Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC ROOM NO 680 GANESH MURTY NAGAR PART NO 03 CAPT PRAKASH PETHE MARG COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹27.8 L+₹1.8 L (7.00%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L2 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 3 | L3₹29.2 L+₹3.2 L (12.1%)Rejected-Finance 0 0 0 NEAR DAK BUNGLOW NH 1 A NH 1A UDHAMPUR UDHAMPUR JAMMU KASHMIR 182101 | UDHAMPUR | JAMMU AND KASHMIR | 182101 | L3 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 4 | L4₹32.4 L+₹6.4 L (24.4%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance BEING OTHER THAN LOWEST | |
| 5 | L5₹34.3 L+₹8.3 L (31.7%)Rejected-Finance 9 9 CENTURY MILL 52 CHAL WARLI MUMBAI MAHARASHTRA 400018 | MUMBAI | MAHARASHTRA | 400018 | L5 | Rejected-Finance BEING OTHER THAN LOWEST |
| Sl No | Description | Qty | Unit | I.J Enterprises L8 | Unity Enterprises L6 | RAMESH ENTERPRISES L2 | JANKI ENTERPRISES L7 | SAHU AND SAHU CO. L4 | Shivam Enterprises L3 | B P ENTERPRISES L1 | ASHOKA TRADING CO. L5 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Enginner-in-Charge. | 180 | Each | 55 ₹9,900 | 50 ₹9,000 | 80 ₹14,400 | 100 ₹18,000 | 20 ₹3,600 | 10 ₹1,800 Lowest | 10 ₹1,800 Lowest | 30 ₹5,400 |
| 2.00 | S & F powder coated aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and locking arrangement etc complete all as specified and directed by Enginner-in-Charge. | 1,760 | Kg | 390 ₹6,86,400 | 415 ₹7,30,400 | 390 ₹6,86,400 | 400 ₹7,04,000 | 400 ₹7,04,000 | 400 ₹7,04,000 | 360 ₹6,33,600 Lowest | 380 ₹6,68,800 |
| 3.00 | S&F 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Enginner-in-Charge. | 8 | Sqm | 530 ₹4,240 | 600 ₹4,800 | 400 ₹3,200 | 800 ₹6,400 | 300 ₹2,400 Lowest | 400 ₹3,200 | 400 ₹3,200 | 600 ₹4,800 |
| 4.00 | S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Enginner-in-Charge. | 60 | Sqm | 510 ₹30,600 | 500 ₹30,000 | 350 ₹21,000 | 800 ₹48,000 | 300 ₹18,000 Lowest | 420 ₹25,200 | 400 ₹24,000 | 600 ₹36,000 |
| 5.00 | M&L aluminium anodised grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (80 x 66 mm aparture ) complete all as specified and directed by Enginner-in-Charge. | 80 | Sqm | 880 ₹70,400 | 950 ₹76,000 | 650 ₹52,000 Lowest | 800 ₹64,000 | 900 ₹72,000 | 750 ₹60,000 | 900 ₹72,000 | 950 ₹76,000 |
| 6.00 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge. | 900 | RM | 345 ₹3,10,500 | 385 ₹3,46,500 | 290 ₹2,61,000 | 350 ₹3,15,000 | 300 ₹2,70,000 | 350 ₹3,15,000 | 260 ₹2,34,000 Lowest | 350 ₹3,15,000 |
| 7.00 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge. | 240 | Sqm | 2,020 ₹4,84,800 | 2,100 ₹5,04,000 | 1,950 ₹4,68,000 | 2,300 ₹5,52,000 | 1,800 ₹4,32,000 | 1,200 ₹2,88,000 Lowest | 1,400 ₹3,36,000 | 2,250 ₹5,40,000 |
| 8.00 | S & F 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge | 600 | Each | 30 ₹18,000 Lowest | 32 ₹19,200 | 35 ₹21,000 | 30 ₹18,000 Lowest | 50 ₹30,000 | 35 ₹21,000 | 40 ₹24,000 | 40 ₹24,000 |
| 9.00 | S&F 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge. | 400 | Each | 80 ₹32,000 | 50 ₹20,000 | 40 ₹16,000 Lowest | 100 ₹40,000 | 60 ₹24,000 | 60 ₹24,000 | 40 ₹16,000 Lowest | 60 ₹24,000 |
| 10.00 | Taking down shutters of any description exc 2 sqm each with all fittings | 30 | Each | 40 ₹1,200 | 50 ₹1,500 | 70 ₹2,100 | 100 ₹3,000 | 20 ₹600 | 50 ₹1,500 | 10 ₹300 Lowest | 20 ₹600 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
18 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NAVY NAGAR COLABA MUMBAI
GE NW NAVY NAGAR COLABA MUMBAI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
REPAIRS TO ALUMINIUM WOODEN JOINERY PVC DOOR AND OTHER MISC BR WORKS AT OLD RS COLABA UNDER AGE BR II OF GE NW NAVY NAGAR
2025_MES_715936_1
8547/E8
Open Tender
Civil Works
Item Rate
270 days
GE NW NAVY NAGAR COLABA MUMBAI
Class D and Category (i)
8 documents required · 8 mandatory
₹500
GE NW NAVY NAGAR COLABA MUMBAI
₹90,000
13 Sept 2025
20 Jun 2025
21 Jul 2025
20 Jun 2025
18 Jul 2025
4 Jul 2025
20 Jun 2025 - 11 Jul 2025
Amount
Taking down chowkats with shutter (without taking shutter from the frame) not exc 1.5 sqm each complete all as specified and directed by Enginner-in-Charge.
S & F powder coated aluminium frame/track or shutters for windows, ventilators etc. with one or more rebates including joining cleat for fixing etc.fixed or sliding type/louvered window or ventilator without sash bar, aluminium including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and locking arrangement etc complete all as specified and directed by Enginner-in-Charge.
S&F 4 mm thick figured glass pin headed type and glazing with aluminium and neoprene beads in square not exc 0.5 sqm in each pane complete all as specified and directed by Enginner-in-Charge.
S&F 4mm thick plain sheet glass ordinary quality and glazing with aluminium and neoprene beads in square n. exc 0.5 sqm in each pane complete all as specified and directed by Enginner-in-Charge.
M&L aluminium anodised grill with suitable aluminium anodised frame section manufactured by M/S Deco grill pattern DG-102 (80 x 66 mm aparture ) complete all as specified and directed by Enginner-in-Charge.
S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, fixing in opening complete all as specified and directed by Engr-in-Charge.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 2omm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with sovent cement, suppling & fixing in the frame complete all as specified and directed by Engr-in-Charge.
S & F 75mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge
S&F 125 mm extruded aluminium handles, fabricated type anodised complete all as specified and directed by Engr-in-Charge.
Taking down shutters of any description exc 2 sqm each with all fittings
S&F 40 mm thick factory made Flush shutters , solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed
Taking down shutters of any description exc 1sqm but n exc 2sqm each complete all as specified and directed by Engr-in-Charge.
S & F factory made shutter 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauze etc edges of framing, plain chamfered or rounded fitted with cut and mitred beads fo securing gauge etc suzes of members of shutters as specified in SSR part I section 8 clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
S&F 35mm thick second class hard wood factory made plain framed panelled shutters (two or three panes) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board medium density with commercial veneering both face. The size of rail shall be as per IS 1003 (Part-I) kiln seasoned and chemically pressure treated all as specified and directed.
S & F 35 mm thick factory made flush shutters, solid core constrution with block board core and plywood face panels, commercial type on both side complete all as specified and directed by Engr-in-Charge.
S & F Aluminium wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm, cut to required size and fixed to doors,windows shutter (wooden/aluminium), with wooden beading (any size)or alu shutters aluminium wire staples and removing old beading, complete all as specified and directed by Engr-in-Charge.
S & F 100mm size stainless steel medium weight butt hinges complete all as specified and directed by Engr-in-Charge.
S&F 150 mm extruded aluminium handles, fabricated type anodised
S&F 150mm aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F 300 mm long aluminium alloy, anodised sliding door bolt with hasp and staple ( bolt type ) and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.
S&F 140 mm overall length floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor all complete as specified and as directed by Engr-in-Charge.
M&L for Preparation of new surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by EIC.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed by Enginner-in-Charge.
M&L non-skid coloured Ceramic tiles 300x300x6 to 7mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not excceding 0.16 sqm, in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match including 20 mm thick screed bed in CM 1:6 all as specified.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.16 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including bedding layer of mortar 20mm thick in CM 1:6 for laying floor finishes complete all as specified and directed by Enginner-in-Charge.
M & L Coloured glazed ceramic tiles 300 x 200 x 6 to 7mm on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment all as specified and as directed.
M & L Coloured glazed ceramic tiles 450 x300 x7 mm thick on vertical surfaces set & jointed in neat cement slurry and pointed in white cement mixed with pigment
M&L for rendering 10mm thick in cement mortar 1:4 on backing coat of wall tiles etc complete all as specified and directed.
Dismantling of stone slabs, bedded and pointed in any mortar of any description or thickness in floors, approns etc.
M&L 20mm thick Granite (of any type) over 12mm thick backing coat in CM 1:4 machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as directed by Engr-in-Charge.
Dismantling of MS grill of any description and position etc.
M&L for fabrication of framed work as MS grills. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters, walk ways, railings, framework of water tanks and similar work conform to Fe 290 Gde-E-165 & fixed in position as directed etc complete.
M&L for Preparation of new surfaces of steel or steel based materials of any description not other wise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of antirush paint/red oxide primer, complete all as specified and as directed by EIC.
RAMESH ENTERPRISES (BID ID -3355328)
Shivam Enterprises (BID ID -3355091)
SAHU AND SAHU CO. (BID ID -3355240)
ASHOKA TRADING CO. (BID ID -3355361)
Unity Enterprises (BID ID -3354877)
JANKI ENTERPRISES (BID ID -3363262)
I.J Enterprises (BID ID -3354847)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .