Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹6.6 LAccepted-AOC | 1 | Accepted-AOC being lowest | |
| 2 | 2₹7.3 L+₹71,570.68 (10.8%)Rejected-Finance | 2 | Rejected-Finance BEING NOT LOWEST | |
| 3 | 3₹8.4 L+₹1.8 L (26.7%)Rejected-Finance | 3 | Rejected-Finance BEING NOT LOWEST |
Tender Value
Refer Docs
EMD Value
₹18,500
Closing Date
11 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) FATEHGARH
AGE (I) FATEHGARH
PROVN OF CERTAIN MINOR WORK AND REV WORK UNDER AGE (I) FATEHGARH.
2024_MES_649215_2
AGE(I)/FAT/ET-68 OF 2023-2024
Open Tender
Miscellaneous Works
Works
180 days
AGE (I) FATEHGARH
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
AGE (I) FATEHGARH
₹18,500
Yes
2 Sept 2024
24 May 2024
17 Jun 2024
24 May 2024
11 Jun 2024
24 May 2024
Amount
Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation / trenches for laying pipes/ cable and similar work and getting out in soft /loose soil etc complete all as specified and directed
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M&L for RCC (Nominal mix) type B-1 (1:2:4) (20 mm graded aggrete) as in Beams, cantilevers, bressummers, lintels over 1.5m span complate all as specified and directed.
M&L for RCC (Nominal mix) type B-1 (1:2:4) (20 mm graded aggrete) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L of mild steel TMT Bars 10 mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .
M&L of mild steel TMT Bars but 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends binding with and including mild steel wire (annealed) not less than 0.9 mm dia securing with clips complete all as specified and directed .
M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.
M&L Brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius in half brick thick wall built in cement mortar (1:6) complete all as specified and directed.
M & L Rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement.
M & L for preparation of new plastered surfaces of walls and applying two coats of OBD over a coat of chalk whitening complete.
M & L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces to be finished even and smooth without using extra cement.
M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified and as directed.
M&L for 40mm thick Damp proof course in cement concrete 1:2:4 type B-0 to horizontal or vertical surfaces including necessary formwork etc complete all as specified and directed
M & L for sand filling under floors or in foundations including watering and consolidation
M&L broken stone hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rolled/ rammed to a true surfaces complete all as specified and directed.
M&L PCC (1 : 3 : 6) type C2, 75 mm thick ( by using 40mm graded stone aggregate) for plinth pretection finishing even and smooth without using extra cement with necessary expension joints at every three metre or change of directiion complete all as specified & directed.
M & L Rendering 5mm thick in CM (1:3) on fair faces of brick work ceilling concrete surfaces to be finished even and smooth without using extra cement.
M & L for preparation of new plastered surfaces of ceiling and applying three coats of white wash on ceilling complete.
M&L Non skid mat finished coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete including 15mm thick screed bed or bedding layer of cement mortar (1:6 ) for laying floor finishes all as specified and directed .
M&L Glazed coloured ceramic tiles in vertical surfaces 450mm x 300 mm x 7 mm thick (pattern/digital tiles) set and jointed in neat cement slurry and pointed in white or colour cement to match over plastering 10mm thick on fair faces of brickwork or concrete surfaces in CM (1:4) to receive wall finishes as specified and directed ..
S & F Solid PVC Door frame of size 50mm x 47mm made out of 5mm palin colour PVC sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.
S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. M S Frame shall be covered with heat moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side & as gap insert for tip rail & bottorm rails; Panelling of plain colour PVC sheet to be fitted in the MS frame weloded/seated to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement. suppling and fixing in the frame at site as per specification & drawing.
Supply & fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
Preparation of new steel surface of any description not otherwise described over 10 cm width or grith and applying two coats of synthetic enamelled paint over a one coat of redoxide primer alround complete all as specified and directed.
S&F mild steel butt hinges cold rolled of size 100mm medium weight.
S&F Aluminium anodised barrel tower bolts of extruded section of 125mm size etc complete all as specified and directed.
S&F Aluminium handles, cast type anodised of size 125mm etc complete all as specified and directed.
S&F 300 mm long aluminium anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.
M&L for Formwork to sides and soffit of floor or roof beams,beam haunching, girders,bressum-mers, lintel, cantilevers, shelves including supports,overhangs,etc.also plays between floors and beams, etc for rough finished susrfaces of concrete complete all as specified and directed.
M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished susrfaces of concrete complete all as specified and directed..
S & F Vitreous China Urinal, Half stall type, white), with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed.
S&F Vitreous China Wash Basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets , 32 mm PVC waste pipe, 32 mm PTMT Waste coupling and 15 mm dia Pillar taps fancy type chromium plated complete all as specified and directed
M & L for 32mm Bottle trap of PTMT fixed to Wash hand basin having minimum waterseal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) etc complete all as specified and direted.
S& F Gun metal glove or gate valves. With iron wheel head, screwed both ends for 20 mm iron pipe and fixed screws complete all as specified and directed
S&F Low Level Flushing System PVC valveless syphonic action type, 10 ltrs capacity white, with inlet, ball float and handle including brackets complete all as specified and directed.
Supply only integral Water Proofng Compound
S&F conclead type Stop valves angle, facy type , screwed down for iron pipe and fixed to 15mm bore pipe , complete all as specified and directed.
S&F 15mm Chromium plated bib tap Chromium plated fancy type screwed down for iron pipe and fixed to 15mm bore pipe complete all as specified and directed.
S & F 15mm Stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F PVC connection 15mm size with PTMT nuts of length 450mm etc complete all as specified and directed.
S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long
S&F vitreous china urinal partition white of size 310 mm x 700 mm complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT Float valve complete all as specified.
S&F Steel Tubes Medium Grade Bore of tube in 15mm galavanised with all fitting laid in walls, ceiling or laid in floors etc complete all as specified and directed.
....ditto as above but for 20 mm bore tubing ...ditto..
S&F chromium plated Soap dish of any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S & F Brass chromium plated, Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F Vitreous China Wash down water closet pan semi-pedastel pattern (anglo indian type) white in colour connected with and including S or P Trap including water closet seat ,black ,closed pattern with flat bottom and cover and MS chromium plated hinging device complete all as specified and directed.
S & F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed
M&L of 75 mm dia. Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete.all as specified and directed .
Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified and directed.
Removal of surplus excavated soil to a distance n exc 50 m and deposited where directed at a level n exc 1.5 m above the starting point all as specified and directed.
S & F PVC ( SWR ) pipe 110 mm dia single socketed in any length with rubber ring joints ,fixed to wall or laid in floor complete all as specified and directed.
S & F PVC ( SWR ) bend 110 mm complete all as specified and directed.
S&F sheet glass 3 mm thick ordinary quality and gazing with oil putty in square n exc 0.5 sqm each panel all as specified and directed by Engineer-in-Charge.
M & L for Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation / trenches for laying pipes/ cable and similar work and getting out in soft /loose soil etc complete all as specified and directed
M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.
M & L for Reinforced concrete pipes 200mm dia, class NP2, laid and jointed complete with collars complete all specified and directed.
M&L for PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in bed of drain for 200mm bore pipe inlcluding packing under and haunching against the side of pipes after they are laid in and tested complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed
M & L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded aggregate) as in sub base all as specified and directed.
M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade in floors with grey pigment and cement over sand cushion of 20mm thick complete all as specified and directed
M & L for PCC 1:2:4 type B-1 (using 20mm graded stone aggt) as in kerb stone, coping and all other siilar works including necessary formwork etc complete all as specified and directed
Removing Excavated material n. Exc. 50m and depositing where directed at a level n. Exc. 1.5m above the starting point etc complete all as specified and directed.
Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and directed.
S & F hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, welding etc., and similar work conforming to Fe-290 Gde E-165
M & L for Wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples or welding etc complete all as per specified and directed.
Cutting holes into or throughin brick walls built, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concreteand making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required exc 150 sqcm but n exc 400 sqcm etc all as specified and directed
S&F air termination multi point copper rod 12 mm dia and 300mm long fixed on PCC post 0.25x0.25m alongwith 1 mtr 20mm GI pipe med grade complete all as specified and directed.
S&F test point terminal block made of gun metal on phosphours bronze size 75x75x25mm drilling and screwed including taken down complete all as specified and directed
S&F copper strip 20x3 mm with saddles and fixing screws etc for down conductor to be fixed along the wall/ roof including taken down complete all as specified and directed.
M&L for Earthing complete with copper earth plate electrode 600x600X3.15 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below ground level earth plate connected with copper strip (20x3) mm as earthing lead by means of bolts, nuts, check nut and wahers of galavanised iron all as shown in Electrical plate No.3 of MES Sch part I and testing on completion. Including neccessary excavation and earth work, adequate common slat, charcoal dust and funnel PCC (1:3:6) type C-1 pit with pre-cast RCC (1:2:4) type B-1 cover, 40mm thick reinforced with 8 mm dia bars, MS bar 3 Nos both ways funnel with 20, mm dia GI grade watering pipe earthing lead with GI protection pipe medium grade 40mm dia up to 7.5m. from earth plate to equipment earth point complete all as specified .
Supply, installation, testing & commissioning of Desert Cooler single phase 230 V, 50Hz with three speed control with honey comb for optimum cooling including castor wheels for easy mobility with air flow not less than 4000 cubic m/hr plastic body, powerful fan 15'' diameter with water tank capacity of not less than 50 ltrs and motor with thermal overload protection and including writingCA NO and MES No. as style and size decided by engineer in charge complete all as specified and as directed.
M&L for point wiring for One light/Fan/Exhaust fan point controlled by one switch with 1100 volt grade PVC insulated and unsheathed 1.5 Sq mm (FRLS) multistranded copper conductor cable with continuous earth wire of 1.5 Sq mm (FRLS) multistranded copper conductor cable PVC insulated and unsheathed, drawn in & including concealed PVC rigid conduit medium grade with fittings (ISI marked) not less than 20 mm dia & 1.6 mm thick sunken pressed steel galvanised terminal boxes with top cover ISI marked plastic laminated hylam sheet for housing/ fixing switches etc complete all as specified and as directed. for the following- Note- (i) The quoted rete is deemed to be included for the chases cutting. (ii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour.
ditto as above but for One 5 pin 6 Amp socket point controlled by one switch on same board….ditto…
S&F 5 Amp Switch socket combination 2 in 1 , 3 pin 5 Amp flush type complete
S&F Switch Piano flush type 6 Amp single pole one way.
S&F Socket outlet 2 in 1, 3 pin, 6Amp complete
S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed.
M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit medium grade concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. (Note :- Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length)
Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with copper thimbles as required complete all as specified.
S&F of MCB SPN 63 Amp 240 volt 'C' curve complete all as specifed and directed.
S&F of MCB SP 6 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed.
S&F of LED lights fitting 4 feet, 20 Watt, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers including complete fitting all as specified & directed.
S & F building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 40 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of builiding security light fittings completed all as specified and directed.
M/S S P CONSTRUCTION
SIDDHIVINAYAK CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .