REPAIR TO SIGN BOARDS, ROAD MARKING, DEALINEATORS, ROAD STUDS, CAT EYES AND OTHER MISCELLANEOUS ITEMS AT SUNJUWAN AND DAMANA UNDER GE JAMMU

Amount

Taking down old unserviceable sign board of any description including frame work from ground surface complete all as specified and directed.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Material and labour for cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

Supply and fixing 50mm dia stainless steel pipe made out of 1.80mm thick superior quality steel sheet, as in frame structure of sign board including cutting, seamless welding and framing complete all as specified and directed.

Supply and fixing retro reflective, double sided road sign boards comprising of 4mm thick aluminum composite panel (ACP) sandwiched with 0.5mm thick aluminium sheet on both side, factory finished or PDVF coated as base board, micro prismatic retro reflective sheet and electro cut coloured overlay film, ACP sheet shall be routed, folded and fixed to frame with 24mm wide and 2.3mm thick VHB tape provided all around the frame including riveting at right angle face of the frame with POP riveting or with self taping stainless steel screws 5mm dia, spaced not more than 300mm center to center ensuring that no riveting is seen on either face of the frame, micro prismatic retro reflective sheet conforming to Type-XI of IRC:67:2012 shall be pressure fixed as background sheet on both side of ACP which will be over laid with electro cut transparent film of approved make and colour to create a desired name information message including all materials required for fabrication, erection and installations and fixed to steel frame complete all as specified and directed. Note: - Stainless steel frame shall be measured and paid separately under respective item.

Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exceeding 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturer's instructions complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No. DA 972.0 Dark Eye or equivalent in Greenlie / Oscar / Siner infrastructure / 3 M fixed with and including mild steel stud of suitable size as per manufacturer's instructions complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4V / 0.3 watt one NI-ed rechargeable battery (1.2 V / 1600 MA) consisting of super bright LED with 10,000 to 18,000 MCD complete as per manufacturer's instructions etc. all as specified and directed.

Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 numbers 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45 / 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC (1:2:4) (150 x 150 x 300mm) type B-1 complete all as specified and directed.

Supply and fixing in repair speed bumps made out of heavy duty tough rubber of size 350 x 250 x 53mm, weight 1.20 Kg approximate, colour black and yellow and fixed to road surface with bituminous adhesive and as per manufacturer instructions complete all as specified and directed. Make: - Dark Eye Model No. 1006 / 3M / Avery Dennison.

Supply and fixing road safety 800mm dia convex polycarbonate acrylic unbreakable mirror fixed over and including 2100mm height above ground level of 75mm dia stainless steel pipe above road surface fixed in ground with PCC (1:2:4) minimum 450mm deep in ground complete all as specified and as directed. Make: - Shurksha or equivalent.

Dismantling stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Material and labour for 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) in floor as sub base complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, M-35 grade complete all as specified and directed.

Material and labour for precast factory made cement concrete block size (kerb stone) (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) fixed dry mortar complete all as specified and as directed.

Material and labour for preparation of new surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

Supply and fixing rubberised road speed bumps / breaker of size 230 X 140 X 40 mm yellow and black speed bump made of PBS rubberised material including fixing with nails / screws / sticking material etc all as per manufacturer's instructions complete all as specified and as directed at site.

Supply and fixing rubberised road speed bumps / breaker of size 350 X 250 X 50 mm yellow and black speed bump made of PBS rubberised material including fixing with nails / screws / sticking material etc all as per manufacturer's instructions complete all as specified and as directed at site.

Supply and fixing neon road side sign board erected at the side of roads and above roads to give instructions or provide information to road users, made of 40mm dia tubular mild steel pipe, including writing in instructions / information with retro reflective tape as directed. (Size of board 0.9 X 0.6 metre height 1.8 metre) and embedded in PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) of size 45 X 45 X 60 cm complete all as per manufacturer's instructions and as directed by Engineer-in-Charge.

Supply and fixing patchmate readymade premix road patching material for filling potholes of 25 Kg per Bag including filling in potholes, ramming and levelling to match with existing road surfaces complete all as per manufacturer's instructions and all as directed at site.

Material and labour for 60mm thick machine pressed precast concrete interlocking paver block in glossy finish with grey cement and no pigment, any shape and size except tiles confirming to IS : 15658-2006, M-35 grade complete all as specified and as directed.

Material and labour for cement concrete (1:5:10) type E-2 (using 40 mm graded crushed stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and labour for plain cement concrete (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in copings, bed block etc and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and as directed.

ss enterprises

vishesh engineers

M/S MOHAN LAL GUPTA

M/s Koul & Sons

M/S RAVINDER SINGH

M/S TRIKUTA BUILDERS

Bidder Name

M/S TRIKUTA BUILDERS

M/S RAVINDER SINGH

PARAS RAM ASGOTRA AND SONS

M/S MOHAN LAL GUPTA

ss enterprises

M/s Koul & Sons

vishesh engineers