8501 SPECIAL REPAIRS TO BLDG NO 5 CROSS ROAD IVORY HOUSE AND LIGHTING ARRANGEMENT IN CONF HALL BLDG NO P 74 UNDER AGE BR II OF GE SOUTH PUNE

Amount

Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed

Dismantling of plain or corrugated steel sheeting any gauge / thickness in roof covering etc, complete all as specified and directed.

Dismantling of plain or corrugated AC sheet any gauge / thickness in roof covering etc, complete all as specified and directed.

Dismantling of battens for tiles shingles etc of any size includingtiling fillets exc 15 cm spacing etc complete all as specified & directed.

Dismantling timber scantlings, 40 Sqcm over in section in any position, fixed with nails unframed work, complete all as specified and directed.

Dismantling timber scantlings, fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section fixed in any position fixed with nails unframed work, complete all as specified and directed.

Dismantling boarding as in wooden ceiling of any description, fixed in any position with nails, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet tile profile roof sheet 0.50mm thick, AZ-70 of any colour having tensile strength of 240 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as of roof covering / ridges fixed with self tapping screws, complete all as specified and directed.

M&L for structural steel work, rolled mild steel as in joist, channel, angle, steel square tubing or Tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

S&F rolled mild steel as in roof trusses (framed) trussed, purlins, crane gantries, rails and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or flat section) including distance pieces, cleats etc. conforming to IS 1161-1979 gde ST 240, complete all as specified and directed.

Supply & fixing rolled section as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of etc. confirming to Fe-410-W (Gde-E-250) Quality-A, complete all as specified and directed.

Taking down steel chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down steel chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down wooden chowkhat or frames n. exc. 1.5 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

Taking down wooden chowkhat or frames exc. 1.5 sqm but n. exc. 4 sqm each with shutter without taking off shutter from the frame complete all as specified and directed.

M&L for preparation of old painted wooden surfaces exc 10 cm width or girth and applying two coat of synthetic enamel paint, complete all as specified and directed.

M&L for preparation of old painted steel surfaces exc. 10 cm width or girth and applying two coats of aluminium paint, complete all as specified and directed.

M&L for french polishing on surfaces of any description, width or girth including cleaning and preparation of surfaces including a coat of wood filler on old work with one or more coats, complete all as specified and directed.

M&L for Natural Teak Wood finish on Surfaces from Old painted door/window surface by applying the following steps, complete all as specified and as directed.:- (a) Clean the Wooden door surface with damp cloth. (b) Apply paint stripper / gel and after 5-10 minutes scrapping off with a putty knife or blade or Use foaming oven cleaner to remove completely old paint. (c) Use 60-grit sandpaper with an orbital sander on the wooden surface (d) Again, use 60-grit sandpaper with a mouse sander to get the corners clean. (e) Use a stiff-bristled brush to dust all the leftover sand or dust off the fine dust and use a damp cloth or rag to wipe the piece down. (f) Use Clear Wax on the wooden surface complete all as specified and as directed. Note : This item includes the prices of all the steps which are required in lieu of above mentioed steps to achieve natural teak wood finish from the old painted surface.

Preparing old painted wooden surfaces of any description, n.exc 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

M& L for two coats of wall care putty, level and smoothen the surface and cure the first coat lightly once it dries apply the second coat of 0.5-1 mm thickness once the first coat is fully dried and set. The thickness of each coat should not exceed 1mm and total thickness of putty should not be less than 1.5mm, complete all as specified and directed.

Taking down shutters of any description exc. 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S & F 105 mm X 60 mm size pressed steel frames made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including filled hollow portion with PCC 1:3:6 type C-0, complete all as specified and as directed.

S & F 125 mm X 60 mm size pressed steel frames made out of 1.25mm thick mild steel sheets for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including filled hollow portion with PCC 1:3:6 type C-0, complete all as specified and as directed.

S & F Solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS tube, suppling and fixing in opening complete all as per specification and as directed by Engr-in-Charge

S&F factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M.S tubes for top & bottom rails; M.S frame shall be covered with heat moulded plain colour PVC ‘C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification and drawing as per product Drg given in SSR Part-II 2020 Refer item No. 8080 as specified and directed by Engr-in-charge.

S&F butt hinges 100mm medium weight cold rolled, mild steel, complete all as specified and directed.

S&F aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed.

S&F in repair aluminium anodised barrel tower bolt 200mm legth of excluded section and fixed, complete all as specified and directed.

S&F Aluminium handle cast type, anodised 200mm, complete all as specified and directed.

M&L for prepration of new or previously untreated steel surface and apply two coats synthetic enamelled paint over one coat of red oxide primer of any descriptiion, not otherwise described over 10cm width or girth, complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete al as specified and directed.

M&L for Vitrified Ceramic tiles 10 mm thick of size 600 x 600mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) including demolition of old existing unserviceable tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and as directed.

M & L for Non skid joint free ceramic coloured (dark shade) tiles of size 300mm x 300mm x 7 to 8mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) including demolition of old existing unserviceable tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge.

M & L for glazed colour ceramic tiles of size 300mm x600mm x 7 to 8mm thick as in skirting / dado, laid over and including 10 mm thick CM (1:4) backing coat, set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles, including triangular filleting in cm 1:4 on top edges, including demolition of old existing unserviceable plaster / tiles of any description or thickness laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge.

M&L for 25 mm thick concrete 1:2:4, type B0 using 12.50 mm graded stone aggregate as in floor leveling course etc.including demolition of cement concrete, complete all as specified and directed.

M & L for granite 18-20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, Door cills ,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 15mm thick screed bed in CM (1:6) including dismantling of old unserviceable stone slabs or tiles of any description or thickness, complete all as specified and directed.

Rounding to edges of stone slab one edge, such as in steps, cooking platform and other similar situations, complete all as specified and directed.

M&L for machine cut cuddappa stone 20 to 22 mm thick both side polished bedded & jointed in CM 1:3, laid over and including 15mm thick screed bed in CM (1:6) including dismantling of old stone slabs and tiles of any description or thickness, complete all as specified and directed.

M&L for cement concrete type B1, 1:2:4 (Using 20 mm graded crushed stone aggregate) as in coping, coving, edging etc including necessary form work including demolition of existing cement concrete. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick / stone / concrete surfaces with sagol finish including taking down of old existing cement plaster , complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick / stone / concrete surfaces with sponge finish including taking down of old existing cement plaster complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick / stone / concrete surfaces with sponge finish, complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) including demolition of old existing brick work, solid block or stone masonry built in cement mortar or cement lime mortar complete all as specified & directed.

M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick / concrete / stone surfaces with sagol finish cement plaster complete all as specified and as directed.

M&L for complete removal of existing treatment on wall and applying two coast of oil bound distemper over a coat of alkali resistence primer, white or tinted on wall complete all as speficied and directed.

M&L for complete removel of existing treatment of walls by scrapping, cleaning by water jet, soffits / facia of chajja / roof slab etc and Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as speficied and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as speficied and directed.

M&L for prepration of newly plastered sureface and applying two coats oil bound distemper complete all as specified and as directed.

M & L for 15 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable steel tubing and connections, complete all as specified and directed.

M & L for 20 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable steel tubing and connections, complete all as specified and directed.

M & L for 25 mm bore GI tubing medium grade including with all fitting & fixtures, fixed on walls and ceilings or laid in floors etc including taking up or down of old unserviceable steel tubing and connections, complete all as specified and directed.

S&F rotational moulded polyethylene water storage tank 1000 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including 20 mm ball valve high pressure PTMT with rod & high density plastic ball and tank nipple of suitable size / dia including dismantling of old unserviceable existing water tank and removing to store, complete all as specified and directed by Engineer-in-Charge.

S&F rotational moulded polyethylene water storage tank 500 Litres capacity ISI marked (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I with and including 20 mm ball valve high pressure PTMT with rod & high density plastic ball and tank nipple of suitable size / dia including dismantling of old unserviceable existing water tank and removing to store, complete all as specified and directed by Engineer-in-Charge.

S&F IInd class hard wood 35mm thick factory made, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneer particle board with commercial veneering on both faces. The size of the rail as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F IInd class hard wood 35mm thick factory made, glazed and skeleton shutter open rebated and prepared to receive glass gauge etc edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. The size of the rail and stile as per IS 1003 (Part-I), Kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F high density 40mm bore polythylene pipes (HDPE) of pressure rating 6 kg/cm2 , laid under floors with necessary socket, elbo & bend etc complete all as complete and directed.

S&F Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed (Al die cast body) and fixed in repairs, complete all as specified and directed.

S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up old unserviceable existing drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including demolition & breaking up old unserviceable existing drain pipes PVC or AC set in CM or solvent, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 110 mm bore provided with access door, complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius 75 mm bore provided with access door, complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore, complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore, complete all as specified and directed.

M & L for PVC (SWR) floor trap, dia of outlet 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed.

S&F brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and as directed.

S&F aluminium powder coated three track sliding window with two shutters of 4mm thick tinted glass of modigaurd and one shutter of stainless steel wire mesh including good quality of bearing handle, locks, PVC rubber lining etc by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge :- Three track bottom – 20957, Three track top/vertical – 20958, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated two track sliding window with two shutters of 4mm thick tinted glass of modigaurd including good quality of bearing handle, locks, PVC rubber lining etc by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge:- Two track bottom – 20956, Two track top/vertical – 21432, Handle – 20606, Interlocking – 20605, Top and bottom – 20604.

S&F aluminium powder coated ventilator with moveable louvers including 100mm wide pinheaded glass strip by using following sections of using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge (a) Frame - 20048 (b) Glazing clip - 19352

M&L for aluminium powder coated louvered ventilator with provision of suitable space for fixing of exhaust fan including 100mm wide pinheaded glass strip by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge:- Frame - 20048 Glazing Clip - 19352

S&F Aluminium powder coated single leaf door on pivots alongwith hydraulic door closer door lock , handle,5mm th plane glass fixed with rubber beading in top panel and glazing clips MS clamps and 12mm th laminated particle board as bottom pannel both side laminated) by using following aluminium powder coated sections conforming to catalogue of 'JINDAL' or of equivalent make complete all as specified directed by Engr-in-Charge:- (a) Rectangular tube - 14005 (b) Vertical rail - 19501 (c) Top rail -19503 (d) Middle rail -20060 (e) Bottom rail- 19511

S & F Aluminium anodised Powder coating of ivory / brown colour frame / shutters for windows / doors / Ventilator with one or more rebates including joining cleat, glazing clips, anodised aluminium snap beading for fixing, screws, anodised aluminium fittings such as peg stays, handle etc complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495mm x420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

S&F salt grazed stone ware gully traps, square 150x150 size fixed in repairs, complete all as specified and directed

S&F 320mm dia UPVC rain water gutter (320mm height) including fittings such as end drop, running drop etc, complete all as specified and as directed.

S&F straps, supports or suspenders, hooks for hanging fans , MS Plates, nut bolts, hold fast , clamps ,hooks and similar small article etc. confirming to Fe 290 & Gde E-165, complete all as specified and directed

S&F Stainless Steel 304 grade Silver finish curtain rod, 25 mm bore, medium weight complete all as specified & directed. Make : Herrlich Homes or equivalent

S&F Steel Chrome Finish Alloy Zinc Solid Jointless heavy Rod Curtain bracket and bracket Accessories for Door and Window etc complete all as specified and as directed. Make : WKS Cat Part No S123-001, 1 incch or equivalent.

M&L Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, including dismantling of old unserviceable wall / ceiling boards of any thickness including cover fillets complete all as specified and directed. Note-1 : Design and pattern of ceiling shall be as approved by Engineer-in-Charge.

S&F 8 mm thick seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous & calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling & tapping screws having Phillips head with under head cutter at 200 mm C/C including finishing the joint of face board with specially formulated jointing compound & 48 mm wide fibre tape to provide seam less finish ( Frame work for ceiling shall be measured & paid separately) complete all as specified and directed. (Note-1 : Cost of making frame work for light fittings/ grills/ diffusers and cutting to shape in ceiling etc shall be deemed to be included in the quoted rate of item.)

M&L for Gypsum ceiling board for ceiling prepainted, perforated finish, 600 x 600 x 9 to 9.5mm thick in size, of approved brand/make, laid over and including grid work of size 600 x 600mm, made out of 0.5mm thick G.I. tee 32 x 24 mm for main, 25x24mm for cross tee and 20 x 20mm angle fixed on wall, powder coated finish on exposed faces of tee and angle. hung from ceiling using 2 mm thick G.I. Suspension wires spaced at 1200 mm on main runners including making niches for fans/light etc, incl taking down boarding/ceiling of any description, fixed in any position etc with nails, complete as specified and directed by engr-in-charge.

S&F POP designer Cornices of width 100mm with fixing arrangement complete all as specified and as directed.

S&F Single piece-WC with PP Seat cover, hinges, Fixing Accessories, Accessories set and cistern fittings complete all as specified and as directed. (Make : Jaquar of cat no CNS-WHT-853P180SPPSM or equivalent model in CERA clayton 2043, 2343, 2243 / PARRYWARE Aquiline C8919(P-180) or as approved by GE.

S&F in repairs Hand Shower( Health faucet) with 1.00mtr flexible tube and wall hook with N.R.V. (back flow prevented) complete all as specified & directed. Make Jaquar Product code ALD-CHR-565 / Parryware serene T9876A1 /Cera F8030401AB as approved by GE.

S&F Single lever Basin Mixer without popup waste with 600mm long Braided Hoses complete all as specified and directed. (Make : Jaquar Product code OPP-15005BPM /CERA GAYLE F1014452/Parryware G 3163A1 )as approved by GE.

S&F CP toilet paper holder confirming to CAT No ALD-CHR-1153S of "Jaquar" or Equivalent make as mentioned here in after, complete all as specified and directed.

S&F Soap dish confirming to CAT No ACN-WHM-1131N of "Jaquar" or Equivalent make as mentioned here in after, complete all as specified and directed.

S&F in repairs 2-Way Bib cock with Wall Flange complete all as specified & directed. Make : Jaquar Product code FUS-CHR-29041 or equivalent model in Kohler as approved by GE.

S&F brass chromium plated stop valve, fency type, 15 mm dia, complete all as specified and directed.

S&F Pillar taps, fancy type cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F in repairs, CP, fancy type bib cock with wall flange complete all as specified & directed. Make : Jaquar Product code OPP-15037PM or equivalent model in Kohler as approved by GE.

S&F Semi insert Counter top basin of Size 570x420x195mm complete all as specified & directed. Make : Jaquar Product code FLS-WHT-5601 or equivalent model in Kohler as approved by GE.

S&F Bottle trap (with internal Partition) 32mm size with 300 & 190mm Long wall connection pipes and wall flange complete all as specified & directed. Make : Jaquar Product code ALE-CHR-773ML300x190 or equivalent model in Kohler as approved by GE.

S&F Stainless Steel Nahani trap Square grating 5'' x 5'' with diameter of outlet 75mm. Ruhe 304 Grade Stainless Steel Product Code : 16-0307-15, complete all as specified and directed.

S&F in repairs Wall mixer with provision for Overhead Shower with 115mm long Bend pipe on Upperside, Connecting Legs & Wall Flange complete all as specified & directed. Make : Jaquar Product code FUS-29281 or equivalent model in Kohler as approved by GE.

S&F in repairs Overhead Shower 200x200mm Square Shape Single Flow (ABS Body Chrome plated with Gray face plate) with rubit cleaning system complete all as specified & directed. Make : Jaquar Product code OHS-CHR-35497 or equivalent model in Kohler as approved by GE.

Taking down carefully exising unserviceable point wiring of any type (light, fan, socket or power), complete (fitting such as switches,ceiling rose, pendent, regulators etc) for taking credit and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed.

Taking down carefully existing wooden board, main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out etc of any size, any capacity from boards and making good disturbed surfaces of wall, floor etc. complete all as specified and as directed.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in stone /brick wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- (a) One light / fan / exhaust fan point controlled by one, one way switch 5 Amps.

(b) One 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

(c) One 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

(d) One bell point controlled by one, bell switch 5 Amps

All as per item No. 105 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F for modular bell push modular 6 Amps single module, complete all as specified and directed.

Suply and fix for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply including removal of old unserviceable one complete all as specified and as directed

S & F Modular switch one way 6 Amps, 1 module, complete all as specified and directed.

S & F Modular switch one way 16 Amps, 1 module, with neon indicator, complete all as specified and directed.

S & F celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked , complete all as specified and directed.

S & F modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F Modular socket, 6 Amps, 2/3 pin combination 2 module, complete all as specified and directed.

S & F Modular socket, 6/16Amps, 2/3 pin combination 2 module, complete all as specified and directed.

S & F lamp holder, PVC/ Polycarbonate type with back plate suitable for batten/ slanting fittings, complete all as specified and directed.

S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangementsnd provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape and including taking down old unserviceable existing light fitting of any description complete all as directed by Engineer- in-charge. Make :- Bajaj / Philips / Wipro

S & F for LED 10 watts batten aluminium extruded with decorative end caps including removal old unserviceable T8 type light fitting complete all as specified and as directed. Make- Bajaj / Wipro or its equvalent make in Philips, Havells

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 100 amps rating & 16 KA breaking capacity MCCB is pre fitted at factory with and including cost of MCCB complete all as specified and by Engr-in-charge. Make:- L&T or equivalant make in Havells / Legrand

S & F sheet metal enclosure double door, SPN, suitable for distribution boards when MCB to be used having 200 Amp rated bus bar, 8 ways 230 V including recessed grouting in wall with PCC 1:2:4 type B-1 complete all as specified and as directed.

S & F sheet metal enclosure double door, SPN, suitable for distribution boards when MCB to be used having 200 Amp rated bus bar, 12 ways 230 V including recessed grouting in wall with PCC 1:2:4 type B-1 complete all as specified and as directed.

S & F MCB single pole, 6 to 32 Amp, 240 V, ‘C’ Series, 10 KA, 50 Hz, complete all as specified and as directed.

S & F MCB, SPN, 40 to 63 Amp, 240 V, ‘C’ Series, 10 KA, 50 Hz, complete all as specified and as directed.

M&L for earthing complete with galvanised steel earth plate electrode including necessary excavation and earth work in any type of soil with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.50 m below normal ground level connected to with and including earth lead of 4 mm dia GI wire up to 7.50m by means of bolts nuts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.3 of MES SSR Part-I(2009) connected to main switch board or main control board all as specified and testing on completion with & including provision of earth wire protected by galvanised iron 15 mm dia light grade pipe up 7.50m and watering pipe shall be 20 mm bore medium grade with and including concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab in RCC (1:2:4) type B-1 using 20 mm graded stone aggregate duly reinforced with 8 mm TMT bars @100mm C/C on both sides with suitable cast iron lifting handle, GI earthing wire shall be encased in and including 15mm nominal bore GI 'light grade' tubing with all fittings from earth plate up to panel / DBs shall be provided & charcoal / salt funnel & other fittings etc. complete all as specified and as directed. Note :- (i) Unit rates includes the cost of 7.50 m 4mm dia GI earth wire & GI pipe for protection of GI earth wire for each earthing.

S&F exhaust fan made out of sturdy engineering plastic complete with louvres shutter, voltage 230V, 50Hz, RPM 1200 copper winding of sweep 250 mm sweep, 230V AC complete all as specified and directed

S & F wall mounted LED 20 watts , LED batten for surface and pendant application, Anodized extruded aluminium housing, high transmissitivity diffuser and high lumen output, 230 volts etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make Bajaj or its equavalent make in Philips, Wipro, Havells.

S&F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and including provosion of LED bulb 10/11 watts complete all as specified and as directed. Make- Havells Cat part No -LHGLO6160099 or its equivalent CAT part in Wipro, Philips, Bajaj

M&L for taking down ceiling fan of any size/sweep after disconnection the wire from existing ceiling rose and refixing the same after cleaning dust, oiling greasing Painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc including provinding flexible three core wire of size 23/.0076 from ceiling rose to connector of fan complete all as specified and as directed.

M&L for dismentling and taking down old unserviceable meter box of any type any size and making good with disturbed surface by filling of bricks works and cement plaster including of two coat of cement base paint and replacement with new one electric meter box suitable for three phase electric meter with and including MCB, TPN, 40 amps made out of two mm thick CRCA, MS sheet with transparant door for meter reading complete all as all as specified and as directed by Engr-in-charge.

S & F metal body exhaust fan, AC single phase, heavy duty, turbo force 240 V of size 300 mm sweep with louvers including necessary connection and replacement of flexible copper cable from ceiling rose and taking down of old unserviceable exhaust fan complete all as specified and as directed. Make Bajaj or equivalent make in Crompton / Havells

Excavating in trenches not exceeding 1.5 meter in wide and not exceeding 1.5 meter depth and getting out in hard/Dense soil complete all as specified and as directed

Material and labour for sand cushioning with dry river sand in trenches for cushioning of underground cable line including spreading, leveling, well ramming etc completed all as specified and directed.

Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality laid dry in trenches for protection of underground cable all as directed

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm complete all specified and as directed.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and as directed.

S&F galvanised iron tubing, 50 mm dia, light grade, including with all fittings & fixtures, laid in trenches, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35.0 sq mm 4 core, complete all as specified and as directed.

M & L for cutting and making a hole into or through cement concrete or stone masonary wall of thickness upto 45 Cm and in grith n.exc. 45 cm for fixing exhaust fan of size 300 mm sweep and providing fastners grouted in wall, 04 nos. inside for fixing of exhaust fan and 04 nos. outside for louvers and re-dressing the surface and making good with cement plaster 1:4 to match with existing surface including white wash complete alll as specified and directed by Engr-in-Charge.

M&L for laying of Reinforced concrete pipes, class NP2 with one collar per lengh of pipe of dia 100 mm, 2 nos half round ( for bottom and top ) and before laying excavated area shall be levelled all as specified and directed Engr-in-charge.

S&F industrial metal clad socket 2P+1N complete with metal clad 3 pin top with and including MCB, SP, 32A in sheet metal enclosure, complete all as specified and as directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size , complete all as specified and as directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency with PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed.

S&F LED bed side lamps with adjustable shades 5 watt, complete all as specified and as directed.

S&F LED post top lantern made in cast aluminium with decorative opal polycarbonate diffuser and IP65 Protection Model BGCS 40W LED WH, 5700K, complete all as specified and as directed. Make:- Bajaj or equivalent make in Havells / Crompton

S&F LED bollards with opal acrylic diffuser and IP66 protection Model BGBOL 605 LED WH of Make Bajaj or equivalent cat part in Havells/Crompton make, complete all as specified and as directed.

Dismentling of old un-serviceable post top lanterns and bollards from PCC and keeping the same in store, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 4 core, complete all as specified and as directed.

Disconnection of electric supply and removal of old un-serviceable cables from trenches, wall or floor, complete all as specified and as directed.

M & L Point wiring with 1.5 sqmm, single core, PVC insulated and PVC unsheathed FRLS cable, 1100 volts grade IS -694 marked, with multistranded copper conductors and earth continuity wire with 1.5 Sqmm cable (incl connecting to earth dolly) laid/fixed in and including concealed in pvcrigid conduit on walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for One light/fan/exhaust fan point controlled by one number one way 5 Amp switch, complete all as specified and as directed.

All as per item serial No.148 here-in-before but One 3 pin socket outlet 5 amps on the same board with other switches, complete all as specified and as directed.

All as per item serial No.148 here-in-before but One socket outlet 3 pin 5 Amp on independent board, complete all as specified and as directed.

All as per item serial No.148 here-in-before but with 4.0 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board, complete all as specified and as directed.

S&F switch flush type 5 Amp 240 Volts single one way (ISI marked), complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 Pin 5 Amp flush type 240 volts, complete all as specified and as directed.

S&F switch 15 Amp one way flush type, complete all as specified and as directed.

S&F switch socket combination 5 in 1, 5A/16A amp flush type, complete all as specified and as directed.

S&F ceiling rose, 3 terminal / PVC / polycarbonate, isolated body, complete all as specified and as directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, complete all as specified and as directed.

S&F 20mm dia rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc., complete all as specified and as directed.

Cutting chases, pinning in, concrete block walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting exc. 10 & n. exc. 20cm girth, complete all as specified and directed.

S& F Junction boxes (1 to 4 way), complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit of suitable dia including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire including dismantling of old unserviceable sub main wiring complete all as specified and as directed. Note:- Two runs of 6.0 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit of suitable dia including one run of PVC insulated 4 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire, including dismantling of old unserviceable sub main wiring, complete all as specified and as directed. Note:- Two runs of 4 sqmm cable, one run of 4 sqmm cable and one run of PVC conduit shall be measured as one unit length.

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit of suitable dia including two single core of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire, including dismantling of old unserviceable sub main wiring, complete all as specified and as directed. Note:- Four runs of 6 sqmm cable, two run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length.

S&F vertical DB, 4 way, TPN, double door, recess mounted/wall mounted MCCB's as incomer is 3 pole V- Tec of 100 amps rating & 16 KA breaking capacity, MCCB shall be pre-fitted at factory with and including cost of MCCB etc., complete all as specified and by Engr-in-charge.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 2.5 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit of suitable dia including one run of PVC insulated 2.5 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 2.5 sqmm cable, one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one unit length.

Gauri Associates

Agarwal Agencies

TULSAYA CONSTRUCTION

Suma Construction

SARATH ENTERPRISES

M/s.BAJRANG CONSTRUCTION