion (weather coat) upto G+5 height of building complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for as in pillar, roof slab, Manhole/drain cover slab, Chajja, shelves, lintel band etc complete all as specified and directed.
M&L for mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia etc complete all as specified and directed.
M&L for reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded mechanically crushed stone aggregate) as in roofs/Chajjas/Shelves/bands etc complete all as specified and directed.
Use and waste of form work to roofs beam, RCC Shelves,bands and similar work for fair finish surfaces etc complete all as specified and directed.
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.
M&L for preparation of new surfaces of walls and applying two coats of acrylic emulsion exterior paint over a coat of primer complete all as specified and directed.
M&L for preparation of old ceiling surfaces by brooming, filling minor holes with wall care putty etc and applying one coat of distemper oil emulsion complete all as specified and directed.
Taking up or down 15 mm bore steel tubing & connection including cleaning for refixing serviceable tubing complete all as specified and directed.
All as per item Ser No 27.00 above but 20 mm bore
All as per item Ser No 27.00 above but 40/50mm bore
Supply and laying 50 mm outer dia CPVC pipes SDR 11 including CPVC SDR 11 fittings such as brass Elbows,Tee,reducers,Flanges,nipples etc on walls/ceiling or laying in floors complete all as specified and directed.
All as per item Ser No 30.00 above but 32mm bore.
All as per item Ser No 30.00 above but 20mm bore.
S&F in repair 15 mm bore cast copper alloy fancy type stop valve/Angle valve, screwed down, high pressure, with crutch or butterfly handle, screwed both ends of etc complete all as specified and directed.
S&F in repair 15mm bore brass cromium plated fancy type pillar tap long shank(swan neck) with capstan head screwed down high pressure with or without lettered hot or cold with long screw shank & fly nuts etc complete all as specified and directed.
S&F in repair for 15mm bore brass chromium plated fancy type long body bib tap with wall flange fixed complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan padestal pattern white excluding fixing bolts but including jointing to flushing cistern and flush pipe antisyphonage pipe etc complete all as specified and directed.
S&F in repair plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified and directed.
S&F in repairs vitreous chinaSquatting pan Orissa pattern of size 580X440 mm white with integral foot rest with 'P' or 'S' trap including provn of lime concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surface complete all as specified and directed.
S&F in repairs 10 ltrs capacity PVC low level flushing cistern with syphone handled level PVC bend inclduing connecting to WC and fixing on walls with bracket complete all as specified and directed.
S&F in repairs vitreous china Urinal, Half stall type white (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe and outgoing pipes complete all as specified and directed.
S&F in repair 10mm thick toughened glass urinal partition with both side frost finish of size 450 x900mm fixed on wall with stainless steel 304 Heavy 'L' brackets complete all as specified and directed.
S&F in repair oval type wash hand basin white of size 550x400mm including chromium plated coupling etc fixed as in counter slab complete all as specified and directed.
Supply and fixing in repair stainless steel toilet paper holder with flat recessed type with Flap complete all as specified and directed.
S&F in repair brass chromium plated grating of size 100 mm for outlet of water complete all as specified and directed.
S&F in repair PVC connection 60 cm long with brass check nuts on both sides suitable for 15 mm bore iron pipe complete all as specified and directed.
S&F in repairs Health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
S&F in repairs brass chromium plated bottle trap 32 mm dia including jointing to waste fitting and waste pipe complete all as specified and directed.
S&F in repairs 15 mm dia brass chromium plated angle valve double ways complete all as specified and directed.
S&F in repairs brass chromium plated jet spray with tube for single syphonic EWC complete all as specified and directed.
S&F in repair brass chromium plated towel Rail of size 600 mm fixed to wall complete all as specified and directed.
S&F in repair brass Chromium plated soap dish of size 100X100 mm mm fixed to wall with CP brass screws etc complete all as specified and directed.
S&F in repair brass chromium plated urinal spreader for fixing with 15 mm dia pipe complete all as specified and directed.
S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples including dismantling old unserviceable tank complete all as specified and directed.
S&F in repairs in 20mm dia ball valve high pressure of PTMT with aluminum rod with polyplast ball complete all as specified and directed.
S&F in repair gun metal globe or gate valves 32 mm dia of pipes with iron wheel head,screwed both ends for iron pipes and fixed complete all as specified and directed.
S&F in repair looking mirror 5.50 mm thick of superior quality, any size, with approved border design fixed with commercial plywood 6 mm thick or AC board and with teak frame fixed complete all as specified and directed.
Dismantling 100 mm bore cast iron soil, waste and vent pipes fixed on walls or laid in floors including fittings including removing from site complete all as specified and directed.
M&L for fixing, jointing and testing in position of ISI marked UV stablized UPVC pipe size 110mm dia for soil, waste, and vent, Type-B as per IS-13592 suitable for rubber ring joints, including all necessary specials and fittings (Confirming to IS-4735) i.e. bends, tees , junctions (with or without any type doors), reducers, WC connectors, couplers, vents cowels, clamps, rubber rings, clean outs etc, fixing at walls/ceiling/in floor level supproted by clamp & hangers etc in concealed/inside duct/under floor & basement ceiling/external work etc. including chase cutting if required upto 06 storeyed building complete all as specified and directed.
M&L for providing & fixing UPVC Floor / Nahani Trap of self cleansing design with CP jally complete in all respects of size (110x 110mm) complete all as specified and directed.
M&L for providing & fixing UPVC (110mm size) multifloor trap. complete all as specified and directed.
M&L for providing & fixing UPVC Gully traps Trap of self cleansing design with CP jally complete in all respects of size (160x 110mm) Single / double size as per site complete all as specified and directed.
M&L for cutting chases, pinning in, for brick walls built in cement mortar, making good in cement mortar 1:3 or PCC M-15 (nominal mix) type B-0 (using 12.5 mm graded aggregate) and finish to match with the existing as required for inserting concealed water tubing etc cutting not exceeding 10 cm girth complete all as specified and directed.
Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for water proofing treatment to sunken slab portion complete all as specified and as directed in the following operations:- (a) Rendering 15 mm thick in CM 1 : 4 mixed with water proofing compound @ 1% by weight of cement including the cost of water proofing compound (b) After drying of plastered surface, suitable primer such as multiplas primer/ muliplas/cold sticker/ multiplas blow bitumen 85/25 or 90/15 shall be coated on the surface. (c) MULTIPLAS @ 3 Kg/Sqm shall be unrolled over the coated surface (with overlap of 10 cm) and bonded completely to the primed surface. The overlap shall them sealed by the tourch flame. (d) Toping with PLASFAL @ 2 Kg / Sqm. A layer of blown bitumen of 85/25 or 90/15 is applied @ 1.20 Kg/Sqm on MULTIPLAS. Plasfal memberance shall then bonded on top of MULTIPLAS blown bitumen on 85/25 or 90/15 shall be applied @ 1.20 Kg/Sqm on top of plasfal. The above water proofing treatment shall be carried out by a specialised agency as approved by GE upto G+5 floor without any extra cost.
M&L Cement concrete type D2 1:4:8 (40mm graded crushed stone aggregate) in foundations, filling and mass-concrete as in sunken floor complete all as specified and directed.
M&L 40 mm thick PCC 1:2:4 type B1 as in sub base or sub floor etc complete all as specified and directed.
Excavation in trenches in hard/dense soil not exceeding 1.5 mtr in width and not exceeding 1.5mtr in depth for fuoundation and dgetting out complete all as specified and directed.
M&L for PCC 1:4:8 type D2 as in sub base of SWSG pipes of 150 mm bore including under and haunching against the sides of pipes complete all as specified and directed.
M&L for salt glazed stone ware drain pipes laid in trenches jointed 150 mm bore complete all as specified and directed.
M&L for cutting in to existing manholes for connecting new drain making good to pipes etc of 150 mm bore of pipes complete all as specified and directed.
S&F Factory made precast heavy duty drain/ manhole covers with MS frame and reinforcement complete all as specified and directed.
M&L for Returning filling in including spreading levelling watering and well ramming not exceeding 25 CM in layers in hard/dense soil complete all as specified and directed.
Taking down chowkaths or frames n.exc 1.50 sqm each(without taking off shutter from the frame) each complete all as specified and directed.
Taking down chowkaths or frames Exc 1.5 and n.exc 4 sqm each(without taking off shutter from the frame) each complete all as specified and directed.
S&F Fiber glass reinforced plastic(FRP) door frame of cross section 90 mm X 45 mm having single reveted of 32 mm X 15 mm to receive shutters of 30 mm thickness.The laminate shall be moulded with fire resistsnt grade unsaturated polyster resin and chopped mat.Door frame shall be laminated 2 mm thick and shall be filled with suitable wooden block in all the three legs.Frame shall be covered with fiber glass from all sides.MS stay shall be provided at th bottom to steady the frame complete all as specified and directed.
S&F 30 mm thick FRP panelled door shutter of required colour and approved brand and manufacture,made with fire-retardant grade unsaturated polyster resin,moulded to 3 mm thick FRP laminate for forming hollow rail and style with wooden frame and suitable block of seasoned wood in side the required place for fixing of fittings,cast monolothically with 5 mm thick FRP laminate for panells confirming to IS:14856 complete all as specified and directed.
M&L aluminium alloy powder coated (50 micron ) for partitions,door frames with extruted built up standard tublar sections /appropriate sections of approved make confirming to IS 733 and IS 1285 fixing with dash fastners of required dia and size including filling up the gaps at junctions at top,bottom and sides with required EPDM rubber/neoprene gasket etc. including aluminium snap beading for glazing /paneling CP brass ,stainless steel screws complete all as specified and directed.
S&F aluminium powder coated section door shutters consisting top rail and style 82.77X44.45X1.60 mm thick bottom and lock rail 150X44.45X1.60 mm including jointing clips,aluminium snap beading,rubber gasket,glazing clips,two aluminium handles of size 200mm,01 No. tower bolt 200 mm ,necessary hinges per leaf complete all as specefied and directed. Note:-Glass and boards shall be measered and paid saprately.
M&L Powder coated aluminum windows made out of aluminum tubular frame of section 63.5 x 38.10 x 1.6 mm thick and shutter fixed ,sliding or openable horizontal and vertical members of alum section 47.50 x 44.45 x1.6 mm thick, aluminum beading, rubber gasket and complete aluminum fittings such as hinges tower bolt, stay rod and handle ( sheet glass shall be measured and paid separately) Design and pattern of aluminum windows shall be as approved complete all as specified and directed.
S&F Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.
S&F welded steel wire fabric fixed to steel or wooden members weight n,exc 4 Kg per Sqm complete all as specified and directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S&F 12mm thick prelaminated particle board,interior grade prelaminated both side with decorated lamination fixed with glazing clips rubber beading /gasket and aluminium beading for aluminium doors partitions etc complete all as specified and directed.
Supply and fixed 4.8mm thick tinted glass with glazing clips rubber beading and aluminium beading for aluminium door /windows/partitions of any size complete all as specified and directed.
S&F 150 mm Aluminium tower bolts of extruted section and fixed complete all as specified and directed.
S&F aluminium handle cast type anodised 150 mm long complete all as specified and directed.
S&F 250 mm size Aluminium sliding door bolts with hasp and staples and fixinf clip to sheets of extruded section complete all as specified and directed.
S&F Butt hinges Mild steel cold rolled medium weight 100 mm size complete all as specified and directed.
S&F door closer hydraulically regulated, aluminium body designation No 2, universal type, suitable for door shutter of 701 to 850 mm in width complete all as specified and directed.
S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheets 0.50mm thick of any colour having tensile strength 550 Mpa as in roof covering with self tapping screw complete all as specified and directed.
M&L for removing excavated material /malba out side MoD land in low laying area exc 1.50 km but not exc 5.0 km and depositing where complete all as specified and directed.
Taking down carefully unserviceable copper/aluminium point wiring for light/socket/power socket complete fitting such as light fittings, switches, ceiling roses, pendents, regulators, CI steel/pressed steel terminal boxes etc and making good distrubed surfaces on walls, ceiling, floors etc complete all as specified and directed.
M&L point wiring of one light/fan/exhaust fan/call bell point controlled by one switch of any length as per site requirement with PVC insulated FRLSH unsheathed copper conductor multistranded cable of size 1.5 Sqmm including earth wire of size 1.5 Sqmm in rigid PVC conxcealed conduit for concealed wiring and making good to wall and floor/ceiling complete all as specified and directed.
M&L for one three pin socket outlet 05 Amps independent point wiring controlled by one switch, of any length as per site requirment with PVC FRLSH insulated unsheathed copper conductor cable of size 2.5 sqmm including earth wire of size 2.5 Sqmm in rigid PVC concealed conduit for concealed wiring for 05 Amps Socket out let complete and making good to wall and floor/ceiling complete all as specified and directed.
M&L for one three pin socket outlet 15 Amps independent point wiring controlled by one switch , of any length as per site requirment with PVC FRLSH insulated unsheathed copper conductor cable of size 4.0 sqmm including earth wire of size 4.0 Sqmm in rigid PVC concealed conduit with removable internal /external angle , junctions etc complete excluding MS sheet box and modular top sheet cover, for socket out let 15 Amps Socket out including cutting chases for conduit and sunken boxes and making good to wall and floor/ ceiling all as specified and directed.
S&F modular switch single pole one way 6 Amps 1 module complete all as specified and directed
S&F modular switch single pole one way 16 Amps 1 module complete all as specified and directed
Supply and fix modular socket 6 amp-2/3 pin combined 2 module complete all as specified and directed.
M&L of modular socket 6/16 Amp -2/3 pin combined 2 module complete all as specified and directed.
S&F SPN DB 8 ways with 200 amps rated busbar 230 volt double door complete all as specified and directed.
S&F MCB SP, C-curve, 230 volt 6-32 Amp 10KA complete all as specified and directed.
S&F MCB SPN 415 volt 40 Amp 10KA 'C' curve complete all as specified and directed.
M&L for wiring for circuit/submain wiring alongwith earth wire of FRLS PVC insulated copper conductor,single core cable of size 2X6 sqmm + 1X6.0 Sqmm earth wire in suitable size of concealed PVC conduit 32mm dia medium grade and lugs/thimble with nuts,bollts and washers etc complete all as specified and directed. Note :- 3 run of 6 Sqm cable and one run of PVC coundit shall be measured as one unit (RM).
S&F in replacement of basic all purpose surface and wall mounted LED batten with aluminium housing & integral electronic driver having 10W LED 6500K mirror light with including making electric connection from ceiling rose or connector to ligh complete all as specified and directed
S&F in replacement of basic all purpose surface and wall mounted LED batten with aluminium housing & integral electronic driver having 20W LED 6500K mirror light with including making electric connection from ceiling rose or connector to ligh complete all as specified and directed
S&F in replacement of aesthetically designed 1x1 LED flat panel for surface mounting provides soft lighting and glare free symmetrical illumination light 18 Watt and provision of cable for making electric connection from ceiling rose or connector to light complete all as specified and directed.
S&F in replacement of aesthetically designed 2x2 LED flat panel for surface mounting provides soft lighting and glare free symmetrical illumination light 42 Watt and provision of cable for making electric connection from ceiling rose or connector to light complete all as specified and directed.
Material and Labour for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth wire 4.00 mm dia by means of Copper nuts, bolts and washers. GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI wire of 4 mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar @75mm centre to centre with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover.
S&F and laying GI wire of size 4mm dia for earth continuity conductor complete all as specified and directed.
S&F Ceiling rose, 3 terminal/PVC/polycarbonate, isolated body complete all as specified and directed.
Taking down of ceiling/wall fan and keep in safe custody, replacing bearing bushes and painting with two coats of white/existing paint and marking the MES number and refixing and hanging the same in its original positon including upto 2.0 mtr flexible connection wire 1.5 sqmm two core after completion necessary point wiring, complete all as specified and directed.
S&F in replacement of LED street light fitting 70 watt 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant cover with driver, lamp, bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed.
S&F in replacement of Fan step regulator 120 W 2 modular complete all as specified and directed.
V.V CONSTRUCTIONS
m/s Kailash Chander
M/s Himgiri construction
SAWARIYA ENGINEERS AND CONTRACTORS
DP COMPLEX
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .