Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.3 LAccepted-AOC FLAT NO 04 3RD FLOOR HARI BHAVAN PLOT NO 44 MAHANT ROAD VILLES PARLE EAST MUMBAI 400057 | MUMBAI SUBURBAN | MAHARASHTRA | 400057 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹19.4 L+₹17,826.15 (0.93%)Rejected-AOC 64 A JASRAJ MANSION 1ST FLOOR OLD HANUMAN LANE KALBADEVI ROAD MUMBAI 400 002 | MUMBAI | MAHARASHTRA | 400002 | L2 | Rejected-AOC REJECTED | |
| 3 | L3₹19.6 L+₹33,556.65 (1.74%)Rejected-AOC 32 GRAND SQUARE DANAPUR CANTT PATNA PIN 801503 | PATNA | PATNA | BIHAR | 801503 | L3 | Rejected-AOC REJECTED | |
| 4 | L4₹20.8 L+₹1.5 L (7.90%)Rejected-AOC | L4 | Rejected-AOC REJECTED | |
| 5 | Rejected-Technical | - | Rejected-Technical No remark in WLR |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
20 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW BHANDUP
GE(NW) BAHDNUP, MUMBAI
CERTAIN REPAIRS TO MISC B/R INCLUDING PERIODICAL SERVICES AT INS TRATA (ERANGLE) UNDER GE(NW) BHANDUP
2022_MES_538864_1
8216/B
Open Tender
Civil Works
Item Rate
270 days
HAMLA
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(NW) BHANDUP
₹44,000
Yes
17 Nov 2022
18 Jul 2022
22 Aug 2022
18 Jul 2022
20 Aug 2022
6 Aug 2022
60 days
Amount
M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed.
M&L for preparation of old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots and thereafter applying one coat of white wash complete all as specified and directed.
M & L for preparation of old decorated plastered or unplastered surfaces of walls, cornices etc by washing down, brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moss effloresence salts and trading oil and greasy spots complete removal and applying one coat of cement base paint complete all as specified and directed .
M&L for preparation of old surfaces of walls including washing, rubbing down and stopping of distempered and painted surfaces of wall and applying one coat oil bound distemper with roller complete all as specified and directed.
M & L for complete removal of existing treatment by scrapping / washing down with water and applying two coats of oil bound distemper over a coat of primer, applying with roller complete all as specified and directed.
M & L for white cement based Wall care putty not less than 3 mm thick on wall/ceiling new or old surfaces of any description finished even and smooth complete all as specified and directed.
M&L for preparation of old decorated wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint. complete all as specified and directed.
M&L for preparation of old decorated steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of old surfaces of walls/slab projections by brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots including washing down,with water and applying one coat of 100% antifungal acrylic emulsion paint in approved shade etc all as per manufacturers instructions including necessary scaffoldings etc,complete all as specified and as directed.
M & L for cutting out cracks (not exc 5mm) to V-section in existing wall/chajjas and cleaning out and filling up with Dr fixit crack seal including necessary scaffoldings complete all as specified and as directed.
Taking down cement mortar of any description from stone or brick wall etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish materials out side MD and including necessary scaffoldings complete all as specified and directed.
M & L for Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 as in ceiling finishing even and smooth (with out using extra cement) etc complete all as specified and directed.
M & L for Rendering 20mm thick in (1:4) cm (in two coats (15+5mm) with both coats mixed with liquid water proofing compound, surface finished even and fair without using extra cement complete all as specified and directed. ( Note : WPC will be measured separately).
M&L for preparation of new plastered surfaces and applying three coats of cement base paint on wall complete all as specified and directed
M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling etc complete all as specified and directed
M & L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of alkali resistant primer using roller etc complete all as specified and directed.
M&L for Removal of plant growth by injection with chemical glyphospate solution ( 4 % conceneration ) @ 20ml or till refuse by cutting or injection in stem of plants or roots at 30mm. The area shall then be sprayed with solution 25ml glyphosphate ( 4% concent) dulited with 1 ltr of water. All roots / plants shall be removed completely and making good the distrubed surface and painted with cement base or acrylic paint all as directed by EIC.
Supply only polymer based liquid water proofing compound complete all as specified and directed.
Taking down chowkhats or frame with shutters (without taking off shutter from the frames) exceeding 1.5 sqm but n exc 4 sqm complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutter from the frames) not exceeding 1.5 Sq. M each complete all as specified and directed.
Taking down shutter of any description exc 1.00 but n exc 2.00 sqm each complete all as specified and directed.
Resecuring or easing & adjusting without taking down door shutter of any description exc 1.00 but n exc 2.00 Sqm each complete all as specified and directed.
Taking down door shutter of any description exc 1.00 but n exc 2.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws etc complete all as specified and directed.
Taking down door shutter of any description n exc 1.00 sqm each and refixing in the same opening after easing, adjusting & renewal of unserviceable screws as required etc complete all as specified and directed.
Dismantling of boarding ,any description and in any position complete all as specified and directed
M&L for Rotational moulded polyethylene water storage tanks (Cylindrical verticval with closed top) hoisted & fixed in position in repairs all as specified of 1000 ltrs capacity complete all as specified and directed..
M&L in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed complete .25mm dia complete all as specified and directed.
M&L for Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 20mm bore dia complete all as specified and directed
M&L for post construction anti- termite treatment along the external wall below concrete or masonary apron using chemical emulsion @2.25 liters per linear meter including drilling and plugging holes with cement mortar 1:2 to match the existng floor etc complete all as specified and directed.
M&L for post construction anti- termite of soil / concrete under existing floor along the floor and wall junction using chemical emulsion @ 1 liters per hole 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 to match the existing floor etc complete all as specified and directed.
M & L for post construction anti - termit treatment at points of contact of wood work using chemical emulsion (in oil or kerosin based solution ) @ 0.5 liters per hole by drilling 6 mm dia holes at a down ward angles of 45 degree at 150 mm centre to centre and sealing the same with white cement and making good to the existing surfaces etc complete all as specified and directed.
M&L for 18 to 20 mm thick machince cut polished Kota stone slab in single piece in jambs and in double piece in cills on vertical surfaces and over 15mm thick cement mortar 1:3 backing coat jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing and necessary edge moulding before fixing of kota stone complete.
S&F extruded Powder coated aluminium section as in window, ventilation,door (powder coated 50 micron in blackcolour) with movable, openable or fixed type shutter or any pattern as directed, aluminumsection medium weight of series B or size as directed by the Engr in charge cut to size , jointed toghter including rubber beading and all necessary fitting complete all as specfied and directed (Make: Jindal/Hindalco) Note :- (i) Only aluminum sections measured and paid in this item. (ii) Rate quoted by the contractor shall deemed to be inclusive of all necessary fittings and fixture such as roller,handle,locks etc (iii) Glass pane and XPM jali measured and paid under supply only rate.
S & F aluminium grill conforming to DG- 102 of Deco Grill or equivalent , (10mm X 5.2mm) thick of approved design or equivalent as approved by Accepting Officer and fixing with and including 'F/U' channel not less than 1.5mm thick and fixed in repairs complete all as specified and directed.
Supply only sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.
Supply & Fixing in repairs sheet glass 4.8 mm thick in glazing n exc 0.5 sqm each with rubber and aluminium beading/packing with rubber gasket complete as specified and directed.
Supply only aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.
S&F II nd class Hard Wood plain, solid straight chawkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, completed as specified and directed.
S&F MS float iron as in hold fast and similar work as specified Gde Fe 410-0 or Fe 310-0 complete all as specified and directed.
S&F 35mm thick IInd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged) fixed to chowkats etc complete all as specified and directed.
S&F 35mm II nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred bends for securing glass etc. size of members of shutters as specified in SSR, Part I, section -8, clause 8.20(a) supplied and fixed to chowkhats complete all as specified and directed.
M&L for Flush shutters 30mm, solid core construction, with partical board core and ply wood face panels, commercial type on both sides complete all as specified and directed.
Supply & Fixing in repairs aluminium anodised XPM Jali, 24 gauge with 1.4mm average width of aperature complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed
S&F stainless steel butt hinges 100mm size complete all as specirfied and directed.
S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. complete all as specirfied and directed.
S & F 150mm length extruded aluminium alloy handles,fabricated type, anodised complete all as specified and directed.
S&F 200mm length aluminium anodised barrel tower bolt of extruded section. complete all as specirfied and directed.
S&F aluminium alloy, anodised, sliding door of length 300mm, with hasp and staple (bolt type) and fixing clip of sheets, cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium alloy and fixed. complete all as specirfied and directed.
M&L PCC Block for hold fast and similar work etc 1 : 2 : 4 type B-1(using 20mm graded stone aggregate) complete all as specified and directed.
M&L preparing surfaces of wood or wood based materials, any description ends of posts, backs of chowkats, etc and treating with tar or coal tar black paint area tarred exc 0.1 sqm but n exc 0.5 sqm each complete all as specified and directed..
Preparing surfaces of small articles such as stop, covers, gully gratings, holdfasts, ends of posts, backs of chowkats etc area n exsc 0.1 sqm each and treating with tar or coal tar black paint complete all as specified and directed.
M&L for preparation of new wood and wood based surfaes any description, not otherwise described oer 10cm width or girth one coat of pink primer and application of two coats of synthetic enamel paint on new wooden surfaces.
Demolition of brick work or stone / boulder masonry, built in cement or lime mortar including all quoints, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L Brick work with sub class 'B' old size bricks, built in CM 1 : 6, straight or curved on plan exc 6m mean radius on plan complete all as specified and directed.
M&L connector PVC 450mm long complete all as specified and directed.
Dismantling floor, hearth or wall tiling any description and thickness including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and directed.
M&L PCC 20mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed..
M&L for non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.
M&L for glazed ceramic jointless coloured tiles in vertical surface 300x200x7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.
M&L for non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.
Machine cut Kota stone slab flooring 20-25mm thick over and including provision of screed bed 20mm thick in CM 1 : 6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete all as specified and directed.
S&F pvc cabinet mirror in repairs of size 600X450 mm complete all as specfied and directed.
M&L for Glass Assembly sheet glass consisting of 5.5mm thick sheet glass 12cm wide with chromium plated bracked guard and railing 60cm long in repairs complete all as specified and directed..
M&L soap dish CP and fixed in repairs.complete all as specified and directed.
Demolition of cement concrete in ground floor / paving not exceeding 15Cm thick below or above GL unreinforced complete all as specified .
M&L for cement concrete type C-1, 1:3:6 (20 mm graded aggregate) 75 mm thick as in plinth protection finished even and smooth without using extra cement complete all as specified and directed.
M&L plain cement concrete type B2, 1 : 2 : 4, 100mm thick (using 40mm graded aggregate) finished even and fair without using extra cement complete all as specified and directed.
S & F Tubular towel rail / curtain rod 20mm dia Aluminium anodised & fixed in repairs complete all as specified and directed.
S&F in repairs Aluminium brackets for tubular towel rail 20mm dia complete all as specified and directed.
Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed.
All as per item no.74 above but 20mm bore of pipe complete all as specified and directed..
M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia.
All as per item no.76 above but 20mm bore dia complete all as specified and directed.
M&L for Wash basin, Vitreous China white (Flat back) 630 x 450mm including brackets, pinning in ends of brackets or erecting stand including supply and fix of waste pipe and fixing pillar tap etc ( Suppy of pillar tap shall be measured separately) complete all as specified and directed.
Supply only pillar tap cast copper alloy chromium plated fancy type complete all as specified and directed. .
M&L for stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.
All as per item No.80 above but angle cock Chromium plated 15mm bore dia complete all as specified and directed.
M&L bib tap brass 15mm bore dia chromium plated long shank fancy type with curtch or butterfly handle , screwed down, screwed for iron pipes complete in repairs complete all as specified and directed.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm
M & L for Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 32mm dia complete all as specified and directed.
M & L for Low density polyethlene (LDPE) pipe of pressure rating 6 Kgf / Sqcm 40 mm dia complete all as specified and directed.
Carrying out maintenance of entire sewage system of Erangle (INS TRATA) area by cleaning of sewage line of dia. not exc. 150mm, 200mm and 300mm including blocked manholes by rodding from manholes and well flushing after cleaning and removal of blocked/decomposed sludge/dirt and other materials out side MD land in closed container including removing and re-fixing manhole covers without damaging, cleaning/removal of blockages in trap of kitchen, bath and WC, etc. complete as and when required basis, all as specified and as directed by Engineer-in-Charge. Note :- (a) Sludge/de-composed materials obtained from cleaning shall be removed outside MD land by mechnical sewage cleaning tankers. (b) Rate inclusive of clearing away all grass vegetation, saplings shurbs and trees not exceeding 30 cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance of 50 mtrs outside the periphery of the area. (c) Two safaiwala and one mazdoor shall be detailed daily for Erangle area for the purpose of rendering the entire sewage system functional through out the contract period. In case of failure compensation will be recovered as specified in respective PS Clause. (d) In case of blockage of sewage system the complaint shall be rectified within three hours from the time of intimation. (e) The rates quoted shall be deemed for attending day to day complaint basis and make functional the entire sewage system for the period of one month at Erangle area.
Cleaning of septic tank including filter bed by bailing out fluid, decomposed materials sludge etc. scraping and washing the wall with fresh water and disposal of decomposed materials, sludge etc. outside MD land for 100 users septic tank complete all as directed by Engineer-in-Charge. Note 1 - Sludge / de-composed materials obtained from cleaning shall be removed outside MD land by mechnical sewage cleaning tankers. Note 2 - Rate inclusive of clearing away all grass vetetation, saplings shurbs and trees not exceeding 30 cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance of 50 mtrs outside the periphery of the area.
All as per item No. 87 above but for 50 users septic tank complete all as directed by Engineer-in-Charge.
Dewatering from septic tank by using mechanical pump set and discharging for disposal out side the MD land and spreading required bleaching powder over the area all as specified and directed
Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed.
M&L for RCC 1 : 2 : 4 type B-1 (using 20mm graded aggregate) for cover slab including necessary form work and set in cment mortar 1 : 4, complete all as specified and directed.
M&L for form work to sides & soffit of roof beams / top beams rough finished surface of concrete complete all as specified.
M & L for TMT bar 10mm dia and over, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed confirmed to Fe 410-0 complete all as specified and directed.
M & L for TMT bar 6 to 8mm dia, cut to length, bent to shape required including cranking bending, spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed confirmed to Fe 410-0 complete all as specified and directed.
Exavating in trenches n. exe 1.5 m wide and n. exe 1.5 m in depth, for foundation etc or for shafts, wells, cess pits, man holes, pier holes etc n exe 10 sq m on plan and getting in hard dense soil complete all as specified and directed
S & F 150mm bore salt glazed stone ware drain pipes laid in trenches and jointed as specfied complete all as specfied and directed.
M&L for concrete in cement concrete 1:3:6 type C2 to bed drain pipes of 150 mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specfied and directed.
Returning, filling in, including spreading, levelling, watering and well raming in layer not exe 25cm complete as specified and directed.
Removing exavated material outside MD land exe 1.50km but n. exe 5km and depositing where directed complete as specified and directed.
Cutting into existing man holes for connecting new drains of 150mm dia pipe and making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 and finished and reforming benching as required complete all as specified and directed.
Demolition of cement concrete in ground floor / paving not exceeding 15 cm thick below or above GL unreinforced complete all as specified .
M&L bitumastic filling the joint of 10mm wide and 100mm depth comprising of one part of heated bitumen blown grade (85/25) any penetration and 2 part of sand by weight all as specified and directed.
Dismantling of posts or struts (wood, steel or RCC ) any section including taking out embeded portion and making good distrubed ground on concrete , brick work, masonry etc and removing of demolished materials out side MD land complete all as specified and directed.
Dismantling of fencing wire mesh any type and size complete all as specified and directed.
Excavation in post holes (or similar holes) each n exc 0.5 cum and getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n exc 25cm, watering and removing surplus soil to a distance n exc 50m and making good surface in hard / dense soil complete all as specified and directed.
M&L for cement concrete type C-2 , 1 : 3 : 6 (using 40mm graded stone aggregate) in foundation and filling concrete for columns, fencing posts etc complete all as specified and directed.
S& F Mild steel angle iron cut to shape as directed drilling holes notching for wire as in posts and struts in fencing etc including all necessary cutting and welding etc and for similar work complete all as specified.
S&F for mild steel screw bolts (machine cut) with hexagonal or square heads at one end and srewed the other or screwed both ends each screwed end to be fitted wth washers and one hexagonal or square nut, not exceeding 5 cm long and diameter of neck 5 to 10mm complete all as specified and directed.
M&L for PVC coated chain link fencing, size n exc 40mm x 40mm The dia of GI wire shall be 2.5mm to 3mm and thickness of PVC shall be 1mm to 1.5mm fixed to the posts complete all as specified and directed.
M & L for Preparation of new or previously untreated surface and applying two coats of synthetic enamel paint over a coat of red oxide on steel surfaces all as specified.
M&L for walling or random rubble , uncoursed well bonded, bedded and solidly, hearted built in CM 1:6 etc complete all as specified and directed.
All as per item No.111 above but except stones including removal of mortar, cleaning with water etc complete all as specified and as directed by the engineer-in-charge. Note : Old stone obtained under Item above shall be re-used under the subject items
M & L for rendering 15 mm thick on fair faces of brick/concrete surfaces in CM 1:4 finished even and fair complete all as specified and directed.
M&L for providing plain cement concrete 1:3:6 type C-1(using 20mm graded stone aggregate) in coping including weathering, slightly rounded or chamfered angle and throating as directed including necessary form work complete all as specified and directed.
M&L for Hammer dressing to face stones with maximum depression on fair face from straight edge held against the dressed surface not exceeding 40 mm for granite or trap stone of face beds & joints as specified of random rubble walling uncoursed or brought upto course complete all as specified Note :- Hidden portion of masonry shall not be hammer dressed
M&L for Racking out joints/pointing to randum rubble or poly gonal rubble uncoursed or brought upto courses buil in cement mortar 1:4 complete all as specified and directed.
M&L for Raised pointing to randum rubble or polygonal rubble uncoursed or brought upto courses built in cement mortar and pointing to RR masonry with CM 1:4 complete all as specified and directed.
M & L for cement concrete 100mm thick type C1, 1 : 2 : 4 ( using 20mm graded stone aggregate) as in drain, floor etc and finishing even and smooth without using complete all as specified and directed.extra cement.
Dismantling wrought iron or mild steel work of any description specifically provided for gates, staircase railings, framed truss etc complete all as specified and directed.
M&L Mild framed works such as angles, tees , channels, etc as in fenching posts large and small gates and grills , gratings and chainlink fenching etc, including hanging gates in pillar with proper pintle hinges, stops, hand made sliding bolts ,etc complete.
S&F in repairs of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed
Restraining & resecuring of Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacing and fixing to any of standard rails straining bolts, includig securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed
S&F in repairs of razer type concenrtina coil,9SWG hot galvanised spring tensile wire 145 to 150 newton per square mm, zinc coating 250-300 gram per sqm ,dia of coil when unstretched 610mm minmum no of coils 10 per RM after laying hot dip galvanised razer ribbon tape of size 0.50 mm thick 19mm wide before wrapping of central corewire fixed with 1.66mm thick GI clips 25 nos per running meter and special nut bolts ,hold 'z' coil together and extrra two rows parrel wire of 10 gauge complete all as specified and directed by the EIC and Dismantling of razer type concertina coil with two parallel rows of wire remove of the debris outside MD land complete all as specified and directed by EIC
M&L PCC 1 : 2 : 4 type B1 (using 20mm graded stone aggregate) 100mm thick for sub base in floor complete all as specified and direced.
Chequered cement concrete tile 20CM x 20CM x 25mm thick with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including cement mortar bedding 20mm thick in CM 1 :4 complete all as specified and directed..
Demolition of of stone slabs in floors etc any thickness complete all as specified and directed.
M&L for crushed sand filling under floors or in foundations including watered and consolidation complete all as specfied and directed
M&Lfor Machine pressed precast concrete inter locking paver blocks of any shape and size conforming to IS 15658- 2006 of 60 mm thick M-35 grade with grey cement and pigment with glosey finish and including removing the existing paver blocks including removing of debries out side MD land complete all as specified and directed..
M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates Fe410 gde E-250 quality A, etc complete all as specified and directed.
M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) Fe410 gde E-250 quality B including distance pieces, cleats etc complete all as specified and directed.
S &F galvalume aluminium zinc coating corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed by Engr-In-Charge.
Taking down copper/aluminium point wiring (light, fan,bell, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as specified and directed.
Taking down of existing Ceiling fan/exhaust fan of any sweep size AC single phase 230 Volt and deposting the same to MES store yard complete all as specified and directed
M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light point/fan/bell point controlled by one one way switch, complete all as specified and directed
All as per item No 134 above but for one 5 pin socket 5 Amps on same board complete all as specified and directed
All as per item No 134 above but for one 5 pin socket outlet 05 Amp independent board complete all as specified and directed
M & L for point wiring complete with proper colour coding using 1100 volts grade, 2.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with the existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc. also inclduifng 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one 5Pin,6/16Amps,Socket outlet independent,complete all as specified and directed
Supply & fixing ceiling rose , polycorbanate material 3 terminal complete all as specified and directed.
Supply & fixing switch modular type 6 Amp single pole one way 230V complete all as specified and directed.
Supply & fixing switch modular type 16 Amp single pole one way 230V complete all as specified and directed.
Supply & fixing socket modular type 6 Amp 2/3 pin single pole one way 230 V complete all as specified and directed.
Supply & fixing socket modular type 16 Amp 2/3 pin single pole one way 230 V complete all as specified and directed.
Supply & fixing Modular white cover plate with frame 8 Module complete all as specified and directed.
Supply & fixing Modular white cover plate with frame 3 Module complete all as specified and directed.
Supply & fixing modular Metal Flush box 8 Module complete all as specified and directed.
Supply & fixing modular Metal Flush box 3 Module complete all as specified and directed.
Supply and fixing in replacement of integrated sleek extruded LED channel with acrylic cover 20 watt with white light including with driver and prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and directed.
Supply and fixing in Replacement Of LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple opti The rate quoted by contractor shall liable to Fix Supporting GI pipe 25mm Size with 45 degree angle Bend fixing on walls with clamps and nut bolts etc. complete all as specified and directed by the Engr-in-Charge.
Supply and fixing in Replacement of integrated sleek extruded LED indoor wall light 10 watt with driver and preqired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.
Supply and fixing in Replacement of integrated sleek extruded LED indoor wall light 10 watt with driver and preqired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.
Supply and fixing in Replacement of integrated sleek extruded LED indoor indirect light 12 watt with driver and preqired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.
Supply and fixing in Replacement of LED indoor hanging light with LED pin type lamp warm white 14 watt with preqired complete including flexible wire connecting from ceiling rose complete all as specified and difected.
Supply and fix in replacement of Decorative LED Post-Top solar gate light 5 watt made in cast aluminium spigot housing with decorative opal diffuser and IP 65 protection complete and taking down existing unserviceable pot top lantern completeall as specified and directed.
Supply and fix sheet metal enclosure powder coated for MCB DB SPN 4 way double door type with din rail and bus bar including making good to the disturbed surface matching with the existing complete all as specified and directed.
Supply and fix of MCB SPN 240 Volts 32 Amp breaking capacity 10 KA rating complete all as specified.
Supply and fix of MCB SP 240 Volts 6 to 32 Amps breaking capacity 10 KA rating complete all as specified and directed.
Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces complete all as specified and directed.
M&L for sub main wiring complete Two run of size 1.5 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed.(For Building security Lights) Note: Three run 1.5 Sqmm, PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.
M&L for sub main wiring complete Three run of size 2.5 sqmm PVC insulated ,unsheathed, heavy duty 1100 volts grade (FRLS) multi-stranded copper conductor cable ,drawn partly in and including PVC casing caping fixed on the surfaces of RCC slab/ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also including one run of 2.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts multi-stranded copper conductor green colour as continous earth wire connected to common earth dolly and mains, complete all as specified and directed. Note: Four run 2.5 Sqmm, PVC cable and one run of Casing Caping & conduit will be measured as "one unit"length.
Supply & fix exhaust fan 300 mm sweep, 900 rpm, 230V complete with louvers, steel body, bolts, nuts, washers, suitably embedded in wall(include wall cutting for hole) with provisioning of 23/0.0076 flexible three core wire for electrical connections from ceiling rose to fan all as specified and directed.(Sailors Bathroom-1, Common Toilet -1)
Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth lead wire 4.0 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 3 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.
Deduct Credit for Demolished/ Dismantled material Rs. (-)36632.20 (Minus) as listed in Schedule of Credit Note: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
M/s Mukesh Engineers
M/S Kumar Enterprises
PANKAJ AND BROTHERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .