REPAIR OF CHARPOY GI PIPE WITH PLYTOP, CONVERSION OF CHARPOY GI NEVWAR PLYTOP, STEEL AND WOODEN FURNITURE

Amount

Chair dinning cushioned (TP) Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as directed by Engineer-in-Charge.

Supply and fixing of top rail made of teak wood/ hard wood complete all as specified

Supply and fixing of rails of stiffeners made of teak wood/ hard wood complete all as specified

Supply and fixing of rails of front legs made of teak wood/ hard wood complete all as specified

Supply and fixing of rails of rear legs made of teak wood/ hard wood complete all as specified

Supply and fixing seat made of 12mm commercial plywood & 50mm thick synthetic foam of 32 density covered with tapestry cover (cost not less than Rs. 250/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as specified and directed. Make of Foam : Sleep Well/Kurolon/ Sweet Dream.

Material and labour for polishing of chair dining with one coat of french polish on old surface and two coats of French polish on new surface as directed by Engineer-in-Charge

Peg Table Material and labour for providing leg of sheesham wood complete of table peg and also dismantling & removing of old unserviceable parts from the frame complete all as specified and directed

All as per Srl Item No. 2.00 here-in-before but front/ back/ side rail of sheesham wood

All as per Srl Item No. 2.00 here-in-before but table top of size 600mm x 400mm made out of 18mm thick pre-laminated particle board exterior grade melamine faced, ISI marked

Polish of old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

Charpoy GI pipe with ply top (TP) Material and labour in repair/ replacement of the following component of charpoy GI pipe with ply top complete all as specified and directed

Removing of old unserviceable/ broken top from charpoy GI pipe & removing of long rails and short rails from charpoy and re-threading of long rails/ short rails which brokened. Re-fixing in position and tightening of loose check nuts, elbow rails, legs etc i.e. complete charpoy and supplying and fixing the plywood BWR type BB (No of ply 7) ISI marked, of size 1990mm x 900mm, 12mm thick shall be fixed to GI pipe with nuts and bolts of size 55mm x 5.5mm by drilling the holes (06 Nos nuts and bolts on long rails and 4 Nos nuts and bolts on short rails with suitable washers) complete all as specified and directed. Make of Plywood : Duraply/ Century/ Archid Ply/ Bhutan Board/ Durain/ Mysore Chip Board Ltd.

Material and labour for welding of broken pipe of charpoy by MIG type welding without disturbing the other parts of charpoy complete all as specified

CHAIR COMPUTER (510x410x800mm) (TP) Material and labour in repair & replacement of the following components of chair computer complete all as directed by Engineer-in-Charge

Removing of existing old worn out/ unserviceable tapestry cloth, foam, etc from seat of chair and providing new tapestry cloth, over new polyurethane foam cushion 75 mm thick, 40 density and cloth fixing in shape all as per existing with necessary PVC beading wherever required as per design of existing chair. Make of foam - SLEEP WELL/KURLON/SWEET DREAM.

Removing existing old worn out/ unserviceable tapestry cloth, foam etc from back and providing new tapestry cloth, over new polyurethane foam cushion 50mm thick 32 density and cloth fixing in shape all as per existing with necessary PVC beading wherever required as per design of existing chair. Make of foam - SLEEP WELL/KURLON/SWEET DREAM

Material and labour in replacement of broken base of computer chair with the new base with castor wheels as exists and as directed by Engineer-in-Charge

Material and labour in replacement of old unserviceable Hydraulic spindle with new hydraulic spindle make as approved by GE and as directed by Engineer-in-Charge

Material and labour for removing old unserviceable Handle of chair computer and S&F new handle as exists and as directed by Engineer-in-charge.

COMPUTER TABLE (1200X600X750MM) (TP). Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as directed by Engineer-in-Charge.

Removing of old unserviceable top of table of computer and supply and fix of new top of PLPB of size 1200 x 600 x 18/19 mm thick exterior grade, edges finished with PVC beading 1.5 mm thick all as existing and as directed by Engineer-in-Charge.

Supply and fixing in replacement 3 way lock, 4 levers with duplicate keys all as existing, approved and directed by Engineer-in-Charge. Make : As per sample

Removing of old unserviceable sliding key board top of computer and supply and fix of new top of PLPB of size 1200 x 600 x 18/19mm thick exterior grade, edges finished with PVC beading 1.5mm thick with sliding channel all as existing and as directed by Engineer-in-Charge

Material and labour in replacement of drawer with sliding channel as per existing pattern all as specified and directed

BED SIDE TABLE Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed :-

Supply and fixing shelves made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification

Supply and fixing sides made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification

Supply and fixing top made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specification

Supply and fixing 6mm thick commercial ply BWR for back side all as per existing and as directed

Supply and fixing heavy duty channels to drawers as per existing and as directed

Supply and fixing CP handle to drawers as per existing and as directed

BED SIDE LOCKER STEEL (TP). Material and labour for repair & replacement of the following components Almirah Steel with Shelves complete all as directed by Engineer-in-Charge

Supply and fixing in replacement 3 way lock, 4 levers with duplicate keys all as existing, approved and directed by Engineer-in-Charge. Make : As per sample

Supply and fixing in replacement of SS handle as per existing pattern and design and all as directed

Material and labour for painting of locker steel with one coat of synthetic enamel paint inside and outside of locker complete all as specified and directed

TABLE CENTRE WITH GLASS TOP

Supply and fixing in replacement of Glass top of Centre table as per existing pattern and design and all as directed

Material and labour for removing old unserviceable legs of Centre table with Glass top and S&F new leg of first class Sheesham wood as exists and directed.

OFFICE CHAIR LUXURY

Material and labour for removing old unserviceable Leg of office chair and S&F new Leg as exists and directed.

Material and labour for removing old unserviceable Back of office chair and S&F new Back as exists and directed.

MEDIUM BACK CHAIR

Material and labour for removing old unserviceable Leg of med Back chair and S&F new base as exists and directed.

Material and labour for removing old unserviceable Back of med Back chair and S&F new Back as exists and directed.

NOTICE BOARD SMALL (TP) Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as specified and directed

Supply and fixing notice board size 900 x 600 x 100mm of Commercial Board 19mm thick one board teak face block board exterior grade confirming to IS specification all as specified and directed

Removing of old unserviceable blazer cloth and S&F new blazer cloth and including hardware fitting as existing as directed by Engineer-in-Charge

Supply and fixing glass 4.00mm thick free from all defects, distorted images etc as exists all as specified and directed

FOLDING CHARPOY (TP). Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as specified and directed

Removing of old unserviceable plytop of charpoy and supply and fix of new plytop of 12mm thick commercial plywood BWR as per existing shape and size and directed by Engineer-in-Charge

Material and labour for welding of broken pipe of charpoy Folding IP by MIG type welding without disturbing the other parts of charpoy complete all as specified and directed

Material and labour for painting of folding charpoy with legs by applying one coat of synthetic enamel paint OG as directed by Engineer-in-Charge

HATSTAND WITH MIRROR Material and labour in replacement of the following components of hat-stand with mirror complete all as specified and directed

Removing of existing old unserviceable broken mirror and supply & fixing new mirror as per drawing and as directed by Engineer-in-Charge.

Removing old broken/unserviceable base board of hatstand, supply and fixing of new block board 18mm complete as per existing & as directed by Engineer-in-Charge.

Removing old/unserviceable peg set of hatstand, supply and fixing of new peg set complete as per existing & as directed by Engineer-in-Charge.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed

PEG SET OF SIX (TP) Material and labour for removing old unserviceable hook and S&F new metal hook as existing and as directed by Engineer-in-Charge

BED HARD SINGLE (TP) Material and labour in repair & replacement of the following part without disturbing the other components including tightening of frame all as per existing and directed by Engineer-in-Charge:-

Supply and fixing 12mm thick BWR type plywood for bed hard as exists and directed by Engineer-in -Charge

Supply and fixing 1st class teak wood (M.P)/ Hard wood head board side legs as per existing and directed by Engineer-in-Charge

Supply and fixing 1st class teak wood (M.P)/Hard wood foot board side legs as per existing and directed by Engineer-in-Charge

Material and labour for polishing of Bed Hard with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer-in-Charge

BIN LINEN (TP) Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as directed by Engineer-in-Charge

Material and labour for back of bin linen shall be made out of 6mm thick Plywood Commercial grade and fixed with head less nails as directed by Engineer-in-Charge

Supply and fixing of sides made out of commercial plywood 18/19mm thick exterior Grade one side decorative choice and other side balancing white lamination confirming to IS specification and as drirected

Re-canning to Top Front & side of Bin Linen with 4mm Nylon plastic cane as Godrej pattern complete all as shown on drawing. The Cane shall be of best quality as approved by GE

Material and labour for polishing of Bin Linen with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer-in-Charge

LADIES DRESSING STOOL Material and labour for removing old unserviceable cushion with cover of stool dressing ladies and S&F new cushion with cover as exists and directed by Engineer-in-Charge

SOFA CHAIR SINGLE SEATER Material and labour for repair & replacement of the following part without disturbing the other component including tightening of frame all as existing and directed

Material and labour in replacement of existing foam cushion for seat & back of sofa chair. The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed . The back cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/ Sweet dream/ Sleep well

Material and labour for repair and replacement of wooden arm of sofa chair with new Teak Wood arm of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed

Material and labour for polishing of Sofa Chair with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer-in-Charge

BOOK SHELF STEEL GLAZED (TP) Material and labour in repair & replacement of the following components Book shelf steel glazed complete all as directed by Engineer-in-Charge

Removing of existing broken glass of shutter and S&F new 5mm glass as per existing shape & size and as directed by Engineer-in-Charge. Make of glass - Modiguard/ Swastik

Removing of existing defected lock and Supply and fixing 3 way lock, 4 levers with duplicate keys all as existing, approved and specified MAKE : As per sample

Supply and fixing in replacement SS Handle as per existing, approved and directed by Engineer-in-Charge

CHAIR WRITING CUSHIONED (TP). Material and labour in repair & replacement of the following components of chair writing without disturbing the other components including tightening of frame all as directed by Engineer-in-Charge

Supply and fixing of top rails made of teak wood/ Hard wood complete all as specified and directed

Supply and fixing of rails of stiffeners made of teak wood/ Hard wood complete all as specified and directed

Supply and fixing of rails of front legs made of teak wood/ Hard wood complete all as specified and directed

Supply and fixing of rails of rear legs made of teak wood/ Hard wood complete all as specified and directed

Supply and fixing Seat made of 12 mm commercial plywood & 50mm thick synthetic foam of 32 density covered with tapestry cover (Cost not less than Rs 250/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as directed. Make of foam- Sleep well/ Kurlon/ Sweet Dream.

Material and labour for polishing of Chair dining with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer-in-Charge

SIDE BOARD 1200X400X750 MM (TP) Material and labour for replacement of unserviceable broken top of side board of thickness 18/19mm commercial board exterior grade Including taking out the old part from :-

Supply and fixing for shutter Door of 18/19mm thick commercial board exterior grade, Fixed with 4mm thick TW beading all round. Including taking out the old part from the item as specified and directed by the Engineer-in-Charge

Ditto Srl item No 21.01 above but shelf of 18/19mm thick commercial board exterior grade

Material and labour in repairing /replacement of Drawer made out of 18/19mm plywood commercial board exterior grade alongwith fixing of fancy Knob to the drawer as specified and directed by the Engineer-in-Charge

Material and labour in repairing/ replacement of Plywood 6mm thick fixed at rear portion of the side board complete all as specified and directed by the Engineer-in-Charge

Material and labour in replacement of unserviceable long rail made out of first class Indian teak wood well seasoned and free from Knots as specified and directed by the Engineer-in-Charge

Removing of existing broken catcher of Shutter and S&F new magnet catcher as per existing shape & size and as directed by Engineer-in-Charge

Removing of existing broken glass of Shelf S&F new 4mm glass as per existing shape & size and as directed by Engineer-in-Charge Make of glass - Modiguard/ Swastik

SOFA TWO SEATER (TP) Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as existing and directed

Material and labour in replacement of existing foam cushion for back of sofa two seater. The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/ Sweet dream/ Sleep well

Material and labour in replacement of existing foam cushion for seat of sofa two seater. The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/ Sweet dream/ Sleep well

Supply and fixing back leg (Teak Wood)/ Hard wood left/ right all as per existing and as directed by Engineer-in-Charge

Supply and fixing front leg (Teak Wood)/ Hard wood left/ right all as per existing and as directed by Engineer-in-Charge

Supply and fixing of top rails made of teak wood/Hard wood complete all as specified and directed

Supply and fixing of rails of stiffeners made of teak wood/Hard wood complete all as specified and directed

Supply and fixing of rails of rear legs made of teak wood/Hard wood complete all as specified and directed

Material and labour for polishing of two seater Sofa with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer-in-Charge.

SOFA SET 4 SEATER (2+1+1) TP. Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as existing and directed

Material and labour in replacement of existing foam cushion for back of sofa set (4 seater).The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/ Sweet dream/ Sleep well (In one Set = 04 Nos Back cushion)

Material and labour in replacement of existing foam cushion for seat of sofa set (4 seater).The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/ Sweet dream/ Sleep well (In one Set = 04 Nos Seat cushion)

Material and labour in repair and replacement of wooden long rail of sofa set with new M.P. Teak Wood/ Hardwood long rail of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed

Material and labour in repair and replacement of wooden short rail of sofa set with new M.P. Teak Wood/ Hardwood short rail of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed.

Material and labour for polishing of four seater Sofa with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer-in-Charge

SOFA SET 5 SEATER (3+1+1) (TP) Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as existing and directed

Material and labour in replacement of existing foam cushion for of sofa set (5 seater).The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/ Sweet dream/ Sleep well (In one Set = 05 Nos Back cushion)

Material and labour in replacement of existing foam cushion for seat of sofa set (5 seater). The cushion shall be made of flexi polyurethane foam of 40 density 75mm thick with extra padding of 20 mm thick polyurethane foam of existing shape & size and with tapestry cloth (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as specified. The seat cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well (In one Set = 05 Nos Seat cushion)

Material and labour in repair and replacement of wooden arm of sofa set with new Teak Wood arm of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed.

Material and labour for repair and replacement of wooden batten of sofa set with new Teak Wood batten of existing shape & size without disturbing to other component duly french polished complete all as existing and directed.

Material and labour for repair and replacement of wooden long rail of sofa set with new M.P. Teak Wood/ Hard wood long rail of existing shape & size without disturbing to other component duly french polished complete all as per existing and directed

Material and labour for polishing of five seater Sofa with one coat of french polish on old surface and two coats of french polish on new surface as directed by Engineer-in-Charge

EASY CHAIR CUSHIONED (SET OF 3) Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as specified and directed

Material and labour in replacement of existing foam cushion for seat of size 550mm chair Easy (set of three).The cushion shall be made of flexi polyurethane foam of 40 density of size 75mm thick of existing shape & size and with tapestry cover of best quality complete all as specified, shown on drg and directed .The seat cushion frame shall be fixed on existing wooden plytop all as existing and directed. Make of Foam:- Kurlon/ Sweet Dream/ Sleepwell

Material and labour in replacement of existing foam cushion for back of size 550mm Chair Easy (set of three).The cushion shall be made of flexi polyurethane foam of 40 density of size 50mm thick of existing shape & size and with tapestry cover of best quality complete all as specified, shown on drg and directed. The seat cushion frame shall be fixed on existing wooden plytop all as existing and directed. Make of Foam:- Kurlon/ Sweet Dream/ Sleepwell

Supply and fixing seat of chair Easy made of 12mm thick plywood (BWR) of size 540 x 475 complete all as directed. Make of plytop : greenply/ kitply/ century

Material and labour in repair and replacement of arm side 4mm plywood and 40mm cushion with tapestry cloth of existing shape & size all as specified, shown on drawing and directed

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

STUDY CHAIR(TP) Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as specified and directed

Supply and fixing of front legs made of teak wood/ Hard wood all as per existing and as directed by Engineer-in-Charge

Supply and fixing of top rails made of teak wood/ Hard wood complete all as specified and directed

Supply and fixing of rails of stiffners made of teak wood/ Hard wood complete all as specified and directed

Supply and fixing of arm (Teak Wood) left/ right all as per existing and as directed by Engineer-in-Charge

Supply and fixing seat of study chair made of 12mm thick plywood (BWR) complete all as directed. Make of plytop : Greenply/ Kitply /Century

Material and labour in replacement of existing tapestry cloth for back of chair (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed

Material and labour in replacement of existing tapestry cloth for seat of chair (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed .

Supply and fixing 100mm thick synthetic foam of 40 density for Seat of chair all as per existing and directed by Engineer-in-Charge. Make of foam- Kurlon/Sweet dream/Sleep well

Supply and fixing 50mm thick synthetic foam of 40 density for Back of chair all as per existing and directed by Engineer-in-Charge. Make of foam- Kurlon/Sweet dream/Sleep well

SOFA CHAIR (TP) Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as existing and directed

Material and labour in replacement of existing foam cushion for back of sofa chair. The cushion shall be made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth ,shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam :- Kurlon/Sweet dream/Sleep well

Material and labour in replacement of existing foam cushion for seat of sofa chair. The cushion shall be made of flexi polyurethane foam of 40 density 100mm thick of existing shape & size and with tapestry cloth , shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as specified. The seat cushion frame shall be fixed on existing wooden frame all as existing and directed. Make of Foam:- Kurlon/Sweet dream/Sleep well

SHELVES WITH GLASS

Material and labour for repair and replacement of broken glass of shelves with new 5mm thick tuffenned glass of existing shape & size and as directed.

Material and labour for repair and replacement of broken ply of shelves with new ply (12mm thick Decorative ply) of existing shape & size and as directed.

DRESSING MIRROR WITH BOX (TP). Material and labour for box of table dressing gents made out of commercial board 19mm thick with veneer face as shown on drawing overall size of box shall be 700 x 300 x 200mm. teak wood beading shall be fixed including taking out the old unserviceable parts from table dressing gents as shown and as directed by Engineer-in-Charge

All as narrated above but supply & fixing of looking mirror of existing size 620mm wide and 850mm high 4mm thick along with wooden frame of size 25 x 20mm thick made to the shape as specified and directed by the Engineer-in-Charge free from distortion and other defects

All as per item No. 29.01 above but fixing the 6mm thick plywood backing of mirror as specified and shown on drgs.

Removing of old unserviceable drawer and supply and fix of new drawer with sliding channel all as per existing and directed by Engineer-in-Charge

Supply and fixing in replacement SS Handle as per existing, approved and directed by Engineer-in- Charge

CHAIR CBA STEEL (TP). Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as specified and directed

Material and labour in replacement of existing Rexene cover for back of chair, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed .

Material and labour in replacement of existing rexene cover for seat of chair, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed .

Supply and fixing 100mm thick synthetic foam of 40 density for Seat of chair all as per existing and directed by Engineer-in-Charge. Make of foam- Kurlon/Sweet dream/Sleep well

Supply and fixing 50mm thick synthetic foam of 40 density for Back of chair all as per existing and directed by Engineer-in-Charge. Make of foam- Kurlon/Sweet dream/Sleep well.

Material and labour in replacement of existing arm rest of chair, S&F new arm rest as exists complete all as specified and directed

CLERK TABLE (1200x600x750 mm)(TP). Material and labour in repair & replacement of the following components of table clerk with three drawers without disturbing the other components including tightening of frame all as specified & directed.

Top made of 19 mm thick commercial board with 1 mm thick laminated sheet of size 1200x600 mm, edges finished with PVC beading 1.5mm thick as per existing shape and size and directed by Engineer-in Charge.

Supply and fixing in replacement SS Handle as per existing, approved and directed by Engineer-in-Charge

Supply and fixing in replacement 3 way lock, 4 levers with duplicate keys all as existing, approved and directed by Engineer-in-Charge. MAKE : As per sample

Removing unserviceable drawer. S&F new drawer unit with channel as per existing without disturbing to other component all as directed by Engineer-in-Charge

ALMIRAH LARGE STEEL (TP) Material and labour in repair & replacement of the following components Almirah Steel with Shelves complete all as directed by Engineer-in-Charge

Supply and fixing in replacement 3 way lock, 4 levers with duplicate keys all as existing, approved and directed by Engineer-in-Charge MAKE :As per sample

Supply and fixing in replacement of SS handle as per existing pattern and design and all as directed.

CHARPOY GI PIPE (Drg No. FD-220) Matrial and labour for reweaving of charpoy with nylon newar white, 50 to 55mm wide closely woven with minimum 13 & 33 bend on both sides, weight of newar per charpoy shall be 1.50 Kg to 1.60 Kg weaving and tightening complete all as specified and shown on drg including taking down/ removing of old nylon newar & tightening of all components of Charpoy GI pipe as directed by Engineer-in-charge. Make: USHA/ Evershine. Note: After repairs, the charpoy shall be stacked inside or outside the building in accountable stacks.

Material and labour for removing of old unserviceable/broken newar from Charpoy GI pipe and supplying of and fixing the plywood BWR type BB ISI marked of size 1990mmX900mm,12mm thick and providing MS flat iron 40mmX5mm thick,the plywood and flat iron shall be fixed to GI pipe with self drilling screw 5.5mmX55mm (06 Nos nuts and bolts on long rails and 4 nos on nuts and bolts on short rails with suitable washers)each flat iron shall be fixed to plywood from bottom side with 02 nos screw of suitable size and length as approved by GE by drilling the holes in flat iron complete all as specified the exposed surface of flat iron shall be painted with two coats of synthetics enamel paint of black over a coat of red oxide all as shown on drgs. Make of plywood : (Duraply/ Century/ Archid ply/ Archid Board/ Durian/ Mysore Chip Board Ltd) Note: The modofication of charpoy shall be carriedout as per sample of charpoy kept in furniture yard BSO (E) JRC

Removing of old/ broken threaded long rail from charpoy GI and supply & fix new long rail made of GI tubing 32mm bore Medium grade ISI marked both ends threaded complete all as specified and as shown on Drg No. FD-220. Make of pipe : TATA/ Jindal/ Ravindra.

Removing of unserviceable short rail from charpoy GI and fixing of short rail made from long rail obtained from srl item No.35.00 above (1 x long rail coverted in to 1 No of short rail) both ends threaded complete all as specified and as shown on Drg No. FD-220

Removal of old/ broken threaded leg from charpoy GI and fixing of leg made from old short rail obatined from Item No 36.00 above duly threaded one side complete all as specified and as shown on Drg No. FD-220.

Removal of old/ broken elbow 32mm bore three ways from charpoy GI and supply and fix new elbow three way medium grade ISI marked suitable for 32mm bore GI pipe complete all as shown on Drg No. FD-220. Make - Vimco/RI (ISI Marked)

Removal of old/ unserviceable check nut from charpoy GI and supply and fixing new check nuts suitable for 32mm bore GI pipe and fixing to position complete all as specified and as shown on Drg No. FD-220. Make - Vimco/RI (ISI Marked)

om parkash and sons (BID ID -3105367)

SANMATI UDYOG (BID ID -3120676)