Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical found correct |
| 2 | Accepted-Technical S O TSERING WANGDUS R O CHARASA NUBRA | LEH LADAKH | LADAKH | 194101 | Accepted-Technical found correct |
Tender Value
₹5.5 L
EMD Value
₹13,020
Closing Date
18 Mar 2026, 2:00 pmClosed
Executive Engineer PWD RnB Nubra
Executive Engineer PWD RnB Nubra
Construction of 3 Set staff Quarter at Sumoor (by way of Construction of winter friendly washroom at Sumoor. (Under Distt. Capex)
2026_PWD_18597_1
64 of PWD RnB Nubra 2025-26
Open Tender
Civil Works - Buildings
Percentage
25 days
Nubra
Please refer Tender documents.
3 documents required · 3 mandatory
₹1,000
Executive Engineer PWD RnB Nubra.
₹13,020
7 Apr 2026
11 Mar 2026
19 Mar 2026
12 Mar 2026
18 Mar 2026
12 Mar 2026
Earth work in excavation by mechanical means (Hydraulic excavator) in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
Dry stone pitching (any thickness) excluding cost of stones. On Horizontal
Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)
Random rubble masonry with hard stone laid dry in foundation, plinth &walls Laid without bond stone
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4(1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)
Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement, masonry up to floor five level including hoisting and setting in position in cement mortar 1:6 using approved quality mud with carriage of material complete.
15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)
Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more.
Centering and shuttering including strutting, propping etc. and removal of form work for : )Lintel, beams, plinth beams, girders, bressumers and cantilevers.
Suspended floors, roofs, landings, balconies and access platforms.
Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
P/F 50mm Glass wool insulation
Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc budloo
Providing and fixing panelled or panelled and glazed shutters for doors, windowsand clerestory windows fixing with butt hinges of required size with necessaryscrews, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall bepaid separately)
Providing and fixing 35 mm thick factory made laminated veneer lumber doorshutter conforming to IS : 14616 and TADS 15:2001 (Part B) fixing with butthinges of required size with necessary screws, all complete as per directions ofEngineer- in-charge and panelling with panels of : (Note:- Butt hinges and necessary screws shall be paid separately) 12 mm thick pre-laminated particle board (decorative lamination on both sides)grade -1, medium density flat pressed, three layer particle board FPT- I or gradedwood particle board FPT- I, conforming to IS : 3087, bonded with BWP typesynthetic resin adhesive as per IS : 848 and pre-laminated conforming to IS :12823, Grade 1, Type - II marked
Fixing double glazed incl (DGU) conforming of 5mm thrice glass on either side with 12 mm thick inert gape in the DGU shall be processed for reputing glass processer.
Providing and laying 200mm thick mud pushka over talboos with 5mm thick drygrass (Yakzes/spoto/dry paddy straw etc), including ramming at OMC
Applying priming coat: 13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125mm
Providing and fixing ISi marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :300x20x6 mm
Providing and Fixing 100x10 mm tower bolts (barrel type)
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: White vitreous china dual purpose WC pan with white solid plastic seat and lidwith white vitreous china flushing cistern and C.P. flush bend.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception ,, of pipes and fittings:
Providing and fixing G.I inlet connection for flush pipe connecting with W.C pan.
Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR 7.4 U V stabilized & anti - microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Chajge. (Concealed work including cutting chases and making good the walls etc.,)A)PN-16 Pipe, 25 mm OD (SDR-7.4)
B) PN-16 pipe , 32mm OD(SDR-7.4)
Providing and fixing PVC soil waste and vent pipe of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like Prince vector or equvilent brand of 110mm dia
Providing and fixing toilet paper holder c.p brass
Towel rail C.P. brass 750 x20 mm together with a pair of C.P. brass brackets to fit the size of towel rail.
Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screw and washers complete.
Providing and fixing CP brass basin mixer pillar tap of approved quality and make.
Providing and fixing CP brass wall mounted basin mixer pillar tap of approved quality and make
Providing and fixing CP brass stop cock of approved quality and make
Providing and fixing floor jalli
Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Flexible pipe 32 mm dia.
Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: Waste coupling 3.1 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.
Providing and fixing of material for the insulation of pipe with nitrile tube, tapping with cello tape, Rockwood 6 inch per side, wire mesh , polythene, tapping with cello tape aluminium sheet 26 guage cladding with dia complete job including carriage A)25mm
Providing and fixing heat tape 33 watt on PPR pipes made of denforced or chromelox or equivalent make , as approved by Engineer in charge , Complete Job.
Providing and fixing of material for the insulation of Water storage tank with nitrile sheet , tapping with cello tape, Rockwood 6 inch per side, wire mesh polythene, aluminium sheet 26 guage cladding with dia of complete job 19mm thick nitrile sheet.
Providing and fixing ball valve (PPR) of approved quality, High or low pressure, with plastic floats complete. 32 mm nominal bore.(PPR)
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Supplying and fixing 1 inch ¾ inch PVC conduit/casing capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit.
Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed medium class PVC conduit asrequired. A ) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
b ) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excludin modular plate etc. as required. a) 5/6 A switch
b) 3 pin 5/6 A socket outlet
c)15/16 A switch
d)6 pin 15/16 A socket outlet
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 3 Module (100mmX75mm)
6 Module (200mmX75mm)
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. 3 Module
6 Module
6 amps. to 32 amps. ratings , DP MCB, “C” curve, 10 KA breaking capacity
Supplying and fixing brass batten/ angle holder including connection etc. as required.
Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture
Providing and fixing ball valve (PPR) of approved quality, High or low pressure, with plastic floats complete.32 mm nominal bore.(PPR)
Providing and fixing over head shower
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate) finished40 mm thick with 20 mm nominal size stone aggregate
Providing and fixing 15 litre geyser of approved brand and manufacture
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.94 MB
BOQ_44603.xls
BOQ • 0.45 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .