Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹16.2 LAccepted-AOC | 1 | Accepted-AOC L-1 | |
| 2 | 2₹16.6 L+₹14,167 (0.86%)Rejected-Finance GALI NO 5 6 H NO 6 275 JHARODA MAARA EXTN PART III BURARI NEW DELHI 110084 | NEW DELHI | CENTRAL DELHI | DELHI | 110084 | 2 | Rejected-Finance Being other than L-1 | |
| 3 | 3₹16.7 L+₹22,304 (1.35%)Rejected-Finance | 3 | Rejected-Finance Being other than L-1 | |
| 4 | 4₹17.9 L+₹1.5 L (8.88%)Rejected-Finance 58 SHAHEED NAGAR OPP BHIMRAO AMBEDEKAR UNIVERSITY RBL ROAD LUCKNOW 226025 UP | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226025 | 4 | Rejected-Finance Being other than L-1 |
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
9 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE EAST LUCKNOW
GE EAST LUCKNOW
SPL REPAIR TO BLDG. NO 13, HM MARG AND OTHER SANCTION WORKS UNDER GE (EAST) LUCKNOW
2022_MES_522632_1
GE/E/LKO/T-06 of 2022-23
Open Tender
Civil Works
Item Rate
90 days
GE EAST LUCKNOW
Please refer Tender documents.
4 documents required · 4 mandatory
₹500
Yes
GE EAST LUCKNOW
₹34,000
Yes
24 Jun 2022
7 May 2022
11 Jun 2022
7 May 2022
9 Jun 2022
28 May 2022
60 days
Amount
Dismantling floor, hearth or wall tiling including CM bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for vetrified ceramic tiles double charge/dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.42 Sqm but not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and directed.
All as per above item No. 2 but on vertical surfaces over and including 10mm thick rendering in CM 1:4.
S&F glazed ceramic coloured tiles 7mm thick 600 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade etc over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.
Demolation of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any motar etc complete all as specified and directed.
M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20mm thick screed in CM 1:4 including cutting, polishing, rubbring & moulding of edges complete all as specified and directed.
Rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situation complete all as specified and directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15 mm thick other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed.
M&L for preparing new surfaces of walls and applying two coat of plastic emulsion paint (interior premium quality) including 2 mm thick wall care putty on new surface complete all as specified and directed.
M&L for preparing new surfaces of ceiling and applying two coat of plastic emulsion paint (interior premium quality) including 2 mm thick wall care putty on ceiling on new surface complete all as specified and directed.
M&L for preparing new surfaces of wall and applying two coat of plastic emulsion paint (exterior premium quality) on new/old surface complete all as specified and directed.
Dismantling textile covering including frames (if any) and cover fillets (measured flat and not girthed) complete all as specified and directed.
M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm, suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified and directed
Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges in large patches as in roof covering complete all as specified and directed. (Note:- Opening of existing wind tie where required for taking down of AC sheet is included)
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for cutting chases not exc 10 cm girth in brick wall and making good in CM 1:3 for embedding of AC sheet in wall complete all as specified and directed.
M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping steps bed blocks etc and including necessary formwork complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in bed block of hold fast, back filling of chowkhat etc complete all as specified and directed.
S&F pressed steel frames of size 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, (thickness of sheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified and directed.
S&F 30 mm thick flush shutters, solid core constructed with block board core and plywood face panels commercial type on both side complete all as specified and directed.
S&F factory made 35mm thick glazed and skeleton shutters made of second class hard wood, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in clause 8.24 (a) of Section 8 in SSR Part-I, kiln seasoned and chemically pressure treated, fixed to chowkat, complete all as specified & directed.
S&F 1st class hard wood plain solid straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed.
S&F 300mm for mild steel sliding door bolt plate type stove enameled black with sand or die cast not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plates and two on staple plate fixed complete all as specified and directed.
S&F mild steel barrel tower bolts, ISI market stove enamelled block with bright bolt and fixed complete all as specified and directed 200 mm long complete all as specified and directed.
S&F mild steel pressed handles, oval type ISI marked stove enamelled black complete all as 150mm size complete all as specified and directed.
S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of operturel 1.18 mm complete fixed stables complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed.
M&L for preparation of new or previously untreated wood or wooden surfaces any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed.
S&Fpowdwe coated aluminium powder coated frame work for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F 30 mm thick flush shutter, solid core construction, with block board core and plywood face pannels, commercial type on both sides incl 4.00 mm thick MDF board on both sides with adhesive and necessary fixtures including 0.9 mm thick decorative laminate type-1 both sides of shutter surface finish ,colour and pattern approved ,fixed with approved adhesive, complete all as specified and directed
S&F powder coated (min 50 micron) alumium glazed and wire gauged window shutters sliding type open three track section having size of style & top rails 83x44x1.5 mm, bottom rils 100x44x1.5 mm Make Jindal/Hindalco including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading screws, powder coated aluminium fittings complete and glazing shall be done by using 5.5 mm thick plain sheet glass (Make- Modi guard/Saint Gobin) and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesn incl powder coated aluminium grill (opening of grill not more than 100x100mm) fixed to windows or ventilators with powder coated aluminium U channel 25x12mm size complete all as specified and as directed.
S&F framed brackets of angles or tees with web and flanges cut to shape drilled and counter shank for screw including bending and welding angles as necessary gusset plates riveting etc n.exc 10Kg each brackets conforming to Fe 290 Gde - E - 165 complete all as specified and directed.
S&F framed work such as grills grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors ladder frame baluster and similar works conforming to Fe 290 Gde - E - 165 complete all as specified and directed.
Taking up or down GI tubing 15 mm bore pipe and connections removal for site complete all as specified and directed.
S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed.
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc complete all as specified and directed.
S&F 110 mm bore of pipe PVC (SWR) pipes 6Kg/Sqm single socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed.
S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes complete all as specified and directed.
Demolition of brick work of any type any position built in cement mortor in foul condition etc complete all as specified and directed.
M&L for brick work built in cement and sand mortar 1:6 with sub class 'B' old size bricks straight or curved on plan exc 6m means radius complete all as specified and directed.
S&F in repair coloured viterious china WC (ET) wall/floor mounted with dual flushing cistern incl all necessary fitting such as flush pipe waste pipe fixed as in repair of approved shade complete all as specified and directed. Make- Hindware/Parryware/Aquarries/Jaquar as approved by GE.
S&F for butt hinges medimum weigth cold rolled mild steel and fixed 100mm size complete all as specified and as directed.
S&F water closet seat cover white closed pattern with flat bottom & cover & mild steel chromium plated hinging device complete all as specified and directed.
S&F in repair PVC low level flushing cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.
S&F in repair viterious china coloured WHB 600 x 480 mm counter top oval shape cascade pattern with single hole basin mixer taps Cat part No 51011 of Jaquar, cast copper alloy capstan heads CP PVC connection, CP bottle trap cat part No 569 of jaquar and CP waste coupling 32mm dia in lead to waste pipe complete all as specified and directed .
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in CM on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including 32mm dia waste pipe of polythelene of low or high density, 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, making holes in walls for brackets and fixed in CM 1:3 or PCC 1:2:4 type B0, complete, including taking down old unserviceable sink incl 40mm dia Waste coupling of PTMT (half or full threaded) .(Minimum weight 32mm-45gms/40mm-60 gms) complete all as specified and directed.
S&F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.
S&F CP grating 125mm dia with waste hole (Minimium weight 40 grams) complete all as specified and directed.
S&F in repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides, complete all as specified and directed.
S&F in repair long body 15mm bore bib tap, cast copper alloy, chromium plated fancy type with capstan head, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed. Make:-Jaquar/Plumber/Essco
S&F in repair 15 mm dia chromium plated fancy type angle valve pipe with capstan head long screwed shank including cp cover plate etc complete all as specified and directed. Make:-Jaquar/ Plumber / Essco
S&F in repair 15 mm bore CP brass Central Hole Basin mixture fixed to GI pipe complete all as specified and directed. Make:-Jaquar/ Plumber / Essco
S&F in repair 15 mm bore brass CP wall mixer for mixing hot & cold water with provision for over head shower with arm and long bend pipe and wall flanged screwed down for iron pipe etc complete all as specified and directed. Make:-Jaquar/Plumber/Essco
S&F in repair hand shower (Health faucet) with 1.50 Mtr flexible tube with wall hook bracket etc, complete set of superior quality complete all as specified and directed.
S&F in repair CP shop dish fancy type fixed with SS screw on wall etc complete all as specified and directed.
S&F in repair toilet paper holder CP fixed complete all as specified and directed.
S&F in repair PVC bath cabinet with 4 mm thick loocking mirror of overall size 560 x 410 mm fixed on wall etc complete all as specified and directed.
S&F in repair glass corner self assembly, fancy type, made of 6 to 7mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed.
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.
S&F in repair CP brass tubular towel rail, 20mm dia, ‘D’ type, 60cm long between flanges, fixed to PVC rawl plugs with chromium plated brass screws, complete all as specified and directed.
S&F in repair 40mm bore PVC low density (LDPE) pipe of pressure 6kg/Cm2 fixed to wall or laid in floor, complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed.
S&F in repair cast iron floor trap/nahani trap plan with grating of 100 mm size including jointing to waste pipe with cement joints etc complete all as specified and directed.
Dismantling of cast iron drain pipe jointed in lead joints or cement joints and taking out of under floors if required complete all as specified and directed.
S&F 100 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in wall with cement joints complete all as specified and directed.
S&F 75 mm dia cast iron soil waste and vent pipes sand cast in any length with or without laid in trenches or in floor with cement joints complete all as specified and directed.
S&F in repair 100 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.
S&F in repair 75 mm bore cast iron bends with acces door of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.
S&F in repair 75 mm bore cast iron bends of any radius diminshing pieces or tappers (larger bore measured) complete all as specified and directed.
S&F 100 mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F 75 mm branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.
S&F PVC cabinate shutter as in kitchen with frame including shelves in required sizes at site made out of 18mm thick one side decorative lamination & other side balancing lamination sheet and provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets stainless screws etc. The panels shall be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish including all necessary fittings as per site requirementand as per make and specification mentioned as per drawing complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/cum.
M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of plastic emulsion paint (interior premium quality) including 2 mm thick wall care putty and a coat of primer on wall/ceiling etc complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces of ceilling and applying two coats of plastic emulsion paint (interior premium quality) on ceilling complete all as specified and directed.
S&F 6mm thick tempered glass (tinted) door shutter/partition of opening size less than 4.00 Sqm in single leaf with necessary eatching including and pivot at top fance type glass handle of size not less than 300 mm on both sides of shutter to match with colour of glass shutter top and bottom alyminium rail with suitable locking arrangement and all necessary fitting complete all as specified and directed.
Demolition of cement concrete (below or above ground level) not exc 15 cm thickness complete all as specified and directed.
M&L for 75mm thick cement concrete type C2, 1:3:6 (40mm graded stone aggregate) as in sub-floors, sub-bases, etc. complete all as specified and directed.
M&L for chequred cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 20 mm screed bed in CM 1:6 complete all as specified and directed.
S&F 18-20mm thick kota stone jointed and pointed in neat cement sturry with pigment to match over and including 20mm thick screed bed in CM 1:4 including bee wax polishing complete all as specified and directed.
S&F in repair 15 mm dia bore stop valves cast copper alloy chromium plated fancy type with long shank & cup (concealed type) complete all as specified and directed.
S&F Harrison rails, stainless steel with fixing brackets, stops, rollers etc complete all as specified and directed.
S&F for mild steel work in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc,.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
M&L for cement concrete type B2, 1:2:4 using 40 mm graded stone aggregate as in embedding of fencing post etc complete all as specified and directed.
S&F 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof wall etc fixed with L type or J type or cranked hook bolts complete all as specified and directed.
S&F 125 mm butt hinges extruded brass with mild steel hinge pin bright polished and fixed type B-II complete all as specified and directed.
S&F Brass handle extruded fabricated type polished 150 mm long complete all as specified and directed.
S&F 200 mm long brass barrel tower balt extruded section complete all as specified and directed.
Taking up or down steel water tubing and connections of 20 mm bore fixed in walls ceiling floors trenches etc complete all as specified and directed.
S&F GI tubing 20 mm bore medium grade galvanized with all fitting and fixed to walls & celing or laid in floor complete all as specified and directed.
S&F brass sliding door bolt 300 mm long fixing bolts and sliding bolt with rolled or drawn brass bolt complete all as specified and directed.
M&L for Bees-wax polishing on kota stone surfaces ,width or girth including cleaning and preparing the previously polished old surface complete all as specified and directed.
M&L for applying two coat of melamine wood polish on new wooden surfaces including preparation of surfaces with sealer/filler etc to have smooth and glossy finish surface to the entire satisfaction of GE complete all as specified and directed.
Taking down carefully copper/aluminium point wiring ( light, fan, socket , bell or power) complete including all electrical fittings & fixtures(DBs,submain,cables etc) and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall complete all as specified and directed.
Material and Labour for point wiring complete with 1.5 sqmm (nominal area) FRLS grade PVC insulated, unsheathed multi stranded copper conductor single core cable 1100 volts grade in and including PVC conduit with accessories including 1.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor and connected to common earth dolly for One light/Ex-fan point controlled by one switch 5Amps SP complete all as specified and directed. Note :- Sunken box/cover plate for modular switches, sockets etc will be measured and paid seperately under relevant items and blank plate required if any will be deemed included in the item rate.
All as per Item No 99 hereinbefore but for one 5 A socket outlet on independent board all as specified and directed.
All as per Item No 99 hereinbefore but for one 5 A socket outlet on same board all as specified and directed.
All as per Item No 99 hereinbefore but point wiring complete with 2.5 sqmm for 3 pin 15 A socket outlet on independent board including 2.5 sqmm FRLS grade PVC insulated unsheathed stranded copper conductor cable for earth continuity conductor all as specified and directed.
S&F switch piano flush type 5 Amps SP, one way complete all as specified and directed.
S&F modular metal flush box, including inner plate & white cover plate with frame, 2 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.
S&F modular metal flush box, including inner plate & white cover plate with frame, 3 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.
S&F modular metal flush box, including inner plate & white cover plate with frame, 6 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.
S&F modular metal flush box, including inner plate & white cover plate with frame, 8 modules complete all as specified and directed. Make - Crabtree or equivalent in Havells/Anchor/ Roma.
S&F terminal box suitable one modular plat of size 75X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
S&F terminal box suitable three modular plat of size 100X75x50 mm including cutting, grooving and plastering etc. all as specified and directed.
S&F modular switch one way 6A 230V AC 50 HZ SP one module complete all as specified and directed.
S&F modular switch one way 16A 230V AC 50 HZ SP one module complete all as specified and directed.
S&F modular socket 2/3 pin combined 6A 230V AC 50 HZ SP two module complete all as specified and directed.
S&F modular socket 6A/16A 2/3 pin combined 230V AC 50 HZ SP two module complete all as specified and directed.
S&F in replacement of single side connection LED T8 tube light rod 20 Watt, 6500K of four feet long into and including LED tube light fixture of four feet long with T8 push fit type holders, connector block, end caps, etc including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified and directed. Make : Crompton, Cat No : IGP131LT8-16& LT8-20-865-2 or Havells, Cat No : REGALBATTENT8UPT01X22WSSBS & PHOTONULTRA1213T8SSTL20WLED865SPC / Philips cat no TMC 501P1XT-LED22W P 3241
S&F decorative wall mounted fancy light fitting made up of polycarbonate; sutable for retrofit CFL 15W (Spiral B-22 base) & including one No. retrofit CFL 15W spiral type including LED Bulb complete all as specified.
S&F in replacement lamp holder bakelite with back plate suitable for batten fittings complete all as specified and directed.
S&F ceiling fan regulator electronic Stepped type for 1200/1400 mm sweep complete all as specified and directed.
S&F in repair LED bulk head light fitting with 10 Watt LED bulb complete all as specified and directed.
S&F in repair 10 watt LED Mirror light fitting complete all as specified & directed. Make CG cat pat No-LDL-10-WW or equivalent of Bajaj/philips.
S&F LED building security light 36W IP 65 including one number MS clamps made of 25X3 mm flat iron with bracket of GI pipe light grade 25mm dia and length not less than 1.2 mtr end of GI pipe suitable for street light fitting, connecting with three core copper flexible wire 23/0.0076 complete all as specified and directed. Make Philips/CG/Bajaj
S&F LED wall/surface mounted down lighter, 12 W including electrical connection with PVC three core copper flexible wire & all necessary fixing accessories complete all as specified. Make:- Crompton Model-LCDSPLN-R12-CDL or equivalent in Havells/Philips/Bajaj as approved by GE.
S&F in repair MCB DB TPN (double door) 4 Ways, 415 Volts including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.
S&F in repair MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall complete all as specified and directed.
S&F in replacement MCB, single pole, 240 Volts, curve 'C' of capacity (6-32 Amps) as ordered breaking capacity 10 KA complete all as specified and directed.
S&F in repair MCB SPN, 40 to 63 Amps, 240 Volts, curve 'C' of breaking capacity 10KA complete all as specified and directed.
S&F in replacement isolator four pole 415 volts, 100 Amps, curve 'C' of breaking capacity 10KA complete all as specified and directed.
S&F MCCB DB VTPN 8 way double door type suitable for TP/FP including necessary dummy plate and necessary civil works complete all as specified and directed. Make: Havells Cat No DHDLVDRWAOFO08 or equivalent in Legrand/ L&T as approved by GE.
S&F sub main wiring in existing conduit for main DBs to Sub DBs with PVC insulated & unshaethed two runs of 10 sqmm single core multistrand copper conductor cable, 1100 Volts grade alongwith one run of 10 sqmm PVC insulated & unshaethed copper conductor cable, 1100 Volts grade, connected to common earth dolly as earth continuity conductor, . Note : (a) three runs of 10 sqmm cable shall be constitute one unit. Make of cable: Havells/ polycab/RR Cable
M&L for sub main wiring with PVC insulated unsheathed cable with copper conductor multi strand 2 single core 4 sq mm and one run of 4.0 sq mm PVC insulated green colour earth continuity wire drawn through in and including 25 mm dia PVC concealed conduit complete all as specified and directed. (Note:- Three run of 4 Sqmm cable and one run of 25mm dia PVC conduit shall be constitute one unit).
M&L for sub main wiring with 06 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 06 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces complete all as specified & directed. (Note:- Three run of 6 Sqmm cable and one run of 25mm dia PVC conduit shall be constitute one unit).
S&F exhaust fans single phase 230/240 volts heavy duty metalicbody of size 300 mm sweep 1400 RPM ISI marked, and making connection with twisted copper flexibelwire 23/0.076 mm complete all as specified and directed. Make/Model:- Havells Turbo Force SP / Almonard 300 mm Heavy Duty/Usha Turbo Heavy Duty
S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20amps SPN MCB complete all as specified and directed.
Cutting chases in concrete wall/stone for laying PVC conduit and making good to facings where required and pointing in CM 1:3, and making good, cutting not exc 20 cm girth complete all as specified and directed.
M&L for earthing complete with galvanised steel earth plate electrod 60cmx60cmx6mm thick burried directly in ground ( earth ) pit not less than 2.25mtr below normal ground ( level ) connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts nuts check nuts and washers of galvanaised iron or steel including PCC pit in 1:2;4 type B-1 RCC cover with suitable handle and angle iron 40x40x5mm frame, excavation and earth work in any type of soil, medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade protetion pipe 15mm bore upto main board complete as shown on electrical plate No 5 of MES Sch 1991 ( part-I) and testing and complete all as specified and directed.
QUALITY CONSTRUCTIONS CO
KUMAR ENTERPRISES
M/S S S A ASSOCIATES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .