Renovation of Transit House-1 at NALCO Township, Damanjodi

1.1 Removing the excavated materials, debris of any description and any other waste materials, spoil heaps including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places etc. complete for the following leads. Removal upto 1km in Township/plant and mines area at low lying areas.

1.2 Removing the excavated materials, debris of any description and any other waste materials, spoil heaps including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places etc. complete for the following leads. Removal upto 2km in Township/ Plant/Mines area at low lying areas.

1.3 Removing the excavated materials, debris of any description and any other waste materials, spoil heaps including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places etc. complete for the following leads. Removal upto 3km in Township/ Plant/Mines area at lowlying areas.

2.1 Earthwork in Excavation over areas in all type of soil ( exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan),including disposal of excavated earth within a lead of 50 mtrs and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil

3.1 Earth work in Excavation in foundation Trenches or drains (not exceeding 1.5 mtr in width or 10 Sqm on plan) including dressing of sides and ramming of bottoms, lift up-to 1.5 mtr,including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtrs. All kinds of soil.

4.1.1 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc, not exceeding 80 mm dia.

4.1.2 Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50m. All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

5 Back filling with available excavated earth (excluding rocks) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 Mtr and lift up-to 1.5 Mtr.

6 Surface dressing micro levelling in all types of soil other than rock to a depth not exceeding 15 cm including cutting and filling, levelling, ramming to the desired formation level. The work includes excavation in over areas and filling in low lying areas within a lead of 50 mtrs. as per instruction of Engineer- in-charge.

7 Providing and Filling in plinth with sand under floors in trenches, sides of foundations etc. with approved quality sand and watering, ramming, consolidating and dressing etc. all complete as directed by Engineer-in-Charge.

8 Cleaning rank vegetation and grass including removal of the rubbish out side the boundary to the places as instructed by Engineer-in-Charge ,lead upto 50m. The rate shall including all types of bushes and jungle cutting and complete cleaning and raking out of grasses.

9 Desilting of drains (Open/Covered) at all lifts and disposal of the same with in 50 metres of lead and evenly spreading or stacking as directed for disposal as per site condition etc. all as per instruction of Engr-in charge including all labour, tools, tackles etc.all complete.

10 Making hole (up to 24 mm dia) for kitchen platform with necessary all tools and tackles complete.

11.1 Providing and laying plain cement concrete at all depths below and upto plinth level in foundations, footings, non-suspended floors including tamping, curing etc. but excluding the cost of centering and shuttering etc. as specified or directed in any shape, position, thickness and finishing the top surface rough or smooth etc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) P.C.C 1:2:4 (1 Cement: 2 Coarse sand: 4 Graded stone aggregates of 20mm nominal size)

11.2 Providing and laying plain cement concrete at all depths below and upto plinth level in foundations, footings, non-suspended floors including tamping, curing etc. but excluding the cost of centering and shuttering etc. as specified or directed in any shape, position, thickness and finishing the top surface rough or smooth etc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) P.C.C 1:3:6 (1 Cement: 3 Coarse Sand: 6 Graded stone aggregates of 20 mm nominal size)

12.1 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing : (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

14.1 Providing and laying Reinforced Cement Concrete works with graded stone aggregates of 20mm nominal size at slabs, roofs, stair cases, landing slabs, canopies, chajjas, bends, lintels, columns, walls, beams, lofts, projections, manhole covers, gully trap covers, valve chambers etc. as per drawing, specification and direction of the Engineer-in-charge at all heights and depths including vibration for consolidation, curing etc. complete excluding cost of centering and shuttering & steel reinforcement. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) Up to Plinth level with RCC grade 1:1 1/2:3 (1 Cement : 1 1/2 sand: 3 graded stone aggregates of 20mm nominal size)

14.2 Providing and laying Reinforced Cement Concrete works with graded stone aggregates of 20mm nominal size at slabs, roofs, stair cases, landing slabs, canopies, chajjas, bends, lintels, columns, walls, beams, lofts, projections, manhole covers, gully trap covers, valve chambers etc. as per drawing, specification and direction of the Engineer-in-charge at all heights and depths including vibration for consolidation, curing etc. complete excluding cost of centering and shuttering & steel reinforcement. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) Above Plinth level with RCC grade 1:1 1/2:3 (1 Cement : 1 1/2 sand: 3 graded stone aggregates of 20mm nominal size)

15.1 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Foundations, footings, bases of columns, etc. for mass concrete

15.2 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

15.3 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Suspended floors, roofs, landings, balconies and access platform

15.4 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Lintels, beams, plinth beams, girders, bressumers and cantilevers

15.5 Centering and shuttering including struting, propping etc. and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all heights and depth as directed by Engineer-in-charge. Columns, Pillars, Piers, Abutments, Posts and Struts

16 Providing, hoisting and fixing at any depth and height precast reinforced cement concrete work in lintels, string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, drain covers etc. including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

17 Bending / Binding and placing in position reinforcement for all type of RCC work at all height and depths, carting / transport them form store/issue points to site of work, straightening, bending, binding to required shape and size as per details, including supplying and binding with soft annealed binding wire and placing with proper cover blocks, supports, etc all complete. (REINFORCEMENT STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

18 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

19 Laying brick masonry with fly ash bricks at any shape including curing, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and Plinth. ( CEMENT AND FLY ASH BRICK SHALL BE ISSUED FREE OF COST AT NALCO'S STORE / ISSUE POINT)

20 Laying brick masonry with fly ash bricks at all heights in any shape including scaffolding, staging, curing, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand) in Superstructure.( CEMENT AND FLY ASH BRICK SHALL BE ISSUED FREE OF COST AT NALCO'S STORE / ISSUE POINT)

21 Laying half brick masonry with fly ash bricks at all heights in any shape including scaffolding, staging, curing, etc. complete in cement mortar 1:4 ( 1 cement : 4 coarse sand) in Superstructure. (CEMENT AND FLY ASH BRICK SHALL BE ISSUED FREE OF COST AT NALCO'S STORE / ISSUE POINT)

22.1 Brick work with fly ash bricks at any shape including curing, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and Plinth. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE / ISSUE POINT) Cement mortar 1:6 (1 cement : 6 coarse sand).

23 Providing and laying Random Rubble Masonry with approved hard stone in foundation & plinth, walls, culverts, retaining walls with cement motar 1:6 ( 1 cement : 6 coarse sand) including curing etc. all complete as per the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

24.1 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) Cement mortar 1:6 (1 cement : 6 coarse sand)

25 Laying Random Rubble Masonry with available boulders inside township in foundation & plinth, walls, culverts, retaining walls at all height & depth with cement motar 1:6 ( 1 cement : 6 coarse sand) including curing etc. all complete as per the direction of Engineer-in-charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

26 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 15 to 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing and all colour etc. all complete as specified and as directed by the Engineer-in-Charge. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

27.1.1 Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including making hole at kitchen Platforms for Gas pipe. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) Granite of any colour and shade Area of slab upto 0.50 sqm

27.1.2 Providing and fixing 15 to 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels including making hole at kitchen Platforms for Gas pipe. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) Granite of any colour and shade Area of slab over 0.50 sqm

28.1 Providing edge moulding to 15 to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

29.1.1 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) 8mm thick Granite of any colour and shade

30 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading.

31 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

32.1 Providing and fixing M.S.Grills of required pattern in frames of windows etc with M.S.Flat,square bar or round bar etc all complete. (All materials shall be in contractor's scope) Fixed to openings/wooden frames with rawl plugs screws / grouting in the wall with cement concrete 1:3:6 mix etc.

33 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

34.1 Providing 1 mm thick 35 mm wide bright finished stainless steel piano hinges and fixing with necessary screws etc., complete. Overall width 35 mm

35.1 Providing and fixing Stainless Steel sliding door bolts with nuts and screws etc. complete : 300x16mm

35.2 Providing and fixing Stainless Steel sliding door bolts with nuts and screws etc. complete : 250x16 mm

36.1 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 250x10 mm

36.2 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm

36.3 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 150x10 mm

37.1 Providing and fixing ISI marked stainless steel butt hinges with stainless steel screws etc. complete : 125x64x1.90 mm

37.2 Providing and fixing ISI marked stainless steel butt hinges with stainless steel screws etc. complete : 100X58X1.90 mm

38 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

39 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

40 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

41 Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

42.1 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 50 mm

42.2 Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. Size 65 mm

43 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete.

44 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete.

45.1 Providing and fixing chromium plated brass handles with necessary stainless steel screws etc. complete: 125 mm

45.2 Providing and fixing chromium plated brass handles with necessary stainless steel screws etc. complete: 100 mm

45.3 Providing and fixing chromium plated brass handles with necessary stainless steel screws etc. complete: 75 mm

46.1 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type

46.2 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type)

47.1 Providing and fixing 12 mm / 18 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors (Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick), windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured) and other similar & decorative / ornamental nature of works / Cup-board or Wardrobe partitions and shelves etc. as per the direction of the Engineer-in-Charge. 12 mm thick Marine plywood conforming to IS: 710

47.2 Providing and fixing 12 mm / 18 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors (Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick), windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured) and other similar & decorative / ornamental nature of works / Cup-board or Wardrobe partitions and shelves etc. as per the direction of the Engineer-in-Charge. 18 mm thick Marine plywood conforming to IS: 710

48.1 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick

48.2 Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick

49.1 Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm

49.2 Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 100 mm

49.3 Providing and fixing bright / matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 75 mm

50.1 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm

51 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full hreaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.

52 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge.

53 Providing & fixing eye piece ordinary two lence non-adjustable including all labour, tools & tackles all complete as per the direction of Engr-in-Charge.

54 Fabrication/ modification etc. including erection of Structural Steel work true to level and alignment as per instruction of Engineer-in-Charge, including all materials, transporting to workshop, transporting to site, as per requirement for all types of structural steel/all types of doors/shuttrs/all types of windows/all types of ventilators, work including red oxide primer and all tools, tackles, consumables, supervision etc. at all height and locations etc. all complete as per direction of Engineer-in-Charge. (All the materials are in the scope of contractor)

55.1 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. (All materials shall be in the scope of the contractor) Hot finished welded type tubes

56 Providing and fixing stainless steel ( Grade 304) railing, grill etc. and the like made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

57.1 Brick on edge flooring with fly ash bricks on a bed of 12 mm cement mortar, including filling the joints with same mortar, with non modular bricks: (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE) 1:6 (1cement : 6 coarse sand)

58.1 Brick on edge flooring with fly ash bricks on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: (CEMENT AND FLY ASH BRICKS SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE) 1:6 (1cement : 6 coarse sand)

59.1 Providing and laying Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) including hacking wherever required all complete as per instruction of E.I.C: (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE) 20 to 25mm Kota stone slab

60 Providing and laying Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including hacking wherever required all complete as per instruction of E.I.C. (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE)

61.1.1 Providing and laying vitrified floor tiles of approved make (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with epoxy sealent / white cement with matching pigment where required all complete as per instruction of EIC. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). Glazed vitrified floor tiles polished finish of Size of Tile 600x600 mm

62 Deduct for not using 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) bedding in laying of floor tiles.

63 Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness.

64.1.1 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent), in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with epoxy sealent / white cement with matching pigment required for tile joints work shall be in the contractor's scope & matching pigments etc. complete. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). (Epoxy sealent required for grouting of the tile joints for toilets, bathroom and white cement with matching pigment in the locations except toilets and bathrooms shall be in the contractor's scope.) Glazed vitrified floor tiles polished finish of Size of Tile 600x600 mm

65.1.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). White cement required for the work shall be in the contractor's scope. Glazed vitrified floor tiles polished finish of Size of Tile 600 x 1200 mm

65.1.2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). White cement required for the work shall be in the contractor's scope. Glazed vitrified floor tiles polished finish of Size of Tile 1200 x 1200 mm

66.1.1 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). White cement required for the work shall be in the contractor's scope. Glazed Vitrified tiles (Matt/Antiskid) finish of size Size of Tile 600 x 600 mm

66.1.2 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer (Nitco / orient / somany / Kajaria / H & R Johnson or equivalent) , in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). White cement required for the work shall be in the contractor's scope. Glazed Vitrified tiles (Matt/Antiskid) finish of size Size of Tile 600 x 1200 mm

67.1 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm

67.2 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x1200 mm

68 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles.

69 Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge:

70.1 Painting top of roofs with bitumen of approved quality @ 17kg per 10 sqm impregnated with a coat of coarse sand at 60 cudm per 10 sqm, including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : With residual type petroleum bitumen of grade 85/25 or 90/15

71.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter

71.2 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter

72.1.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 75 mm

72.1.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler 110 mm

72.2.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 75 mm bend

72.2.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° 110 mm bend

72.3.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 75 mm Shoe

72.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Shoe (Plain) 110 mm Shoe

73.1 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 75 mm

73.2 Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm

74 Providing and laying 12mm thick cement plaster in cement mortar (1 cemnt : 6 fine sand) using approved sand including curing etc. all complete for all height. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

75 Providing and laying 15mm thick cement plaster in cement mortar 1:6 ( 1 cement : 6 fine sand ) on the rough sides of single or half brick wall or masonary work using approved type of sand including curing etc all complete for all height. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

76 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand)

77 Providing 6mm thick cement plaster on ceiling / concrete surface in cement mortar 1:3 (1 cement: 3 fine sand) including cleaning, preparation of surfaces, hacking of concrete faces, scaffolding if necessary, curing etc. complete for all heights. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

78 Neat cement punning. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

79.1 Pointing with cement mortar 1:3 over stone masonry/pitching work etc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) Flush/ Ruled pointing

79.2 Pointing with cement mortar 1:3 over stone masonry/pitching work etc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) Raised and cut pointing

80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

81.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer

82.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New / old work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

83.1 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (one or more coats applied @ 0.83 ltr/10 sqm).

84.1 Applying priming coat : With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

84.2 Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works

85.1 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

85.2 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On concrete work

86.1 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 100 mm diameter pipes

86.2 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work. 150 mm diameter pipes

87.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

88.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

89.1 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new / old work

90.1 French spirit polishing : Two or more coats on new works including a coat of wood filler

91.1 Polishing on wood work with ready mixed wax polish of approved brand and manufacture : New work

92 Lettering with Synthetic enamel paint of approved brand and manufacture. (Base painting shall be paid separately)

93 6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.

94.1 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : (CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO STORE) With cement mortar 1:4 (1 cement : 4 fine sand)

95.1 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground. For door/ window/ clerestory window

96 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

97 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

98.1 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 75 mm diameter pipes

98.2 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 100 mm diameter pipes

98.3 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 150 mm diameter pipes

99.1 Polishing on wood work with ready made wax polish of approved brand and manufacture : Old work

100 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance works on superstructure above 3.50 metre height such as repair of chajja / fins / cornice / dripcourse / external wall plaster upto 10.00 Sqm. as per the direction of Engineer-in-Charge .

101 Providing and applying crack filler to the wall cracks (not less than 3mm width) of approved brand & manufacture like "crackseal by chemical adhesive (P) Ltd. after through cleaning of cracks free from loose particles, applying the crackfiller along the cracks, wiping excess materials off with damp spouse before drying, smoothing out the joints etc., all complete with labour and materials as per the direction of Engineer-in- Charge.

102 Corrosion protection of exposed reinforcement: Providing and applying Concrete penetrating corrosion Inhibitor (CPCI) over the entire surface in 2 coats typically @ of 4 m2/ltr/coat and Providing and applying two coats of Alkaline rust converter over the exposed reinforcement as per manufacturers specification and Providing and applying 2 coats of anticorrosive epoxy phenolic rebar protection system on the exposed reinforcement applying manually using brush as per manufactures specification. etc. complete as directed by Engineer-in-charge. (1) Concrete penetrating corrosion Inhibitor:EPCO KP-100(Krishna Conchem)/Sika Rustop(Sika)/PROTECTOSIL-CIT(BASF) or equivalent, (2) Alkaline rust converter: Feo Vert(Krishna Conchem)/Rust clear (ROFFE)/mbt rustkleen(BASF) or equivalent MasterEmaco p130(BASF)/ IPNET-RB(Krishna Conchem)/ or equivalent, (3) Anticorrosive epoxy phenolic rebar protection: MasterEmaco p130(BASF)/ IPNET-RB(Krishna Conchem)/ or equivalent

103 Epoxy Repair Mortar Sealing of cracks & honey combed patches: Providing & applying epoxy patching compound of approved brand as per manufacturers specification for sealing of cracks & honey combed patches including applying bond coat and finishing the surface etc. complete as per direction of Engineer In charge . Epoxy Mortar : Nitobond VF.(Fosroc)/ Sika Top77 (Sika)or Equivalent. Epoxy Bond coat & finish coat: NotobondEP (Fosroc) /Sika Hibond (Sika) or Equivalent

104 Crack Bridging waterproof Coating: Providing and applying Crack bridging water proof flexible coating as per manufacturer’s specification of approved brand, manually using brushes on the wet hardened concrete surfaces after cleaning the surface and removing all loose particles/deposits etc. complete as directed by the Engineer-in-charge. Crack bridging Water proof coating: Nitocote CM 210 (fosroc)/Sikagard XT White Base(Sika)/Master seal 180(BASF)/MKY Acquafin 2C(MYK SCHOMBURG) or equivalent.

105 Injection under water setting Epoxy grout: For Strengthening of RCC structure in water: Providing and injecting under water setting low viscosity epoxy grout as per manufacturer’s specification till the nipples refuses to take further grout etc. complete as directed by Engineer-In-charge. Epoxy grout (Underwater) : MASTERFLEX 801(BASF)/Cebex 250(Fosroc) or equivalent

106.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

107 Demolishing R.C.C. work manually/ by mechanical means (breaker / cutter) as suit at site including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

108 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

109.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

110.1 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar

111.1 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking complete and return to Departmental store: Of area 3 sq. metres and below

111.2 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking complete and return to Departmental store: Of area beyond 3 sq. metres

112.1 Taking out doors, windows and clerestory window shutters (steel or wood) from the chowkhats. Of area 3 sq. metres and below

112.2 Taking out doors, windows and clerestory window shutters (steel or wood) from the chowkhats. Of area beyond 3 sq. metres

113.1 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: R.S. Joists

113.2 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in: Channels, angles, tees and flats

114.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm

114.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm

115.1 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 75 to 80 mm dia pipe

115.2 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 100 mm dia pipe

115.3 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : 150 mm dia pipe

116.1 Dismantling G.I. pipes manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge. 15 mm to 40 mm nominal bore excluding excavation and refilling trenches.

116.2 Dismantling G.I. pipes manually / by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge. 15 mm to 40 mm nominal bore including excavation and refilling trenches after taking out the pipes.

117.1 Dismantling of flushing cistern of following types including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. C.I.

117.2 Dismantling of flushing cistern of following types including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. PVC/Vitrious China

118 Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directedby Engineer-in-charge.

119 Dismantling of old four course tarfelting from roof at all height & parapet wall and stacking dismantled tarfelts with in a lead of 100M including all labour tools &tackles etc.all complite as per direction of engineer-in-charge.

120 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

121 Providing and laying gripped / matt finished vitrified tile of approved make (ENDURA of H & R Johnson or equivalent make) of size 300x300x9.8mm, in all colours and shades in for outdoor floors such as Parking area, footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc.complete as per direction of Engineer-in-Charge. (GREY CEMENT SHALL BE ISSUED FREE OF COST FROM NALCO'S STORE). White cement required for the work shall be in the contractor's scope.

122.1 Providing and fixing white vitreous china water closet squatting pan (Indian type) of approved make (Hindware / Parryware / Cera or equivalent) Orissa pattern W.C. pan of size 580x440 mm

123 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan of approved make (Hindware / Parryware / Cera or equivalent)

124 Providing and fixing white vitreous china pedestal of approved make (Hindware / Parryware / Cera or equivalent) for wash basin completely recessed at the back for the reception of pipes and fittings.

125.1 Providing and fixing P.V.C. low level flushing cistern of approved make (Hindware / Parryware / Cera or equivalent) with manually controlled device (handle lever) conforming to IS : 7231, with fittings, accessories and necessary flush pipe complete. 10 litre capacity - White

126.1 Providing and fixing solid plastic seat of approved make (Hindware / Parryware / Cera or equivalent) with lid for pedestal type W.C. pan complete : Black/White solid plastic seat with lid

127 Providing and fixing white vitreous china flat back type lipped front urinal basin of 420x395x635 mm sizes of approved make (Hindware / Parryware / Cera or equivalent).

128.1 Providing and fixing white vitreous china wall mounted wash basin of approved make (Hindware / Parryware / Cera or equivalent) including making all connections but excluding the cost of fittings: Flat back wash basin of size 450x300 mm

129.1 Providing and fixing white vitreous china table top wash basin of Jaguar make including making all connections but excluding the cost of fittings: Table Top Basin 530x420x140, Model / Code No. JDS-WHT-25907N of Jaguar Make

130.1 Providing and fixing Single Lever Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, connecting Legs & Wall Flange (without Hand & Overhead Shower) of Jaguar make, Model / Code No. KUP-35125PM all complete. 15 mm nominal dia.

131.1.1 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia

131.1.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 to 50 mm dia

132 Providing and fixing swivel Mirror 630 X 445mm Model / Code No. AKP-35795 of Jaguar make inculding all fittings and fixing complete.

133.1 Providing and fixing glass shelf with guard rail of approved pattern of Jaguar make, Model / Code No.AKP-35771P all complete fixed with 40 mm long screws, rawl plugs etc. 600 mm long

134 Providing and fixing Toilet Roll Holder with Stainless Steel Flap of Jaguar make, Model /Code No. AKP-35753PS.

135 Providing and fixing Click Clack Waste 32mm Size Full Thread with 130mm Height for wash basin of Jaguar make. Model /Code No. ALD-727L130.

136.1 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms

136.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms

138.1 Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms.

139 Providing and fixing liquid soap dispenser of Jaguar Make, Model / Code No. SDR-WHT-DJ0010FN with all necessary fittings complete.

140 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

141 Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

142 Providing and fixing Towel rack 600mm long with lower hangers of Jaguar Make, Model /Code No. ACN-1181S including necessary fittings all complete.

143.1 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms

144 Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2" BSP thread and shapes, weighing not less than 60 gms.

145.1 Providing and fixing PTMT urinal cock of approved quality and colour. 15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms.

146 Providing and fixing white vitreous china Rimless Back To Wall WC (European type W.C. pan) of Jaguar Make. Model No - OPS-WHT-15955P180UFSM with concealed flush valve of Jaguar Make of Model / Code No. FLV-1095NG with all the necessary fittings complete.

147 Repairing of leaky 'S'trap of WC pan including necessary cutting and making good the walls etc. complete in all respect. (brick work and filling the base concrete to be paid separately).

148.1.1 Providing and fixing soil, waste and vent pipes : SWR Pipes single socket (Type-B) - Solfit pasting / Solvent type as per IS:13592 110 mm dia

148.1.2 Providing and fixing soil, waste and vent pipes : SWR Pipes single socket (Type-B) - Solfit pasting / Solvent type as per IS:13592 75 mm dia

149.1.1 Providing and fixing SWR fittings as per IS:14735 Plain bend of required degree 110 mm dia

149.1.2 Providing and fixing SWR fittings as per IS:14735 Plain bend of required degree 75 mm dia

149.2.1 Providing and fixing SWR fittings as per IS:14735 bend of required degree with access door 110 mm dia

149.2.2 Providing and fixing SWR fittings as per IS:14735 bend of required degree with access door 75 mm dia

149.3.1 Providing and fixing SWR fittings as per IS:14735 Door Tee 110 mm dia

149.3.2 Providing and fixing SWR fittings as per IS:14735 Door Tee 75 mm dia

149.4.1 Providing and fixing SWR fittings as per IS:14735 coupler 110 mm dia

149.4.2 Providing and fixing SWR fittings as per IS:14735 coupler 75 mm dia

149.5.1 Providing and fixing SWR fittings as per IS:14735 P-Trap with Leg 110 mm dia

149.5.2 Providing and fixing SWR fittings as per IS:14735 P-Trap with Leg 75 mm dia

149.6.1 Providing and fixing SWR fittings as per IS:14735 Nahani Trap 110 mm x 75 mm dia

149.6.2 Providing and fixing SWR fittings as per IS:14735 Nahani Trap 110 mm x 110 mm dia

149.7.1 Providing and fixing SWR fittings as per IS:14735 Gully trap with jalli 110 mm

149.8.1 Providing and fixing SWR fittings as per IS:14735 Providing and fixing terminal guard / cowl 110 mm dia

149.8.2 Providing and fixing SWR fittings as per IS:14735 Providing and fixing terminal guard / cowl 75 mm dia

149.9.1 Providing and fixing SWR fittings as per IS:14735 Door cap 110 mm dia

149.9.2 Providing and fixing SWR fittings as per IS:14735 Door cap 75 mm dia

150 Providing & fixing C.I.brackets of approved make for wash basin / sink including cutting & making good the walls, taking out the broken brackets etc. complete with labour & materials suitable for all size of sink or wash basin.

151.1.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes

151.1.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal outer dia Pipes

151.1.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal outer dia Pipes

152.1.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia Pipes

152.1.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal outer dia Pipes

152.1.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 40 mm nominal outer dia Pipes

152.1.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 50 mm nominal outer dia Pipes

152.1.6 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 75 mm nominal outer dia Pipes

153.1.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes

153.1.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal outer dia Pipes

153.1.3 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal outer dia Pipes

154.1 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore

155.1 Providing & fixing gun metal valve of approved make with CI wheel of approved make (screwed end) . 25mm dia nominal bore .

155.2 Providing & fixing gun metal valve of approved make with CI wheel of approved make (screwed end) . 32mm dia nominal bore

155.3 Providing & fixing gun metal valve of approved make with CI wheel of approved make (screwed end) . 40mm dia nominal bore

156.1 Providing & fixing high or low pressure ball valve/ball cock (brass) with plastic floats of approved quality complete. 20mm nominal bore

156.2 Providing & fixing high or low pressure ball valve/ball cock (brass) with plastic floats of approved quality complete. 25mm nominal bore

157.1 Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 25 mm nominal bore

158 Providing & Fixing 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring & Rubber Washer (Suitable for Basin Mixers) of Jaguar make, Model / Code No. ALD-803AB

159 Providing & Fixing 450mm Long Braided Hose with Two 15mm Nuts & Rubber Washers Without Nipple (Suitable for Geysers) of Jaguar make, Model / Code No. ALD-805B

160.1 Providing & Fixing un-plasticised PVC connection pipe with brass unions: 15 mm nominal bore 45 cm length

161 Providing & fixing Shower head with shower arm inculding all fittings of Jaguar make [Shower Arm Straight 20mm dia. & 450mm Long Round Shape without Bend for Wall Mounted Showers with Flange of Jaguar make Shower head, Model / Code No. OHS-35495 & Overhead Shower 150X150mm Squarel Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System of Jaguar make Shower arm, Model / Code No. SHA-49483] complete with 15mm or 20 mm inlet.

162 Fixing on position / terrace (at all floor levels) polyethylene water storage tank with cover and suitable locking arrangement including transporting the same from NALCO's store / issue point and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (polyethylene water storage tank with cover and suitable locking arrangement will be supplied free of cost by NALCO).

163 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

164.1 Providing and fixing Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook with N.R.V (Back Flow Preventer) of Jaguar make, Model / Code No. ALD-577 all complete: 15 mm nominal bore

165.1 Providing and fixing Two Way Bib Cock with Wall Flange of Jaguar make, Model / Code No. ARI-39041. 15 mm nominal bore

166.1 Providing and fixing Jaguar make Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with Model / Code No. ALD-083, ALD-089 or ALD-081), Model / Code No. KUP-35083KPM and Regular Body of Concealed Stop Cock Suitable For 20 mm Pipe Line with Protection Cap (without Exposed Parts) of Jaguar make, Model / Code No. ALD-083 as per the direction of Engineer-in-Charge: 15mm nominal bore

167.1 Providing and fixing Exposed Part Kit of Single Lever Basin Mixer Wall Mounted Consisting of Operating Lever, Cartridge Sleeve, Wall Flange, Nipple & Spout (Compatible with Model / Code No. ALD-233N or ALD-235N) of Jaguar make, Model / Code No. LYR-38233NK & Left or Right Hand Side Operated Concealed Body for Single Lever Basin Mixer Wall Mounted, but without Exposed Parts of Jaguar make, Model / Code No. ALD-235N all complete. 15 mm nominal bore

168 Providing and fixing Telephonic Bath Hand Shower 95mm Round Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System of Jaguar Make , Model / Code No. HSH-1737 with Jaguar make Flexible Tube 8mm dia. & 1.5M Long with Nuts, Model No. SHA-549D8 & Jaguar make Wall Outlet with Shower Hook in Round Shape Model / Code No. SHA-566R all complete. (15 mm nominal bore)

169.1 Providing and fixing Angular Stop Cock with Wall Flange of Jaguar make, Model / Code No. KUP-35053PM all complete: 15 mm nominal bore

170 Providing and fixing Pillar Cock with 140mm Extension Body of Jaguar make, Model No. ARI-39021 all complete. (15 mm nominal bore)

171 Providing and fixing 15mm nominal bore Pillar cock of approved make (Jaquar make, Model / Code No. OPP-15001PM) including removing the damaged one wherever required for new / old work:

172.1 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 86 mm long.

172.2 Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 122mm long.

173.1 Providing and fixing PTMT stop cock of approved quality and colour. 15 mm nominal bore, 86 mm long.

173.2 Providing and fixing PTMT stop cock of approved quality and colour. 20 mm nominal bore, 89 mm long.

173.3 Providing and fixing PTMT stop cock of approved quality and colour. Concealed stop cock, 15 mm nominal bore, 108 mm long

174.1 Providing and fixing PTMT Push cock of approved quality and colour. PTMT Push cock 15 mm nominal bore, 80 mm long.

175.1 Providing and fixing PTMT grating of approved quality and colour (Circular type). Ashirwadd 125 mm nominal dia with 25 mm waste hole

176.1 Providing and fixing PTMT Ball cock of approved qualitity colour and make complete with epoxy coated aluminum rod with L.P. / H.P.H.D plastic ball. 15 mm nominal bore, 105 mm long.

176.2 Providing and fixing PTMT Ball cock of approved qualitity colour and make complete with epoxy coated aluminum rod with L.P. / H.P.H.D plastic ball. 20 mm nominal bore, 120 mm long.

176.3 Providing and fixing PTMT Ball cock of approved qualitity colour and make complete with epoxy coated aluminum rod with L.P. / H.P.H.D plastic ball. 25 mm nominal bore, 152 mm long.

177.1 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. Jaguar 15 mm nominal bore with 45 cm length

178 Fixing of Geysers on walls by cutting 4 nos of hole, grouting the same by putting 4 nos of GI bolts with nuts of 100mm long and 12mm dia with cement concrete 1:2:4 (1 cement: 2 course sand: 4 graded stone aggregate of 12.5 mm & down size ) making good the surface by plaster finish, painting touch up etc. including making arrangement for water connection for which material shall be paid separately. (Geysers will be supplied free of cost by the Owner at Owner's issue point). (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

179 Providing & fixing of GI / polythene covers of storage tanks with locking arrangements etc. all complete as per requirement .

180.1.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN ELBOW 90 DEGREE 15mm

180.1.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN ELBOW 90 DEGREE 20mm

180.1.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN ELBOW 90 DEGREE 25mm

180.1.4 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN ELBOW 90 DEGREE CPVC reducing elbow 20x15mm size

180.1.5 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN ELBOW 90 DEGREE CPVC reducing elbow 25x15mm size

180.1.6 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN ELBOW 90 DEGREE CPVC reducing elbow 25x20mm size

180.2.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC ELBOW (BRASS) 90 DEGREE 20X15mm

180.2.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC ELBOW (BRASS) 90 DEGREE 25X15mm

180.2.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC ELBOW (BRASS) 90 DEGREE 25X20mm

180.3.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN TEE 15mm

180.3.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN TEE 20mm

180.3.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN TEE 25 mm

180.4.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TEE (BRASS) 20X20X15mm

180.4.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TEE (BRASS) 25X25X15mm

180.4.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TEE (BRASS) 25X25X20mm

180.5.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC REDUCING COUPLER 20X15mm

180.5.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC REDUCING COUPLER 25X15mm

180.5.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC REDUCING COUPLER 25X20mm

180.6.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN REDUCE TEE 20X20X15mm

180.6.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN REDUCE TEE 25X25X20mm

180.6.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC PLAIN REDUCE TEE 25X25X15mm

180.7.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC COUPLER / SOCKET 15mm

180.7.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC COUPLER / SOCKET 20mm

180.7.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC COUPLER / SOCKET 25 mm

180.8.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC UNION 15mm

180.8.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC UNION 20mm

180.8.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC UNION 25 mm

180.9.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BALL VALVE 15mm

180.9.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BALL VALVE 20mm

180.9.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BALL VALVE 25 mm

180.10.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BUSHING 20X15mm

180.10.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BUSHING 25X20mm

180.10.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC BUSHING 25X15mm

180.11.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC FAPT 15mm

180.11.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC FAPT 20mm

180.11.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC FAPT 25 mm

180.12.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC MAPT 15mm

180.12.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC MAPT 20mm

180.12.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC MAPT 25 mm

180.13.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TANK NIPPLE 20mm

180.13.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TANK NIPPLE 25 mm

180.13.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. CPVC TANK NIPPLE 32 mm

180.14.1 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. POWDER COATED METAL CLAMP 15mm

180.14.2 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. POWDER COATED METAL CLAMP 20mm

180.14.3 Providing and fixing following CPVC fittings including dismantling the old one from the existing pipe line for old work. POWDER COATED METAL CLAMP 25 mm

181.1.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make (i.e. JINDAL / HINDALCO or equivalent make), fixing with dash fastners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, and joined mechanically wherever required including cleat angle, locking cleat for locking arrangement, Aluminium snap beading for glazing / paneling, screws, all complete as per drawings and direction of Engineer-in-Charge. (No wastage will be paid). (Glazing, paneling to be paid for separately). For fixed portions: Power coated aluminium (minium thickness of powder coating 50 micron)

181.2.1 For shutters of doors, windows (Sliding or Casement) & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required including the cost of rubber / neoprene gasket required. (fittings shall be paid separately). (No wastage will be paid). Powder coated aluminium (minimum thickness of powder coating 50 micron)

182.1 Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with necessary screws etc. complete as per drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides.

183.1 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with rubber / neoprene gasket wherever / if required for old / new work etc. complete as per the drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes / one way mirror glass panes of 5.5 mm thickness

184.1 Providing and fixing double action hydraulic floor spring with cover plate of approved brand and manufacture conforming to IS : 6315 with double spring mechanism for aluminium doors, including cost of cutting floors including removing the damaged one wherever / if required, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness

185.1 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of engineerin-charge Powder coated minimum thickness 50 micron aluminium

186 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

187.1 Grading roof for water proofing treatment including hacking with Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

187.2 Grading roof for water proofing treatment including hacking with Cement mortar 1:4 (1cement : 4 coarse sand) (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE)

188.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane: 3 mm thick

189 Providing and applying waterproofing coating with waterproofing material [i.e. one coat of Dr. Fixit Raincoat Classic over a coat of Dr. Fixit Raincoat Universal Base Coat (Dr. Fixit Raincoat WPC) of Pidilite Industries Ltd. or two coats of Wall Shield 2K of Berger Paints India Ltd. or equivalent approved make as per the manufacturer's specification] including applying a coat of primer with Dr. Fixit Primeseal of Pidilite Industries Ltd. or Wall Shield 2K of Berger Paints India Ltd. or equivalent approved make on exterior wall surface of the building as per the manufacturer's specifications alongwith the surface preparation, sealing the cracks if any with Dr. Fixit Crack-X paste / Dr. Fixit Crack-X Shrinkfree of Pidilite Industries Ltd. or Advanced Latex Plus of Berger Paints India Ltd. or equivalent approved make, cost of all materials, labour, tools and tackles etc. complete as per the direction of Engineer-in-Charge.

190 Supply and fixing of sticker

191.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 45 x 70 mm

191.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 45 x 85 mm

191.3 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 50 x 100 mm

191.4 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 50 x 125 mm

191.5 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 65 x 100 mm

191.6 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 65 x 125 mm

191.7 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Frame size 65 x 150 mm

192.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 30 mm thick

192.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick

193.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 18 mm thick

193.2 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/ mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) 25 mm thick

194.1 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum ensity of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) 6 mm thick

195 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Please Enable Macros to View BoQ information