Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.8 LAccepted-AOC 15 281 CHHILI INT ROAD GHATIYA AZAM KHAN AGRA UTTAR PRADESH 282003 | AGRA | UTTAR PRADESH | 282003 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹48.0 L+₹9.0 L (23.1%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹49.3 L+₹10.3 L (26.3%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹49.3 L+₹10.3 L (26.5%)Rejected-Finance T 16 1 SHETTY HOTEL OLD NAVY NAGAR COLABA MUMBAI 400005 | MUMBAI | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹50.0 L+₹11.0 L (28.2%)Rejected-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.1 L
Closing Date
29 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
COMPREHENSIVE REPAIR WORK IN MES BLOCK AT OLD AND NEW NAVY NAGAR UNDER AGE BR I UNDER GE NW NAVY NAGAR COLABA MUMBAI
2022_MES_553373_1
8299/CWE (NW) Mumbai/ E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar
Clas C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹1.1 L
Yes
5 Dec 2022
21 Sept 2022
31 Oct 2022
21 Sept 2022
29 Oct 2022
15 Oct 2022
21 Sept 2022 - 10 Oct 2022
Amount
Material and labour applying one coats of white wash on old plastered surfaces including preparation of surfaces as in wall complete all as specified and directed by Engineer-in- Charge.
All as per item No 01 above but on ceiling complete all as specified and directed by Engineer-in- Charge.
Material and labour applying one coat of Acrylic distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified and directed by Engineer-in- Charge.
Material and labour applying two coats of Acrylic distemper white or tinted on wall after necessary preparation of surface including removal of swelled popup paint, cracks and applying wall care putty to make the surface even complete all as specified and directed by Engineer-in- Charge.
Taking down cement plaster of any discription including racking out joints hacking for key scrubbing down with water & removed debrises out MD land complete all as specified and directed by Engineer-in- Charge.
Material and labour Plastering on concrete surfaces of ceiling, beams, lintels, walls etc, 20mm thick (10+10mm)in two coats in CM (1:4) , mixed with water proofing compound on fair faces of brick work or concrete surfaces, finished fair & even without using extra cement complete all as specified (WPC to be mixed in setting coat only and shall be measured and paid separately) complete all as specified and directed by Engineer-in- Charge.
Material and labour applying one coat of Rust remover and rust passivator on exposed reinforcement surfaces at any height complete all as specified and directed by Engineer-in- Charge.
Material and labour rendering 15mm thick in CM (1:6) on wall finished even and fair without using extra cement as in patches complete all as specified and directed by Engineer-in- Charge.
All as per item no 08 above but 10mm thick in CM (1:3) in ceiling complete all as specified and directed by Engineer-in- Charge.
Material and labour for preparing newly plastered surfaces of wall and applying two coats of oil emulsion distemper over a coat of primer and one coat of wall care putty complete all as specified and directed by Engineer-in- Charge.
Material and labour preparation of old undecorated surfaces of walls, soffit and fascias of chajjas etc and applying one coats of weather proof Acrylic based paint(100% Acrylic) exterior grade over a coat of primer complete all as per manufacturers instructions complete all as specified and directed by Engineer-in- Charge.
Preparation of old decorated surfaces of walls by any means scrapping old surface washing the surface with Bleaching powder throughly, filling the cracks with cracks filling compound of DR Fixit crack free chemical or shrink free as per manufacturer instruction & applying two coat of rain coat over a coat of primer including scaffolding etc complete all as specified and directed by Engineer-in- Charge. a) Old surface shall be cleaned with bleaching powder as specified including biowash all as per maufacturer instructions. All Cracks etc shall be filled with white cement and Sand Mortar (1:3) by making V grooves of Appropiate size. b) Rain coat painting shall be done with Roller. c) Rate Quoted shall be of Scaffolding
Material and labour for preparing newly plastered surfaces of wall and applying two coats of rain coat over a coat of primer complete all as specified and directed by Engineer-in- Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) size area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding layer in CM 1:4 complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Glazed colour ceramic tiles in vertical surfaces 300 x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering as backing layer in CM 1:4 complete all as specified and directed by Engineer-in- Charge.
Material and labour machine cut pre-polished kota stone 18 to 20mm thick slab in riser of steps, skirting, dado windows cill and pillar laid over and including 10 mm thick cement plaster in cm (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including demolition of existing floor finish complete all as specified and directed by Engineer-in- Charge.
Material & labour for glazed ceramic tiles in vertical surface 300x450x7 to 8 mm thick set and jointed in neat cement slurry over and including 10mm thick cement plaster in cement mortar (1:4) and pointed in white or coloured cement to match complete all as specified and as directed by Engg-In-Charge
Material & labour for non skid coloured jointed free ceramic tiles of size 600mmx600mmx10mm thick in floors over and including 20mm thick screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in- Charge.
Taking down shutters exc 1.00 sqm but not exc 1.50 sqm and removing to or from store complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Factory made solid panel pvc door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engineer-in- Charge.
Cutting holes in brick walls but in brick walls built in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement lime mortar in cm 1:2;4 type B-1 not exceeding half brick as required depth of embedded portion of holdfasts complete all as specified and directed by Engineer-in- Charge.
Material and labour MS works in holdfast made of fe -290 of length complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Aluminium, anodised, barrel tower bolts of extruded section and fixed 150 mm length complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Aluminium handles, cast type, anodised of length 150 mm complete all as specified and directed by Engineer-in- Charge.
Supply and fixing 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs Cast iron nahani trap 100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B1(1:2:4) complete all as specified and directed by Engineer-in- Charge.
Demolition of cement Concrete unreinforced in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engineer-in- Charge.
Material and labour Cement concrete type B-1, 1:2:4 (20mm graded aggregate) 40 mm thick in flooring, complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs Stainless sink coupling of external 110mm dia along with necessary fittings complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer-in- Charge.
Material and labour applying one coats of synthetic enamel paint including preparation of old wooden surfaces over 10cm width/girth complete all as specified and directed by Engineer-in- Charge.
Material and labour preparation of old painted surfaces over 10cm width or girth and applying one coats of synthetic enamel paint on steel surfaces complete all as specified and directed by Engineer-in- Charge.
Hacking out broken glass panes of any description from wooden frames or aluminium fixed with beads complete all as specified and directed by Engineer-in- Charge.
Supply and fixing 4mm thick pin headed type ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engineer-in- Charge.
Resecuring or easing & adjusting of shutters, without taking down but exc 1 sq. m and n exc 2 sq. m each complete all as specified and directed by Engineer-in- Charge.
Resecuring or easing & adjusting shutters , without taking down upto 1 sq. m each complete all as specified and directed by Engineer-in- Charge.
Supply and fixing 125 mm extruded aluminium handles, fabricated type anodised fixed in repairs complete all as specified and directed by Engineer-in- Charge.
All as per item No 39 above but 100 mm complete all as specified and directed by Engineer-in- Charge.
Supply and fixing 150mm aluminium anodised barrel tower bolts of extruded section fixed in repairs complete all as specified and directed by Engineer-in- Charge.
All as per item No 41 above but 100 mm complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs Pillar taps of 15 mm dia , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding water taps waste chain plugs and porcelian stopper but including brackets complete all as specified and directed by Engineer-in- Charge.
Supply and fixing CP brass pillar tap 15mm, screwed down high pressure fancy type complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs pvc connectors of 15 mm size with PTMT nuts of length 600 mm length complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs PVC waste pipe of 32 mm dia 800 mm length complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs CP grating of size 100 mm complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs cupboard/drawer pulls, 3 screw plate with fixed dished pull, 80 mm to 100mm long handle brass type complete all as specified and directed by Engineer-in- Charge.
Material and labour aluminium powder coated drapery rod of 20 mm dia including curtain rings (minimum 6 Nos for each curtain rod) complete all as specified and directed by Engineer-in- Charge.
Supply and fixing aluminium powder coated fancy type domes cum bracket (20 mm dia) fixed to both ends of the drapery rod and wall complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repairs anodized aluminium DECO grills 7.5mm thick, as existing grills, DG - 102 complete all as specified and directed by Engineer-in- Charge.
Supply and fixing 5.5 mm thick frosted glass ordinary quality in square n.exc 0.50 sqm each fixed to aluminium window frame complete all as specified and directed by Engineer-in- Charge.
Taking down shutters n.exc 2.00 sqm each removing to or from store complete all as specified and directed by Engineer-in- Charge.
Supply and fixing 30 mm thick Flush shutters, solid core construction, with particle board core complete all as specified and directed by Engineer-in- Charge.
Suppling and fixing 2nd class hardwood 35mm thick glazed and skelton shutters, open rebated and prepared to receive wire mesh edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing mesh etc, sizes of members of shutters as specified in SSR complete all as specified and directed by Engg-In- Charge.
Supply and fixing Aluminium alloy wire cloth, 0.32 to 0.35mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples to wooden/aluminium frames complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Marine ply 18mm thick as in cupboard shutter including fixed with piano hinges complete all as specified and directed by Engineer-in- Charge.
Supply and fixing in repair/ replacement of internal 15mm bore steel water tubing, galvanised, Medium grade with all fittings such as nipple, union, socket, elbow, bends, fixed to wall including work to be done up to 15 th floor in high rise buildings in short piece/length, including breaking the existing brick wall for replacement of corroded GI pipe in/ on wall and making good the disturbed surfaces to match previous structure with complete all as specified and directed by Engineer-in-charge of following sizes :-
All as per item No 61 above but 20 mm bore complete all as specified and directed by Engineer-in- Charge.
Supply & fix in repair of PVC(LLDPE) rectangular loft tank of net capacity 275 Ltrs with gross capacity of tank at least 5% in excessof minimum net capacity including 03 Nos adopter with washer for inlet/outlet overflow pipe as per manufacturere s instruction and overall dimension as 995-1200mm length , 620-820mm with 285-485mm height , 300mm internal dia of hand hole,minimum wall thickness 2.75mm( weight of tank 11 Kgs) with lid cover complete all as specified and directed by Engineer-in- Charge.
Tacking down and refixing PVC profile suitable for 275 ltrs loft tank including fixing of aluminium channel around the profile complete all as specified and directed by Engineer-in- Charge.
Supply and fixing Aluminium anodised section 15 micron for window (Sliding type) / ventilator (Partly fixed party louverd type) etc of anodised aluminium section ventilators partly fixed partly louvered type comprising frame, shutters, locking arrangements including necessary jamming, glazing pins, neoprene beading, glazing pin screw, levered aluminium sections for louvered glass, rollers , handle etc complete all as specified and directed by Engineer-in- Charge. Note: (a) Glazing shall be measured separately. (b) Item shall be paid as per weight of aluminium section. (c) Rate quoted shall be inclusive of neoprene beading, glazing clips, screw etc as required which not be measured for arriving the weight. (d) Rate shall be inclusive of the aluminium handle, locking arrangement including complete packing with silicon gel around contecting surface of aluminium and including matching the existing surface area complete all as specified. (e) Aluminium window / ventilator etc to be fixed with cadmium plated screw not more than 300mm c/c.
Supply and fixing of 04 pieces pulley operated Cloths Drying system casting of Aluminium pipe of outer dia 22 mm inner dia 19.8 mm and channel pair of length 2.00 mtr with pulley made up of devil mounted and fixed with self tapping screw. Rope will be HDPE double core of 4 mm with rope Guide at locking system to hide rope. Channel to be dia of minimum weight of pipe shall not be less than 0.20 kg/Rm and maximum weight of Pipe in one unit not less than 2 kg. Weight of rope shall be not less than the 550 gms / mtrs including taking down old unserviceable cloth hanger complete all as specified and directed by Engineer-in- Charge. Make :- As per sample approved by GE
Disconnecting existing water tanks, exc 1000 ltrs but n. Exc 2000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position complete all as directed by Engr in Charge ( cleaing/repairing measured separately )
Removal of existing water proofing treatment of the roof, cleaning with wire brushes etc including demolition of PCC padding of any description and in any position complete all as specified and directed by Engineer-in- Charge.
Material and labour for Plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) mixed with Shali Plast LW+ of STP/Pidilite URP of Dr. Fixit or Equivalent and appoved as per manufactures instruction. Before laying concrete surface shall be cleaned and a bond coat of slurry with Shali Crete URP (of STP) or quivalent with cement to be applied. Alll cracks in slab to be openend in 'V' groove and filled with Shali Fix RMC a Polymer Morter of STP/ equivalent complete all as specified and directed by Engineer-in- Charge.
Material and labour for sand faced cement plaster 20mm thick in two coats using factory manufactured pre mix/ readymix of 'Roofit Mix' of M/s Premier Floor to Rood Materials Pvt ltd/ Easy Plast' of M/s Walplast products pvt. Ltd 'Readiplast' of M/s Ultratech cement Ltd/ ' M/s Ultratech cement Ltd/ 'Soundplast PMC-1' of M/s Sound buildcare pvt Ltd' or other approved equivalent make having minimum composition of C:S:: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechanical mixing with water in a metallic tray only to make good consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces with base coat of 12mm thick and finishing coat of 8mm thick final rendering, including using richer mix for making corners if necessary, at all floors and levels. Including making grooves of existing size wherever required, including cleaning the surfaces, curing etc. complete all as specified and as directed by Engr-in-Charge.
Material and labour for protecting the roof including parapet wall with water proofing coating ,complete as specified below: (a) Clean the surface and apply one coat of primer (STP Shali Urethane BTD diluted in water in 1:1 ratio and applied @ 400 gm/sqm OR Dr, Fixit primeseal diluted in water in 2:1 ratio and applied @ 7-8 sqm/ltr) and allows to dry for 6 to 8 hrs. (b) Apply first coat of water proofing coating over primer surface (Shali Urethene BTD with non butuminous bleding of STP Ltd. @ 1 Sqm/Ltr without dilution OR Dr. Fixit New Coat without any dilution @ 2 Sqm /Ltr) (c) Lay Non woven fiber glass mesh (Reinforcement of Shali Geo Text 40/50 gsm of size 2.5mm x 2.5mm) or equivalent with overlap of 50 mm on both direction while the first coat is still wet. (d) Apply second coat of water proofing coating as per manufactures instruction after 6-8 hrs of drying of first coat. (e) Apply third coat of water proofing coating (as per manucturer instruction) after 6-8 hrs of drying of second coat The total thickness of 1 to 1.2mm must be achieved after 7 days of air cure. Note : 1) The colour of each coat shall be as directed by GE. 2) The work shall be carried out by aithorised applicator only 3) Water proofing to rain water spouts to be done as per manufacturer instruction
Nilesh Construction
RAMESH ENTERPRISES
Shetty Construction Co
Anil Industrial Corporation
SHREE JAGDISH FURNITURE CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .