Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 CrAccepted-AOC LACHUNG NORTH SIKKIM GANGTOK 737101 | GANGTOK | NORTH SIKKIM | SIKKIM | 737101 | ₹1.6 Cr | L1 | Accepted-AOC L1 |
| 2 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified |
| 3 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Others-Offline document not received. |
| 4 | Rejected-Technical | - | - | Rejected-Technical Technically Disqualified |
| Sl No | Description | Qty | Unit | DIKI PANZUM LACHUNGPA L1 |
|---|---|---|---|---|
| 1.00 | Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m- All kinds of soil. | 250.22 | cum | 420 ₹1.1 L |
| 2.00 | Filling with available excavated earth in trenches, plinth and side of foundation inbuilding works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete. | 213.71 | cum | 200 ₹42,742 |
| 3.00 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:4:8 mix.(1cement, 4coarse sand, 8graded stone aggregate of 40mm & down size) | 86.79 | cum | 6,430 ₹5.6 L |
| 4.00 | Providing and laying hand packed stone filling in building works with clean hard selected stones, all complete. | 247.81 | cum | 1,010 ₹2.5 L |
| 5.00 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber): Foundation, footings, base of column etc for mass concrete. | 110.27 | Sqm | 1,180 ₹1.3 L |
| 6.00 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber): Beam, lintels, girders, brersumers and cantilevers. | 212.76 | Sqm | 1,160 ₹2.5 L |
| 7.00 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber): Square columns | 125.24 | Sqm | 1,640 ₹2.1 L |
| 8.00 | Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3 (1cement, 1.5 coarse sand, 3graded stone aggregate of 20mm & down size) | 16.29 | cum | 9,300 ₹1.5 L |
| 9.00 | Providing and Laying in position specified grade of reinforced cement concrete excluding the cos tof formwork, finishing and reinforcements. 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge). | 148.18 | cum | 9,850 ₹14.6 L |
| 10.00 | Random Rubble (RR) Stone Masonry in foundation an dplinth in CM 1:3 (1 cement : 3 coarse sand) including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse: 12 graded stone aggregate, 20mm nominal size) at plint level | 25.7 | cum | 9,500 ₹2.4 L |
Tender Value
₹1.6 Cr
EMD Value
₹3.1 L
Closing Date
3 Mar 2026, 5:30 pmClosed
Dy. General Manager (Electrical)
DGM Elect Contract Division Teesta V Power Station Balutar Singtam Distt East Sikkim 737134
Construction of Workshop Building of Teesta V PS at Left Bank Colony, Balutar.
2026_NHPC_897828_1
NH/TSV/Cont/CC-368/NIT-1067
Open Tender
Civil Works
330 days
Teesta-V Power Station, Balutar
As per Tender Document.
5 documents required · 5 mandatory
₹1,180
NHPC Limited
₹3.1 L
Yes
19 May 2026
10 Feb 2026
9 Mar 2026
10 Feb 2026
3 Mar 2026
10 Feb 2026
10 Feb 2026 - 17 Feb 2026
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m- All kinds of soil.
Filling with available excavated earth in trenches, plinth and side of foundation inbuilding works with layers not exceeding 20cm in depth including consolidation of each layer by ramming, watering etc, all complete.
Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:4:8 mix.(1cement, 4coarse sand, 8graded stone aggregate of 40mm & down size)
Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber): Foundation, footings, base of column etc for mass concrete.
Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber): Beam, lintels, girders, brersumers and cantilevers.
Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber): Square columns
Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:1.5:3 (1cement, 1.5 coarse sand, 3graded stone aggregate of 20mm & down size)
Providing and Laying in position specified grade of reinforced cement concrete excluding the cos tof formwork, finishing and reinforcements. 1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge).
Random Rubble (RR) Stone Masonry in foundation an dplinth in CM 1:3 (1 cement : 3 coarse sand) including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse: 12 graded stone aggregate, 20mm nominal size) at plint level
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size, Size of Tile 600 x 600 mm
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm
Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete.
Providing box drain of 30 cm (ht) x 45 cm (width) internal dimension with 1:2:4 Plum concrete (20mm & down) in side walls thickness of 23 cm (hill side) and 30 cm (road side) and 1:3:6 (20 mm & down) base concrete of thickness of 15 cm with standard specification over 15 cm stone soling including providing & laying guard stones complete, as per the direction of the Engineer in Charge.
Providing and laying first class brick work in one brick thick in superstructure of standard size bricks with 1:6 cement mortar (1 cement and 6 clean coarse sand ) as per the direction of Engineer in Charge including curing etc. all complete.
providing and laying 12 mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing complete 1:4 mix
Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete. 1:4 mix
providing, fitting, fixing of 24 BWG pre-painted HULAS sheet roofing with lapping of 150 mm (two corrugation) with G.I hooks, bolts and nut 8 mm dia with bitumen, GI limpet washers filled with white bad including carriage all complete.
Providing fitting fixing ridges or hips of 60 cm overall width of plain 24 BWG Galvanized Sheet fixed with G.I, J or L hooks bolts and nuts 8 mm dia Limpets, Bitumen wahers complete.
supplying, fabricating, fitting and fixing steel tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shape washer etc as per the standard specification and design and direction of Engineer-in-charge all complete.
Providing and fixing anodized aluminum works for doors, windows, ventilators and partitions with extruded built up standard tubular or other section of approved make confirming IS733andIS1285, fixed with rawl plug sand screws or with fixing clips or with expansion hold fasteners i/c necessary filling up the gaps at junctions, at top, bottom and sides with required PVC/ neoprenefelt,etc. Aluminium section shall be smooth, rust free, straight, mitered and joined mechanically wherever required i/c cleat angle, Al snap beading forglazing/ paneling CP brass/ stainless screws, all complete as per design and drawings and the direction of the Engineer - in - Charge.
Providing and fixing glazing in Aluminium doors and windows, ventilator shutters and partition section with PVC/ neosprene gasket with CP brass / stain less steel screws etc. complete as per architectural drawings and direction of Engineer - in- Charge.
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,, excluding the cost of painting with : (i) 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks)
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,, excluding the cost of painting with : (ii) PVC ceiling board with different size and pattern as approved by the Engineer- in-charge and as per manufacturer's specification.
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete.
Providing and painting with acrylic exterior paints of quality and make equivalent toEXCEL,WEATHERSHIELD to give an even shade including brushing the surface clean of dirt,dust etc and sand papering and filling the scratches complete on New surface.
ENAMEL PAINTS: Providing and painting with readymixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface.
Pointing on stone works with 1:3mix cement mortar ( 1 cement, 3 fine sand) (raised or cut pointing )
Providing fitting and fixing 16mm thick valley of 90cm overall width in plain Pre-painted HULAS sheet class/fixed withGI J or L hooks, bolts and nuts 8mm dia GI limpet and bitumen washers complete.
Providing and fixing 15cm wide 45cm overall semicircular Pre painted HULAS. sheet (Class I) gutter with iron brackets 40x3mm size, bolts, nuts, washers etc including making, connection with rain water pipes all complete.
Providing and fixing M.S grills in timber frames of windows with M.S flats with nuts, bolts, and smooth finishing of welded joints/surface with Grills weighing 8.00Kg/sqm as per the direction of Engineer - in- Charge all complete
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter
Providing fitting fixing Fibre Glass reinforced plastic door frames of cross section 90 x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. . The laminate shall be moulded with fire retardant grade unsaturated polyester resin and chopped Mat. Doorframe laminate shall be 2 mm thick and shall be fitted with suitable wooden blocks in all the three legs. The frame shall be covered with fibre glass from all sides. MS stay shall be provided at the bottom to steady the frame.
Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete. 30mm thick panel door
Providing and fixing to existing door shutter 30 mm thick Glass Fibre Reinforced Polyester (FRP) paneled door shutter of required colour and approved brand and manufacture, made with fire-retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden blocks of seasoned wood inside at required placed for fixing and fittings, cast monolitically with 5 mm thick FRP laminate for panels confirming to TADS 6: 1993 and / or IS 14856-2000 including fixing to frames.
Providing and fixing M.S. pressed bright finishedbutt hinges with necessary screws etc. complete.150x31x4mm
Providing, fitting and fixing. Sliding door bolts with nuts and screws etc. complete, Brass (Chromium Plated) Size 300x16mm
Providing, fitting and fixing. Tower bolts 250x10mm with necessary screw etc complete. Brass (Chromium Plated)
Providing, fitting and fixing. Handles 125mm size with necessary screws etc complete. Brass (Chromium Plated)
Providing and Fixing Hydraulic door closer with accessories and screws complete.
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing and fixing white vitreous china cictern with dual flush fitting, of flushing capacity 3ltr/6ltr (adjustable to 4ltr/8 litres), including seat cover and cictern fittings, nuts, bolts and gasket etc complete.
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. THIN RIM TABLE TOP BASIN - WHITE , Size: 530x420x140 mm, Shape - Rectangular,code JDS-WHT-25907N , with Single Lever Tall Boy With 150mm Extension Body & 600mm Long Braided Hoses 15mm CP pillar taps (Code:FON-CHR-40005B. ).(Jaguar or equivalent)
Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: Hand shower (Health Faucet) with 1.20 mtr Fexible Tube with Wall Hook (Equivalent to HINDWARE CAT NO F160122/ ALLIED of Jaquar or similar).
Providing and fitting chromium plated toilet paper holder including the making holes and fixed to timber cleats with CP screws washer etc. all complete:
Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete.
Providing and fitting Porcelain soap tray all complete.
Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete. Size-740 x 20 mm.
Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 100 mm dia. PRINCE / SUPREME or equivalent soil pipe.
Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 75 mm dia. PRINCE / SUPREME soil Pipe
Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes. 100 mm dia. Supreme / Prince
Providing, fitting and fixing. bends of various types plain or a band with access door, insertion rubber washer 3mm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes., 75 mm dia. Supreme / Prince
Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 100 x 100 x 100 x 100 mm Supreme / Prince
Providing, fitting and fixing double equal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete, 75 x 75 x 75 x 75 mm Supreme / Prince
Providing and fixing PTMT grating of approved quality and colour - Circular type - 100 mm nominal dia
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall - 32 mm nominal outer dia Pipes.
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, 20 mm nominal outer dia Pipes
Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) BIB COCK LONG BODY 15 MM DIA
Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL) STOP COCK 15 MM DIA (CONCEALED WORKS)
Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: BASIN MIXTURE
Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: CONNECTING PIPE
Providing and placing on terrace high density polyethylene water storage tank with man hole lid and suitable locking arrangement including making holes for inlet, out let and ball cock including testing etc. all complete: (Sintex or equivalent) 1000 LITERS CAPACITY
Supply and erection of 200A MCCB with enclouser as per given Technical specifications.
Supply and erection of 200A Copper BUS bar chamber as per given Technical specifications.
Supplying and erection of 1 core 35 sqmm 1.1kv grade PVC insulated Copper conductor . as per given Technical specifications.
Supplying and erection of Copper thimble bullet 35sqmm, as per given Technical specifications.
Supplying and erection of 100A LTDB , as per given Technical specifications.
Supplying and erection of 1 core 10 sqmm 1.1kv grade PVC insulated Copper conductor , as per given Technical specifications.
Supplying and erection of MCB DB, TP & N, Double door, 8 Way. as per given Technical specifications.
Supplying and erection of Miniature Circuit breakers (MCB) Single pole 6 - 32 Amps , as per given Technical specifications.
Supplying and erection of Miniature Circuit breakers (MCB) four pole 63 Amps , as per given Technical specifications.
Supplying and erection of RCCB four pole 63 Amps,100mA, as per given Technical specifications.
Supplying and erection of Metal flux box(2 module), as per given Technical specifications.
Supplying and erection of Metal flux box(6 module), as per given Technical specifications.
Supplying and erection of Metal flux box(8 module), as per given Technical specifications.
Supplying and erection of Metal flux box(12/16 module), as per given Technical specifications.
Supplying and erection of White plate with frame(2 module), as per given Technical specifications.
Supplying and erection of White plate with frame(6 module) , as per given Technical specifications.
Supplying and erection of White plate with frame(8 module), as per given Technical specifications.
Supplying and erection of White plate with frame(12 module), as per given Technical specifications.
Supplying and erection of 06 amps switch 1 way 1 module, as per given Technical specifications.
Supplying and erection of Switch 16 amps 1 module, as per given Technical specifications.
Supplying and erection of 16A switch 2 module, as per given Technical specifications.
Supply and Erection of Socket 06 amps 5 pin 2 module universal, as per given Technical specifications.
Supply and Erection of Socket 6/16 amps 2 module, as per given Technical specifications.
Supply and Erection of Blank plate 1 module, as per given Technical specifications.
Supply and Erection of Fan step regulator 100w 2 Module, as per given Technical specifications.
Supplying and installation of ceiling Fan 1200mm, as per given Technical specifications.
Supplying and installation of Heavy duty exhaust , as per given Technical specifications.
Supply and installation of exhaust fan, as per given Technical specifications.
Supply and erection of LED tube light 2 ft, as per given Technical specifications.
Supply and erection of LED Panel light 2*2 ft, as per given Technical specifications.
Supply and erection of recessed LED down light, as per given Technical specifications.
Supply and erection of LED Flood Light 60 Watt, as per given Technical specifications.
Supply and Erection of Ceiling rose, as per given Technical specifications.
Supply and Erection of PVC Round box, as per given Technical specifications.
Supply and Erection of PVC Junction Box, as per given Technical specifications.
Wiring with 2x1.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality PVC surface conduit Pipe and earthing the point with 1x 1.5 sqmm FRLSH PVC insulated copper conductor single core cable as required, as per given Technical specifications.
Wiring with 2x1.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed Alkathine Pipe and earthing the point with 1x 1.5 sqmm FRLSH PVC insulated copper conductor single core cable as required, as per given Technical specifications.
Wiring with 2x2.5 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed Alkathine Pipe and earthing the point with 1x 2.5 sqmm FRLSH PVC insulated copper conductor single core cable as required, as per given Technical specifications.
Wiring with 2x4 sqmm FRLSH PVC insulated copper conductor single core cable in best quality recessed Alkathine Pipe and earthing the point with 1x 4 sqmm FRLSH PVC insulated copper conductor single core cable as required, as per given Technical specifications.
Providing and earthing with chemical earthing as per givien specification.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.59 MB
TenderDocumentCC368.pdf
Tender Documents • 6.87 MB
SafetyManualaug2024.pdf
Additional Documents • 0.73 MB
BOQ_943729.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid