Interior works of Pharmaceuticals and Medical Devices Bureau of India at Tower B, 5th floor at world trade centre, Nauroji Nagar, New Delhi - 110029

Providing and laying in position cement concrete of specified grade exluding the

1.01 4.1 cost of centring and shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) 70.00 Cum 6,326.05 442,823.50

1 BRICK WALL: Half brick masonry with common burnt clay F.P.S. (non modular)

bricks of class designation 7.5 in superstructure above plinth level up to floor V

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) 5 Sqm 1,018.05 5,090.25

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third

2.02 6.15 course of half brick masonry. 5 Sqm 86.45 432.25

AAC WALL (150 MM): Providing and laying autoclaved aerated cement blocks

150mm/230mm/300 mm thick AAC blocks in super structure above

plinth level up to floor V level with RCC band at sill level and lintel level

2.03 6.47 with approved block laying polymer modified adhesive mortar all 15 Cum 6,994.15 104,912.25

complete as per direction of Engineer-in-Charge. (The payment of RCC

band and reinforcement shall be made for seperately).

AAC BLOCK FILLING: Providing and Laying of AAC Block Filling in the Slab Sunk

or Raised Areas as a Back fill or platform. Laying should be done in layers with

pounding done at every level to ensure a proper cavity free installation without

2.04 MR disturbing any existing services in the area. Cost to also include haunching for 10 Cum 5,000.00 50,000.00

plumbing pipes.

3 FINISHING WORK

3.01 13.4 CEMENT PLASTER: 12 mm cement plaster of mix :

3.02 13.60 PLASTIC PAINT: Wall painting with acrylic emulsion paint of approved brand and

13.60.1 Two or more coats on new work 3560 Sqm 137.85 490,746.00

3.03 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an

13.61.1 Two or more coats on new work 20 Sqm 131.45 2,629.00

Digitally signed by AMIT

PUTTY WORKS ON SLAB: Providing and applying plaster of paris putty of 2 mm

thickness over plastered surface to prepare the surface even and smooth

PAINT ON DUCTS & METAL SURFACES: Providing and applying Satin Spray

Paint to AC Duct external metal Surfaces, including paint putty, base coat as pre

manufacturers recommendations and finishing with 2/3 coats of paint of approved

3.05 MR color and make. Surface coating to be achieved as per manufacturer’s 800 Sqm 145.00 116,000.00

recommendations for coverage of paint.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622

(thickness to be specified by the manufacturer), of approved make, in all colours,

shades except burgundy, bottle green, black of any size as approved by Engineer-

in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement

3.06 8.31 mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg 51 Sqm 1,063.45 54,264.00

per sqm, including pointing in white cement mixed with pigment of matching shade

DECORATIVE DADO WALL TILES ABOVE COUNTER: P/F High Quality Ceramic

/ Subway/ Pattern Tiles as Selected by Engineer in charge and installation in

Herring bone type / random etc to be done to bring the surface plumb and minimize

cut tiles/ joints. Tile joints to be finished ist up to 4mm Width and Full Depth

installed with removable spacers and installation in Design, Laying Pattern and

Colour as approved by the Engineer in charge. Quoted item Rate shall include

Wastages as per installation methodology.

WASHROOM ACCENT TILES ON WALLS: Providing and fixing Ist quality ceramic

glazed wall tiles conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of

3.08 MR steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse 18 Sqm 2,200.00 39,600.00

sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in

white cement mixed with pigment of matching shade complete.

Cutting core of required size i.e 100mm, 150mm,300mm of required depth upto

3.09 MR 450mm complete in all respect 10 Nos 1,500.00 15,000.00

4 WATERPROOFING WORK

Digitally signed by AMIT

WATER PROOFING: Providing and laying water proofing treatment to vertical and

horizontal surfaces of depressed portions of W.C., kitchen and the like consisting

of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing

compound conforming to IS 2645 in recommended proportions including rounding

off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement

plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in

4.01 22.3 recommended proportion including rounding off junction of vertical and horizontal 33 Sqm 774.25 25,550.25

surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg.

per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints

of PVC sheet should be 100 mm wide and pasted to each other with bitumen @

Digitally signed by AMIT

Indian Patent Stone Flooring (IPS)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

4.02 11.3 aggregate) finished with a floating coat of neat cement, including cement slurry, but 140 Sqm 545.00 76,300.00

excluding the cost of nosing of steps etc. complete.

11.3.1 40 mm thick with 20 mm nominal size stone aggregate

5 DOOR,WINDOW & PARTITION

Designing, fabricating, testing, installing and fixing in position Curtain Wall

Aluminium Composite Panel Cladding, with open grooves for linear as well

curvilinear portions of the building , for all heights and all levels etc.

Structural analysis & design and preparation of shop drawings for pressure

equalisation or rain screen principle as required, proper drainage of water to

make it watertight including checking of all the structural and functional

Providing, fabricating and supplying and fixing panels of aluminium

composite panel cladding in pan shape in metalic colour of approved shades

made out of 4mm thick aluminium composite panel material consisting of

3mm thick FR grade mineral core sandwiched between two Aluminium sheets

(b) (each 0.5mm thick). The aluminium composite panel cladding sheet shall be

coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin

coating of approved colour and shade on face # 1 and polymer (Service)

coating on face # 2 as specified using stainless steel screws, nuts, bolts,

washers, cleats, weather silicone sealant, backer rods etc.

Digitally signed by AMIT

The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip

Galvanised with serrations and serrated washers to arrest the wind load

movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS

316, Nylon separators to prevent bi-metallic contacts all complete required

to perform as per specification and drawing The item includes cost of all

material & labour component, the cost of all mock ups at site, cost of all

samples of the individual components for testing in an approved laboratory,

field tests on the assembled working curtain wall with aluminium composite

panel cladding, cleaning and protection of the curtain wall with aluminium

composite panel cladding till the handing over of the building for occupation.

Base frame work for ACP cladding is payable under the relevant aluminium

item.s The Contractor shall provide curtain wall with aluminium composite

panel cladding, having all the performance characteristics all complete , as

per the Architectural drawings, as per item description, as specified, as per

the approved shop drawings and as directed by the Engineer-in-Charge.

However, for the purpose of payment, only the actual area on the external

face of the curtain wall with Aluminum Composite Panel Cladding (including

width of groove) shall be measured in sqm. up to two decimal places.

Fixing with carbon steel galvanised dash fastener of required dia and size (to

be paid for separately)

Structural steel work riveted, bolted or welded in built up sections, trusses and

5.03 10.2 framed work, including cutting, hoisting, fixing in position and applying a priming 250 kg 111.95 27,987.50

coat of approved steel primer all complete

Providing wood work in frames of doors, windows, clerestory windows and other

frames, wrought framed and fixed in position with hold fast lugs or with dash

5.04 9.1 fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood 1 Cum 131,576.95 131,576.95

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)

non-decorative type, core of block board construction with frame of 1st class hard

5.05 9.21 wood and well matched commercial 3 ply veneering with vertical grains or cross

bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary 22.00 Sqm 2,015.75 44,346.50

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth

5.06 9.23 on all edges of flush door shutters (over all area of door shutter to be measured). 22 Sqm 401.40 8,830.80

Digitally signed by AMIT

Providing and fixing Stainless steel satin finish SS 304 grade Tower Bolts SS

screws for wooden doors of approved make and model all complete as per the

5.07 MR directions of Engineer-in-charge 25 Each 215.00 5,375.00

Providing and fixing Stainless steel satin finish SS 304 grade Handles with SS

screws for wooden doors of approved make and model all complete as per the

5.08 MR directions of Engineer-in-charge 44 Each 1,256.00 55,264.00

Providing and fixing aluminium die cast body tubular type universal hydraulic door

closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight

5.09 9.83 upto 35 kg and door width upto 700 mm), with necessary accessories and screws 22 Each 1,025.65 22,564.30

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10

mm diameter bolts, nuts and wooden plugs and embedding in cement concrete

5.10 9.53 block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 88 Each 194.35 17,102.80

20mm nominal size).

FRAMED SINGLE GLAZED ALUMINIUM PARTITIONS: Supply & Installation of

Full Height demountable Anodised Aluminium Single Glazed Series Straight

Partitions systems of Matt anodized finish of 100x18/100x25/105x50mm cross

section and 'T' Section, corner Section & 'I 'between glass to glass joint of

proprietary make formed out of the following components as per the detail drawing

Framing: Proprietary anodized aluminium profile using sections on all four sides for

the partition as per manufacturer specifications from FFL up to 2700 mm.

Glazing: 10mm thick toughened Glass for partition system with joint sealed using

3M make clear & non staining double sided tape for glass to glass joint with

Frosted Translucent glass film, cast PVC, self-adhesive vinyl, special CRYSTAL-

effect film to reproduce Sand-blasting effect on glass with customised designs,

thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having

minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C) . All

exposed edges of the glass shall be machine polished. Quoted rate shall include

packing/liner for all partitions as floor level. Capping & gaskets shall be of

EPDM.including fasteners making hole in walls in floors, making door provision.

Digitally signed by AMIT

Providing & Fixing Frosted Translucent glass film, cast PVC, self-adhesive vinyl,

special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with

customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with

adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at

23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on

5.12 MR Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) 10 Sqm 1,400.00 14,000.00

to 15yrs (indoors) must be endorsed by 3M India Limited Engineer in chargeural

Market Department. Contractors payment wouldn't be released until & unless

he/she produces orginal warranty certificate from the manufacturer.

SINGLE LEAF ALUMINIUM FRAME & STILE GLASS DOOR: P/F of Single

Glazed Door-Consisting of Single Shutter Anodized aluminium finish in 75x45 /

65 x40 mm as approved by Engineer in charge of system on all four sides using in

vertical, and in top of the door and on the bottom of the door for 10 mm thick

tempered glass insert with around beading, Door shutter to be fixed , 70mm EPC

with one side key and one side thumb turn, Door closer with hold open, floor

mounted door stopper and side / astragal drop seal for sound barrier. Door Frame

made put of horizontal member on top 36x100 / 50X100 mm and both vertical

member 36x100mm / 50x100 mm Along door jamb with schlegal door trim and

5.12 MR Hinges for 45mm Door as per manufacturers specification. The door frame should

be Compatible to hold the Single glazed aluminium style door shutter. Cost to

include overhead guide rail door closer with hold open , 9168483 Narrow stile

mortise sash lock in Make as approved by Engineer in charge , 92 mm C/C x

35mm backset includes strike plate and screws, K35/K35, double cylinder in 70mm

length with 3keys and fixing screws in SNP finish.

Handle, lock , Door closer , hinges hardware included in the rate etc for complete

door installation.

Digitally signed by AMIT

DOUBLE LEAF ALUMINIUM FRAME & STILE GLASS DOOR: P/F of Single

Glazed Door-Consisting of Double Shutters Anodized aluminium finish in 75x45 /

65 x40 mm as approved by Engineer in charge of system on all four sides using in

vertical, and in top of the door and on the bottom of the door for 10mm thick

tempered glass insert with around beading, Door shutter to be fixed with Narrow

stile , 70mm EPC with one side key and one side thumb turn, Door closer with

hold open, floor mounted door stopper and side / astragal drop seal for sound

barrier. Door Frame made put of horizontal member on top 36x100 / 50X100 mm

and both vertical member 36x100mm / 50x100 mm Along door jamb with schlegal

door trim and Hinges for 45mm Door as per manufacturers specification. The

door frame should be Compatible to hold the Single glazed aluminium style door

shutter. Cost to include overhead guide rail door closer with hold open 9168483

Narrow stile mortise sash lock ML NSL 92 , 92 mm C/C x 35mm backset includes

strike plate and screws, EPC K35/K35, double cylinder in 70mm length with 3keys

and fixing screws in SNP finish.Lever handle, lock , Door closer , hinges hardware

etc for complete door installation.

VERTICAL TUBE TRANSOM PANEL: P/F of Proprietary anodized aluminium post

profile integrated to framing system up to 2700 mm High as per sections of Matt

anodized finish of 200x100/40mm with specs and finish as specified as per

Aluminium Glazing to be installed adjacent to doors having provision of Access

Control as per the Door Schedule of Engineer in charge. Finish & Colour as

approved by Engineer in charge.

Digitally signed by AMIT

SINGLE LEAF FIRE RATED DOORS SOLID CORE: Supply & installation of

approved make 40mm thick light weight asbestos free Single Leaf fire proof doors

of 120 minutes fire rating duly tested for Integrity & Insulation Criteria confirming to

IS: 3614 Part 2 and BS: 476 part 22 at Fire Research Laboratory Central Building

Research Institute Roorkee with standard heating conditions as specified in IS:

3809 - 1979 and BS: 476 part 20 & 22 1987 to achieve the required integrity &

insulation (i.e. to restrict the heat radiation, temperature rise on the non fire side to

the maximum of 140 degree Centigrade above the ambient temperature on the

unexposed surface of the shutter) complete in all respect as per detail.Door Frame:

Formed out of 1.6mm thick Galvanized steel sheet pressed form to double rebate

profile of size 100mm x 65mm as per IS277. Shutter: Formed out of 2 NUMBER.

1.6mm thick Galvanized steel sheet with infill of fire rated Acrylic Sealant and non-

combustible core (Rock wool 96Kg/M³) bonded to both faces of sheet with lock

seam joints at stile edges and internal reinforcement at top, bottom and stile edges

for fire rating. Finish : Door frames and shutter shall be finished with primer coating, Nos 65,000.00 195,000.00

stoved zinc phosphate primer (35 micron DFT) and thermosetting Polyurethane

aliphtic grade paint (35 micron DFT) of approved colour. Vision Panel : 1 no. of size

upto 450 mm. x 450mm. Vision panel formed out of 6mm thick Pilkington Pyro

shield of 120 minutes fire rated clear wired glass with metal beading as per detail.

Contractor to make provision for fixing of Access Control System Device where

ever required as per detail. Rate shall include for supply and fix 3mm thick base

plates, all joints of frames with provision for anchor bolt fixing to wall/ RC surface,

reinforcement pad for fixing of door closers, factory finish, pre-punched cut outs to

receive hardware's and iron mongery. Rate shall also include for grouting the frame

with cement slurry between Wall & Frame and silicone sealant as per approval to

the required thickness as per manufacturer’s specifications. Cost to include

Yale/Geze make 25/32 mm x 450/600 mm D Offset Handle /Panic Bar as

approved by Engineer in charge with facility for Access control integration and

pelmet arm Door Closer. All Hardware shall be as per Fire Norms and approved

Shop Dwgs by the Engineer in charge.

SHAFT SHUTTER: P/F 35 mm Thk 2 Hrs FR readymade shaft shutters with

frame mounted with 3" ball bearing hinge customised to cover the opening size

5.16 MR with L Key locking mechanism. The Frame and Shutter to be finished with Powder 16 Sqm 18000.00 288,000.00

Coated Finish on all surfaces as approved by the Engineer in charge. All Hardware

used to be 2 HR fire Rated.

5.17 9.133.2 Multipurpose cement board reinforced with suitable fibre cement screw.

9.133.2.1 8 mm thick cement fibre board as per IS : 14862 10 Sqm 1209.10 12,091.00

6 PARTITION WORK

Digitally signed by AMIT

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including

a coat of approved primer on one face, and fixed on wooden / steel frame work,

6.01 9.140 complete as per direction of Engineer-in- charge (Frame work shall be paid for

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type 200 Sqm 1,084.60 216,920.00

Providing and fixing metal system up to ceiling height, which includes frame work

made of special section power pressed/ roll form G.I. sheet with zinc coating of 120

GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and

0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling soffit

using rawl plugs with screw at 600mm centers, with first & last fixing point at not

greater than 50 mm from either end. Boral C studs 50mm wide having one flange

of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed

perpendicularly within the flanges of floor and ceiling channels located directly

opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap

between C Stud and web of U Track.

Providing and fixing of 4mm MDF sheet on existing plywood partition / panelling

with 4mm wide grooves in approved pattern complete in all respects with adhesive

6.03 MR and all accessories as required.The grooves to be finished using paint of approves 100 Sqm 450.00 45,000.00

Digitally signed by AMIT

Providing and fixing partition upto ceiling height consisting of G.I. frame and

required board, including providing and fixing of frame work made of special

section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide having equal

flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of

610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or

suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm

wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610

mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along

both ends of partition fixed flush to wall with suitable anchor fastener or metal

screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards

9.105 to both side of frame work by 25 mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300 mm centre to centre. The boards are to be

fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing

channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be

provided at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x

25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per

manufacture's specification and direction of engineer in charge all complete.

75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass

Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board

6.05 9.105.1 with BIS certification marks) 50 Sqm 1,797.65 89,882.50

75mm overall thickness partition with 12.5 mm thick double skin tapered edged

plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS

certification marks)

SINGLE GYPSUM EXTRA SKINNING: P/F Plain 12.5 mm One Side High density

6.07 MR Gypsum Board Skin with Taping and Jointing work 50 Sqm 1,200.00 60,000.00

HIGH LOAD DENSITY GYPSUM PLASTERBOARD SKIN: P/F Plain double skin

of 12.5 mm on one side considering high load factor of minimum 30 kg per screw

(SF of 2) Plasterboard Skin. Cost to include reinforcement of Ultra Closed Studs of

6.08 MR 48 mm 48 mm x 0.6 mm . Approved by Engineer in chargeas approved by the 20 Sqm 900.00 18,000.00

Engineer in charge. cost to include reinforcement of Ultra Closed Studs of 48 mm

48 mm x 0.6 mm .t Approved by Engineer in charge

7 FLOORING WORK

Digitally signed by AMIT

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified

by the manufacturer) with water absorption less than 0.08% and conforming to

IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20

mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement

slurry @3.3 kg/sqm including grouting the joints with white cement and matching

7.01 11.41 pigments etc. The tiles must be cut with the zero chipping diamond cutter only .

tiles will be done with the notch trowel, plier, wedge, clips of required thickness,

leveling system and rubber mallet for placing the tiles gently and easily.

Double charge vitrified tile polished finish of size of Tile 600 x 1200 mm

MOSAIC TILE: Providing and fixing made in India Glass mosaic tiles at Floor &

finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design ,

fixing in customize design as per direction of Engineer-in- Charge. The glass

mosaic tiles to be fixed on the wall surface with the help of approved Adhesive AD

HOC (2,7 kg) + Epoxy coloured grout FILLGEL PLUS UVR (3 kg) applied at the

rate per sqm. The rate is inclusive of all operation, material and required pattern

ENGINEERED WOOD FLOORING:Providing and Fixing of Compct

ENGINEERED WOODEN FLOORING Panel 12.5x145 x 1820 Total thickness 14

mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out of 6 m2 per

pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489

± 3 mm Core board PEFC controlled sources Spruce Backing layer PEFC

controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic

Width Uniclic Multifit Domestic use Conditions in each pack 33 years Uniclic -

Multifit connection Lifetime Commercial On request "Wood for Life" Edge Protect +

Provides a warranty on build-up of residue dirt along the edges due to

maintenance over the years 10 years "Wood for Life" Surface & Edge Protect

+ (lacquered products only) Provides a warranty on pollution of surface structure

and a warranty on build-up residue dirt along the edges due to maintenance over

the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV

7.03 MR cured Oiled finish 2 layers UV cured Lacquer Anti-scratch top coat 5 - 7 layers 140 Sqm 7,322.00 1,025,080.00

Natural variance Due to nature, visual surface can deviate from samples

Surface treatments cf catalogue/website Nature Marquant Vibrant General

aspect of installed EN 13489 Lipping - difference in height (mm) ≤ 0,20

difference in width (mm) ≤ 0,20 cupping lengthwise % ≤ 0,1 cupping in width %

≤ 0,2 Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30 Changes

30 - 85 % RH Cupping short side min % ≥ - 0,20 Open joints short side (mm) ≤

0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating Suitable of special

installation instructions.or its equivalent as per direction of Engineer Incharge

Digitally signed by AMIT

Providing and fixing removable raised/false access flooring with system and its

components of approved make for different plenum height with possible height

adjustment upto 50 mm, comprising of modular load bearing floor panels supported

on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per

7.04 11.54 the Engineer in chargeural drawings, as specified and as directed by Engineer-in-

charge consisting of:

a) Providing at required spacing to form modular framework, pedestals made out of

GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to

the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal

tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully

threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud

for level adjustment upto 50mm, locking and stabilizing the pedestal head in

position at the required level. The pedestals shall be fixed to the subfloor (base)

through base plate using epoxy based adhesive of approved make or the machine

screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized of rectangular

size 570x20x30x0.80mm thick having holes at both ends for securing the stringers

on to the pedestal head using fully threaded screws ensuring maximum lateral

stability in all directions, the grid formed by the pedestal and stringer assembly shall

receive the floor panel, this system shall provide adequate solid, rigid support for

access floor panel, the system shall provide a minimum clear uninterrupted

clearance between the bottom of the floor for electrical conduits and wiring etc. all

complete as per the Engineer in chargeural drawings, as specified and as directed

by the Engineer-in-charge.

Digitally signed by AMIT

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade

Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access

Floor panel shall be steel welded construction with an enclosed bottom pan with

uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel

Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64

welds in each dome and 20 welds along each flange). The panel should be

Corroresist epoxy coated for lifetime rust protection and cavity formed by the top

and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core

mixed with lightweight foaming compound. The access floor shall be factory

finished with Anti-static High Pressure laminate with Non Warp technology upto

1mm thickness for superior adhesion and Surface flatness within 0.75mm.The

panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x

25mm without collapse in the centre of the panel which is placed on four steel

blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum

1250 kg/sqm and an impact load of 50kg all complete as per the approved

manufacturers specification and as per the direction of Engineer-in-charge. All

specification must be printed on the side of the panel to ensure the quality of the

450 mm Finished Floor Height (FFH).

RECEPTION GRANITE FLOOR: Providing Installing & Fixing with specified

adhesive by Neolith, a sintered Stone made up of granite minerals like quartz,

fedspar with required strength and hardness. Waterproof, Resistant to UV rays,

scratches, lightweight and recyclable. 6 mm thickness. The colour shall be

7.05 MR approved as per the choice of the Engineer in charge and as per the theme of the 11 Sqm 5,000.00 55,000.00

project. The sheet shall be in SILK FINISH with perfect linear reflection. The cost

shall include cutting of the tile in different

ALUMINIUM SKIRTING: P/F High Grade Sand Blasted Finish Aluminium skirting in

colour and Finish as approved by Engineer in charge of easy stick type with all

aluminium trims and Aluminium champhered corners as per Engineer in charge’s

7.06 MR approval fixed as per detail and Engineer in charges instructions. Skirting to be 750.00 Rmt 350.00 262,500.00

affixed on to plastered/POP finished wall surface.

MR THROW RUGS: Providing and laying Rugs Broadlooms in Hand Tufted to

Customised design of approved size in locations as directed. The cost shall

7.07 include all adhesive necessary items required for installation. 25 Sqm 3,520.00 88,000.00

Digitally signed by AMIT

MR Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6)

only; Multi-Level Pattern Loop, manufactured using 100% solution dyeing process,

Tiles of size 61cms x 61cms equivalent as per direction of EIC and site

requirement with SSP® Soil Protection treatment ™ or equivalent containing

properties of Stain Repel, Tile- 100% PVC Free/ 100% Bitumen Free/ 100%

Recyclable - backing system with recycled content, made from thermoplastic

polyolefin compound with reinforcing layer high-performance environments

requiring modular flooring, having tufted yarn weight of 542.5 gsm/sqm and

7.08 average yarn density of Minimum 6128 oz/cu. yd. or more, Nominal total thickness 50 Sqm 2,600.00 130,000.00

5.84 mm minimum, Radiant Panel class 1rated ( ASTM E648), NBS smoke <

450, Pill test -Passed, Anti Static Property less Than 3.5 kv, Texture

Appearance Retention Rating of 3.5 for Severe Use, Anti Microbial Treatment-

Passes (AATCC-174). CRI Green Label Plus is certified for indoor air quality,

including fixing/ installation with Low/ Zero VOC content Adhesive. Impact Sound

(ISO 10140-3) 20 dB & Sound absorption (ISO 354)

8 FALSE CEILING WORK

1 Providing and fixing false ceiling at all height including providing and fixing of frame

work made of special sections, power pressed from M.S. sheets and galvanized

with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm

and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash

fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of

required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the

8.01 12.45 ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26

mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting clips made out

of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the

perimeter of ceiling fixed to wall/partition with the help of rawl plugs

Digitally signed by AMIT

at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including

fixing of gypsum board to ceiling section and perimeter channel with the help of dry

wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a

flush finish of tapered and square edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing compound in 3 layers covering

upto 150 mm on both sides of joint and two coats of primer suitable for board, all as

per manufacturer's specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of perimeter channels

suitably fixed, all complete as per drawings, specification and direction of the

Engineer in Charge but excluding the cost of painting with

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)

12.45.1 :2011 (Board with BIS certification marks) 750 Sqm 1,145.95 859,462.50

TRAP DOORS - HVAC UNIT: Providing and Fixing and Installation of Trap Door

made of 6mm thick wpc board , finisanhed with laminate/paint as per requirement ,

including framworks, Single Leaf /Double leaf with all necessary hardwares as per

8.02 MR Interior Design and the direction of Engineer-in-charge 25 Sqm 1,249.00 31,225.00

ACCESS PANELS: P & F ready made acess panels in ceiling made of Metal and

HDMHR pane of Max size 600mm x 1200 mm in gypsum ceiling of manufacturer

supplied prefab recessed frame placed inside gypsum ceiling frame work which is

fixed to gypsum board on all sides with push pull mechanism, panel to be cladded

8.03 MR with matching paint/Finish of the surrounding ceiling Member, complete as per 25 Sqm 1,850.00 46,250.00

design & drawing & instructions of Engineer in charges.

GYPSUM BULKHEAD: P/F Ceiling Vertical Bulkhead Design Supported on True

Slab till false ceiling as Approved by Engineer in charge as per specs of Item

8.04 MR E.1.Cost to Include Acrylic Emulsion paint as per this BOQ item In approved 96 Sqm 1,400.00 134,400.00

colour for all exposed vertical and horizontal surfaces.

LAMINATED PLY CEILING: Providing and fixing Wooden ceiling fabricated of 19

mm BWP Ply as approved by the Engineer in charge and 1 mm Thk Laminate

mounted on the framework as specified for Gypsum Ceilings in this Tender, rates

quoted shall also include the cutting an provisioning of Light fixtures and other

services. Overall specs to be same as the Gypsum Ceiling in this Tender.

Provision for making Grooves as per the instruction of the Engineer in charge.

Installation to be done as per the manufacturers proprietary Specs according the

Ceiling Design of the Engineer in charge.

Digitally signed by AMIT

METAL BAFFLE CEILING: Providing and fixing decorative ceiling system

manufactured from anodised /powder coated lightweight aluminium Baffles The

system comprises baffles upto 50 mm wide & height of the baffle shall be upto

150mm manufactured out of 0.50mm Thick GMS, installed at upto 150mm C/C

distance with Straight / Curved Edge profile. The profile if required by Engineer in

charge shall have perforation design as per patttern and dia approved by Engineer

in charge.The carrier rails run perpendicular to the baffles. Individual baffle lengths

between 300 and 2400 mm can be selected. Baffle ceiling are supplied with the

end cap matching the similar finish of baffle. Tolerances according to TAIM, DIN

EN 13964 and quality controlled to ISO 9001:2015 approved by SIS. Substructure

for Vertical baffle system consisting of 30X40X30X1.2mm Thick GMS C Channels

installed perpendicularly to baffles at 1200 mm c/c. The C channels must be

connected to one another with longitudinal C channel connectors. The entire ceiling

module shall be suspended with 6mm diameter galvanized steel threaded rods

from the true ceiling officially approved anchor fasteners maximum at 1200mm

Centres as per the requirements of DIN EN 13964 and the statics of the system.

Ensure horizontal and flush alignment during installation.

Finish: RAL 9016 white Finish or any other colour in solids or wood textured and

printed as per approval of the Engineer in charge.

8.06 MR Manufacturer shall have the fully automatic powder coating system with power and 125 Sqm 6,200.00 775,000.00

free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with

latest modern technology with fully automatic inline Pre-treatment using nano

technology, Inline automatic water Drying system after pre-treatment.Installation to

be done as per the manufacturers proprietary Specs according the Ceiling Design

of the Engineer in charge. Shop Drawing of formation pattern to be furnished by

contractor for approval of the Engineer in charge.

Digitally signed by AMIT

PET BAFFLES: Providing and fixing baffles in suggested cross section in upto 200

mm depth or as approved by Engineer in charge fabricated with upto 150 mm

wide in box/U Section 9mm thk PET in design and CNC cut profile as per the

instructions of the Engineer in charge .Cost to include upto 100 mm spacing hung

from Existing Ceiling and Slab in Colour and Profile as designed by Engineer in

charge, cost to include Clutch wire / M6 threaded rod or approved hangers with

8.07 MR suspension height void minimum 150 mm. Installation to be done as per the 42 Sqm 5,250.00 220,500.00

manufacturers proprietary Specs according the Ceiling Design of the Engineer in

charge. Shop Drawing of formation pattern to be furnished by contractor for

approval of the Engineer in charge.

PET FELT PANEL FLOATING CEILING: Providing and fixing factory finished PET

panels in thickness of up to 9 mm and 200 Kg per Cum in design and CNC

embossing as per the instructions of the Engineer in charge in 3D Profile .Cost to

include PET Panels pasted on 19 MM HDMHR Membrane hung from Existing

Ceiling and Slab in Colour and Profile as designed by Engineer in charge, rates

quoted shall also include the cutting an provisioning of Light fixtures and other

8.08 MR services. Overall specs to be same as the Gypsum Ceiling in this Tender. 120 Sqm 3,500.00 420,000.00

Provision for making Grooves as per the instruction of the Engineer in charge.

Installation to be done as per the manufacturers proprietary Specs according the

Ceiling Design of the Engineer in charge. Shop Drawing of CNC pattern to be

furnished by contractor for approval of the Engineer in charge.

Digitally signed by AMIT

TILE GRID CEILING - MINERAL FIBRE 600 X 600 MM (0.7 NRC): General Notes

:Providing and Fixing proprietary modular ceiling system consisting of Grid & Tile

System in 15 mm Tile Thk and NRC 0.7 and CAC of 33 DB with 20 mm Thicknes

Tegular Edge of size up to 600 x 600 Module with 15 mm Groove Silhouette

Microgrid Grid or equivalent with suggested generic specs as follows:

1. Tiles of , nominal size range or equivalent with Tegular edge.

2. Ceiling grid to be of hot dip galvanized steel system, power coated white finish,

including main runners, cross tees and wall angles. The tile shall be laid on profile

grid system with 15mm white flanges incorporating a 6mm central reveal in

white/black colour. Main Runners & Cross Tees to have mitred ends & “birds

mouth” notches to provide mitred cruciform junctions. The T Sections have a

galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test.

8.09 MR 3. Main runners to be spaced at 1200mm centres, fixed to soffit by approved 400 Sqm 1,850.00 740,000.00

hangers at 1200 mm distance. First and last hangers should not be at a distance of

more than 450 mm from the adjacent wall. module to be formed by fixing 600 mm

cross tee between centre of 1200 mm cross tees.

4.Wall angle to be secured to wall at 450mm centres. tile shall be laid on reveal

profile grid system with 15mm white flanges incorporating a 6mm central reveal in

white/black colour and with a web height of 45mm. Overall Light Reflectance in the

Range of 80 - 85 %. Overall system to be designed as per manufacturer specs

following ASTM C 635, 636 & 645 with proper lab certification to be furnished.

METAL TILE GRID CEILING: P/F Metal Lay-In tile, Micro Look grid structure,

1.5mm dia holes,18% open area,Diagonal Pitch. The ceiling tiles Module size of

8.10 MR 600x600 in 0.5mm galvanized Powder coated metal perforated tile of size 600 x 60 Sqm 1,600.00 96,000.00

ACCOUSTIC GYPSUM PERFORATED CEILING: Providing and Fixing

suspended ceiling consisting of 12.5 mm thick Gyproc Soundblock Rigitone/ Knauf

Danoline or equivalent as approved by Engineer in charge plaster board or

equivalent as approved by Engineer in charge With 50 mm Rockwool suspended

on GI framework. Perforated Gypsum Ceiling with T Grid System

Providing and fixing Perforated glass fiber reinforced Gypsum board comprises of

12.5 mm gypsum core of size 600mm x 600mm with a geometric array of 6

mm perforations of round form. The reverse of the board incorporates an

acoustic fleece which provides sound absorption performance. Perforation Size :

6 mm round, Perforation Spacing - approximate 15mm c/c, Perforation Area :

approximate 10 to 12% with NRC value greator than 0.60. Cleaneo Technology -

Active reduction of air polluants due to Cleaneo Technology, effectively reduces

concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as

unpleasant odours from e.g. food or cigarette smoke

Air purification properties tested according to CEN standards and VDI guidelines by

Fraunhof Insistute for Building Physics

The false ceiling surfaces shall be prepared to the satisfaction of the Engineer in

charge, and shall be applied with two coats of primer and Paint as per direction of

Digitally signed by AMIT

charge, and shall be applied with two coats of primer and Paint as per direction of

Engineer in charge.

Notes: Two coats of gypboard primer to be applied to finished surfaces and then

smoothened using chalk putty as directed in order to receive the Paint as instructed

by the Engineer in charge.

MR All junctions between material , columns, wall -ceiling etc. to have a 6mm groove 80 Sqm 3,400.00 272,000.00

with 12 x 12 x 1.2 mm Thk Aluminium `L' angle/shadow angle as per detail.

quoted to include vertical drops, Bulkheads , level and Alleys as per the

Instruction of the Engineer in charge to be paid in the Installed Area. Rate to also

include the making of cove and all cut-outs required for light fixtures, smoke

detectors , Up to 250 mm wide return air slits & A/C boxing wherever indicated.

and other services cut-outs complete as directed by Engineer in charge. Shop

Drawing of perforated pattern and joints to be furnished by contractor for approval

8.11 of the Engineer in charge."

BACKLIT STRETCH FALSE CEILING: Providing and fixing demountable ceiling

made of Polyester knitted fabric coated with polyurethane 309 T Translucent white,

Weight: From 200g to 250g / m2. Fire Rating:B s1 d0 (Ex M1) / Flame retardant.

Fabric has translucid fabric for backlighting purpose with CE (Complies with

European Union norms), stretch on self supporting frame Profile. The rates should

be inclusive of the necessary frame works for the fixing arrangement and 19 mm

thick FR back ply for backing surface & 36 watt chipped module / strip 4000 K of

Samsung / Philips/ Havells make at distance of 6" c/c with ballast complete with

trap doors as advised. Warranty: 2 years on driver & 5 years on LED Lighting.

Lights to be placed in such a manner that no dark patch appears or zebra pattern

9 MR appears. Once lights are installed stretch ceiling to give uniform output with 14 Sqm 8,100.00 113,400.00

required lux level as per Engineer in charge / lightingconsultant Barrisol/ Clipso /

Euroceil or Equivalent Make as approved by Engineer in charge. Cost to also

include printing in colour and design on the membrane as approved by the

Engineer in charge. Cost to include 1Metre x 1 Metre mockup with Lights installed

for review and approval if required by the Engineer in charge and Client prior to

fabrication and installation of actual product.

Digitally signed by AMIT

LACQUERED GLASS CLADDING: P/F up to 6mm Thk Lacquered Glass on a

backing of Existing Partition and Panelling and faced front side with up to 6 mm

thick MDF and finished with 6mm Lacquered Glass Super White Colour or As

Approved by the Engineer in charge to make it flush in level with adjoining

surfaces. Cost to also include Neutral Silicon Adhesive or equivalent manufacturer

suggested adhesive as per approved Design make and edge polishing. Item Billing

shall be done on Installed area on site with wastage to be included in the rates.

Digitally signed by AMIT

3D PET FELT ECHO PANEL WITH PRINTING: Providing and fixing factory

finished Smart PET panels in thickness up to 12 mm of 0.5 NRC in wave and

other 3D pattern as per design and embossing as per the instructions of the

Engineer in charge. Cost to include screen printing work and Provision for making

Champhered Edges and Grooves in different cuts like fishbone etc as per the

9.02 MR instruction of the Engineer in charge. Installation to be done as per the 82 Sqm 4,250.00 348,500.00

manufacturers proprietary Specs according the Design of the Engineer in charge.

Shop Drawing of pattern and panel joints to be furnished by contractor for approval

of the Engineer in charge.

1 Providing and fixing 4mm thick coir veneer board, ISI marked IS : 14842, plain

9.03 a 8.29 lining with necessary screws, priming coat on unexposed surface etc., complete. 45 Sqm 1,549.45 69,725.25

9.03 b MR PU POLISH: PU polish in shade as per Engineer in charge’s approval. 45 Sqm 1,532.00 68,940.00

1 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in

gloss / matt/ suede finish with high density protective surface layer and reverse

9.04 9.127 side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality.

PREMIUM TEXTURED VINYL WALL COVERINGS: P/F Decorative Vinyl covering

of upto 34 oz /Sq yd as Approved by Engineer in charge on Existing Partition and

Panelling finished with water resistant stain resistant vinyl coverings Selection as

per Engineer in charge’s approval. Wall /Ceiling Base to be prepared by applying

coat of cement primer scrapped and smoothened to plumb level on backing panel

of Gypsum/ MDF, intermediate grooves to be finished with Paint. Including cost of

9.05 MR providing grooves and/Wall with divisions in pane as per Engineer in charges 150 Sqm 1,800.00 270,000.00

approval. Cost to also include Neutral Silicon Adhesive or equivalent manufacturer

suggested adhesive. Rate to Include Wastage as per design.

Note : Area to be measured and paid for the actual installed on site.

Digitally signed by AMIT

ROLLER SHADES: Providing & supplying of Window Blinds as per the approved

sample in required shade and style consisting, of Roller Blindscomprising of optima

screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G

weight per sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance

standard – NFPA 701-89 small testing ISO-5659-2 .Thetear resistance should be

complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall

be of clutch forquick,easy

andsafeinstallation,moldedplasticwithsteelspringsupportandinserted intothe

tubeend.Itshallbe drivenby a ball chain pulley with ball chain and can be positioned

at right side or left hand side of the Shade.The Shade whenlowering or raising,

shall be automatically locked in position upon release of the ball chain by means of

a built in friction lock.Universal clutch for left and right hand operation.Chain Gear

Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel location

pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for

ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided

with covers and used in right hand or left handpositions differentiated by the

acceptance of the of the rectangular drive unit support or the round idler plug

pin.Can beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The

Bracket should be protruding outside maximum of80mm.The ROLLER TUBE shall

be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm

9.06 MR and shallincorporateakeywayintegral withthetubetoaccommodatethespline. The 264 Sqm 2,760.00 728,640.00

BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAINshall be 2mm diameter cord with 4.5mm diameter acetal balls molded

co-axially toit on6mm pitchtoformanendless ballchain.It is usedforraisingor

loweringactionoftheshades. including Providing and Fixing Somfy or equivalent

make motors as per manufacturer specifications in rating and configuration as per

blinds suppliers specifications and load capacity . Cost to include wireless remote

per zone as approved by Engineer in charge. All accessories and fittings to install

motors with Blind/Curtains shall be included in the cost.

Digitally signed by AMIT

Providing and fixing thermal insulation with Resin Bonded Fibre glass wool

conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G

Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in

position by criss crossing GI wire etc. complete as per directions of Engineer-in-

WOODEN MOULDING- Providing and fixing wooden moulded corner beading of

triangular shape to the junction of panelling etc. with iron screws, plugs etc.

9.08 MR complete MDF Finished 18X30 mm (base and height) 100 RM 75.25 7,524.55

WOODEN MOULDING- Providing and fixing wooden moulded corner beading of

triangular shape to the junction of panelling etc. with iron screws, plugs etc.

9.09 MR complete MDF Finished 20x50 mm (base and height) 100 RM 153.00 15,300.00

WOODEN MOULDING- Providing and fixing wooden moulded corner beading of

triangular shape to the junction of panelling etc. with iron screws, plugs etc.

9.10 MR complete MDF Finished 12x25mm (base and height) 100 RM 111.00 11,100.00

WINDOW CILL: Fabricate and install 250x200 (WxH), window cill along external

windows. Cill to be constructed out of 18 mm Plywood, finished with 1mm. Thk

laminate shade as per Engineer in charge’s approval. Cost to include edge margin

9.11 MR in teak wood and poilshed in colour matching laminate. 85 RM 1,770.00 150,450.00

PELMET: Fabricate and install pelmet made of 18 mm thick Plywood, up to 300

mm high and 300 mm width in line with external glazing as per details of Engineer

9.12 MR in charge. Rate to include finishing exposed surfaces of the Pelmet with enamel 85 RM 1,770.00 150,450.00

paint of approved shade or 1mm laminate as approved by Engineer In Charge.

MIRROR PANELLING: P/F Mirror on a backing of Hollow Panelling of up to 75

mm depth and formed with 12 mm thick PLYWOOD with provision of light coves

and finished with 6mm Mirror of Glass framed in Metal Jamb Frame of PVD finish

of Approved make to be flush in level with adjoining surfaces. Cost to also include

Neutral Silicon Adhesive or equivalent manufacturer suggested adhesive as per

approved Design make and edge polishing. Cost to also include frosting/de

mirroring as per Engineer in charges Design.

Digitally signed by AMIT

10 Miscellaneous Work

General Notes:Fabricating and fixing built up storage cupboards as per detail. All

shutters, Carcass sides and Top, bottom along with shelves to be made out of

19mm BWP Ply as approved by the Engineer in charge. The storage Back to be

formed of 19 mm thick BWP Ply as approved by the Engineer in charge. All

internal and External surfaces to be faced with 1 mm thick laminate of approved

shade. Laminate to be pasted with High Quality fast setting Adhesive , Cost to

include all necessary fittings like tension hinges, ball catchers, tower bolts, locks,

handles, adjustable shelves etc. as per directions of Engineer in charge.

Adjustable Shelves to be provided as per the requirement and to be and to be

supported on SS Brackets. All the door and other exposed edges shall be Finished

10.01 with the PVC Edge Banding of approved make and Colour with provision of finger

grooves. Drawers shall be provided as per the requirement and Drawings of the

Engineer in charge with Handles and Soft Closing Channel as approved by the

Engineer in charge .

The storage to have all necessary hardware, locks, handle etc. complete as per

detail. All provision of fixing/hanging the Storage on the Wall shall be done and

included in the quoted rates.

FULL HEIGHT LAMINATED HINGED SHUTTER STORAGE: Providing and fixing

storage of depth up to 450 mm with Caracas and general Spec as 10.01 as

approved by the Engineer in charge and faced with 1.00 mm thick laminate and

PVC edge Banding as per the selection of the Engineer in charge.

OVER HEAD STORAGE LAMINATED: Providing and fixing storage of depth up to

450 mm with Caracas and general Spec as 10.01 as approved by the Engineer in

10.01.2 MR charge and faced with 1.00 mm thick laminate and PVC edge Banding as per the 11 Sqm 9,775.00 107,525.00

selection of the Engineer in charge.

COUNTER - LAMINATE STORAGE WITH GRANITE TOP: Providing and fixing

storage of approved height and depth up to 650 mm with Caracas and Shutters/

Shelves / Drawers to be made out of 25 mm thick BWP HDF board as approved

by Engineer in charge with all surfaces faced with upto 1.25 mm thick laminate

and PVC edge Banding as per the selection of the Engineer in charge. Storage to

Comprise of Adjustable shelves / Drawers with Auto close Telescopic channels

along with Water Dispenser & Dustbin Compartment provided with 150 mm Dia

Grommet with SS 304 Swivel Lid and Flap Shutter. Cost to include 19/20 MM Thk

PrePolished Granite on Counter formed as with Double Granite fascia up to 40

mm height on all visible sides as designed by Engineer in charge to make to be

flush in level with adjoining surfaces with machine cut & polished edges including

splash-back up to 100 mm height all laid/fixed with Adhesive of Suitable Grade.

Digitally signed by AMIT

COUNTER - LAMINATE STORAGE WITH ACRYLIC SOLID SURFACE TOP:

Providing and fixing storage of approved height and depth up to 650 mm with

Caracas and Shutters/ Shelves / Drawers to be made out of 25 mm thick BWP

Ply board as approved by Engineer in charge with all surfaces faced with upto 1.25

mm thick laminate and PVC edge Banding as per the selection of the Engineer in

charge. Storage to Comprise of Adjustable shelves / Drawers with Auto close

Telescopic channels along with Water Dispenser & Dustbin Compartment

provided with 150 mm Dia Grommet with SS 304 Swivel Lid and Flap Shutter. Cost

to include Counter Top formed with 25 mm Thk Marine Ply dressed with 12mm

Thk Acrylic Solid Surface and fascia up to 50 mm height on all visible sides as

designed by Engineer in charge to make to be flush in level with adjoining surfaces

and splash-back up to 100 mm height all laid/fixed with Adhesive as per the

proprietary Acrylic Solid Surface Manufacturer.

MICROWAVE & CUTLERY STORAGE WITH OPEN SHELVES & DUSTBIN &

WATER DISPENSAR BLOCK: P/F Laminated Storage Shutters & open storage

with overall width of up to 650 mm deep with open & Closed shelves up to 450 mm

High. The cabinet box of back//shelves /top/sides formed out of 19 mm Thk

HDMHR board with open shelves in fascia of 50 mm Thk double ply finished upto

1.25 mm Laminate with PVC edge banding as per detailed drawing and as directed

by Engineer in charge. Storage to Comprise of Adjustable shelves / Drawers with

Auto close Telescopic channels as per Engineer in charge approval.

Note : For Calculation of Rates the Overall front elevation area shall be measured.

OVERHEAD OPEN & CLOSED SHELVING STORAGE : Providing and fixing up to

450 mm deep open shelves cabinet with Closed Boxing /shutters as per Engineer

in charge Design with cabinet box/shelves /top/sides formed and back of out of

Double pressed 25 mm Thk Ply with all fascia members to be 50 mm Double ply

Thk finished with upto 1.25 mm Laminate with PVC edge banding as per detailed

drawing and as directed by Engineer in charge. Each Compartment considered

600 mm Wide with 400 mm High. Note : For Calculation of Rates the Overall front

elevation area shall be measured

Digitally signed by AMIT

DB & GAS FLOODING STORAGE WITH LOUVERED GRILL SHUTTERS:

Providing and fixing storage of depth up to 850 mm with Caracas formed out of 19

MM thick FR Ply and general Spec as 10.01 and Sliding Folding Shutters to be

made out of 25 mm thick FR Ply with Aluminium Grill / Perforations and all interior

and exterior surfaces to be faced with upto 1.25 mm thick laminate pasted with

10.01.7 MR high performance Wood Adhesive like Fevicol HeatX or equivalent and PVC edge 3 Sqm 12,325.00 36,975.00

Banding fixed on heavy duty Hinges with Sliding Folding Track Ozone Prague or

Equivalent and Back to be Made out of 25 MM Thk Bison Board finished with 1

mm Laminate as per the selection of the Engineer in charge.

SLOTTED ANGLE RACK: P/F slotted prime CRC Angle Racks in sturdy

demountable MS sections and framework with shelves finished in hot dip

galvanized/powder coated finishes as per approval for taking a load of 300kg/shelf

with 4 intermediate shelved provided with adjustment provision with a total height

upto 2100 mm and depth of upto 600 mm.

EXECUTIVE STORAGE WITH COAT HANGER: P&F Locker body up to 700 mm

(D) with balance space for coat hangers with shutter. Provision of Shelves and

hanging rod as per the drawing. Cost to be quoted as per all Bodies and Jamb

Finishing. Caracas , Shutters and Shelves to be fabricated with 19 MM Thk MDF

10.01.9 MR Board faced with 1.25 mm Laminate in colour and design as approved by the 3 Sqm 25,500.00 76,500.00

Engineer in charge. Cost to Include 4 Digit combination lock for every

MDF PORTAL FRAME : P/F Hollow Portal with fascia of up to 150 MM and Depth

up to 700 MM created by GI Framing reinforced with CPTW treated with fire

retarded and Anti termite treatment. All Visible Surfaces to be Finished with One

Layer of 19 mm Thickness of HDHMR MDF Board on exterior sides of the GI

10.01.10 MR Frame dressed with Laminate 1.00 MM Thk / PU Paint as approved by Engineer in 20 Sqm 8,500.00 170,000.00

charge. Cost to include routing of wiring with cutting and support of Light fixtures.

BOARD ROOM VENEER STORAGE PORTAL: P&F Board room Unit in Veneer as

per the Design of Engineer in charge , to be formed from 19 the Commercial board

construction with 4 mm Veneer finish on all exposed surfaces having Acrylic Top.

The construction will have combination of 400 mm deep with openable shutters

with Shelves inside and drawers on self closing drawer glides with soft touch

10.01.11 MR closing and side hinged shutters on soft closing hinges . Depth up to 400 mm , 17 Sqm 29,750.00 505,750.00

height up to 2400 mm and length as per Dwg. Cost to include concealed fixing

arrangement for Mounting the credenza on Wall and Partitions with concealed

fixing arrangements.

Digitally signed by AMIT

LAMINATED FLOATING SHELVES: P/F floating shelves up to 200 mm deep & 50

mm thick with 600 mm Splashback made in 19 mm thick BWP commercial board &

finished in 1.25 mm Thk laminate as per approved with all concealed framework

required to fix the same in wall. Cost to include routing of wiring with cutting and

support of Light fixtures.

CREDENZA: P&F Meeting Room Credenza as per the Design of Engineer in

charge , to be formed from 19 the Commercial board construction with 1mm

Laminate finish on all exposed surfaces having Acrylic Top. The construction will

have combination of 100 deep drawers on self closing drawer glides with soft touch

10.01.13 MR closing and side hinged shutters on soft closing hinges . Depth up to 400 mm , 2.5 RM 21,250.00 53,125.00

height up to 900 mm and length as per Dwg. Cost to include concealed fixing

arrangement for Mounting the credenza on Wall and Partitions with concealed

fixing arrangements.

HIGH COUNTER BAR STYLE: P&F As per the Design and Detail provided by the

Engineer in charge. Formed on Existing Walls Or Window along with Provision of

landscape features and Foot Rest. Overall Depth of 500 mm and Height of 1050

10.01.14 MR mm Note: Contractor to prepare Rate analysis and shop Dwg as per the Design for 7 RM 17,000.00 119,000.00

final rate approval and design sign off.

CORNER GUARD FOR WALLS: Providing and fixing of Anodised Polished

Aluminium Corner Guards of 15mm x 15mm in all exposed Protruding corners as

10.02 MR per as per the colour and Design as approved by Engineer in charge. Cost to 30 RM 1,020.00 30,600.00

include fixing on the existing surface with neat structural tape without gaps and

HAT SECTION PROFILE FOR WRITING GLASS: Providing and fixing of Anodised

Polished Aluminium T profile of 10 mm x 10 mm in all exposed edges of

Lacquered glass , Wall grooves as per the as per the colour and Design as

10.03 MR approved by Engineer in charge. Cost to include fixing on the existing surface with 30 RM 850.00 25,500.00

neat structural tape without gaps and undulations.

ENTRANCE MAT: P/F Dust mats as specified for all Main Entry Egress Points as

per the Colour and Size approved by the Engineer in charge. Euronics - Medium

10.04 MR Duty X-lertaor matting (8mm Thk) (MAT-02 or Equivalent as approved by Engineer 3 Sqm 3,876.00 11,628.00

Company name Logo cut in 3mm acrylic sheet, finished with brass/ golden or any

other coolour coolour SS plate, 3d letter CNC be cut to sizes and directly installed

on available base with premiume quality adhesive tape, including necessary

hardware, substructure, extra, as specified and directed by Engineer in charge. 2800 Sqinch 85.00 238,000.00

The letters shall be back lit/ front lit up with LED lights. Letter sizes to be measured

Digitally signed by AMIT

Company name Logo cut in 3mm acrylic sheet, finished with brass/ golden coolour

/ or any other colour SS plate, 3d letter CNC be cut to sizes and directly installed

on 3mm acrylic sheet with premiume quality adhesive tape, to be hanged/fixed on

wall/surface as per the requirement including necessary hardware, substructure, 2800 Sqinch 92.00 257,600.00

extra, as specified and directed by Engineer in charge. Base plate sizes to be

measured for payment

Providing making and fixing in position custom made 1/1.5mm SS siganges of

10.07 MR sizes as per Engineer in chargeural drawings and instruction with approved SS

fixtures, approved base including necessary hardware, substructure extra complete

as per detail drawing, as specified and directed by Engineer in charge.

Canvas paintings (Oil/ Acrylic medium)

Concept Creation

Creating design and creation of Art work concept on given subject. With initial visit

to site, preparation of various designs with different material, providing the

samples, layout for approval, improvisation in short listed creative’s and making of

final layout for final production by enlargement of drawing as per ratio of actual

size, to prepare detailed working shop drawings (full scale) based on the Concept

11.01 MR drawings/ Views/ site conditions, display of actual size dummy/ mock up fabricated 20 Sqm 9,658.00 193,160.00

in sun board with digital print for client approval

ART WORK EXECUTION

Towards the cost of doing canvas painting by qualified artist including frame and

installation at site

12 Horticulture and Landscaping

12.01 MR Supply and Planting Draco plant having 6ft height complete. 5 Each 6,500.00 32,500.00

Supply and Planting Monstera plant having 3-4 ft height complete.

Supply and Planting Lolina plant having 2-3 ft height with Coco-peat, mud and

manure complete.

Providing and displaying of Seaforthia Palm having ht. 90 cm to 1.20 m

with 6-8 suckers, well developed, fresh and healthy lush green leaves from

bottom to top in 20 cm size of Earthen pot/Plastic pot & as per direction of

the officer-in-charge.

Digitally signed by AMIT

Providing and displaying of Raphis palm specimen plant, having ht. 1.50 m to 1.65

12.05 3.78 to 50 lush green suckers, well developed, fresh & healthy foliage leaves in 40 cm 12 Each 530.95 6,150.00

Earthen Pot / Chali / Tray & as per direction of the officer-in-charge.

Supply of full soil fill conical shaped planters of specified volume and dimensions in

stone finish or equivalent. planters to be indigenously made by rotational moulding,

with homogeneous recyclable, industrial grade polymer-resin mix, and textured

surface. planters should have an integrated water outlet hole & plug, single layered

peel-proof construction, light weight, rust proof, uv stabilized, anti-frost feature

12.06 MR without any joints, and easy to clean. planter supplier must give 1 year warranty

against any fading or cracking for both indoor and outdoor use. green plant and

laying is extra. potting instructions as per company catalogue.

Supply of double layered translucent backlit cylinderical shaped - hand carfted

pattern planters of volume 18 ltr; approx. dimension 24(h)x18(d) in granite/ stone/

solid finish or equivalent. planters to be indigenously made by rotational moulding,

with homogeneous 100% recyclable, industrial grade polymer-resin mix, with

textured surface and stone match finishes. planters to have concealed shock

resistant back lighting system with secured supply wire and an integrated water

12.07 MR outlet hole & plug, peel proof construction, asbestos free, light in weight, without 10 Each 9,500.00 95,000.00

any joints, rust proof, uv stabilized, anti-frost feature and easy to clean. planter

supplier must give 1 year warranty against any led, fading or cracking for indoor

and outdoor use.

Supply of double layered translucent backlit cylinderical shaped - hand carfted

pattern planters of volume 40 ltr; approx. dimension 40(h)x18.5(d) in granite/

stone/ solid finish or equivalent. planters to be indigenously made by rotational

moulding, with homogeneous 100% recyclable, industrial grade polymer-resin mix,

with textured surface and stone match finishes. planters to have concealed shock

12.08 MR resistant back lighting system with secured supply wire and an integrated water 10 Each 13,500.00 135,000.00

outlet hole & plug, peel proof construction, asbestos free, light in weight, without

any joints, rust proof, uv stabilized, anti-frost feature and easy to clean. planter

supplier must give 1 year warranty against any led, fading or cracking for indoor

and outdoor use.

GRAND TOTAL 19,333,345.90

GRAND TOTAL 19,333,345.90

Digitally signed by AMIT

S NO. DSR NO. TOTAL AMOUNT DSR TOTAL AMOUNT NON-

S NO. DSR NO. TOTAL AMOUNT DSR TOTAL AMOUNT NON-

DESCRIPTION OF ITEM UNIT BOQ QTY. RATE

2021 (INR) DSR (INR)

1 Providing and Fixing soil, waste and vent pipes.

a 17.35.1.2 100mm dia Centrifugally cast (spun) iron socketed pipe as per IS:

b 17.35.2.2 75mm dia Centrifugally cast (spun) iron socketed pipe as per IS:

2 17.70.2 Providing and fixing PTMT Bottle Trap for Wash basin and sink.

Bottle trap 38 mm single piece moulded with height of 270 mm,

effective length of tail pipe 260 mm from the centre of the waste Each 2.00 325.10 650.20

coupling, 77 mm breadth with 25 mm minimum water seal, weighing

not less than 263 gms

3 Providing and Fixing trap of self cleansing design with screwed down

or hinged grating with or without vent arm complete, including cost of

cutting and making good the floor and walls

100mm inlet and 100mm outlet Sand cast iron S&S as per IS - 3989 Each 3.00 1,604.10 4,812.30

4 Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent

pipes and fittings with paint of any colour such as chocolate grey or

buff etc. over a coat of primer (of approved quality) for new work.

5 Providing and fixing MS holder-bat clamps of approved design to Sand

Cast iron/cast iron (spun) pipe embedded in and including cement

concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement: 2 coarse sand :

4 graded stone aggregate 20mm nominal size) including cost of cutting

holes and making good the walls etc.

6 Providing and fixing bend of required degree with access door

insertion rubber washer 3mm thick bolts and nuts complete

Digitally signed by AMIT

a 17.38.1.2 100mm Sand Cast iron S&S as per IS-3989 Each 6.00 597.70 3,586.20

b 17.38.2.2 75mm Sand Cast iron S&S as per IS-3989 Each 0.00 453.40 0.00

7 Providing and fixing plain bend of required degree

a 17.39.1.2 100mm Sand Cast iron S&S as per IS-3989 Each 6.00 439.75 2,638.50

b 17.39.2.2 75mm Sand Cast iron S&S as per IS-3989 Each 1.00 298.20 298.20

8 Providing and fixing single equal plain junction of required degree with

access door, insertion rubber washer 3 mm thick, bolts and nuts

a 17.44.1.2 100x100x100 mm Sand cast iron S&S as per IS - 3989 Each 6.00 707.30 4,243.80

9 Providing and fixing collars

a 17.57.1.2 100mm Sand Cast iron S&S as per IS-3989 Each 3.00 439.75 1,319.25

10 Providing lead caulked joints to sand cast iron/centrifugally cast

(spun) iron pipes & fittings of dia

11 17.59 Providing and fixing MS stays and clamps for sand cast iron/

centrifugally cast (spun) iron pipes of diameter.

Providing and fixing C.P. brass long body bib cock of approved quality

conforming to IS standards and weighing not less than 690 gms.

a 18.51.1 15 mm nominal bore Each 1.00 708.40 708.40

13 Providing and fixing C.P. brass stop cock (concealed) of standard

design and of approved make conforming to IS : 8931.

a 18.52.1 15 mm nominal bore Each 1.00 594.75 594.75

14 Providing and fixing C.P. brass angle valve for basin mixer and gyser

points of approved quality conforming to IS : 8931

a 18.53.1 15 mm nominal bore Each 15 500.35 7,448.00

Digitally signed by AMIT

Cutting chases in brick masonry walls for following diameter sand cast

iron/centrifugally cast (spun) iron pipes and making good the same

with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone

aggregate 12.5 m nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

16 18.76 Cutting holes upto 30 X 30 cm in walls including making good the

18.76.1 With common burnt clay F.P.S. (non modular) bricks Each 5.00 362.40 1,812.00

17 18.78 Making chases upto 7.5 X 7.5 cm in walls including making good after

housing G.I. pipe etc.

Providing and fixing in position, the following G.I. medium class Waste

Pipes (IS:1239) with all necessary fittings like union, elbow, Tee,

reducer etc specials complete, cutting and chasing walls, floors, etc.

and making good the same including painting the pipes with two coats

of anti-corrosive paint.

19 MR Providing and fixing floor trap Extension Piece made out of 100 mm

dia M.S pipe ( medium grade) of required length (upto 450 mm) with 32

mm to 50 mm dia threaded maleable iron sockets ( maximum 4 nos.)

welded as side inlets, neatly finished, inside and outside epoxy Each 3.00 1,200.00 3600

painted, including the cost of jointing with floor trap with dripseal joint.

20 MR Providing, installing, testing and commissioning of package sump unit

with built-in submersible drainage pump, nonreturn valves, cutter,

electrical panel/starter cabeling,common header, all as per standard

design and including making connections with grease separator/sink

waste pipes drain pipe upto sewer shaft connections to be provided

and make it operational complete in all respect

Digitally signed by AMIT

for Pantry,toilet,pantry Each 6.00 79,500.00 477000

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m

This includes jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the same

including testing of joints complete as per direction of Engineer in

Concealed work including cutting chases and making good the

a 18.8.1 15mm nominal outer dia pipes M 40.00 441.15 17,646.00

b 18.8.2 20mm nominal outer dia pipes M 5.00 513.75 2,568.75

c 18.8.3 25mm nominal outer dia pipes M 5.00 626.05 3,130.25

c 18.8.4 32mm nominal outer dia pipes M 5.00 712.75 3,563.75

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

having thermal stability for hot & cold water supply, including all CPVC

plain & brass threaded fittings, including fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of

Engineer in Charge.

18.7.1 15 mm nominal outer dia Pipes M 50.00 255.90 12,795.00

18.7.2 20 mm nominal outer dia Pipes M 90.00 325.10 29,259.00

18.7.3 25 mm nominal outer dia Pipes M 35.00 408.55 14,299.25

18.7.4 32 mm nominal outer dia Pipes M 15.00 500.95 7,514.25

18.7.5 40 mm nominal outer dia Pipes M 5.00 674.35 3,371.75

18.7.6 50 mm nominal outer dia Pipes M 5.00 927.00 4,635.00

Digitally signed by AMIT

23 18.9 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,

thermal stability for hot & cold water supply including all CPVC plain &

threaded fittings This includes jointing of pipes & fittings with one step

solvent cement, trenching, refilling & testing of joints complete as per

directionof Engineer in Charge.

a 18.9.5 40mm nominal outer dia pipes M 20.00 559.20 11,184.00

b 18.9.6 50mm nominal outer dia pipes M 25.00 811.85 20,296.25

Providing and fixing ball valve (brass) of approved quality, High or low

pressure, with plastic floats complete :

24 18.19 Providing and fixing gun metal non- return valve of approved quality

18.19.2.2 32 mm dia. nominal bore Each 4.00 777.90 3,111.60

18.19.4.2 50 mm dia. nominal bore Each 2.00 1,320.80 2,641.60

25 18.21 Providing and fixing unplasticised PVC connection pipe with brass

a 18.21.1.1 30cm lengh &15 mm nominal bore Each 14.00 74.80 1,047.20

Digitally signed by AMIT

Providing and fixing white vitreous china clay wall mounted

European type Water Closet (EWC) with dual flush concealed

cistern of approved make, of approved shade including matching

shade of plastic seat and lid cover, fittings, connectors, necessary

hanging arrangement, rubber buffers etc. including cutting and making Each 2.00 16,000.00 32000

good the wall and floors wherever required, making connections to soil

/ vent pipe etc., complete in all respects inclusive of cost of all required

fittings, fixtures, materials, labour, tools, tackles etc. as per

specifications and direction of Engineer-in-Charge.

Providing and fixing glazed vitreous China rectangular wash basin of

560x410 mm size of approved make similar to Jaquar Kubix KUS-

WHT-35935 or similar with MS or CI brackets painted white, C.P.

brass chain with rubber plug, 32 mm CP brass waste coupling of

standard pattern, 32 mm CP brass bottle trap and union, 32 mm dia

C.P. pipes to wall flange etc. including cutting and making good the

walls & floors where required complete in all respects inclusive of cost

of all required fittings, fixtures, materials, labour, tools, tackles etc. as

per specifications and direction of Engineer in Charge

a) White colour Each 2.00 18,000.00 36000

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as

with C.I. brackets and stainless steel plug 40 mm, including painting of

and brackets, cutting and making good the walls wherever required :

17.10.1 a) Kitchen sink with drain board 510mmx1040mm, 250mm deep Each 2.00 6,008.45 12,016.90

Digitally signed by AMIT

29 MR Providing and fixing ivory coloured vitreous china flat back urinal

basin set of Urinals similar approved make with auto sensor flushing

system with built in sensor including spreader, all fittings, brackets for

wall fixing, connection pipe, waste pipe etc. for individual urinal

including cutting and making good the walls and floors wherever

required etc., complete in all respects inclusive of cost of all required

fittings, fixtures, materials, labour, tools, tackles etc. as per

specifications and direction of Site Engineer.

Providing & fixing 6mm thick, copper back finish, looking mirror of

required size, made of float sheet glass of best quality & approved

make, over 12 mm thick marine board fixed to rawl plug with round

head screws and washers including teak wood beading with melamine Sqm 5.00 6,500.00 32,500.00

polish all around, complete in all respects inclusive of cost of all

materials, labour, tools, tackles etc. as per specifications and direction

Providing and fixing CP Central hole single lever wash basin mixer

with tuchfree senser, mixture,diverter & popup waste system with 2

nos. 10 mm dia. 450mm long copper pipes and brass nuts, size 15mm Each 3.00 10,800.00 32400

including cutting and making good the walls where required complete

in all respects as per direction of Engineer-in-Charge.

Providing and fixing sensor based CP brass tap/angle cock with CP

brass flange including cutting and making good the walls where

required complete in all respects inclusive of cost of all materials, Each 8.00 1,800.00 14400

labour, tools, tackles etc. as per specifications and direction of Site

Engineer. Two way Bib Cock with wall flange.

Providing & fixing health faucet/ hand shower ABS body with 1 meter

long PVC tube and wall hook with flexible tube 8mm dia 1.5 m long.

35 22.14.1 Grading roof for water proofing treatment with cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal Cum 15.00 7,510.75 112,661.25

Digitally signed by AMIT

Supply and fixing of all accessories for wash room including hand

dryer, shoe polisher, touch-free sanitizer, touch free soap dispenser, Nos. 2.00 125,000.00 250000

multi recess panel,airpurifier, console,

Automatic Shoe Shining Machine Material: Stainless Steel/Satin

Finish, Operation: Fully Automatic, Voltage: 220V / 50Hz, Rated

Power: 40 W, RPM: 1400, Time Protection: 15 sec, Polish capacity:

200 ML, Dimension: 370 x 370 x 445 mm

Recess Panel 3 in 1 Panel (Hand Dryer + Auto Tissue Roll Dispenser

+ Waste Receptacle), Multifunction Recessed Washroom Panel

(Consisting of Hand Dryer + Auto Tissue Roll Dispenser + Waste

Receptacle) ,Hand Dryer :1350W,Wall Opening Required : 320mm

Twin Toilet Paper Holder - Steel Twin Toilet Paper Holder -

Steel,Application : WC Cubicle Area

Automatic Hand Sanitiser Dispenser floor standing- High Traffic

Providing & Fixing of Automatic Hand Sanitizer Capacity 1100 ml

Battery operated Spray Amount: 2 Ml Sensing Range: 8 Cm

AUTO SOAP DISPENSER- 1100ML

Digital Perfume Dispenser Supplying of Polycarbonate ABS Casing

Perfume dispener Operation- Battery Spray Interval : 1 – 99 Mins,

Weekly Off Option Refill Can: 110 ML

Automatic Hand Sanitiser Dispenser Wall mount - High Traffic

Providing & Fixing of Automatic Hand Sanitizer Model no. EST 02,

Capacity 1100 ml Battery operated Spray Amount: 2 Ml Sensing

Digitally signed by AMIT

37 MR Supply and fixing of hand free water fountained with casecaded RO

system complete witt all accessoried

Standard Features

20 ltr/hour 50 ltr storage including SS steel body water cooler of

suitable rating for 50 ltr cooling

Hands-free QUASAR with mercury-free UVC-LED treatment at the

Waterways are Lead-Free in materials & construction

Flexible one-piece water saver bubbler guard infused with silver based

antimicrobial additive

Stainless steel top and heavy duty galvanized steel frame

High efficiency cooling system and refrigerant R-134a

Four antimicrobial copper push pads per fountain

External stream height adjustment on the drinking fountain

Built in filter monitor and bottle counter

VersaFilter II is certified to NSF/ANSI 42 and 53

Suitable storage tank of standard manufacturer

Proving & fixing of water dispencer 20 ltr bottle mount type with hot

and cold feature complete as per requirement of EIC

38 MR Supply and Installation of modular WC cubicles of width and depth

as per specifications/ drawings. Cubicle height to be upto 2100 mm. Nos. 3.00 40,000.00 120,000.00

ITEM DESCRIPTION

Made from solid grade compact high pressure laminate as per IS:2046

manufactured under high specific pressure > 5 MPa and temperature

>120oC with bunch of kraft papers impregnated with thermosetting

phenolic resin and decorative papers made of Alpha cellulose fiber

impregnated with thermosetting melamine resin which provide superior

scratch, abrasion, heat, chemical, impact, graffiti & moisture resistance

along with anti-bacterial properties. Panels have a black core that

when machined, presents a distinctive black edge. Panel thickness 12

mm. Design no. as specified by Arch. / Engr. in suede finish. Size of

panels to be as per drawing and verified as per site.

Digitally signed by AMIT

HARDWARE & ACCESSORIES

• Rectangular head frame structure made from Stainless steel grade

304. Surface finish to be brush type. A thin plastic film pasted for

surface protection.

Size to be 55mmx42mmx1.6 mmT.

Corner joinery section made from Stainless steel grade 304. Surface

finish to be brush type. A thin plastic film pasted for surface protection.

Size to be 35mmx15mmx0.8 mmT.

Wall joinery section with hamming profile made from Stainless steel

grade 304. Surface finish to be brush type. A thin plastic film pasted for

surface protection. Size to be 21mmx16mmx0.8 mmT.

• Adjustable Palm Design Pedestal Footing of base diameter 64 mm

made from Stainless steel grade 316 giving a clearance height of 150

mm. Surface finish to be matt type.

• Spring loaded Butt Hinges made from Stainless steel grade 304.

Surface finish to be matt type. Covers to be lacquer coated.

• Conical shape Coat hook with rubber stopper made from Stainless

steel grade 304. Surface finish to be matt type.

• Round Door knob diameter 30 mm with grooves for better hand grip

made from Stainless steel grade 304. Surface finish to be matt type.

• Rotating Thumb-turn locking system with privacy indicator made from

Stainless steel grade 304. Surface finish to be matt type.

• Anti-noise rubber padding of thickness 2 mm and width 10 mm

• Stainless steel grade 304 screws.

Anti-rotation Nylon

system madepolyamide grade-6 expandable

out of Aluminium wall plugs.

Extrusions around 2mm thick

and anodised around 15 micron.Size 25x45mm at top and bottom .The

Partition to have vertical portals to house the service cable.The portals

to be on the door side as well as on the corner and junction with solid

The wall starter shall be 105/more x105mm/more.The partition

sections to be suitale to be clubbed with any type of door frame and

door shutter(Sliding or hinged door). The sections to be stable enough

to accept glass thickness 10mm toughened glass also.The partition

sections to be available in anodized finish in any RAL color as

approved by the architects.The Partition should be demountable and

easy to install and maintain.The glass joints to be finished with

Cubicles: Std Sizes (W x D x H)- 900 mm x 1550 mm x 1980 mm (

Height is including 150 mm gap from bottom) Door Size- 600 mm

39 MR SITC of 15 ltr capacity enery efficient storage type water heater

including flexible connection pipe angle cock complete in all respect Nos. 3.00 15,000.00 45000

Digitally signed by AMIT

TOTAL PLUMBING WORK AMOUNT 328,751.70 1262000

Grand Total 1,590,751.70

Grand Total 1,590,751.70

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

&M- QUANTIT TOTAL

SNO. DESCRIPTION UNIT RATE TOTAL AMOUNT

SNO. DESCRIPTION UNIT RATE TOTAL AMOUNT

2022) / Y AMOUNT

DSR ( INR ) N0N -DSR ( INR )

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable in surface /

A.18 1.10 recessed medium class PVC conduit, with modular switch, modular plate,

suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated

copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without

independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper

A.19 1.55 conductor single core cable in surface / recessed PVC conduit, and earthing

the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core

cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper

conductor single core cable in surface/ recessed medium class PVC conduit

alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core

cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular

A.22 1.24 plate & switch box including connections but excluding modular plate etc. as

1.24.4 3 pin 5/6 amp socket outlet Each 500 122.00 61000

1.24.5 6 pin 15/16 amp socket outlet Each 60 197.00 11820

Supplying and fixing following size/module, GI box along with Modular base &

cover plate on existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Digitally signed by AMIT

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes

1.14 of FR PVC insulated copper conductor, single core cable in surface/ recessed

medium class PVC conduit as required

B.1 1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 50 334.00 16700.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 50 439.00 21950.00

1.14.6 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 100.00 772.00 77200.00

Supplying and fixing of following sizes medium class PVC conduit aong with

accessories in surface/ recess including cutting the wall and making good the

B.2 1.21 same incase of recessed conduit as required

Supply of following XPLE armourned 1.1 KV grade conforming to

MR I.S.7098/1554Aluminium Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium

conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 /

C.2 IS:1554 part-1 respectively & ISI marked.

(a) 3.5 C x 120 Sqmm XLPE cable RM 10 1078.00 10780.00

(b) 3.5 C x 95 Sqmm XLPE cable RM 200 864.00 172800.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 10 680.00 6800.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 10 510.00 5100.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 200 378.00 75600.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE

insulated Copper conductor armoured cable of 1.1 KV grade conforming to

IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(a) 4 C x 16 Sqmm XLPE copper cable 1446.00 144602.31

(b) 4 C x 25 Sqmm XLPE copper cable 2253.00 225300.00

(c ) 3.5 C x 35 Sqmm XLPE copper cable 2686.00 134300.00

Supplying and making end termination with brass compression gland and

aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE

aluminium conductor cable of 1.1 KV grade as required.

Digitally signed by AMIT

Laying and fixing of one number PVC insulated and PVC

7.8 sheathed / XLPE power cable of 1.1 KV grade of following size

on cable tray as required.

7.8.1 Upto 35 sq. mm (clamped with 1mm thick saddle) Metre 700.00 45.00 31,500.00

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm

D Distribution Board

Supplying and fixing single pole blanking plate in the existing MCB DB

complete etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve,

miniature circuit breaker suitable for inductive load of following poles in the

D.2 2.10 existing MCB DB complete with connections, testing and commissioning etc.

2.10.1 Single pole Each 300 256.00 76800

2.10.5 triple pole & neutral Each 25 1228.00 30700

Supplying and fixing following rating, four pole, 415 volts, isolator in the

existing MCB DB complete with connections, testing and commissioning etc.

Supplying and fixing following way, horizontal type three pole and neutral,

sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with

tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections,

powder painted including earthing etc. as required. (But without

Supplying and fixing of following ways surface/ recess mounting, vertical type,

volts, TPN MCB distribution board of sheet steel, dust protected, duly powder

painted, inclusive of 200 amps tinned copper bus bar, common neutral link,

D.3 2.5 bar, din bar for mounting MCB’s (but without MCB’s and incomer ) as required

(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are

Digitally signed by AMIT

Supplying and fixing following way, single pole and neutral, sheet steel, MCB

distribution board, 240 V, on surface/ recess, complete with tinned copper bus

bar, neutral bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.3.2 8 way , Double door Each 2 2573 5146

2.3.3 12 way , Double door Each 2 2315 4630

Supplying and fixing following rating, double pole, (single phase and neutral),

240 volts, residual current circuit breaker (RCCB), having a sensitivity current

upto 300 milliamperes in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating ,double pole, 240 Volts, isolator in the

2.12 existing MCB DB complete with connections, testing and commissioning etc.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supplying and fixing following modular switch / socket on the existing modular

E.16 1.24 plate & switch box including connections but excluding modular plate etc. as

1.24.7 TV socket outlet Set 10 148.00 1480

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI)

Raceways along with required suitable number of GI couplers for joining

raceways and fixing GI brackets and all accessories complete in all respect as

per the directions of engineer in charge

(a) 250mmx40mm(GI) 3 compartment Mtr 160 1051.39 168222.75

(b ) 150mmx40mm(GI) 2 compartment Mtr 125 1988.00 248500

Supply, Installation, Testing and Commisioning of Junction boxes for direct

access to cables at the intersection of raceways supplied completely with

base and cover plates, height adjustable junction box 65- 90 mm including all

accessories complete in all respect as per the directions of engineer with SS

top cover of respective size of 4mm thick SS 304 grade

Digitally signed by AMIT

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper

conductor PE insulated, shielded with fine tinned copper braid and protected

E.22 1.19 with PVC sheath in the exisitng surface/recessed steel/ PVC conduit as Metre 150 47.00 7050

Supplying and installing following size of perforated Hot Dipped Galvanised

Iron cable tray (Galvanisation thickness not less than 50 microns) with

perforation not more than 17.5%, in convenient sections, joined with

E.24 4.6 connectors, suspended from

the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.

4.6.6 450 mm width x 50 mm depth x 2 mm thickness Metre 18 1325.00 24259.955

4.6.4 300 mm width x 50 mm depth x 1.6 mm thickness Metre 82 963.00 78749.325

4.6.2 150 mm width x 50 mm depth x 1.6 mm thickness Metre 31 716.00 22540.038

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including

accessories, and providing masonry enclosure with cover plate having locking

1 5.6 arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and SET 3 13838.00 41514

salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for

connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for

connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop

earthing as required.

14 MR Floor Panels

Designing, fabricating, transporting, unloading, storing, fixing in position,

testing and commissioning the following sheet steel cubicle type panels

fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, indoor type

TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA

sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for

cable alley and with segregated bus-bar chamber with tinned aluminium bus Each 1 200000.00 200000

bar and including supplying and fixing following switchgears, meters and

accessories, inter-connections, bonding to earth, powder coated painting and

marking as specified. Switch boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic

diagram and as detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Digitally signed by AMIT

1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker

of fault breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat

shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required

intervals complete for cross section, size supports & their spacing etc. for

withstanding fault level of 25 MVA for 1 Sec.

(a) 100 Amps, TPN, MCB -3 Nos.

(a) 63 Amps, FP, MCB -12 Nos.

(a) 32 Amps, FP, MCB -3 Nos.

(b) 40 Amps, DP, MCB - 4 nos

Panel complete as above

15 MR UPS Panel

Designing, fabricating, transporting, unloading, storing, fixing in position,

testing and commissioning the following sheet steel cubicle type panels

fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, indoor type

TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA

sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for

cable alley and with segregated bus-bar chamber with tinned aluminium bus Each 1 185000.00 185000

bar and including supplying and fixing following switchgears, meters and

accessories, inter-connections, bonding to earth, powder coated painting and

marking as specified. Switch boards complete as per schematic diagram:

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic

diagram and as detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Three (2) nos, 125 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit

Breaker of fault breaking capacity 25 KA (ICS=ICU up to 433 V) complete in

TPN aluminum bus bars of minimum of 200 Amps capacity with heat

shrinkable colored sleeves and I/C DMC/SMC bus bars supports at required

intervals complete for cross section, size supports & their spacing etc. for

withstanding fault level of 25 MVA for 1 Sec.

(b) 63 Amps, FP, MCB - 6 nos

(c ) 63 Amps, DP MCB - 6 nos

Panel complete as above

Digitally signed by AMIT

Supply, Installation, Testing and Commissiong of 20 KVA True Online Double

Conversion UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1

Configuration IGBT Based Rectifier and IGBT Based Inverter Batteries:12 V,

SMF Amararaja/Exide with minimum VAH capacity of 15600 suitable for 30

minutes backup with each ups Along with Accessories Rack, stand, Interlinks,

MR SFU, Parallel Kit, DC Cable Upto 5 Meters, neccesary earthing setup and Each 4 450000.00 1800000.00

complete in all respect as per the directions of the engineer in charge. UPS

should have availability of Input /Output isolator, Inbuilt manual bypass along

with phase sequence corrector. UPS Efficiency shall not be less than 94%

from 25% to 100% Load

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild Nos.

17 2.21 steel, atleast 2 mm thick, and vitreos enamelled white on both sides and with 2 269.00 538

iscription in single red colour on front side as required

Total of Electrical items 4299744.3 3798825.1

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

DSR (INR) NON-DSR (INR)

VAV BOX (WITH INTEGRAL SOUND ATTENUATOR)

Supply and Installation of pressure independent rectangular VAV unit with integral sound

attenuator made of 22G GI sheet casing length suitable length consisting of 25mm thick

48kg/m3 density fiber glass wool covered with tissue paper ,elliptical volume control damper ,

calibrated differential pressure sensor (DPT sensors) at inlet complete with digital

3.0 Thermostat,temprature control feature including motorized damper and actuator .(All VAV

shall be factory calibrated).

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

M.R. 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 20 HP or as directed by the engineer in charge Nos. 2.0 74960.00 149920.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts.

Quoted price shall be inclusive of necessary conduting, copper control cabling from the

sensors to the respective VFDs as per "Approved Shop Drawings".

6.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following

capacity with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections,

M.R. blades, the impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V

a ± 10 %, complete as required. This cost shall include the cost for suitable panel, DOL starter,

breakers etc compete in all respect as per the directions of engineer in charge.

6000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 2.0 73250.00 146500.00

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch

and return air path as and where required of required sizes i/c control wiring,the damper shall

be motorized and spring return so as to close the damper in the event of power failure

7.0 16.20 automatically and open the same in case of power being restored. The spring return action

shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the

event of fire signal complete as required and as per specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

GI Gravity Louver

8.0 M.R. Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene

rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. SQM 10.0 6600.00 66000.00

9.0 VOLUME CONTROL DAMPER

Supply, Installation and Testing of GI box type volume control dampers as per the

M.R. specifications and shop drawings.

- For Rectangular Ducts

Insulated Flexible Duct

Supply, Installation, Testing and Balancing of flexible ducting comprising of inner as well as

outer skin constructed out of aluminium & fibre glass insulation 25mm thick of minimum 24

kg/cu.m density insulation sandwitched in between. Duct should confirm to fire rating standards

10.0 Flexible Ducts of following sizes as per approved shop drawings, specifications :

Universal (Jubilee) clamp should be provided to fix the flexible duct in the spigots/Butterfly

MR Dampers and covered with aluminium tape. Circular clip with chain/GI threaded rod to be

provided to support the flexible duct.

Supply, Installation and Testing of single piece GI round spigot made out of spinning process

with 50mm height and having grooves on both sides and circular flanges. Spigots shall be

installed on main ducts to facilitate connection of flexible ducts.

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

Supply, Installation and Testing of Butterfly damper of GI sheet construction with two flap with

round flange on one side and 10mm grove on other side for fixing of flexible duct with the help

of band, 20 Gauge Frame 250mm dia & above, 22 Gauge Frame upto 200mm dia & 22

Gauge Blade in all sizes as per the specifications and shop drawings.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal

rectangular/ round ducting complete with neoprene rubber gaskets, elbows, splitter dampers,

13.0 vanes, hangers, supports etc. as per approved drawings and specifications of following sheet

thickness complete as required.

Diffusers & Grills

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium

volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but

without volume control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium

without volume control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of antivibration flexible joints at the outlet of air handling

18.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported each 10.0 1440.00 14400.00

fire retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the SQM 2.0 5500.00 11000.00

suction of fresh air/discharge of Exhaust air as per the specifications and shop drawings.

21.0 MR Sample of bird screen to be got approved from consultants and Clients prior to procurement.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed

cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for

22.0 16.23 Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile

rubber tape insulation complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin

bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm

thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm

23.0 thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts,

16.21 bolts, stick pins, CPRX compound etc. complete as required and as per specifications SQM 140.0 708.00 99120.00

Supply, Installation, Testing and Commissioning of Air Purification systems in the specified

areas where AHU/VRF/FCU/Cassette/Hi-Wall/Ductable units etc are installed, so as to

improve indoor air quality by using, Self-cleaning Needlepoint Ionizer made of Carbon brush

emitters. The Needlepoint brushes shall be designed to properly release equal amount of

positive and negative ions in the supply air,>400Million ions/cc without any obstruction. The

units to be suitable for capacities up to 6000 CFM, with universal voltage input 24V to 240V

AC/DC, ionizer indicator LED, set of dry contacts which will indicate ionizer functionality. The

MR unit shall have capability to be switched on 24/7 and shall have weathertight conduit of

minimum 6ft length.System should kill microorganisms and pathogens and backed with

Independent lab test reports on the real virus and not surrogate. The system also should

reduce odors, TVOC’s and reduce particle/particulate matter/PM2.5/PM10. The products

should be UL 2998 listed with zero Ozone Emission.

28.0 AHU (upto more than 12000 to 24000Cfm ) Nos 1.0 81420.00 81420.00

MR AUTO PURGE VALVES

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

Supplying , Installaing , Testing and Commissioning of 25mm dia automatic purge valves.

MR THERMOMETERS

Supply, Installation, Testing and Commissioning of Digital thermometers as per the

specifications.

Supplying, fixing, testing and commissioning of following valves,

strainers, gauges in the chilled water plumbing duly insulated to

the same specifications as the connected piping and adequately

supported as per specifications.

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber

16.7.1 Seal & O- Ring PN 16 pressure rating for chilled water/hot eater

circulation as specified

2.5 GATE VALVES

Supply, Installation , Testing and Commissioning of following Gate Valves in accordance

with the approved shop drawings and specifications. Quoted price shall be inclusive of

insulation as per the specifications.

Providing and fixing in position the industrial type pressure gauges with gun metal / brass

valves complete as required

1.1 CHILLED WATER BASED CASSETTE UNITS

Supply, Installation , Testing and Commissioning of chilled water cassette units each

comprising of following as per the specifications :

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

Fan section complete with forward curved centrifugal blowers housed in pre painted GI casing ,

FHP motor, 3 rows deep chilled water coil, insulated condensate drain pan, coil piping

connections using necessary copper piping, condensate drain connections, copper wiring,

washable aluminium mesh multilayer filters etc., high efficiency drain pump, in built

thermostat, motorized valve for flow control including control wiring, y stainer, balancing valve,

connection fitting, decorative panel, drain pump failure alarm, 3 fan speed control,pressure

gauge, digital thermometer etc. Unit should be suitable for working on heating & cooling mode.

Units shall be suitable to operate on 220+10%V,50Hz, 1 phase AC power supply and shall be

of following nominal capacity :

b. 3.6TR/1140 Cfm - ceiling cassette type unit with remote control. No 12 79319.00 951,828.00

d. 2.5TR/890 Cfm - ceiling cassette type unit with remote control. No 4 73386.00 293,544.00

e. 2.1TR/860 Cfm - ceiling cassette type unit with remote control. No 6 59733.00 358,398.00

g. 1.5TR/550 Cfm - ceiling cassette type unit with remote control. No 2 59000.00 118,000.00

h. 1.0TR/400 Cfm - ceiling cassette type unit with remote control. No 12 48489.00 581,868.00

1.2 Ceiling Suspended type AHUs - with Thermal Break Profile and Mixing Chamber

Supply, Installation, Testing and Commissioning

of double skin air handling units (AHUs)

each comprising of following as per the

specifications :

a. Casing of air handling units shall be in double skin

construction. Inner skin shall be constructed out of

24 gauge plain GS sheet & outer skin in 24 gauge

pre-plasticized GS sheet sandwitched between

50mm thick injected PU foam insulation of density

not less than 40 Kg /CuM and complete with

inspection doors including control wiring as required.

AHUs shall have access for all parts. AHUs shall be

provided with thermal break profile.

b. Fan section complete with forward curved DIDW

type centrifugal fan/s, IP-55, IE3 TEFC squirrel cage

induction motor suitable to operate on 415+10%V, 50Hz, 6

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

3 phase AC power supply and belt drive package.

Fan outlet velocity shall not be more than 1800 FPM (9.2MPS).

Fan section should be completed with 25mm thick

Armasound acoustic insulation.

All fans should be AMCA certified.

c. Coil section with multirows deep chilled water

coil of copper tube & copper header and aluminium fins

construction having wall thickness of tubes not less

than 0.5mm. Drain pan shall be made out of 18 gauge

stainless steel duly insulated. Face velocity across

cooling coil shall not exceed 500FPM.

d. Pre-Filter section complete with 50mm thick

washable synthetic fibre filters. Velocity across

the filters shall not exceed 500 FPM.

e. AHUs shall be provided with mixing chamber with R/A & F/A

openings as per approved shop drawing.

f. AHUs shall be complete with suspension arrangement,

it shall also include spring type vibration isolators and

rubber groomets etc. to make the installation totally

vibration free. AHUs shall have separate compartment

for housing of all valves or extended insulated auxiliary

g. Multiblade box type zero leakage manually operated

extruded aluminium volume control dampers shall be

factory fitted at outlet of each AHU.

h. In addition to the above, air handling units shall be

provided with fire retardant flexible canvass connections

made out of canvass sleeve. Sizes of air handling units

shall not exceed as mentioned in the design drawings

and air handling units shall conform to the design

parameters mentioned in specifications.

AHU shall be provided with mixing chamber & thermal

Provision of installation of EAC System to be provided.

The Air Handling Units (AHUs) shall be of 7

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

following duty parameters :

Rates are included of starter panel suitable capacity vfd complete in all respect

AHU No Capacity S.P Motor Rows of Area to

(TR/Cfm) (mmWG) Rating coil be fed

2.0 PIPING AND VALVES

16.1 CHILLED WATER PIPING

Supplying, laying/ fixing, testing and commissioning of following

nominal sizes of chilled water piping inside the building (with

necessary clamps, vibration isolators and fittings but excluding

valves, strainers, gauges etc.) duly insulated with 80 kg/cum

density resin bonded fiber glass or 144 Kg/ cu m density

mineral wool (non Combustible) pipe section insulation

covered with a layer of 120 gm/sqm polythene sheet (vapour

barrier) and finally applying 0.63mm aluminium sheet cladding

complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as

amended up to date ) at joints and repairing of damage to

building etc. as per specifications and as required.

Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class

as per IS : 1239 and pipes size above 150mm shall be welded

black steel pipe heavy class as per IS: 3589, from minimum

6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from

minimum 7mm thick MS sheet for pipes of 400 mm dia and

Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class

as per IS : 1239 and pipes size above 150mm shall be welded

black steel pipe heavy class as per IS: 3589, from minimum

6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from

minimum 7mm thick MS sheet for pipes of 400 mm dia and

16.1.10 65mm dia.(50mm thick insulation) RM 20 2433.00 48,660.00

16.1.11 50mm dia.(50mm thick insulation) RM 60 2020.00 121,200.00

16.1.12 40mm dia. (50mm thick insulation) RM 120 1718.00 206,160.00

16.1.13 32 mm dia (50mm thick insulation) RM 80 1508.00 120,640.00

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

16.1.14 25 mm dia (50mm thick insulation) RM 400 1354.00 541,600.00

16.2 INSULATED CHILLED WATER PIPING (Nitrile rubber insulation)

Supplying, laying/ fixing, testing and commissioning of following

nominal sizes of chilled water piping inside the building (with

necessary clamps, vibration isolators and fittings but excluding

valves, strainers, gauges etc.) duly insulated with following closed

cell elastometric nitrile rubber of minimum 45 Kg / cu m density,

thermal conductivity 0.037 W/MK or better at 20 deg mean

temperature class 'O' insulation applied by suitable adhesive

complete including repairing of damage to building etc. as per

specifications and as required complete in all respect.

Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as

per IS : 1239 and pipes size above 150mm shall be welded black steel

pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S.

Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS

sheet for pipes of 400 mm dia and above.

Note: The Pipes of sizes 150mm & below shall be M.S. 'C' class

as per IS : 1239 and pipes size above 150mm shall be welded

black steel pipe heavy class as per IS: 3589, from minimum

6.35mm thick M.S. Sheet for pipes upto 350 mm dia. and from

minimum 7mm thick MS sheet for pipes of 400 mm dia and

16.2.10 65mm dia.(50mm thick insulation) RM 2 1794.00 3,588.00

16.2.11 50mm dia.(50mm thick insulation) RM 2 1553.00 3,106.00

16.2.12 40mm dia. (50mm thick insulation) RM 5 1257.00 6,285.00

16.2.13 32 mm dia (50mm thick insulation) RM 10 1047.00 10,470.00

16.2.14 25 mm dia (50mm thick insulation) RM 100 869.00 86,900.00

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating,

having all hermetically sealed inverter type Scroll Compressor(s), minimum two compressors

for above 14 HP modules, microprocessor based Controller, top discharge type condensing

unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as

1 1 required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C per HP 24 16415.00 393960.00

ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3

Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and

ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not

less than 6.5 .

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

Supply, installation, testing and commissioning of following minimum capacity 4-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media

pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil

section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill,

necessary supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have

automatic force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree

C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T"

Joints i.e. Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing

of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system,

complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing

including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell

4 5 elastometric nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

4.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 10 245.00 2450.00

4.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 10 331.00 3310.00

4.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 10 466.00 4660.00

4.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 10 588.00 5880.00

4.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 707.00 56560.00

4.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 80 865.00 69200.00

4.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1022.00 20440.00

4.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 20 1108.00 22160.00

Digitally signed by AMIT

S NO DSR (E & M- DESCRIPTION QUANTIT TOTAL TOTAL

2022)/ MR Y AMOUNT AMOUNT

5 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

6 Cable Trays with Covers

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray

(Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in

convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders

including G.I. bolts & nuts, etc. as required.

6.1 4.6.8 300 mm width X 62.5 mm depth X 2.0 mm thickness meter 50 1190.00 59500.00

6.2 4.6.10 450 mm width X 62.5 mm depth X 2.0 mm thickness meter 47 1574.00 73496.04

7 MR Drain Piping

Supply,installation,testing and commissioning of PVC drain water with necessary clamps,

fittings such as bends tees etc. and duly insulated.

8 MR Supply, Installation, Testing and Commissioning of Central Advance Intelligent Control

Manager with touch color LCD Display, Suitable for automatic control of all indoor units by

schedule function, troubleshooting, auto heat/cool changeover, temperature limitation, history Each 1 115345.00 115345.00

function, etc., complete as per technical specifications, capable of connecting upto 64 nos.

indoor units as required.

TOTAL HVAC WORKS 6808687.0 4694130.0

Digitally signed by AMIT

DESCRIPTION UNIT QTY RATE TOTAL TOTAL AMOUNT NON-

DESCRIPTION UNIT QTY RATE TOTAL TOTAL AMOUNT NON-

AMOUNT DSR DSR (INR)

A. UTP Components for Data

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

1 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, Blue 185 310.00 57350

2 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack Side. Keystone Unshielded Outlet, 180DG C6, Blue 192 310.00 59520

3 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG

U/UTP Patch Cord Blue, LSZH, C6, 2M

4 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M 200 260.00 52000

5 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Data Active 10 6344.00 63440

UTP Components for VOICE

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

1.53 existing surface/ recessed Steel/ PVC conduit as required.

6 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, 185 310.00 57350

Digitally signed by AMIT

7 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack End. Keystone Unshielded Outlet, 180DG C6, For Voice Active Riser Cable

8 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active 8.00 4334.00 34672

9 Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active --- Riser Side 8.00 4334.00 34672

10 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed 200.00 260.00 52000

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

11 Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered Face

Plate white for I/O fixing at user side 190 111.00 21090

Total : A - UTP Components 1120839.45 537544

B. SERVER RACK and Accessories

1 SMART RACK 42U 800/1000D ,Powder coated 800W 42U PRFFUL-4 Nos, CASTOR

MED DTY FT BRAKE 100 KG - 1 No, EQUIPMENT SHELF 725MMD/600W - 3

Nos,KB TRAY ROTARY,19"/1000D+SLIDES 1 No,Fans Set of 4 Nos complete as 2 32500.00 65000

required as per site requirement

2 CABLE MANAGER 1U CLOSED HINGED TYPE Nos. 10 800.00 8000

3 PDU HORIZONTA/VERTICAL 5X15AMP WITH 6 SOCKET WITH 16AMP MCB AND

INDICATOR WITH 3MTR CABLE

4 HARDWARE FRONT PANEL MTG Pkt of 20 pkt 4 1486.00 5944

Total : B - Server Recks & Accessories 0 93804

C. 200 Pair MDF Box

1 200 Pair MDF Box with mounting Frame Nos. 1 10586.00 10586

2 10 Pair Krone Module Nos. 20 433.00 8660

3 25 Pair Riser Cable Mtr. 150 223.00 33450

Total : C - MDF Box 0 52696

Digitally signed by AMIT

D UTP Components for Wifi

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

1 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, White

2 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack end. Keystone Unshielded Outlet, 180DG C6, White

3 Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

4 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 20.00 260.00 5200

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

5 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 20.00 260.00 5200

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

6 Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

Face Plate white for I/O fixing at user side

Total : D - UTP Components for Wifi 68400 24054

E UTP Components for CCTV & Access Control

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the

existing surface/ recessed Steel/ PVC conduit as required.

1 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Work Station end. Keystone Unshielded Outlet, 180DG C6, White Nos. 12 310.00 3720

2 Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination

at Rack end. Keystone Unshielded Outlet, 180DG C6, White Nos. 12 310.00 3720

3 Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred

Jack Panel for CAT6 cable termination at rack end. Voice Active

4 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Field End), High Speed Nos. 12.00 260.00 3120

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

Digitally signed by AMIT

5 Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for

information outlet (I/O) to end user device connectivity. (Rack end), High Speed Nos. 12.00 260.00 3120

Gigabit 26AWG Traceable Patch Cord Grey, LSZH, C6, 2M

6 Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered

Face Plate white for I/O fixing at user side

Total : E - UTP Components for CCTV & Access Control 45600 21356

F. Active Component for Data, Wifi

1 Supply, Installation, Testing & Commissioning of L3 Access Switch with SFP Nos. 1 315000.00 315000.00

plus, supporting 48-Port Layer 3 Stackable Managed Gigabit Switch, catalyst

9500 24x1/10/25G and 4 port 40/100G advantage an 24-port 25/100 G

advantage with 650 W power supply.With the above specifications or higher

SITC of 24 port 10/100/1000 Base T Switch with 4 x 10G SFP+ ports,The

Switch should have 16K MAC/IP address, Should have RJ-45 console port

should support MSTP and DUAL configuration, Should support Static Route

Entry: IPv4 124; IPv6 50 , Should support IP-MAC- Port Binding strictly

management network devices preventing illegal access and the Man-in- the-

middle attack, Should support Asymmetric VLAN, Auto Voice VLAN, Should

support Cable diagnostics, Timebased PoE: PoE ports can be turned on/off by

port or system through schedule, Operating Temperature -5 to 50°C (23 to

SITC of Wifi router 10G compatible with ethernet port 6 GHz 5400mbps dual

3 core one mesh supported wireless 6E wi fi router archer AXE75 including 5 Nos. 10 18000.00 180000.00

amps power socket, IO, pvc box etc mounting arrangement & wifi mapping

complete in all respect

4 SITC of 6mode opticle fibre cable including laying the same in pvc conduit, Mtr 300 380.00 114000.00

HDPE pipe as required at site cost include cost od cable & conduit.

Digitally signed by AMIT

5 Providing and laying of LC- LC multimode OFC type patch cord for data and Nos. 25 3850.00 96250.00

Supply, Installation, Testing and comissioning of Firewall . Supply, Installation,

Testing and comissioning of Firewall. The UTM solution should be Hardware

based, Reliable, purpose-built security appliance with hardened operating

system that eliminates the security risks associated with general-purpose

operating systems. The Xstream Deep-Packet Inspection (DPI) engine

provides high-performance traffic scanning for IPS, AV, Web Protection, and

6 App Control in a single streaming engine. Firewall throughput should be 33 Nos. 1 320000.00 320000.00

Gbps or above, IPS throughput should be 6.5 Gbps, Threat Protection

throughput 1.2 Gbps Concurrent connections 6 Million, New connections/sec

140,000. Should support TLS 1.3 inspection, Next-Gen Intrusion Prevention

(IPS), Zero-day threat protection, Proxy-based dual-engine AV scanning, TLS

1.3 without downgrading, Intelligent traffic selection, Cloud Sandbox/ ATP,

Advanced Web Protection, Advanced Threat Protection, Web caching.

Storage (local quarantine/logs)-Integrated min. 240 GB SATA-III SSD,

Ethernet interfaces (fixed)- 8 x GE copper, 2 x SFP fiber*, 2 x SFP+ 10 GbE

fiber*, Bypass port pairs- 1, Management ports- 1 x RJ45 MGMT, 1 x COM

RJ45, 1 x Micro-USB (cable incl.).

Total : A - Active Component for Data, Wifi 0.00 2213250.00

Total DSR + NDSR 1234839.45 2942704.00

Grand Total 4177543.45

Grand Total 4177543.45

Digitally signed by AMIT

DESCRIPTION UNIT QTY RATE DSR TOTAL AMOUNT

DESCRIPTION UNIT QTY RATE DSR TOTAL AMOUNT

Supply, Installation, Testing & Commissioning of 5MP IR IP H.265 Vandal Proof

Dome camera with 2.8 to 12mm Motorized Lens,Smart IR, up to 30M IR

distance,Up to 120 dB WDR (Wide Dynamic Range),3D DNR (Digital Noise

Reduction),H.265+, H.265, H.264, MJPEG,Corridor mode, Triple streams,3-Axis,

IP67, IK10 Vandal Resistant,Colour: 0.005Lux (F1.4, AGC ON), 0 Lux with

1 IR,Video Compression H.265+, H.265, H.264, MJPEG,Behavior Detection Nos 9 11000.00 99000

Intrusion, Crossing line, Motion detection, Object left, Missing object,Intelligent

Identification Face detection, Defocus, Scene Change,PoE (IEEE802.3 af) Power

consumption: Max 7.2W,Edge Storage Micro SD Card, Up to 256GB, ANR

Support,Working Environment -40°C ~ +60°C, Humidity ≤ 90% RH(Non-

condensing),Compatible Integration ONVIF (Profile S/G), API.

Supply, Installation, Testing and Commissioning of 32Ch Embedded Network

Video Recorder with 4 Sata Supports 1 × RJ45 1000M ,4K Cameras, HDMI,

VGA, RAID, Redundant power supply, Smart Analytics

SITC of Hard Disk Drive 10TB, 24/7 surveillance category Only complete etc as

required.etc.all complete.

Supply, Installation, Testing & Commissioning of 32" Flat Screen HD led (24X7)

4 with Interfaces include HDMI, DVI, D-sub, Component and Composite input as Nos 1 27659.00 27659

well as RS-232C and RJ45 for extensive connectivity, remote control and wall

mount unit / floor stand complete with making connections etc complete as reqd.

5 SITC of HDMI cables 10 meters M2M etc all complete. Nos 1 1857.00 1857

Supply, Installation, Testing & Commissioning of signal/power cable for the above 1

SITC of Wifi router 10G compatible with ethernet port 6 GHz 5400mbps dual core

one mesh supported wireless 6E wi fi router archer AXE75 including 5 amps

power socket, IO, pvc box etc mounting arrangement & wifi mapping complete in

Total DSR + NDSR 0 323104

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO Luminaire Description UOM QTY Unit Price Image

Recessed downlight luminaire with HPE (High-

Performance Efficiency) LED (Light Emitting Diode)

maximum system power: 15 W, minimum Luminous flux

of luminaire 1650 lm, 110 Lm/w, Colour temperature of

4000 K, Neutral white, CRI > 80, R9>0, THD<5%,

P.F>0.95, Driver Efficiency>88%, SDCM<3, 230 V

constant current driver, 70% of luminous flux after

1 MR 50,000 operating hours; Energy efficient NOS 80 1840.00 147200.00

LEDs, Direct light emission, Luminaire housing

in aluminium, Polyester powder white coloured coat

applied over a 5- stage pre-treatment, Prismatic deep

recessed diffuser for homogenous light distribution,

UGR<19, ZHLS (ZERO HALOGEN LOW SMOKE)

wiring, Electronic control gear, Protection class II, IP 20

COB based LED recessed directional downlight , with

HPE (High-Performance Efficiency), with maximum

system power: 18 W, minimum Luminous flux of

luminaire 1980 lm, 110 Lm/W, Colour temperature of

4000 K, Neutral white, CRI > 80, R9>0, THD<5%,

P.F>0.95, Driver Efficiency>88%, SDCM<3, 230V

constant current driver, 70% of luminous flux after

2 MR 50,000 operating hours; energy-efficient LEDs, direct NOS 10 4050.00 40500.00

light emission, housing in die-cast aluminium, Polyester

powder white coloured coat applied over a 5-stage pre-

treatment ceiling trim, deep recessed clear glass cover

with aluminium reflector and a beam angle of 25°,

UGR<16, ZHLS (ZERO HALOGEN LOW SMOKE)

wiring, electronic control gear, Protection class II, IP 40,

Digitally signed by AMIT

Pendant luminaire with LED(Light Emitting Diode)

maximum system power: 26W, minimum luminous flux

of luminaire 2730lm, a colour temperature of 4000K,

neutral white, CRI>80, 230V constant current driver,

70% of luminous flux after 50,000 operating hours;

energy efficient LEDs, direct light emission, aluminium

housing powder coated black, integral electronic control

gear, SDCM <3, T.H.D≤ 10%, driver efficiency ≥ 88%,

surge protection of 2.5kV, Protection class I, IP20, Ø

COB based pendant downlight luminaire Rea

100 with maximum system power: 15 W, minimum

Luminous flux of luminaire 1650 lm, 110 Lm/W, Colour

temperature of 4000 K, Neutral white, SDCM<3, CRI >

80, 230 V constant current driver, 70% of luminous flux

after 50,000 operating hours; Energy efficient LEDs,

Direct light emission, Luminaire housing in aluminium,

Polyester powder black coloured coat applied over a 5-

stage pre-treatment, Clear glass cover, beam angle of

36°, ZHLS (ZERO HALOGEN LOW SMOKE) internal

wiring, Electronic control gear, Protection class II, IP 20,

Digitally signed by AMIT

LED Pendant direct and Indirect luminaire Light Up with

HPE(High Performance Efficiency) LED (Light Emitting

Diode) maximum system power: 18W, minimum

luminous flux of luminaire 2340lm, CRI > 80, R9>0,

THD<5%, P.F>0.95, Driver Efficiency>88%, SDCM<3,

230V constant current driver, 70% of luminous flux after

50,000 operating hours; energy efficient LEDs, neutral

white, colour temperature of 4000K, direct light

emission, luminaire profile in aluminium, polyester

powder coat applied over a 5- stage pre-treatment, Dual

optic of lens with specular louver + Raster, Indirect

lighting with the use of Lens for 160deg. beam

angle/batwing distribution, UGR<16, internal wiring,

electronic control gear, sliding fixing wire suspension,

Protection class I, IP40, L = 1186 mm B = 68 mm H =

60 mm max. PL = 1500mm

Pendant luminaire with HE-High Efficiency LED (Light

Emitting Diode), maximum system power: 28W,

minimum luminous flux of luminaire 3360 lm, 120 Lm/W,

colour temperature of 4000K, CRI>80, R9>0, THD<5%,

P.F>0.95, Driver Efficiency>88%, SDCM<3, 230V

constant current driver, 70% of luminous flux after

50,000 operating hours, energy efficient LEDs, direct

light emission, luminaire profile powder coated white,

Prismatic diffuser for homogenous light distribution,

Driver replacement from the top without opening the

optical part, UGR<19, ZHLS(ZERO HALOGEN LOW

SMOKE) internal wiring, integral electronic control gear,

Protection class I, IP40, L = 1175 mm, B = 52 mm, H =

Digitally signed by AMIT

LED recessed luminaire Zen22 SM with LED(Light

Emitting Diode) maximum system power: 25W,

Luminous flux of luminaire 3500 lm, 140 Lm/w, colour

temperature of 4000K, neutral white, 230V constant

current driver, 70% of luminous flux after

50,000 operating hours, energy efficient LEDs, CRI>80,

7 MR R9>0, THD<5%, P.F>0.95, Driver Efficiency>88%, NOS 200 2800.00 560000.00

SDCM<3, electronic control gear, direct light emission,

sheet metal CRCA housing, polyester white powder coat

applied over a 5-stage pre-treatment, Prismatic diffuser

for glare-free uniform light distribution, UGR<19,

Protection class I, IP40, surge protection of 2.5kV, L =

LED Pendant luminaire circular shape 1200 with

LED(Light Emitting Diode), maximum system power of

45W (20 W Up and 25 W Dn), minimum luminous flux

of luminaire 4500 lm, the colour temperature of 4000K,

neutral white, SDCM<3 , THD<5% , R9>0 , PF>.85 230

V constant current driver, 70% of luminous flux after

8 MR 50,000 operating hours; energy-efficient LEDs, direct- NOS 2 74500.00 149000.00

indirect light emission, aluminium housing, polyester

powder coat aluminium black, applied over a 5-stage pre-

treatment, prismatic diffuser for glare-free homogeneous

illumination, electronic control gear, Protection class I,

IP20, Ø = 1200 mm, H = 75 mm, B = 55 mm, max. PL =

Pendant luminaire Kalypso with 16 LED bulbs, system

colour temperature of 3000K, warm white, frame

constructed of brass,

Protection class II, I.P. 20,

Digitally signed by AMIT

LED strip (flexible) with 60 LEDs per meter, 10W per

Meter, 4000K, 2835 SMD package with thermal tape of

10 MR high thermal convection factor, beam angle of 120°, MTR 146 900.00 131661.00

MacAdum 5, constant voltage driving circuit, L =

Ceiling Mounted luminaire Rialto with LED (Light

Emitting Diode) system power: 42W, luminous flux of

luminaire 4200lm, 4000K, neutral white, CRI>80,

SDCM<3 , THD<5% , R9>0 , PF>.85 230V, direct light SQ

emission, fire resistant fabric, aluminium profile MTR

polyester white powder coat applied over a 5 stage pre-

treatment, once installed can be maintained without

detaching the fabric, Protection class I, IP40,

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR (E & M - QUANTI TOTAL

SNO. DESCRIPTION UNIT RATE TOTAL AMOUNT

SNO. DESCRIPTION UNIT RATE TOTAL AMOUNT

2018) / MR TY AMOUNT

DSR ( INR ) N0N -DSR ( INR )

Supplying, installation, testing & commissioning of

intelligent analog addressable photothermal

detector complete with mounting base complete as

Supplying, installation, testing & commissioning of

response indicator on surface/recessed MS Box

having two LED, metallic cover complete with all

connections etc as required.

Supplying, installation, testing & commisssioning of

6 17.2.6 intelligent addressable programmable sounder No 3 2651.00 7953.00

complete as required.

Supplying, installation, testing & commissioning of

fault isolator complete with base as required.

Supplying, installation, testing & commissioning of

intelligent addressable thermal detector with rate of

rise cum fixed tempreature thermistor complete with

base as required.

Supplying, installation, testing & commissioning of

7 17.2.10 addressable fire control module complete as No 6 3003.00 18018.00

Digitally signed by AMIT

Supplying, installation, testing & commissioning of

8 17.2.11 addressable phone control module complete as No 3 3267.00 9801.00

Supplying, installation, testing & commissioning of

intelligent addressable duct

detector including suitable Photo detector complete

with base as required.

Supplying, installation, testing & commissioning of

addressable horn cum strobe complete as required.

Supplying, installation, testing & commissioning of

addressable manual call point complete as required.

Supplying, installation, testing & commissioning of 6

zone, voice alarm controller with USB, MP3 player

12 17.3.1 (including 6 zone button paging station) with No 1 126411.00 126411.00

seamless integration facility with main fire alarm

panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of

1.5/3/6W ceiling speaker complete as required.

Supplying, installation, testing & commissioning of

14 17.3.7 digital audio amplifier 75 Watt, 25V rms operating at NOS 2 145793.00 291586.00

240 Volt AC Supply complete as required.

Digitally signed by AMIT

Supplying & laying of 2x1.5 sqmm fire alarm

armoured cable, 600/1000V rated with annealed

15 17.5.2 copper conductor having XLPE insulation, steel wire Mtr. 1862 173.00 322102.00

armouring & FRLS outer sheath complete as

Supplying and drawing of cable Fire Retardant PVC

insulated copper conductor cable in the existing

17.5.3 surface / recessed steel conduit of following pairs,

cores and size including connections and

interconnections etc. as required.

16 17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 800 89.00 71200.00

Supplying and fixing 25 mm dia MS flexible pipe

17 17.5.4 with PVC coating along with all ancillaries and Metre 700 53.00 37100.00

accessories like coupler etc. as required.

Supplying & Fixing of battery operated illiminated

18 M.R. "EXIT" signage, with 2hrs power Battery backup NOS 8 3870.00 30960.00

complete as required.

Supplying, installation, testing & commissioning of

20 17.3.9 Voice command keypad 6 zone, with microphone NOS 1 81756.00 81756.00

assembly complete as required.

21 Loop Card capacity of 159 detectors For BMS Fire Nos 1

22 MR Interface Card for BMS fire integration Nos 1 55000.00 55000.00

23 Supply of repeater panel having 640 character liquid Nos 1

crystal with backlit control

Supplying, installation, testing & commissioning of

Digitally signed by AMIT

TOTAL FIRE ALARM WORKS DSR +NDSR 1446498.00 333371.40

Grand Total 1779869.40

Grand Total 1779869.40

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - EPABX

TOTAL TOTAL AMOUNT

TOTAL TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE

AMOUNTDSR NON DSR

Supply, Installation, Testing & Commissioning of Server based

Communication System with all the required Software licenses and

Hardware - IP-PBX/IP Telephony Communications Server: The IP

Telephony Solution shall support the following Services - Voice,

Video, IM, Presence and Audio Conference The Solution should be

built on Active-Redundant Servers The IP Telephony Solution should

support H.323 and SIP The Solution should support the following

Trunks - FXO, E1 PRI and SIP The IP Telephony solution should

1 incorporate all licenses for the Phones and Trunks Solution should Nos 1 368000.00 368,000

support 100 Extensions from Day 1 with future scalabilityupto 1000

users. Licenses for all Phones supplied should be provisioned on

Day1 Solution should support Hard IP Phones, Softphones, Video

Phones, 50 Analog Extensions with necessary Licenses, Rack mount

architecture, complete as required and as per technical

specifications.

1 Digitally signed by AMIT

Supply, Installation,Testing and commisioning of Executive Level IP

Phone with Color display – 3.7 inches x 2.1 inches (9.5 cm x 5.4 cm)-

Diagonal width: 4.3 inches (11 cm), Touch Screen display, 4-position

adjustable tilt display, Permanently-labeled feature buttons:,

speaker, mute, headset, contacts, home, history, message, phone,

forwarding, volume (separate volume levels in handset, speaker,

ringer, and headset), Red LEDs on speaker, mute, headset,

message and history, 24 administrative buttons, Wideband

speakerphone 0-5 Softkeys, Ergonomic hearing aid compatible,

handset supporting TTD acoustic coupler, Bluetooth and DECT

headset support with adapter, Message waiting indicator, Ethernet

2 (10/100/1000) line interface, Secondary Ethernet (10/100/1000)line Nos 10 12500.00 125,000

interface, Optional IEEE PoE 802.3af adapter registers as class 2

device, SIP protocol, H.323 protocol support, Standards-based

codec support: G.711, G.726, G.729A/B, G722 , Supports the

following languages: Arabic, Brazilian Portuguese, Simplified,

Chinese, Dutch, English, Canadian,French, Parisian French,

German,Hebrew, Italian, Japanese (Kanji,Hiragana and Katakana),

Korean, Latin American Spanish, Castilian Spanish, and Russian.

Includ Licence.

Supply Installation, Testing and Commissioning of Analog Speaker

3 Phone with backlight. Nos 90 2750.00 247,500

Total DSR + NDSR - 740,500

GRAND TOTAL 740,500

GRAND TOTAL 740,500

2 Digitally signed by AMIT

S No Description Unit Qty Rate NON DSR

Supply, Installation, Testing and Commisioning of smart

card reader/proximity card readers including fixing the

1 MR same on doors, power supply arrangement complete in Nos 12 8532.00 102384

Supply Installation Testing & Commissioning of Access

Control Software Multi Reader and controller

confuguration and upgradable to Enterprise level with

500 users. Databse Supports: MS SQL, Oracle, and MS

Access database types. Type of technology supports:

IRIS Sacnner, Biometric, Face, RFID , etc supports

template management , Highly secured communication

2 MR with server,Allows for real- time monitoring of system Nos 1 236,000 236,000

status and user activities with optional audio alerts.

tamper detection, network communication loss, and

many other system attributes. including desktop i7, 12th

generation processer 16 Gb RAM, 22" LED/TFT

windows operating system, UPS 1 KVA complete in all

SITC of Access IP Master Controller with Enclosure &

including SMPS Power Supply- controllling 2 access

points Universal 2 Reader TCP/IP Controller

Expandable upto 6 Reader with exit reader module,4

Programmable inputs & 4 outputs 100 mA MAX

3 MR ),Temperature: 0 to 70°C (35 -150°F); Humidity: 20 to Nos 6 45,019 270,114

80% RH (non-condensing) , 3000 USERS & 3000

transactions,2 Reader.

Supply, Installation, Testing & Commissioning of Smart

card compatible with Frequency Excitation (13.56 MHz)

Mifare/I- class technology smart Card. Memory Type

4 MR EEPROM,Complies with ISO/IEC standards for Nos 100 400 40000

thickness. Lifetime Warranty.(Printing will be done by

PMBI officials)

Digitally signed by AMIT

Supply Installation Testing and Commissioning of single

leaf/double leaf heavy duty 600 LBS Door Electro

5 MR Magnetic Lock with complete compatiable Bracket UL Nos 12 10,714 128,568

Supply Installation Testing and Commissioning

Touchless Request to Exit button with detection range

Supply Installation Testing and Commissioning Fire Exit

7 MR panic Bar single/double Door with EM lock and Nos 3 9,125 27,375

requiredaccessories all includes.

Supply Installation Testing and Commissioning

Emergency Door Release Button, Gree, Key

8 MR Resettable, DoublePole Double Throw. Nos 6 805 4,830

Supply Installation Testing and Commissioning of 8

Core-conductor 20 to 22 AWG.

Supply Installation Testing and Commissioning of AC 3

10 MR Core Plain Copper conductor, PVC insulated. Mtr 450 68 30,600

Supply Installation Testing and Commissioning of

proximity color card printer with thermal printing

11 MR technology compatible with PC/ desktop including Nos 1 98,500 98,500

printing software complete in all respect

Supply Installation Testing and Commissioning of

biometric machine having USB port, face recognization,

12 MR finger print, sensing with inbuilt registration software and Nos 1 60,000 60000

attendance log preparation

Digitally signed by AMIT

Fire Piping, Hydrants, Sprinklers and Accessories

DSR WET RISER DESCRIPTION UNIT QTY RATE TOTAL TOTAL

S No AND SPRINKLER AMOUNT AMOUNT NON-

SYSTEM 2019 DSR (INR) DSR (INR)

Providing, laying, testing & commissioning of 'C'

class heavy duty MS pipe conforming to IS 3589/IS

1239 including Welding, fittings like elbows, tees,

flanges, tapers, nuts bolts, gaskets etc. and fixing

the pipe on the wall/ceiling with suitable

1.0 18.7 clamp/support frame and painting with two or more

coats of synthetic enamel paint of required shade

complete as required :

Providing, fixing, testing & commissioning of 15mm

dia quartzoid bulb type sprinklers of rating 68

2.0 18.21 degree centigrade with required accessories :

Digitally signed by AMIT

b. 18.21.2 Upright sprinkler Each 25 522.00 13050.00

Providing, installation, testing & commissioning of

adjustable rosette plate for 15mm dia in white finish

3.0 18.29 UL Listed or FM approved complete as required. Each 245 225.00 55125.00

Supplying, installation, testing & commissioning of

sprinkler flexible pipe (UL Listed) of

stainless steel complete with 15 NPT on reducer

thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with

branch line (Inlet) 25mm NPT male thread to

sprinkler head (Outlet) 15mm NPT female thread

4.0 18.25 with reducer, nipple, 2 side brackets, center

bracket, stockbar of following sizes complete as

Supplying, fixing, testing and commissioning of

butterfly valve of PN 1.6 rating with

bronze/gunmetal seat duly ISI marked complete

5.0 18.11 with nuts, bolts, washers, gaskets

conforming to IS 13095 of following sizes as

Providing & fixing flow switch in following sizes M.S.

pipe including connection etc as required.

a. 18.23.1 100 mm nominal bore Each 2 7514.00 15028.00

Digitally signed by AMIT

Providing and fixing ISI Marked of approved make

7.0 MR Fire Extinguishers complete with all accessories as

per manufacturer's specifications.

MR a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 8 7500.00 60000.00

b) Mechanical Foam gas cartridge type. 9 Kg

capacity (IS:15683).

c) ABC dry powder stored pressure type 6 kg

capacity (IS:15683).

Providing & fixing of clean agent gas based gas

supression system including actuator, necessery

piping, control valve, control panel, smoke detector,

first fill of gas, cylinder of suitable capacity based on

residue free stored pressure FE-36 Dupont- HFC-

236fa multipurpose type having 0% ODP with

magnetic pressure gauge having the facility to

check with the magnetic pressure kit on site

MR pressurised by dry nitrogen, can height 341MM,

diamater is 108 MM Gross weight 3.6Kg, empty

weight 1.6 Kg, discharge time is minimum 6 sec,

controllable discharge machanisim, embossed fire

rating as per the BS EN 3 - 21B, BIS 15683 marked

with EPDM Hose with helium leak detection tested

and certificate enclosed.

Capacity 5.0 kg (ceiling mounted for electrical and

server & ups room) NOS 6 44560.00 267360.00

Grand Total 1438980

Grand Total 1438980

Digitally signed by AMIT

Audio visual system

Sno Description Qty Unit Rate Total DSR Total NDSR

Supply, installation, testing and commissiong of Video wall 2 panels x 2

panels With diagonal size 55'' each, Resolution 1920 * 1080 ( 16:9),

Brightness 500 nit , orientation Landscape/Portrait, Haze 25 %, contrast ratio

1200: 1, IP Rating IP5x, type IPS,color Gamut 72,Bezel Widht(mm) -

2.25mm(U/L), 1.25mm(R/B), Temperature Sensor,Video Wall Daisy

Chain(10x10),DP 1.2 Digital Daisy Chain(Supporting UHD Resolution, HDCP

1 support),Clock Battery(168hrs Clock Keeping),Auto Source Switching & 1 Nos 750,000.00 750,000.00

Recovery, RS232C/RJ45 MDC,Button Lock,Smart F/W update etc all

Supply, installation, testing and commissiong of 4k UHD LED panel Diagnol

size 64.5" / 163.9cm, Resolution 3840x2160(16:9), Brightness(Typ.) 700 nit,

Orientation Landscape / Portrait , Contrast Ratio (Typ.) 4000:1, Haze Non-

Glare , Type VA, Active Display Area 1428.48 (H) x 803.52 (V) , Pixel Pitch

(mm)0.372 x 0.372, Color Gamut 92% (DCI-P3, CIE 1976), Operation Hour

24/7, INPUT VIDEO DP 1.2 (1), HDMI 2.0 (3), INPUT AUDIO N/A, INPUT

USB USB 2.0 x 2, OUTPUT VIDEO N/A , OUTPUT AUDIO Stereo mini Jack,

2 OUTPUT USB N/A, WiFi / BT O / O, EXTERNAL CONTROL 2 Nos 163,200.00 326,400.00

RS232C(in/out), RJ45, Speaker 10W 2ch, Dimension(mm) Set 1453.9 x

831.0 x 46.3 , Operating System Tizen 6.5, Storage 16 GB, Processor

Cortex A72 1.7GHz Quad-Core CPU, Safety 60950-1 / 62368-1, EMC Class

B, IP Rating IP5x, Security 802.1x(WPA2 Enterprise) : EAP-TLS, EAP-TTLS,

EAP-PEAP, Power Supply AC 100 - 240 V, 50/60 Hz, Temperature 0℃~

40℃, Relative Humidity 10~80%, etc all complete.

Digitally signed by AMIT

Supply, installation, testing and commissiong of 1*4 distribution amplifier with

Automatic down-conversion on the output from 4k to 1080p if required by the

connected HDMI display, Advanced EDID Management,CEC support (pass-

through),HDMI 2.0 signal support,Input cable equalization,Compact

size,Support for all HDMI 2.0 embedded audio formats,Mounting ears for

easy fixture,EDID emulation of factory EDIDs, EDIDs read dynamically from

the outputs, or custom EDID stored in memory,3D pass-through

3 support,EDID emulation in transmitter, HDCP enable/disable function on 1 Nos 83,300.00 83,300.00

input,No signal latency, zero frame delay, Firmware upgrade through USB all

Supply, installation, testing and commissiong of HDMI transmiter which can

be remote powered through CATx cable (12V),Supports HDMI 3D signal

formats ,Supports deep color signals (24/30/36 bit RGB/YCbCr

maximum resolutions (300MHz),Supports all VESA and HDTV

resolutions,HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant,Bi-directional RS-

232 extension (pass-through),HDCP 2.2 compliant (transparent pass-

through),Compatible with 120 Hz 3D video signals,Uncompressed video up

to 9 Gbps datarate,No signal latency, zero frame delay,Selectable operation

mode (Auto or forced Long Reach mode)Cross compatible with TPS series

Lightware extenders and I/O boards (HDBaseT compatible),Supports all

embedded audio formats (including PCM, Dolby Digital and DTS high bitrate

audio).Extension distance up to 170 meters (with CAT7 S/FTP AWG23

cable, 1920x1080p60),HDBaseT compatible,Transparent EDID pass-

through,Bi-directional IR extension (pass-through),CEC support (pass-

through),Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or

@60Hz YUV 4:2:0, up to 9 Gbps),No video compression,Bi-directional RS-

232 and IR extension (pass-through),Status LEDs (Live, TPS link, signal and

HDCP detect),Twist-and-lock DC power connector,Low power mode

(standby),Local or remote (remote-send / remote-receive) power

source,External universal power adaptor all complete.

Digitally signed by AMIT

Supply, installation, testing and commissiong of HDMI receiver which can be

remote powered through CATx cable (PoE PD), Supports HDMI 3D signal

formats (frame packing, side-by-side and top-bottom), Supports deep color

signals (24/30/36 bit RGB/YCbCr 4:4:4), 1920x1080@120Hz/4:4:4,

4096x2160@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz),

Supports all VESA and HDTV resolutions, HDMI 1.4, HDCP 1.4 and DVI 1.0

compliant, Bi-directional RS-232 extension (pass-through), HDCP 2.2

compliant (transparent pass-through), Compatible with 120 Hz 3D video

signals, Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock),

No signal latency, zero frame delay, Selectable operation mode (Auto or

forced Long Reach mode), Cross compatible with TPS series Lightware

extenders and I/O boards (HDBaseT compatible), Supports all embedded

5 audio formats (including PCM, Dolby Digital and DTS high bitrate audio), 1 Nos 132,600.00 132,600.00

Extension distance up to 170 meters (with CAT7 S/FTP AWG23 cable,

1920x1080p60), HDBaseT compatible, Ethernet extension (100 Mbps),

Selectable IR output mode for emitter or wired connectivity, Transparent

EDID pass-through, Bi-directional IR extension (pass-through), CEC support

(pass-through), Supports HDMI 4K signal formats (4K UHD @30Hz RGB

4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps), No video compression etc all

Supply, installation, testing and commissiong of delegate unit with network

based architechture, Crystal‑clear sound due to a very high signal‑to‑noise

ratio, Maximum speech intelligibility is guaranteed, The loudspeaker and

microphone can be active at the same time to facilitate a face‑to‑face

meeting experience. A feedback suppressor is built in to prevent acoustic

feedback, OLED screen, inbuilt loudspeaker, Enables participants to speak

and listen to the proceedings, Operates as stand-alone discussion system or

connects to external AV equipment or videoconferencing system,

Headphone socket with built-in volume control, Line-in interface to connect

6 device to the ongoing conference, A 48-bit digital audio signal is transported 30 Nos 23,650.00 709,500.00

to each discussion unit for real-time monitoring from the loudspeaker, GSM

immune, Built-in loudspeaker, the unit should show time/date on the screen.

Should have timer on display to set for each delegate to speak, should have

touchable button interface, Sensitivity: -46 dBV / Pa, Directivity: 0 ° / 170 °>

20 dB (1 kHz), Headphone load: 16Ω, Input impedance: 2kΩ, signal to noise

ratio: 70dB, Frequency response: 20 ~ 20000Hz, should have hot swap

functionality.Bidder should provide bid specific OEM authorization etc all

Digitally signed by AMIT

Supply, installation, testing and commissiong of chairman unit with priority

and network based architechture, Crystal‑clear sound due to a very high

signal‑to‑noise ratio, Maximum speech intelligibility is guaranteed, The

loudspeaker and microphone can be active at the same time to facilitate a

face‑to‑face meeting experience. A feedback suppressor is built in to prevent

acoustic feedback, OLED screen, inbuilt loudspeaker, Enables participants

to speak and listen to the proceedings, Operates as stand-alone discussion

system or connects to external AV equipment or videoconferencing system,

Headphone socket with built-in volume control, Line-in interface to connect

device to the ongoing conference, A 48-bit digital audio signal is transported

to each discussion unit for real-time monitoring from the loudspeaker, GSM

7 immune, Built-in loudspeaker, the unit should show time/date on the screen.

Should have timer on display to set for each delegate to speak, should have

touchable button interface, Sensitivity: -46 dBV / Pa, Directivity: 0 ° / 170 °>

20 dB (1 kHz), Headphone load: 16Ω, Input impedance: 2kΩ, signal to noise

ratio: 70dB, Frequency response: 20 ~ 20000Hz, should have hot swap

functionality etc all complete

Supply, installation, testing and commissiong of digital discussion central

controller, should expand up to 2500 or more discussion devices and easily

connected to audio system, with short‑circuit protection, freestanding or 19”

rack mounted, transmit upto 64 channels of audio, 48K audio sampling rate

and 20Hz ~20KHz frequency response, sensitivity of the microphone and 8

segment equalizer EQ should be adjusted independently, should have 16

segment equalized EQ, AGC, AEC, AFC, USB recording, should have

atlesat 4 dante output ports, shoudl have TCP/IP connection for software

server and controller, RS232 for control, RS232 or RS485 to achieve look at

8 me functionality, Hot plug-and-play, shoudl have voting functionality, should 1 Nos 160,650.00 160,650.00

have LCD display on controller to show all functions, should have 3.5mm

headphone for monitoring, 2 audio input ports, 1x RCA, 1x XLR and atleast 5

audio output ports, atleast 3 ports for conneciton of loops or series

connection, (S / N) >97dBA, Total harmonic distortion <0.05%, Channel

Crosstalk> 84dB, Dynamic range >93dB etc all complete

Digitally signed by AMIT

Supply, installation , testing & commissioning of 30x optical zoom PTZ

camera with SDI, HDMI, RJ45, RS232/RS485 connectors, should be

compatible witht the wirless conference controller to enable look at me

9 feature, should have BIS, CE, FCC, ROHS, should be supplied with mounts 3 Nos 180,960.00 542,880.00

as per site requirement etc all complete

Supply, installation , testing & commissioning of camera switcher and mixer

with atlease 6 video input ports with 2 HDMI and 4 SDI ports, suystem

should have capability to do PIP and PBP output, shoudl have one HDMI

output with parellel local monitor output, should have RS232 port for

integration with thirdparty devices, should have audio and video bridging

10 builtin the system through USB passthrough for integration with all cloud 1 Nos 198,900.00 198,900.00

based video conferencing solutions, should have audio input,

bidder to submit bid specific OEM authorization etc all complete

Supply, installation , testing & commissioning of Ceiling Speaker - 8" /

7.5&15W, Power(RMS):7.5W/15W, Impedance: 8 ohms , Line Voltage:

11 70V/100V AC, Frequency Response: 85Hz-17KHz, Sensitivity(1w/1m): 10 Nos 2,465.00 24,650.00

91dB, Speaker unit: 8" (203mm) , Cutout Dimension: Φ 220mm, Over

Dimension: Φ 250*75mm

Supply, installation , testing & commissioning of Mixing Amplifier-250W, Built-

in MP3 player and FM tuner and remote control, MP3 Player with USB,SD

port and fluorescent screen to display the sound number, Four function

buttons: previous, play/stop, next and mode, 70V,100V and low impedance 4-

12 16 ohms speaker output, 5 zone and all zone speaker outputs, Three Mic 1 Nos 26,826.00 26,826.00

input by phone jack type, AUX 1-3, Mic 1-3 volume controls and bass/treble

tone control, High temp, overload and short-circuit protection

Supply, installation , testing & commissioning of 24U rack Approved

Supply, installation , testing & commissioning of speaker cable 1.5sqmm 2

cose etc including conduiting,casing caping, chase cutting at site complete in

14 all respect 300 Meter 80.00 24,000.00

Supply, installation , testing & commissioning of UTP Cat6 cable in 25mm

conduit etc including conduiting,casing caping, chase cutting at site complete

15 in all respect 1200 Meter 95.00 114,000.00

Digitally signed by AMIT

Supply, installation , testing & commissioning of 15 meter HDMI cable etc

including conduiting,casing caping, chase cutting at site complete in all

Supply, installation , testing & commissioning of 1.5 meter HDMI cable etc

17 including conduiting,casing caping, chase cutting at site complete in all 5 Nos 2,300.00 11,500.00

Supply, installation , testing & commissioning of 23Awg or better microphone

cable etc including conduiting,casing caping, chase cutting at site complete

Supply, installation , testing & commissioning of 42U equipment rack etc

10 pax meeting room

Supply, installation, testing and commissiong of Diagonal Size interactive

65' 4k LED TV', type 60Hz New Edge , Resolution 3840 x 2160 (Landscape),

Brightness 350 (without glass) 220 (with glass),Contrast Ratio 4000:1,

Viewing Angle 178:178 degree, Response time (G to G) - 8ms, Speaker Built

in speaker (10 W *2 ), Connectivity input (Basic) HDMI 2, (With Tray) HDMI

3, USB (Basic) USB 1, (With Tray) USB 2, USB External (In/Out) 1, Output

touch out (Basic) Touch Out 1 (USB Upstream Type), Audio Out 1 (With

Tray) Touch Out 2, Audio Out 1, Screen Share(HDMI-Out) 1,internal sensor

(Basic) Acceleration sensor,(With Tray) Acceleration sensor, NFC, External

Control Touch Input, RS232C, RJ45, Touch type InGlass , Touch Pen type

1 passive pen with Magnet , object Recognition range 2mm/ 4mm / 8mm / 1 Nos 168,300.00 168,300.00

50mm , 1024 Level on Brush Mode, touch response time 6.7ms,Super Clear

Coating, Temperature Sensor, Pivot Display, Clock Battery(168hrs Clock

Keeping),Built in Speaker(10W x 2), WiFi Module Embedded , Processor

CA72 Quad(1.7GHz), on chip cache memory L1 (I/D) : 32KB / 32KB, L2

(Unified) : 1MB,Clock speed 1.7GHz CPU Quad,Main Memory Interface

LPDDR4 1.6GHz 64bit 2.5GB,Graphices 2D & 3D Graphics Engine - Up to

1920x1080. 32bpp - Supports OpenGL ES,Storage 8GB(2.65GB Occupied

by O/S, 5.35GB Available),Operating System VDLinux, etc all complete.

Digitally signed by AMIT

Supply, installation, testing and commissiong of All-in-one design video

conferencing bar The three-in-one design of 4K ultra HD camera, beam-

forming microphone and full-frequency loudspeaker reduces wiring and

makes video communication easy, 4K UHD Using 1/2.5 inch, 8.51M pixel

high quality UHD CMOS sensor, 4K (3840x2160) @ 60fps ultra high

resolution clear image, and downward compatible with 1080P, 720P and

other resolutions. Can meet the needs of users for different video

experiences, and can provide clear, real, smooth and accurate

communication, Wide FoV 120°wide field of view (110° horizontal field of

view), 5 times zoom, optical lens customized for the conference scene,

builtin electric head (horizontal and pitch ±15° motion range), no need to

worry about the camera position, participants can easily enter the scene

clearly, Beam Forming (BF) microphone is built in, with a pickup distance of

6 meters. Low-distortion transverse beam-forming algorithm can direct the

2 microphone directly to the speaker, with better sound, clearer 1 Nos 130900.00 130,900.00

communication, fuller and more authentic.Built-in audio 3A algorithm

(AEC/AGC/ANS), full duplex dialogue, can meet the communication needs of

different room structures, whether sitting at a conference table, sitting

against the wall or standing, can have comfortable experience for calling,

Full frequency speaker Full frequency Hi-Fi loudspeaker, professional

acoustics design, reduce noise interference, provide outstanding sound

effect, Plug and play type Through plug and play USB interface connect with

the computer or business display screen, very easy to use. Less wiring,

convenient video communication, reduce the user's learning cost, Built-in

intelligent analysis algorithm, listening to the speaker position, automatic

framing of participants, automatic tracking of speakers, switching the

speaker screen, to ensure that the speaker is always clearly in the picture,

Rich interfaces Support HDMI 2.0 and USB 3.0 audio video output

simultaneously, Easy installation etc all complete. Approved makes: Poly/

Supply, installation , testing & commissioning of 15 meter HDMI cable etc

3 including conduiting,casing caping, chase cutting at site complete in all

Supply, installation , testing & commissioning of USB 3.0 Extention cable 10

4 meter etc including conduiting,casing caping, chase cutting at site complete 1 Nos 9000.00 9,000.00

CMD cabin 0.00

Digitally signed by AMIT

Supply, installation, testing and commissiong of Diagnol size 54.6" /

138.7cm 4k LED TV, Resolution 3840x2160(16:9), Brightness(Typ.) 700 nit,

Orientation Landscape / Portrait , Contrast Ratio (Typ.) 4000:1, Haze Non-

Glare, Type VA, Active Display Area 1209.6(H) x 680.4(V) , Pixel Pitch (mm)

0.315 x 0.315, Color Gamut 92% (DCI-P3, CIE 1976), Operation Hour 24/7,

INPUT VIDEO DP 1.2 (1), HDMI 2.0 (3), INPUT AUDIO N/A, INPUT USB

USB 2.0 x 2, OUTPUT VIDEO N/A , OUTPUT AUDIO Stereo mini Jack,

OUTPUT USB N/A, WiFi / BT O / O, EXTERNAL CONTROL

1 RS232C(in/out), RJ45, Speaker 10W 2ch, Dimension(mm) Set 1235.1 x 2 Nos 82450.00 164,900.00

707.9 x 46.3, Operating System Tizen 6.5, Storage 16 GB, Processor Cortex

A72 1.7GHz Quad-Core CPU, Safety 60950-1 / 62368-1, EMC Class B, IP

Rating IP5x, Security 802.1x(WPA2 Enterprise) : EAP-TLS, EAP-TTLS, EAP-

PEAP, Power Supply AC 100 - 240 V, 50/60 Hz, Temperature 0℃~ 40℃,

Relative Humidity 10~80%, etc all complete.

Supply, installation, testing and commissiong of All-in-one design The three-

in-one design of 4K ultra HD camera, beam-forming microphone and full-

frequency loudspeaker reduces wiring and makes video communication

easy, 4K UHD Using 1/2.5 inch, 8.51M pixel high quality UHD CMOS sensor,

4K (3840x2160) @ 60fps ultra high resolution clear image, and downward

compatible with 1080P, 720P and other resolutions. Can meet the needs of

users for different video experiences, and can provide clear, real, smooth

and accurate communication, Wide FoV 120°wide field of view (110°

horizontal field of view), 5 times zoom, optical lens customized for the

conference scene, builtin electric head (horizontal and pitch ±15° motion

range), no need to worry about the camera position, participants can easily

enter the scene clearly, Beam Forming (BF) microphone is built in, with a

pickup distance of 6 meters. Low-distortion transverse beam-forming

algorithm can direct the microphone directly to the speaker, with better

sound, clearer communication, fuller and more authentic., Built-in audio 3A

algorithm (AEC/AGC/ANS), full duplex dialogue, can meet the

2 communication needs of different room structures, whether sitting at a 1 Nos 130900.00 130,900.00

conference table, sitting against the wall or standing, can have comfortable

Digitally signed by AMIT

conference table, sitting against the wall or standing, can have comfortable

experience for calling, Full frequency speaker Full frequency Hi-Fi

loudspeaker, professional acoustics design, reduce noise interference,

provide outstanding sound effect, Plug and play type Through plug and play

USB interface connect with the computer or business display screen, very

easy to use. Less wiring, convenient video communication, reduce the user's

learning cost, Built-in intelligent analysis algorithm, listening to the speaker

position, automatic framing of participants, automatic tracking of speakers,

switching the speaker screen, to ensure that the speaker is always clearly in

the picture, Rich interfaces Support HDMI 2.0 and USB 3.0 audio video

output simultaneously, Easy installation ,etc all complete.

Supply, installation , testing & commissioning of 15 meter HDMI cable etc

3 including conduiting,casing caping, chase cutting at site complete in all 1 Nos 4,500.00 4,500.00

Supply, installation , testing & commissioning of USB 3.0 Extention cable 10

4 meter etc including conduiting,casing caping, chase cutting at site complete 1 Nos 9000.00 9,000.00

Deputy CMD cabin 0.00

SITC of 43''4k LED TV diagonal size , resolution 3840*2160( 16:9),

bightness 700 nit,haze - non glare, active display size 941.84(H)*529.416(V),

Pixel pitch(mm)- 0.2451* 0.2451, color gamut 92%(DCI-P3,CIE1976),

operating system tizen 6.5, processor Cortex A72 1.7GHz, Quad-Core CPU

1 ,Storge (FDM) 16GB,Safety 60950-1 / 62368-1,input DP 1.2 (1), HDMI 2.0 1 Nos 56950.00 56,950.00

(3), USB 2.0 x 2, output Stereo mini jack ,EXTERNAL CONTROL

RS232C(in/out), RJ45 port , Speaker 10W 2ch, IP Rating ,IP5,Operation

Digitally signed by AMIT

Supply, installation, testing and commissioning of All-in-one design The three-

in-one design of 4K ultra HD camera, beam-forming microphone and full-

frequency loudspeaker reduces wiring and makes video communication

easy, 4K UHD Using 1/2.5 inch, 8.51M pixel high quality UHD CMOS sensor,

4K (3840x2160) @ 60fps ultra high resolution clear image, and downward

compatible with 1080P, 720P and other resolutions. Can meet the needs of

users for different video experiences, and can provide clear, real, smooth

and accurate communication, Wide FoV 120°wide field of view (110°

horizontal field of view), 5 times zoom, optical lens customized for the

conference scene, builtin electric head (horizontal and pitch ±15° motion

range), no need to worry about the camera position, participants can easily