WELCOME MAINTENANCE INCLUDING INTERNAL WIRING AND PERIODICAL SERVICES TO OFFICERs MD ACCN, JCOs MD ACCN, OTM ACCN IN BIKANER LINE AND RAIPUR LINE AT DAMANA UNDER GE JAMMU

Amount

B/R Portion: - Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of white wash on walls complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying one coat of white wash on ceiling complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying one coat of oil bound distemper as on ceiling complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying one coat of oil bound distemper complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of oil bound distemper over a coat of wall care putty as on wall complete all as specified and as directed.

Material and Labour for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and Labour for preparation of old wood and wood based surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and Labour for preparation of old plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of plastic emulsion paint over a coat of wall care putty as on wall complete all as specified and as directed.

Material and Labour for rendering 15mm thick in CM 1:4 with water proofing compound on fair faces of brick surface finished even and smooth without using extra cement etc. complete all as specified and as directed. (including all necessary scaffolding, lifting arrangement for external surfaces).

Material and Labour for rendering 10 mm thick in CM 1:6 on fair faces of concrete or brick surface finished even and smooth without using extra cement upto height of four storey building complete all as specified and as directed.

Material and Labour for rendering 5 mm thick in CM 1:3 on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including racking out joints, hacking for key, scrubbing down with water and removing unserviceable materials outside cantt area complete all as specified and as directed.

Material and Labour for preparation of newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and Labour for applying two coats of cement based paint including preparation of newly plastered surfaces complete all as specified and as directed.

Material and Labour for preparation of new plastered surfaces by scrapping down smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying two coats of oil bound distemper over a coat of wall care putty as on wall complete all as specified and as directed.

Taking down and refixing of shutters in same opening of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Dismantling floors, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceble tiles to store and rubbish off the premises complete all as specified and as directed.

Material and Labour for glazed ceramic coloured tiles, (Premier quality), of size 450 x 350 x 7 mm thick on vertical surfaces such as skirting, dados and risers to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in CM 1:4 complete all as specified and as directed. Note: - Design, shape and pattern of fixing of tiles shall be as directed by Engineer-in-Charge.

Material and Labour for colored non-skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in colored cement to match shade, pattern, laying etc of tiles, over and including 15 mm thick screed bed or bedding layers of cement mortar 1:6 complete all as specified and as directed at site.

Material and Labour for vitrified ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 Sqm in floors etc, set and jointed in neat cement slurry over 15mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and as directed.

Material and Labour for vitrified ceramic tiles 10mm thick (square / rectangular) light shade polished, area of each tiles not exceeding 0.36 Sqm on skirting, dado, set and jointed in neat cement slurry and pointed in white cement with pigment to match the surface over 10mm thick screed in CM 1:6 complete all as specified and as directed.

Material and Labour for granite 20mm thick (Pure black) (tabled, rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in colour cement (1:2) using marble dust with admixture of pigment to match with the shade of granite over and including 15mm thick screed bed in CM (1:4) edges of slab to be rounded from all sides (including cutting, wastage and polishing) complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing unserviceable material outside cantt area complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for PCC (1:2:4) type B-0 (using 12.5mm thick crushed stone aggregate) mixed with liquid water proofing compound and laid on RCC sunken slab as base layer for receiving top layer all as specified and as directed by Engineer-in-Charge.

Supply only liquid water proofing compound complete all as specified and as directed.

Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and as directed.

Supply and fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flush pipe and joints complete all as specified and as directed by Engineer-in-Charge.

Supply and fixing in repair vitreous china wash hand basin white flat back end of size 550 x 400mm including brackets, cutting for and pinning in ends for brackets, erecting stand complete including brass CP waste coupling and PVC 32mm bore waste pipe with chain and plug and porcelain stopper complete all as specified and directed.

Supply and fixing sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers or waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 100mm including waste pipe etc complete all as specified and as directed.

Supply and fixing stainless steel plate rack made out of 1mm thick sheet of size 750 x 600 x 250mm of size having partition as per sample kept in AGE B/R office and fixed with steel fasteners or steel screwed complete all as specified and as directed.

Supply and fixing toilet paper holder box type complete all as specified and as directed.

Dismantling plain or corrugated AC sheet in roof covering complete all as specified and as directed.

Supply and fixing 6mm thick asbestos cement corrugated or semi-corrugated sheets fixed with ‘J’ type or ‘L’ type cranked hook bolts with bitumen washer complete all as specified and directed.

Description all as per Ser Item No 34.00 here-in-before but except sheets complete all as specified and as directed.

Supply and fixing 6mm thick asbestos cement one piece plan angular ridge fixed with 'L' or 'J' type or cranked hook bolts complete all as specified and as directed.

Dismantling boarding any description fixed in any position with nail complete all as specified and as directed.

Supply and fixing 4mm thick of size 605 X 605 mm, white pre-premiered, self embossed, reinforced designer board for false ceiling conforming to IS-14862 and ISO-8336:1993 as per specification under mentioned: - (i) GI section frame work (POWDER COATED) for white, pre-premiered, self embossed, reinforced designer board consisting of perimeter wall angle 19mm X 19mm X 0.45mm, cross 'Tee' 28.6mm (web) X 24mm flange. 33mm thick powdered coated main tee 38 (Web) X 24mm flange 0.33mm thick. Wall angle screwed fixed to brick wall / partition wall / concrete / RCC with the help of nylon sleeves and screws @ 610 mm centre to centre, then suspending GI main 'Tee' in both directions by means of hangers with alignment @ 1220mm centre to centre to soffits. To from grid of 610 X 610mm cross Tee shall be provided @ 610mm centre to centre in both directions. Suitable provisions shall be made for fixing the recessed / surface mounting light fittings if any, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for pre-laminated particle board 18 / 19mm thick, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed in repair complete all as specified and as directed.

Supply and fixing 15mm bore tubes medium grade galvanized ISI marked with all fittings, short pieces and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.

Description same as per Ser Item No 40.00 here-in-before but except tubing complete all as specified and as directed.

Taking up or down steel tubing 15mm bore and connection complete all as specified and as directed.

Supply and fixing chromium plated doom 125mm dia with waste hole (minimum weight 40 grams) complete all as specified and as directed.

Supply and fixing hand shower (health faucet) (ABS body) with 1 metre long PVC tube and wall hook fixed to wall with and including CP brass screws etc complete all as specified and as directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Dismantling PVC water tank of capacity upto 1000 litres and removing from site complete all as specified and as directed.

Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and as directed in SSR Part- I.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4.0 Sqm each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish (without any extra cost to Govt) and removing from site complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Material and labour for factory made pressed steel frames of size 105 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Material and labour for factory made pressed steel frames of size 125 x 60mm made out of PBI sheet 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete including bottom of each chowkhat to be welded with 02 no's 25 x 25 x 3mm angle iron projecting 10cm one either side including one shop coat of red oxide chrome primer and including PCC (1:3:6) type C-0 in back filling of chowkhats and tarring back of chowkhats and holdfasts complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet and edges will be painted to match with printed sheet, reinforced with mild steel square tube, supplying and fixing in opening as per specification complete all as specified and as directed.

Supply and fixing for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and as directed.

Supply and fixing 30mm thick flush shutters, soild core construction, with particle board core and plywood face panels, both faces are covered with decorative face veenered with lipping / frame to match complete all as specified and directed by Engineer-in-Charge.

Supply and fixing second class hard wood, glazed and skelton shutter 35mm thick open, rebated and prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR 2020 Part-I Section 8.24 (b), supplied and fitted to chowkhats complete all as specified and as directed.

Supply and fixing mild steel butt hinges medium weight 100 mm long complete all as specified and as directed.

Supply and fixing box type steel windows / ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 Note:- The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20 X 5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs.

Material and Labour for cement concrete (1:3:6) type C-0 (using 12.5 mm graded crushed stone aggregate) filling in, pressed steel chowkhats, bed block for holdfast and the like complete all as specified and as directed.

Material and Labour for applying two coats of synthetic enamel paint on wooden surface over one coat of pink primer including preparation of new surface over 10cm width or girth complete all as specified and as directed.

Material and Labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described over 10 cm width or girth including preparation of surface complete all as specified and as directed.

Supply and fixing GI tubing 20 mm bore medium grade including all necessary fittings laid in floors or fixed in walls or ceilings complete all as specified and as directed.

Taking up or down steel tubing 20mm bore and connection complete all as specified and as directed.

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 15mm bore fixed in repair complete all as specified and as directed. (Minimum weight 210 grams).

Supply and fixing ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20mm bore fixed in repair complete all as specified and as directed. (Mimimum weight 210 grams).

Supply and fixing in repairs bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repairs bib taps, cast copper alloy fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.

Supply and fixing in repairs stop cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repairs stop cock, chromium plated fancy type cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 20mm dia bore complete all as specified and as directed.

Supply and fixing in repairs stop cock, chromium plated fancy type with long shank and cup (concealed type) cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified including cutting walls / tile and making good the disturbed surface complete all as specified and as directed.

Supply and fixing in repairs chromium plated angular stop cock, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.

Supply and fixing in repairs pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and as directed.

Material and Labour for repairing of old chromium plated bib taps, pillar taps, wash hand basin mixture, stop cock, angle valve, concealed stop cock and similar items by changing its brass phases and making it functional to the entire satisfaction of user and Engineer-in-Charge complete all as specified and as directed.

Supply and fixing waste fittings, brass, chromium plated with long screwed shanks and fly nuts of size 32mm complete all as specified and as directed.

Supply and fixing looking mirror of size 600mm x 450mm with PVC moulded frame and hard board back white colour complete all as specified and as directed.

Supply and fixing PVC connection 15mm bore and 450 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.

Supply and fixing PVC waste pipe 32mm bore complete all as specified and as directed.

Material and Labour repairing of PVC low level / high level cistern by changing its internal fitting including PVC flush pipe etc complete all as specified and as directed at site.

Cleaning of water storage tank completely by removing all scale dirt / dust of any description complete all as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity exceeding 250 litres and not exceeding 500 litres including dismantling and refixing if required complete all as specified and as directed.

Cleaning of water storage tank completely by removing all scale dirt / dust of any description complete all as directed at site and writing date of cleaning with synthetic enamel paint including all material and labour of capacity 1000 litres including dismantling and refixing if required complete all as specified and as directed.

Supply and fixing in repairs CP brass jet spray with flexible pipe not less than 90 cm long fixed to EWC suitable for 15mm bore complete all as specified and directed at site.

Supply and fixing in repairs PVC flushing cistern 10 litre capacity make should be engraved on the body including flushing pipe chormium plated 90 cm long, pair of bracket etc complete all as specified and as directed.

Supply and fixing in repairs tubular towel rail, 20mm dia, 'D' type 60cm long between flanges of brass chromium plated complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated shower rose with arm not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and as directed.

Supply and fixing 125 mm dia steel grating fixed in position complete all as specified and as directed.

Supply and fixing 125 mm dia steel grating with hole fixed in position complete all as specified and as directed.

Supply and fixing Aluminium door stopper 150mm for doors complete all as specified and as directed.

Supply and fixing in repairs Helical door spring of size 300 mm including welding to steel chowkhats complete all as specified and as directed at site.

Supply and fixing in repairs galvanised mild steel wire cloth 0.50 nominal dia of wire and average width of aperture 1.18mm including fixing with wooden beads / screws / nails in steel / wooden joinery complete all as specified and as directed.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from the wooden frames glazing with putty or fixed with wooden beads complete all as specified and as directed.

Supply and fixing figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane of thickness 3mm complete all as specified and as directed.

Supply and fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing in repairs Aluminium anodized, barrel tower bolt of extruded section, 150mm long complete all as specified and as directed.

Supply and fixing in repairs Aluminium anodized, barrel tower bolt of extruded section, 200mm long complete all as specified and as directed.

Supply and fixing in repairs Aluminium handle, cast type, anodized, 150mm size complete all as specified and as directed.

Supply and fixing butt hinges, extruded aluminium alloy with galvanized mild steel hinge pin, anodized, 75mm size complete all as specified and as directed.

Supply and fixing in repair floor door seal one metre long of mild steel body with fibre brushes complete all as specified and as directed.

Supply and fixing 15 mm dia bore in repairs brass CP mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed.

Supply and fixing in repair curtain rod chromium plated / PVC coated, mild steel, with fixing brackets, side ball stops, rollers, etc complete all as specified and as directed.

Supply and fixing hasp and staple 150mm long safety type aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, fixed in repair complete all as specified and as directed.

Material and labour for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass cement concrete, sub base of floor complete all as specified and as directed.

Supply and fixing chequered coloured cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in cement slurry in floors with grey pigment cement and pigments including and over 15mm thick screed bed or bedding layer of CM (1:4) set and jointed in neat cement slurry and pointed in white or colored cement to match the surface of tiles finish complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying one coat of white wash on old prepared surfaces of walls complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying one coat of cement based paint on old prepared surfaces of walls complete all as specified and as directed.

Material and Labour for preparation of old plastered or unplastered surfaces of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorscent salts and trading oil and greasy spots by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirts etc and applying two coats of cement based paint on old prepared surfaces of walls complete all as specified and as directed.

Material and Labour for rendering 10mm thick in CM 1:4 on fair faces of concrete surface as in ceiling finished even and smooth without using extra cement complete all as specified and directed.

Material and Labour for preparing plastered or unplastered new surfaces of walls and applying three coats of white wash complete all as specified and directed.

Complete removal of existing treatment of walls including cornices, pillasters by brooming down or steel wire smoke, root, moulds, moss and efflorescent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc and applying two coats of oil bound distemper on walls after applying a layer of wall putty to make surface even and smooth complete all as specified and directed.

Complete removal of existing treatment of external walls including cornices, pillasters by brooming down or steel wire smoke, root, mould, moss and efflorscent salts and trading oil and greasy spot by using suitable chemical and removing nails, making good holes with chalk whiting, filling cracks and brooming to remove all dirt etc, applying two coats of weather proof paint exterior grade over one coat of primer on walls, making good the depression etc with wall putty surface even and amooth including all scaffolding arrangement upto four storeyed building complete all as specified and directed.

Material and Labour for preparation of old plastered surfaces by scrapping down old treatment, smoke dust, mould, moss and efflorescent salt and removing oily and greasy spots etc and applying texture painting over a coat of wall putty as on wall complete all as specified and as directed.

Material and Labour for writing of building no or figures as per existing pattern (Block Roman, Itallic or Indian) not exceeding 30 cm high complete all as specified and directed.

E/M Portion: - Taking down old unserviceable copper / aluminium point wiring concealed / batten (light, fan, socket or power) complete, including fixture and fittings such as switches, sockets, ceiling roses, bell push, bell electric, lamp holder, bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden / iron, round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.

Material and Labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into existing concealed PVC rigid / steel conduit and into existing CI / pressed steel sunken / terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified and as directed. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clamps all as specified and as directed by Engineer-in-Charge.

Description same as per Ser Item No 116.00 here-in-before but for one 5 pin socket outlet 5 amps on the same board complete all as specified and as directed.

Description same as per Ser Item No 116.00 here-in-before but for one 5 pin socket outlet, 5 amps, independent complete all as specified and as directed.

Description same as per Ser Item No 116.00 here-in-before but for one 5 pin socket outlet, 15 Amps on independent board with cables 2.5 Sqmm size complete all as specified and as directed.

Description same as per Ser Item No 116.00 here-in-before but drawn through a new surface conduit PVC rigid non-metallic conduit 20 mm dia for socket outlet 5 amp independent board complete all as specified and as directed.

Description same as per Ser Item No 116.00 here-in-before but drawn through a new surface conduit PVC rigid non-metallic conduit 20 mm dia for socket outlet 15 amp independent board complete all as specified and as directed.

Material and Labour for point wiring for one light / fan / call bell point controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 Sqmm copper conductor multistranded FRLS, PVC insulated (unsheathed) drawn into and including new concealed PVC rigid / 1.8mm wall thickness ISI marked including pressed steel sunken / terminal boxes with existing colour terminated boxes of modular metal flush boxes of any way i.e. (1 to 8 way as per site requirement) for mounting switches, sockets, fan regulators etc complete all as specified and as directed for the following: - Note: - Suitable module white cover sheets with frame as specified to be provided in replacement to MS / Galvanised sunken boxes and shall be measured and paid separately as per relevant item. Note: - (a) Wiring shall be done by using proper colour coding. (b) Earth wire shall be of green colour. (c) On RCC roof / ceiling PVC conduit shall be provided on surface with proper fixing clamps all as directed by Engineer-in-Charge.

Description same as per Ser Item No 122.00 here-in-before but for 5 Amp socket outlet on same board complete all as specified and as directed.

Description same as per Ser Item No 122.00 here-in-before but for socket outlet 5 Amps independent board complete all as specified and as directed by Engineer-in-Charge.

Description same as per Ser Item No 122.00 here-in-before but for one 6 pin socket outlet 15 Amps on independent board with cables 2.5 sqmm size complete all as specified and as directed.

Supply and fixing in replacement modular switch 1 way 6 A,1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular switch 1 way 16 A, 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement socket 6A / 16A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement fan step regulator, 120W 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 1/2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 3 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 4 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 6 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular metal flush box 8 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular white cover plate with frame 1 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular white cover plate with frame 2 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular white cover plate with frame 3 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular white cover plate with frame 4 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular white cover plate with frame 6 module, 240 volts ISI marked complete all as specified and directed.

Supply and fixing in replacement modular white cover plate with frame 8 module, 240 volts ISI marked complete all as specified and directed.

Material and Labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 Volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and Labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 8 way 240 Volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Material and Labour for replacement of distribution board sheet steel powder coated for MCB with copper bus bar and neutral link earthing stud SPN 6 way 240 Volts double door complete all as specified and as directed by Engineer-in-Charge. Note: - Distribution board and MCB's should be of same make.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 Amp, in the MCB DB complete with connection, testing and commissioning all as specified and as directed.

Supply and fixing in replacement 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 Amp, in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing SPN 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing SPN 40 to 63 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection, testing and commissioning complete all as specified and as directed.

Supply and fixing in replacement for switch piano, flush type single pole one way 5Amp, 240 volts complete all as specified and as directed.

Supply and fixing in replacement socket outlet 2 in 1, 3 pin, 5 A complete all as specified and as directed.

Supply and fixing in replacement switch socket outlet combined 5 pin 5 amp flush type, 240 volts complete all as specified and as directed.

Supply and fixing in replacement switch socket outlet combined 2 in 1, 3 pin 5 amp and 15 amp flush type, 240 Volts complete all as specified and as directed.

Supply and fixing for bell push, flush type single pole, 5 Amp, 240 Volts complete all as specified and as directed.

Supply and fixing for ceiling rose 3 terminal surface type complete all as specified and as directed.

Material and Labour in replacement for Lamp holder, PVC / Polycarbonate type with back plate suitable for batten fittings complete all as specified and as directed.

Material and Labour in replacement self ballast LED retrofit lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K complete all as specified and as directed.

Supply and fixing in replacement LED lights fitting 1 x 20W, 220V, AC decorative box type complete with LED tube rod 20 watts driver, holder and power factor >0.95, 100 Lumen/Watt, 6500 K cool day type conforming to ISI including LED tube light connecting up with three core flexible copper conductor cable and flexible pipe of suitable size from ceiling rose complete (4' ft long) with LED rod 20 watt, 230 Volts 50 Hz complete all as specified and as directed.

Supply and fixing in replacement LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing in replacement wall mounted decorative type luminaries IP-65 with diffuser 10 watt, 230 Volts LED type complete with 10 watt LED bulb all as specified and as directed Engineer-in-Charge. Note: - The cost of LED Lamp, 10 watt included in the quoted rate.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders and LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing in replacement stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required complete all as specified and as directed.

Supply and fixing in replacement calling bell Ding Dong / buzzer AC 230 Volts, single pole complete all as specified and as directed.

Material and Labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 6 Sqmm for phase and neutral and one run of 4.0 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and Labour in replacement for sub main wiring with proper colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 2 run 4 Sqmm for phase and neutral and one run of 2.5 Sqmm for earth wire unsheathed, multistranded, copper conductor FRLS, drawn through the new rigid PVC concealed conduit fixed on wall. Two runs of cable for phase / neutral and one run of cable for earth will be measured and paid as one unit length complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and Labour in replacement for wiring for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1 run 2.5 Sqmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and Labour in replacement for wiring for circuit with proper existing colour coding, insulated, unsheathed, multistranded, copper conductor FRLS, cable of 1 run 1.5 Sqmm for phase, drawn through the existing rigid PVC concealed conduit fixed on wall including taking down existing unserviceable wiring complete all as specified and as directed. Note: - Wiring shall be done in proper colour coding.

Material and Labour for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick buried directly in ground earth (in vertical) earth pit not less than 2.25 metre deep below normal ground level with top edge of the earth plate not less than 1.5 metre below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC (1:2:4) type B-1 pre-cast RCC cover slab using reinforcement with suitable handle made of round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion complete all as specified and as directed.

Supply and fixing in replacement plug top 15 Amps complete all as specified and as directed.

Supply and fixing in replacement of vertical distribution board (TP&N) 4 way double door suitable for and including MCCB 125 Amp 16 KA four pole as incomer and outgoing MCB's and should be IP-43 protected with copper bus bars, neutral links, earthing bar all as specified and directed including taking down old unserviceable DB / MCB any type. Note: - (i) Rate includes MCCB four pole 125 Amp, 16 KA, 415 volts with adjustable thermal settings. (ii) MCB's shall be measured and paid separately. (iii) TPN DB and MCCB should be of same make.

Material and labour for decorative post top lantern LED 25 / 30 watt, colour NW light for 360° indirect light with IP-65 protection, resistant to impact and corrosion, glare-free and better uniformity including fixing of the light on the existing pipe arrangement and necessary wiring to light from nearest junction box complete all as specified and as directed.

Taking down and strip opening to geyser of any make and capacity 25 / 35 / 50 litres including disconnection of all water pipe connection and taking out water inlet / outlet assembly, removing glass wool, the inner tank, descaling the assembly and tank, detecting the leakage, welding / bracing the defected part, repacking the glass wool and refixing the same after making it functional including replacement of worn out nuts, bolts, washer etc complete all as specified and as directed. Note: - Cost of material for providing new items shall be measured under relevant items of Sch 'A'.

Supply only water inlet and outlet geyser assembly of existing make as required at site with rubber gasket suitable for geyser of 25 / 35 litres capacity electric driven water storage heater with provision of housing for thermostat assembly, heating element, fixing arrangement nuts, bolts and washers etc complete all as specified and as directed.

Supply only water inlet and outlet assembly of existing make as required at site with rubber gasket suitable for geyser of 50 litres capacity electric driven water storage heater with provision of housing for thermostat assembly, heating element, fixing arrangement nuts, bolts and washers etc complete all as specified and as directed.

Supply only thermostat, switch electric water heater storage type of capacity 25 / 50 litre, 230 Volts of existing make of geyser complete all as specified and as directed.

Supply only heating element with triangular base / round base, single phase, 230 Volt, capacity 2 KW of existing make complete all as specified and as directed.

Supply only heating element with triangular / round base, single phase, 230 Volt, capacity 1.5 KW of existing make complete all as specified and as directed.

Supply only heavy duty PVC connection (For Hot water) nylon threaded 450mm large (18'') 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and as directed.

Supply only heavy duty PVC connection (For Cold water) nylon threaded 450mm large (18'') 15mm bore including brass nuts, rubber washers complete on both ends complete all as specified and as directed.

Supply only indicator lamps round / rectangular type 230 Volt AC suitable for geyser of any capacity including providing electric connections complete all as specified and as directed.

Supply only water storage inner tank of stainless steel heavy duty conforming to ISI 25 / 35 litres capacity geyser, with provision for fixing 15mm dia galvanized air release valve complete all as specified and as directed.

Supply only water storage inner tank of stainless steel heavy duty conforming to ISI 50 litres capacity geyser, with provision for fixing 15mm dia galvanized air release valve complete all as specified and as directed.

NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - All plumbing works shall be laid or fixed as to be completely air tight or water tight as specified and Contractor will furnish its certificates towards air / water tight before completion of work under the Contract. NOTE NO 4: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.

bushan kumar

Shri Karshni Builders

Bidder Name

Shri Karshni Builders

M/S VERMA ENTERPRISES

bushan kumar