PROVN OF THREE GUEST SUITS, FOUR TOILETS, FALSE CEILING AND HARD STANDING AT JHANSI CANTT UNDER AGE B/R-I OF GE JHANSI

Amount

Surface dressing not exc 15cm deep, complete all as specified and directed.

Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in hard and dence soil, complete all as specified and directed.

Excavating in trenches not exceeding 1.50m wide and not exceeding 1.50m depth for foundation, drain, laying of cables/pipes/poles etc and for wells, cesspits, manhole, pier hole etc not exc 10 sqm on plan and not exc 1.50m in depth and getting out in any type of soil, complete all as specified and directed.

All as per Srl item No 03 here-in-above but not exc 1.5 m wide and exc 1.5 m upto 3mtr in depth for foundation, manholes etc and not exc 10 sqm on plan and not exc 3.0 m in depth and getting out in hard/dense soil, complete all as specified and directed.

Returning, filling with excavated soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point, complete all as specified and directed.

Filling under floor and spreading in layers including well ramming ,watering as required, complete all as specified and directed.

M&L Hardcore (Broken stone) of guage not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations fillings & mass concrete, complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in foundations fillings & mass concrete in area drain, complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) (using 20mm graded stone aggregate) as in foundations incl rafts, footings, foundation beams; plinth beams; bases for columns etc; basement slabs, under-reamed piles and mass concrete walls, beams and columns etc, complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts etc, complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) (using 20mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc, complete all as specified and directed.

M&L for RCC, M-25 (Design Mix) (using 20mm graded stone aggregate) as in chajjas, complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface, complete all as specified and directed.

Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions, footing etc, complete all as specified and directed.

Use and waste form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, cantilevers, shelves incl supports, overhangs etc, complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exc 200mm thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of form work to edges of concrete flats, treads, breaks in floor, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed.

Use and waste of form work to soffits of chajjas and similar work including edges complete for rough finished surface, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

All as per item No 23 here-in-before but mild steel TMT bars of 5mm dia and over upto and incl 10mm dia as in stirrups, spacers and binders.

M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan exc 6m mean radius built in cm (1:6), complete all as specified and directed.

M&L for brick work with fly ash lime bricks (FALB) conforming to IS 12894, old size brick, straight or curved on plan to any radius in half brick thick wall built in CM (1:4), complete all as specified and directed.

M&L for moorum / red bajri, filling in floors or pavings, laid in floors not exc 15cm thick, spread, levelled and rammed incl watering, complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate), as in sub base complete all as specified and directed.

M&L 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate), complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:3) on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces of wall of area drain, finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering in two layers consist of 10 mm thick on fair faces of brick work or concrete surfaces for rough finish in cement mortar 1:6 and 5mm thick on fair faces of plastered surfaces in cement mortar 1:4 with water proofing compound (on top layer only), finished fair and even without using extra cement, complete all as specified and as directed. Note : The water proofing compound shall be measured and paid seprately unde respective items only.

M&L for joint free, ceramic coloured tiles of size 600x600mm, 8 to 10 mm thick (square/rectangular), in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6), complete all as specified and as directed. Make : Kajaria / Nitco / Jhonson / Orient / Somany.

All as per Srl item No 34 here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4, complete all as directed.

M&L for semi skid ceramic color tiles of size 300x300mm, 7 to 8 mm thick (square / rectangular) as in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. Make : Kajaria / Nitco / Jhonson / Orient / Somany.

M&L for ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as directed. Make - Kajaria / Nittco / Jhonson / Somany / Orient

M&L 16-18mm thick granite slab, tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base, complete all as specified and directed.

M&L for factory made , chequered cement concrete tiles of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 25mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment, made of PVC moulded (or rubber mould) with vibrating system laid over 50 mm thick sand cushion, with and incl CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate

M&L for Stone sett flooring with stone setts of size 200 to 250mm long, 150 to 200mm wide and 150mm deep and sides dressed, bedded with 15mm thick Screed bed in cement mortar 1:3, joints 20mm thick; grouted in cement mortar 1:2 with an admixture of metallic floor hardner 5% by weight of cement and struck flush, complete all as specified and directed.

M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping, edge stops etc, complete all as specified and directed.

M&L for preparation of new plastered surface of internal walls and applying two coats of oil bound distemper, over a coat of primer, over and incl a layer of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash, complete all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying 3 coat of white wash, complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coat of cement based paint over and incl one coat of exterior grade cement based primer, complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:3 mixed with liquid water proofing solution @ 150ml in 50 Kg of Cement by weight, on roof surfaces when concrete become green, finished even and smooth without using extra cement, complete all as specified and directed. Note : The water proofing compound shall be measured and paid seprately unde respective items only.

M&L for water proofing treatment to roof slab with APP based modified polymeric membrane having thickness 3 mm weight not less than 3kg/Sqm with 100mm overlap laid as per manuacturer's instructions and taking down exsiting water proofing treatment, complete all as specified and directed by Engineer-in-Charge with following course of description, mentioned below :- (a) 1st coat applying bitumen primer confirming to IS-3384-1965 @ 0.40 Kg/Sqm to be applied on prepared roof surface till the surface is properly impregnated. (b) 2nd coat of bonding material using blown type bitumen conforming to IS-702 of grade 85/25 @ 1.20 Kg/Sqm (c) 3rd course of. laying of APP Based modified membrane described herein before with 100mm overlap in longitudinal direction and 100mm in transverse direction, all joints and changes in all direction should be covered covered with cement mortar (1:3) mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane (d) Forth course of bounding material using blown grade bitumen 85/25 conforming to IS-702 @ 1.20 Kg Per Sqm. (e) Applying a coat of bituminious aluminium paint @ 0.20 Kg Per Sqm.

Supply only integral liquid water proofing compound, mixed in CM as per manufacturer instruction, complete all as directed. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

M&L for 125x60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete as specifed and directed.

S&F of 35mm thick factory made modular designer flush doors, solid core construction, with block board core and prelamination on both sides, complete all as specified and directed.

M&L for 30mm thick second class hard wood glazed & skeleton shutter for doors (fully glazed or gauged) open rebated & prepared to receive glass, gauge etc (with sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section–8, clause 8.24(a) and conforming to IS-1003 Part-I & II, complete all as specified.

M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed block for hold fast & filling in pressed steel door frame, complete all as specified and directed.

S&F of Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm wood coloured PVC sheet and edges, reinforced with MS square tube, as specified in SSR Part-II 2010 (Section 8), complete all as directed. Make : Rajshree / Sintex

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed. Make : Rajshree / Sintex

S&F of 100mm butt hinges medium weight cold rolled mild steel ISI marked and fixed with mild steel wood screws or welded to angle frame, complete all as specified and directed.

S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21 anodized complete all specified and directed

S&F of aluminium alloy anodized sliding door bolt 200mm length with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, ISI Marked, complete all specified and directed. (Make : Ashish, Classic)

S&F of 200mm long barrel tower bolt aluminum anodized extruded section, ISI marked, fixed with cadmium plated screws, complete all as specified and directed. (Make : Ashish, Classic)

S&F of 150mm long barrel tower bolt aluminum anodized extruded section, ISI marked, fixed with cadmium plated screws, complete all as specified and directed. (Make : Ashish, Classic)

S&F of 150mm aluminum handle cast type anodized, ISI marked, complete all specified and directed. (Make : Ashish, Classic)

S&F of 150 mm door stopper of aluminium body with rubber shoe and tongue anodized, with rubber shoe fixed in floor, ISI marked, complete all specified and directed. (Make : Ashish, Classic)

M&L for box type steel ventilator with 80x40x1.25mm MS tubular frame partly gauged with top hung shutter with and incl grill using 12mm square bars @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars dovetailed and welded complete all as specified as directed. Note:- (a) The Glass / gauze shell be measured and paid separately. (b) Top hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

M&L for box type steel window with 80x40x1.25 mm MS tubular frame with side hung shutters (double shutter for glass and gauze) without sash bars jointed together with and incl grill using 12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing bars doweled and welded, complete all as specified as directed. Note :- (a) The Glass / gauze shell be measured and paid separately. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 0.3mm thick.

S&F of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed.

M&L for stainless steel wire cloth 0.36 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with tinned tacks of stainless steel wire staples to steel shutters or fixed with wooden beads to wooden joinery, complete all as specified and directed.

M&L for preparation of new steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer, complete all as specified and directed

M&L for preparation of new wood and wooden surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over and including a coat of pink primer, complete all as specified and directed.

S&F of exposed frame false ceiling system with GI powder coated grid consisting of main T runner 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 2.5mm dia GI rod from roof / Slab incl wall/perimeter runner/channel of 15 mm size with interlocking arrangement, as required, for framing grid of suitable module size with and incl 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size approx 595x595mm, duly fixed in ceiling frame work, complete all as specified and directed. Make : Gyproc / V-Board / Everest

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 1000 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

S&F of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 15 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for medium grade galvanised steel water tubing with and incl all fittings and fixtures, fixed to wall or laid in floors for 20 mm bore, concealed or exposed, complete all as specified and directed. Make : Jindal / Prakash Surya/ Tata

M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed.

S&F of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size, complete all as specified and directed. Make : Hindware / Cera / Jaquar / Parryware.

M&L for 1st quality vitreous china ware European type WC with "P" or "S" type traps and same make plastic seat cover of white colour including flush pipe, fixing bolts etc and making good of the wall & floor surface, complete all as directed. Make : Hindware / Cera / Jaquar / Parryware.

S&F of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed. Make : Hindware / Cera / Parryware / Prayag

S&F of wash basin mixer, pillar tap with out popup waste system made of cast copper alloy, chromium plated fancy type, suitable for 15 mm dia bore pipe, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of Stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swivel type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. Make : Hindware / Cera / Parryware / Prayag.

S&F SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all as directed. Make : Camry / Hindware / Cera / Parryware / Prayag / Pearl

S&F of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of towel rail 600 mm long and wall bracket made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of handshower (health faucet) with 8 mm dia, 1.0 mtr long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of stainless steel Peg set having six hooks, fixed with steel screws to wall, complete all as directed.

S&F of toilet roll holder with flap made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of towel ring round/square shape of suitable size made of cast copper alloy, chromium plated, complete all as directed. Make : Hindware / Cera / Parryware / Prayag.

S&F of PVC made multipurpose cabinet with front openable door of overall size 350 x 450 mm, complete all as specified and directed. Make - Prayag / Polytuff / Commander / Pearl

S&F of stainless steel sink, 1.00 mm thick for kitchen, with and incl 40mm dia CP waste coupling, waste pipe of 750mm long, washers, cantilever brackets, connecting union etc overall approx size 550 mm x 450 mm with approx bowl size of 500 mm x 375 mm x 200 mm etc, complete all as directed. Make : Nirali / Prayag / Blue Star / Pearl

M&L for stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with necessary FI clamps, complete all as specified and directed.

S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall with necessary FI clamps, complete all as specified and directed.

S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, complete all as directed.

S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal, complete all as specified and directed.

S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed.

S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed.

S&F PVC Gully trap of 125/110 mm outlet, jointing to waste pipe with cement solvent, complete all as specified and directed.

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path, laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and as directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and as directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and as directed.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for drain pipes of 150 mm internal dia size, complete all as specified and directed.

M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in coping, surface channels, benchings, etc of manholes, suacer drain, haunching, copings and the like including weathering, slightly rounded or chamfered angles and throating, finished fair and even, with and including neccessary form work, complete all as specified and directed.

M&L for precast manhole covers with plain faces using RCC 1:2:4 type B1 and set in CM 1:4 including formwork, complete all as specified and directed.

Supplying laying and testing of SGSW (Salt glazed stoneware) drain pipe of 150 mm internal dia size, grade ‘A’ (ISI Marked), laid in trenches to level / gradient, jointed in CM 1:1 complete with collar and accessories (all as per manufacturer instructions), complete all as specified and directed.

Extra for forming fair finished channel or drain 30cm girth (inner girth) in cement concrete using extra cement incl forms, moulds, stopped end, etc., complete all as specified and directed.

M&L for 15mm thick rendering in CM 1:4 on fair face of brick work or concrete surfaces with water proofing compound, finished fair and even without using extra cement, complete all as specified and as directed. Note : The water proofing compound shall be measured and paid seprately unde respective items only.

S&F framed bracket of angle 25x25x4mm including welding angles as necessary gusset plate riveting etc. not exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel'), complete all as specified and directed.

M&L for MS work such as rungs, handles to manholes etc, complete all as specified and directed.

Cutting into existing manholes, bricks wall for connecting new SGSW drain pipe/bend/Tee of 150 mm internal dia and making good to pipe or wall leak proof and rendering cutting out existing benching for and forming branch channels (1/2 round or 3/4 section) manholes and filling cut of walls by cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate smooth finish and reforming benching as required, complete all as specified and directed.

M&L for construction of Septic tank including excavation in any type of soil, foundation in PCC 1:2:4 type B2, brick work in CM 1:4, RCC M25 (with and including reinforcement), Slab covers including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame, Vent pipe shaft and sludge chambers etc, complete for 50 users, all as specified and shown in drawing No CEBZ/TD/76/2011 Sheet 1/2 & 2/2. Note :- 1. The Reinforcement shall be used 10 mm dia 150 mm c/c in main bar and distribution bars. 2. The cost of all kind of earth work, brick masonry work, plastering, coping, RCC slab, reinforcement, form work etc is deemed to be included in quoted rate only.

M&L for construction of soakage wells, with and incl excavation in any type of soil, foundation in PCC 1:3:6 type C2, walls of Honey combed masonry and solid in M-25 concrete, including intercepting chamber, screen chamber made of Brick masonry work in CM 1:4, RCC cover slab in M-25 (with and incl reinforcement), Filling with brick bats, complete of size 2.4 Mtr dia X 3.00 Mtr deep (effective depth), complete all as specified and directed. (Refer and read TD Drg No. CEBZ/TD/76/2011 SHEET 1/2 and 2/2). Note :- 1. The Reinforcement shall be used 10 mm dia 150 mm c/c in main bar and distribution bars. 2. The cost of all kind of earth work, brick masonry work, plastering, coping, RCC slab, reinforcement, form work etc is deemed to be included in quoted rate only.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.

M&L for Point wiring with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories / junction boxes / inspection covers etc of suitable size but not less than 20mm, duly concealed in wall / floor etc including provision of pressed steel terminal box of thickness not less than 18 SWG, with earth dolly of suitable size, duly concealed in wall and covered with 3 mm thick phenolic laminated hylam sheet fixed with GI screws for mounting switches, sockets, fan regulator etc, with and incl cutting chasing and making good of wall surface, complete all as specified and directed for the following points :- Make of Conduit : AKG/ Atul/ Kalinga/Precision/Modi; Make of Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI Note : The cost of MS sunken box with 3 mm thick bakelite, laminated hylem sheet top cover is deemed to be included in quoted rate.

One light / fan / bell / buzzer / exhaust fan point controlled by 01 no, 5 Amps one way switch.

One socket outlet 3 pin, 5 Amps on same board, controlled by 01 no, 5 Amps one way switch.

One socket outlet 3 pin, 5 Amps on independent board, controlled by 01 no, 5 Amps one way switch.

All as per srl item No. 127 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F of Switch piano type, single pole, one way, 5 amps, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Switch piano type, single pole, one way, 15 amps, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Socket, 6 pin, 5/15 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of electronic fan regulator, step type, socket size, 230 volts and making all necessary connections, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Bell push switch, single pole, one way, 5 Amps, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of electric bell of DINGDONG type, 6 Amps, 240 volts, single pole and making all necessary connections, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Lamp holder, angular type, bakelite body, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of Ceiling rose, three terminals, bakelite body, 230 volts, complete all as specified and directed. Make : Havells (Rio) / SSK / Goldmedal / GM

S&F of 7 W White LED retrofit lamp B-22 holder base with polycarbonate diffuser and heat sink, complete all as specified and directed. Make : Havells / Bajaj / Wipro / Philips /Osram

M&L for circuit / submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable, duly drawn through & including concealed medium grade, ISI marked, non metallic PVC conduit of 20 mm dia size with and incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed wall surface, complete all as specified and directed. Make of Conduit : AKG/ Atul/ Kalinga/Precision/Modi; Make of Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI Note : Three run of 6.0 Sqmm wire and PVC conduit shall be measured as one unit length.

M&L for circuit / submain wiring alongwith earth wire 2 runs x 4 sqmm + 1 run x 4 sqmm with FRLS insulated copper conductor, single core cable, duly drawn through & including concealed medium grade, ISI marked, non metallic PVC conduit of 20 mm dia size with and incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed wall surface, complete all as specified and directed. Make of Conduit : AKG/ Atul/ Kalinga/Precision/Modi; Make of Wire : Havells/ Polycab/ Finolex /RPG / V-GUARD /KEI Note : Three run of 4.0 Sqmm wire and PVC conduit shall be measured as one unit length.

S&F of surface mounting LED tube light fitting, box type with CRCA sheet steel powder coated body pre-wired suitable for and including of 1x20/22Watt (4 feet) retrofit LED tube rod having PC body and connecting up with twisted three core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting, complete all as specified and directed. Make : Havells / Bajaj / Wipro / Philips /Osram Note : The cost of retrofit type 20/22 Watt LED tube rod is deemed to be included in the quoted rate.

S&F of LED batten 9W/10W (2 Feet) complete with polycarbonate diffuser and built in with electronic driver including connecting up with twin core twisted flexible copper conductor form ceiling rose to connector of fitting complete all as specified and directed. Make : Havells / Bajaj / Wipro / Philips /Osram

S&F of recessed mounted LED light fitting of 2' x 2' size, suitable for grid false ceiling, 36/34 Watt, white light, metal body with white colour outer finish and polycarbonate diffuser with and incl LED driver, spring loaded clips for easy mounting and making all electric connections with and incl three core, PVC insulated, PVC sheathed flexible copper cable of 0.5 Sqmm size, complete all as specified and directed. Make: Philips / Havells / Wipro / Bajaj / Osram

S&F of bulk head fittings complete with deep drawn metal body duly powder coated with glass cover with and incl retrofit type LED Bulb of 10 Watt, complete with fixing on wall, complete all as specified and directed. Make : Havells / Wipro / Bajaj / Philips

S&F of LED street light luminaire, 15 Watt, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 65, with toughened glass cover and integral control gear etc, fixing on wall with & incl GI pipe 25mm dia light grade and clamps, complete all as specified and directed. Make : Havells /CG / Wipro / C&S / Polycab

S&F of ceiling fan, 1200mm sweap size, energy efficient, 50W / 52W power cosumption, 370 RPM, 100% copper winding motor, double bearing, with and including down rod, canopy (02 Nos), GI fan clamp with rubber bush, GI nuts, bolts and split pins etc (without regulator) and connecting up with 3 core x 0.5 sqmm flexible copper conductor cable from ceiling rose to connector of fan, complete all as specified and directed. Make : Crompton / Havells / Usha / Bajaj

S&F of exhaust fan of 300 mm sweep size with 04 Nos blade leafs, 70 W power consumption, 1300 to 1400 RPM, 100 % copper winding, heavy duty type, double ball bearing complete with and incl self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230 volts single phase, 50 Hz, AC supply and fixed by using 4 Nos 50 mm long MS fasteners, nuts & washers and making all electric connection with three core PVC insulated, PVC sheathed copper conductor flexible cable of 0.5 Sqmm size, complete all as specified and directed. Note : 1. The cost of making hole in the existing wall and making good the disturbed surface of wall/ ceiling etc as required is deemed to be included in the quoted rate. 2. Make : Havells / CG / Bjaja / Usha / Almonard.

S&F of ventilating fan with plastic body with louvers, 250mm sweep, single phase, 230 volts, 50 Hz. complete all as specified and directed. Make : Bajaj / Havells / Usha / Crompton

Supply, installation & testing of Electric Water Heater storage type, vertical type, 25 Liters capacity, 5 Star rated, with heating element, PUF insulation, multifunction safety valve, adjustable knob for temparature setting and mild steel inner tank and sheet steel outer body suitable for operating on 230V, 50 Hz, single phase AC supply and mounting on wall with suitable size & No. of anchor bolts complete all as specified and directed. Make : Racold/ Venus / Usha / Bajaj

S&F of modular MCB protected plug and socket board in sheet steel enclosure with 20A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting and chasing of wall surfaces for flush mounting of socket board and making good of wall surface, complete all as specified and directed. Make : Indo Asian / L&T / Havells

S&F of MCB distribution board, TPN, 4 way 415 Volt, made out of sheet steel, powder coated enclosure, double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting & chasing of wall surfaces for flush mounting of DB and making good of wall surface, complete all as specified and directed. Note : The MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

S&F of MCB distribution board, SPN, 8 way 230 Volt, made out of sheet steel, powder coated enclosure, double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting & chasing of wall surfaces for flush mounting of DB and making good of wall surface, complete all as specified and directed. Note : The MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

S&F of MCB distribution board, SPN, 4 way 230 Volt, made out of sheet steel, powder coated enclosure, double door type with IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting & chasing of wall surfaces for flush mounting of DB and making good of wall surface, complete all as specified and directed. Note : The MCBs shall be measured and paid separetely. Make : Indo Asian / L&T / Havells

S&F of MCB, C Curve type, 10 kA, 63 Amp, TPN with over load and short circuit protection, complete all as directed. Make : Indo Asian / L&T / Havells

S&F of MCB, C Curve type, 10 kA, 40 Amp, SP with over load and short circuit protection, complete all as directed. Make : Indo Asian / L&T / Havells

S&F of MCB, C Curve type, 10 kA, 40 Amp, SPN with over load and short circuit protection, complete all as directed. Make : Indo Asian / L&T / Havells

S&F of MCB, C Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed. Make : Indo Asian / L&T / Havells

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 16 Sqmm 4 core size, 1100 volts grade confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including making connection on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc, complete all as specified and directed. Make : Havells /Polycab /Univarsal/Gloster/Asian Cable/RPG Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and protection cover etc will be measured and paid for separately under respective items.

Supply, laying, testing and commissioning of LT UG cable, XLPE insulated, PVC sheathed, galvanized steel strip armoured electric power cable with stranded aluminium conductor, 1100 volts grade of size 10.0 Sqmm 2.0 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as specified and directed. Make : Havells /Polycab /Univarsal/Gloster/Asian Cable/RPG Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. The excavation, earth work, sand cushioning and protection cover etc will be measured and paid for separately under respective items.

M&L for high density polyethylene pipes (HDPE) of pressure of 50mm dia size, rating 6 kgf/cm2, ISI marked, laid in trenches for cable protection, complete all as specified and directed.

M&L for earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade, GI funnel with 20mm dia watering pipe, earthing connected to distribution board / earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion, complete all as specified and directed. Note : The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete PCC 1:3:6, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with 20mm dia watering pipe, wire mesh, protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II.

Taking down ceiling fan of any size carefully, sealing cable end, dismantling blades and removing fan and blades for servicing including supply and replacing bearings/bushings, capacitor and terminal connector including capacitor holder suitable for any model of existing fan, painting of ceiling fans complete with one coat of synthetic enamel paint by spraying including filling cavities with filler, after cleaning all dust etc and hanging ceiling fan in its existing or new location and connecting up including provision of 3 Core flexible copper conductor cable 0.5 sqmm from ceiling rose or connector to fan and testing for satisfactory functioning, complete all as specified and directed.

Taking down carefully smoke detectors and its connected items such as wiring with PVC conduit of any size clams etc. from existing location and refixing in existing / new location, complete all as specified and directed.

M&L for GI water tubing 25 mm dia nominal bore, medium grade, ISI marked, with and including all fittings i.e. bend, tee, elbow, reduce, union etc, laid in trenches, complete as specified and directed. Make : Jindal / TATA / Prakash Surya / Ravindra Note : 1. The excavation & earthwork shall be measured & paid for separately. 2. The cost of all type of GI fitting i.e. bend, tee, elbow, reduce, union etc is deemed to be included in quoted rates.

S&F of Gun metal globe or Gate valves with ironwheel head, screwed both ends for iron pipe of 25 mm dia bore, complete all as specified and directed. Make - Prayag / Leader / Prince / Sant Valves

Cutting and screwing of existing steel tubing for alterations or additions of size 40 or 50 mm done in position without taking down and inserting tee branch connection, complete all specified and directed. (Each cut measured).

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) of size 40 or 50 mm done in position without taking down, complete all specified and directed.

M/s Jagdish Chandra Arora

M/S Kesav Dev Agarwal

A K ENTERPRISES

S GOURAV PRAKASH ENTERPRISES

M/s P L Dixit

HARNAM SINGH ANIL SINGH

RAM SARAN SAHU