REPAIR MAINT AND REPLACEMENT OF VARIOUS SPLIT AC AC PLANT AND OTHER COOLING APPLIANCES LIGHTING CONDUCTOR AND MISC ALLIED WORKS AT CQA A CAN AND SQAE UNDER AGE EM II CENTRAL OF GE CENTRAL KHADKI

Amount

M & L for Copper piping 5/8" (18/20 gauges) with necessary fitting such as elbow bends sockets and tee's , clamps and supports on wall and grounds complete all as specified and directed by Engr-in-charge

M & L for Copper piping 1/2" with necessary fitting such as elbow bends sockets and tee's , clamps and supports on wall and grounds or frame etc. complete all as specified and directed by Engr-in-charge

M & L for Copper piping 1/4" with necessary fitting such as elbow bends sockets and tee's , clamps and supports on wall and grounds complete all as specified and directed by Engr-in-charge

M & L for Copper piping 5/8" superlone insulation with necessary fitting such as elbow bends sockets and tee's , clamps and supports on wall and grounds complete all as specified and directed by Engr-in-charge

M & L for Copper piping 1/2" superlone insulation with necessary fitting such as elbow bends sockets and tee's , clamps and supports on wall and grounds complete all as specified and directed by Engr-in-charge

M & L for Copper piping 1/4" superlone insulation with necessary fitting such as elbow bends sockets and tee's , clamps and supports on wall and grounds complete all as specified and directed by Engr-in-charge

Labour for Shifting of split type air conditioner and fixing of air conditionercomplete all as specified and directed by Engr-in-charge

M&L for core cutting/drilling/chease cutting of wall up to 18 inch suitable for split type ac as per site requirment complete all as specified and directed by Engr-in-charge

Disconnecting split/window type AC (Outdoor+Indoor unit) 1.5/2 TR electrically/mechanically and lowering to the ground fixed in any position for servicing/repairing/overhauling/cleaning, and cleaning filters, checking of electrical wiring, cleaning of dust by blower and washing with washing soda including replacement of unserviceable, burnt out spare parts to make it fully functional, after repair and re-installation and testing on full load including transporting to workshop and back to site complete all as specified and directed by Engr-in-charge. Note :- Item replaced will be measured and paid separately.

M & L for cleaning gas system of split AC/Window type AC with carbon tetra chloride chemical & flushing with Nitrogen including brazing/testing and commissioning complete of size 1.5/2 Ton capacity complete all as specified and directed by Engr-in-charge

M & L for cleaning of gas system of the water cooler/ refrigerator with carbon tetra chloride chemical & flushing with Nitrogen including brazing/testing and commissioning complete of capacity 40/80/100/120 ltrs complete all as specified and directed by Engr-in-charge.

M & L for charging Refrigerent R-22 complete of size 1.5/2 Ton capacity complete all as specified and directed by Engr-in-charge

M & L for charging Refrigerant R-32 complete of size 1.5/2 Ton capacity complete all as specified and directed by Engr-in-charge

M & L for charging Refrigerent R-134 complete for Water cooler capacity 40/80/100/120ltr and Refrigerator any capacity ltrs complete all as specified and directed by Engr-in-charge

M&L for replacement of unserviceble & damaged burnt blower motor/fan motor Window/Split AC of capacity 1/6 HP complete all as specified and directed by Engr-in-charge

M&L for replacement of unserviceble & damaged burnt blower motor/fan motor Window/Split AC of capacity 1/4 HP complete all as specified and directed by Engr-in-charge.

M&L for replacement of unserviceble & damaged burnt blower motor/fan motor of Water cooler of capacity 1/8 HP complete all as specified and directed by Engr-in-charge

M&L for replacement of unserviceble & damaged burnt blower motor/fan motor Window/Split AC of capacity 1/3 HP complete all as specified and directed by Engr-in-charge

M&L for replacement of unserviceble & damaged burnt blower motor/fan motor Window/Split AC of capacity 1/2 HP

Disconnecting Water cooler of 60/40/80/100/120 Ltr electrically/mechanically for repairing/overhauling/cleaning, checking of electrical wiring, cleaning of dust by blower including replacement of unserviceable, burnt out spare parts such as relays thermostates etc to make it fully functional, after repair and re-installation and testing including transporting to workshop and back to site complete all as specified and directed by Engr-in-charge Note :- Item replaced will be measured and paid separately.

S&F for micro processor printed circuit board comlete suitable for split type AC of 1.5/2 TR as suitable for existing make/model and capacity 1.5/2 Ton and all as per existing complete all as specified and directed by Engr-in-charge.

Disconnecting and taking out old defective Hermetically sealed compressor unit as required for AC/water coller/refrigerator and M&L for fixing new compressor (new sealed unit only) with nut bolt, washer antivibrating bush , brazing work, pressure testing for leakage, vaccumnsing and gas charging etc of capacity 1.5 TR for window/Split AC of the existing makes complete all as specified and directed by Engr-in-charge

All as per item no 22 above but of capacity 2 TR for window/split AC complete all as specified and directed by Engr-in-charge

All as per item no 22 above but suitable for Water cooler of capacity 40ltrs complete all as specified and directed by Engr-in-charge

All as per item no 22 above but suitable for Water cooler of capacity 60ltrs complete all as specified and directed by Engr-in-charge

All as per item no 22 above but suitable for Water cooler of capacity 80ltrs complete all as specified and directed by Engr-in-charge

All as per item no 22 above but suitable for Water cooler of capacity 100/120ltrs complete all as specified and directed by Engr-in-charge

S & F in replacement thermostate suitable for water cooler/ refrigerator/ AC of any type and any model complete all as specified and directed by Engr-in-charge.

M&L for replacement of overload protection relay for window AC, water cooler and refrigerator of make and model as per existing complete all as specified and directed by Engr-in-charge.

M&L for replacement of starting relay for window A/C water cooler & refrigaretor of make and model as per existing complete all as specified and directed by Engr-in-charge.

S & F in replacement of running capacitor 10 MFD , 440 V complete all as specified and directed by Engr-in-charge

S & F in replacement of running capacitor 25 MFD, 440V complete all as specified and directed by Engr-in-charge

S & F in replacement of running capacitor 36 MFD, 440V complete all as specified and directed by Engr-in-charge

S & F in replacement of running capacitor 40/45 MFD, 440V complete all as specified and directed by Engr-in-charge

S & F in replacement of starting capacitor 60 MFD, 440V complete all as specified and directed by Engr-in-charge

S & F in replacement of starting capacitor 80/100 MFD, 440V complete all as specified and directed by Engr-in-charge

S & F in replacement of starting capacitor 120 MFD, 440V complete all as specified and directed by Engr-in-charge

S & F in replacement of PVC float valve for water cooler of size 15mm dia complete all as specified and directed by Engr-in-charge

S & F in replacement of dry air filtter for AC/water cooler/refrigerator complete all as specified and directed by Engr-in-charge

S & F in replacement of capillary copper/MS/PVC tubing of any size not less than 0.5 mtr for AC/Water cooler/refrigerator complete all as specified and directed by Engr-in-charge

S & F for PVC drain pipe suitable for water cooler outlet of any capacity complete all as specified and directed by Engr-in-charge

S & F in replacement 3 pin plug top of capacity 15 amp , 240V, 50HZ complete all as specified and directed by Engr-in-charge

S & F of Copper Condenser unit assembly for window AC with all accessories complete of capacity 1.5/2 ton complete all as specified and directed by Engr-in-charge.

S & F in replacement of suction brass valve for split AC of any capacity complete all as specified and directed by Engr-in-charge

S & F for PVC drain pipe 20mm suitable for split AC out let of 1.5T/2.T capacity complete all as specified and directed by Engr-in-charge.

S & F in replacment of discharge brass valve for split AC of any capacity complete all as specified and directed by Engr-in-charge.

Replacement of rubber gasket for lid top of any size for water coolers complete all as specified and directed by Engr-in-charge.

S&F for hermetically sealed unit new Compressor by dismantling burnt out u/s Compressor suitable for refrigirators with bushes, sleeves, washers nut and bolt for Compressor foundation legs, relay terminal cover clips and including cutting, brazing, leak detection, charging refrigerent and commissioning testing for 165 - 200 ltr capacity complete all as specified and directed by Engr-in-charge.

Disconnecting Electric conection, removing/transporting the unsv water cooler of capacity 40 ltrs to 120 Ltrs to workshop for painting work which includes removing the existing deteriorated/rusted body for paint by scrapping and filling of cavaties with filler spray, denting/ welding, patch work with existing size of MS sheet and painting the body with synthetic enamel paint two coats over a coat of redoxide and marking the SM/MES No (of reqd size and shape) with black paint complete all as specified for as directed by Engr-in-Charge.

S & F voltage stablizer of capacity 2 KVA complete all as specified and directed by Engr-in-charge.

S&Fof Heavy duty air conditioner outdoor unit stand/ brackets with complete accessorise for windos/split AC of capacity of 1.5/2 Ton complete with grouting nut bolts complete all as specified and directed by Engr-in-charge

S & F in replacment of Copper Condenser unit assembly for Outdoor Unit with all accessories suitable for split AC of capacity 1.5/2 ton complete all as specified and directed by Engr-in-charge.

Dismantling of old split type air conditioner indoor unit and Supply , installation and testing Indoor unit of split type air conditioner complete with cordless remote control and with in built air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 Ton with wall mounted fixing plate suitable size incl breezing work for fixing existing site complete all as specified and directed by Engr-in-charge . Note : The necessary addition/alteration which needs to be carried out to fix the new unit with the old system is included in above rate.

Disconnecting and taking down unserviceable/damage outdoor unit cover of split air conditioner of capacity 1.5 Ton and dismantaling of compressor ,condenser unit,wiring,fan motor from outdoor cover and supply and fixing new outdoor cover with replacement of unserviceable spare parts such as capacitor ,control wiring and refixing compressor ,condenser unit,wiring,fan motor to make it fully functional, after repair and re-installation as per existing and testing complete all as specified and directed by Engr-in-charge. Note :- (i) Items as declared unservicable by Engineer in charge shall be measured and paid separately. (ii) The necessary addition/alteration which needs to be carried out to fix the new unit with the old system is included in above rate.

S&F for sub main wiring of two single core FRLS-H PVC insulated unsheathed stranded copper conductor cables of size 4 Sqmm, 1100 volts grade, drawn through and including 20 mm dia PVC surface conduit of 1.2 mm wall thickness including all fixing accessories, and 4 sqmm PVC insulated multi stranded copper conductor cable as earth wire connected to earth dolly complete all as specified and directed by Engr-in-charge . Note:- Both running cables including earth wire including one run pvc conduit pipe shall be measured & paid for as single length.

S&F for sub main wiring of two single core FRLS-H PVC insulated unsheathed stranded copper conductor cables of size 6 Sqmm, 1100 volts grade, drawn through and including 20 mm dia PVC surface conduit of 1.2 mm wall thickness including all fixing accessories, and 6 sqmm PVC insulated multi stranded copper conductor cable as earth wire connected to earth dolly complete all as specified and directed by Engr-in-charge . Note:- Both running cables including earth wire including one run pvc conduit pipe shall be measured & paid for as single length.

S&F for MCB's 240V confirming to IS of rating 6A to 32A SP, ' C' Series, 10 KA breaking capacity complete all as specified and directed by Engr-in-charge

S&F for sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket complete with one no MCB SP , 20 Amps , 230 volts complete all as specified and directed by Engr-in-charge .

S & F in repairs First Aid Box at E/M installations to keep the first aid items i.e. Tube of bernol, Bandage, one small snizer, banded etc, the box made out of GI sheet of 18 gauge of size 30 cm X 25 cm x 20 cm with openable window & writing letters "FIRST AID" with thick red paint and fixed on wall at height not less than 2 mtr complete all as directed and specified by Engineer- In- Charge.

S&F in repair CI Pot Strainer/ Y Stainer with matching flanges, gasket, hardware for upto 150mm bore all as specified and directed of following sizes as per site requirment complete all as specified and directed by Engr-in-charge.

S & F in replacement installation informatory boards at E/M installation to display the technical details i.e size of the board 150 cm x 120 cm fixed on wall above 1.2 mtr above ground level with & including proper fixing arragement complete all as specified and directed by Engr-in-charge Note : Technical details as per direction of Engr-in-charge.

Disconnecting water connections to the condenser of package/central A/C plant 50 TR by dismantling the both end cover of condenser. Descaling the condenser of compressors with dilute sulphuric acid , flushing/cleaning with brush and water, re-fixing the side cover with new gasket nut / bolts and detect leakage complete all as specified and directed by Engr-in-charge . Note : Dilute sulphuric acid for descaling is deemed to be included in the quoted rates .

M & L for Servicing/Cleaning of FRP cooling tower of 50 TR by dismantling top cover, fan with fan motor and removing the honey comb frills. Cleaning of base tray & frills, pot strainer etc. servicing of fan motor with changing of bearings and greesing refixing the fan, frill & top cover testing commissioning complete all as specified and directed by Engr-in-charge . Note : Spares as required during the servicing and repairs as declared unservicable by Engr in charge shall be mesured and paid under relavant items of this schdule.

Disconnecting/Isolating the compressor of make :- Voltas 05060S model from the system by putting plates to the suction and discharge valve opening of the compressor. Dismantling the compressor completely by taking down the crank shaft. Removing unserviceable internal parts cleaning overhauling complete replacement of worn out parts such as suction reed, discharge reed, cylinder liners, loading/unloading system of compressor, washers, nut bolts, gaskets shaft seal, "O" rings, cutting, metalizing, grinding, balancing the crank shaft and reassembling the compressor including changing the compressor oil, leak testing with nitrogen, repairing leakages and charging R-22, gas, testing/comissioning complete for following compressor make Accel sabro/Kirloskar, complete all as specified and directed by Engr-in-charge. Note : Spare parts , R-22 gas, compressor oil and nitrogen gas shall be measured and paid separately under respective items.

S&F in replacement of following spares for compressor make :- Voltas 05060S model complete all as specified and directed by Engr-in-charge. a) Piston

b) Piston ring

c) Pisotn pin

d) Shaft seal assembly

e) Discharge valve reeds

f) Loading Unloading Frame

g) Main bearing Bush

h) CR bearing

j) Gasket set for 05060S

m) Aluminium washer set

n) Oil pump assembly

o) Oil ring

p) O Ring set

q) Solenoid valve for loading & unloading

r) Split pin

s) Sunction valve reed

t) Thrust collor

u) Oil filter

v) Cylinder liner

w) Oil drain valve

x) Bushing for connecting rod

Supply and filling nitrogen gas for leak testing of central & package A/C plants complete all as specified and directed by Engr-in-charge.

Supply and filling of R-22 Gas in central & package A/C plantscomplete all as specified and directed by Engr-in-charge

Supply and fillling compressor oil suitable to air conditioning plants compressor and taking out old dirty compressor oil, cleaning the crank case and oil filter complete all as specified and directed by Engr-in-charge.

S&F in replacement of defective brassomatic pressure releas valve of suitable size for 300 PSI refrigerent gas pressure complete all as specified and directed by Engr-in-charge

S&F in replacement of over load relays type MN relay range 14-23 A complete all as specified and directed by Engr-in-charge.

S&F in replacement of over load relays type MN relay range 24-40 A complete all as specified and directed by Engr-in-charge

S&F of MCCB 63 Amps 25KA, TP (ICS=100%ICU) with Adjustable thermal magnetic release in the control panels including dismantling of old unsv MCCBs/SFU fuse unit complete all as specified and directed by Engr-in-charge.

S&F of MCCB 100 Amps 36KA, TP (ICS=100%ICU) with Adjustable thermal magnetic release in the control panels including dismantling of old unsv MCCBs/SFU fuse unit complete all as specified and directed by Engr-in-charge

S&F of MCCB 125 Amps 36KA, TP (ICS=100%ICU) with Adjustable thermal magnetic release in the control panels including dismantling of old unsv MCCBs/SFU fuse unit complete all as specified and directed by Engr-in-charge.

S&F of MCCB 200 Amps 36KA, TP (ICS=100%ICU) with Adjustable thermal magnetic release in the control panels including dismantling of old unsv MCCBs/SFU fuse unit complete all as specified and directed by Engr-in-charge

S&F of MCCB 250 Amps 36KA, FP (ICS=100%ICU) with Adjustable thermal magnetic release in the control panels including dismantling of old unsv MCCBs/SFU fuse unit complete all as specified and directed by Engr-in-charge. Note : For item No 18.00 to 23.00 - (i) All cable connections should be done with supply and fixing suitable size lugs/thimble etc. (ii) Any addition / alteration to sheet metal enclosure existing panel for fixing of MCCBs and removal of old u/s switch gear is deemed to be included in the rates quated.

S&F in replacement of following spares for central AC plant 100TR complete all as specified and directed by Engr-in-charge (a) Indicating lamps RYB - 01 Set

(b ) 'V ' belt of size / No A 1052 LP/A 40

(c )'V ' belt of size / No A 925 Lp/A 35

(d ) Power Contactors ML A2

(e ) Power Contactors MNX 12

(f ) Power Contactors MNX 18

(g ) Power Contactors MNX 45

(h )Power Contactors MNX 70

Labour only for detection of leakage and repairing of central type AC Plant of capacity 50 TR capacity by leak testing, leak repairing, pressure testing with nitrogen, vaccumising complete system of central type AC plant with double stage vaccume pump of atmospheric pressure less than 28 to 30mm/HG and charging of refrigerant gas upto required pressure after satisfactory results. Note :- Nitrogen gas and refrigerant will be measured and paid separately.

Dismantling of Air Handling Unit of any capacity with complete accessories such as cooling coil ,air filters,blower motor, blower / drum ,blower shaft,side panels , and wall opening if required etc including removing of electric connection and dismantling of pipe work of any size and type by using gas cutter or Electric cutter complete all as specified and directed .

Re-assembling/Refixing the complete Air Handling Unit of any capacity after carring out cleaning, servicing to cooling coil, blower & filters by using CTC solution including remetling ,fine grinding blower shaft and hardening balancing , realignment to AHU shaft, replacing unserviceable blower fins ,replacing bearings 2 Nos including inlet out let pipe welding,all electric connections and testing and commissioning all as specified and directed by Engr-in- Charge

S&F Cast iron Sluice valves class PN 1.6 of size 150mm dia (6") stainless steel spindle incl gasket , nutbolts,handle with cuting of ci pipe fabrication work as per site requirment & incl removal of Unsv Sluice valves complete all as specified and directed Engr-in-Charge.

S&F Cast iron Sluice valves class PN 1.6 of size 100mm dia (4") stainless steel spindle incl gasket , nutbolts,handle with cuting of ci pipe fabrication work as per site requirment & incl removal of Unsv Sluice valves complete all as specified and directed Engr-in-Charge.

S&F Cast iron Sluice valves class PN 1.6 of size 80mm dia (3") stainless steel spindle incl gasket , nutbolts,handle with cuting of ci pipe fabrication work as per site requirment & incl removal of Unsv Sluice valves complete all as specified and directed Engr-in-Charge.

S&F liquid line valve/discharge line valve of size 40mm as per existing including providing Gasket/Teflon/bushing to both side sheet, suitable for 40 mm dia pipe line including brazing/welding,fixing complete all as specified and directed by Engr-in-charge

S&F liquid line valve/discharge line valve of size 25mm as per existing including providing Gasket/Teflon/bushing to both side sheet, suitable for 25 mm dia pipe line including brazing/welding,fixing complete all as specified and directed by Engr-in-charge

S&F liquid line valve/discharge line valve of size 20mm as per existing including providing Gasket/Teflon/bushing to both side sheet, suitable for 20 mm dia pipe line including brazing/welding,fixing complete all as specified and directed by Engr-in-charge

S&F thermostate expansion valve of suitable size for 50TR capacity air conditioning plants including taking down the unserviceble valve complete all as specified and directed by Engr-in-charge.

S&F water pressure gauge 0-7 Kg/Sqm including taking down the unserviceble gauge complete all as specified and directed by Engr-in-charge.

S&F refrgerant pressure gauge 30 to 150 PSI including taking down the unserviceble gauge complete all as specified and directed by Engr-in-charge.

S&F in replacement of pressure release valve of condensor 3/8" BSP threaded suitable for 300 PSI complete all as specified and directed by Engr-in-charge

S&F in replacement of DB/WB thermometer wall mounted with the facility of RH readings all as per existing complete all as specified and directed by Engr-in-charge.

Taking down carefully and overhauling of Monoblock pump set by disconnecting the pump from foundation and pipe line, dismantling of shaft from the pump, replacing the unserviceable wornout bearing, gland packing, seal and bushing and assembling after repairs complete testing for the pump of Capacity 7.5 HP to 10HP complete all as specified and directed by Engr-in-charge . Note : All the reqd spares for the repair is in involved in the above cost .

M & L in replacement of 50mm bore GI pipe medium grade incl all fitting and acessoriescomplete all as specified and directed by Engr-in-charge.

M & L in replacement of 40mm bore GI pipe medium grade incl all fitting and acessories complete all as specified and directed by Engr-in-charge.

M & L in replacement of 25mm bore GI pipe medium grade incl all fitting and acessories complete all as specified and directed by Engr-in-charge.

M & L in replacement of 20mm bore GI pipe medium grade incl all fitting and acessories complete all as specified and directed by Engr-in-charge.

S&F Gate Valves (Brass Insert) of 50 mm bore, ISI marked , heavy duty incl taking down old one complete all as specified and directed by Engr-in-charge.

S&F Gate Valves (Brass Insert) of 40 mm bore, ISI marked , heavy duty incl taking down old one complete all as specified and directed by Engr-in-charge.

S&F Gate Valves (Brass Insert) of 25 mm bore, ISI marked , heavy duty incl taking down old one complete all as specified and directed by Engr-in-charge.

S&F Gate Valves (Brass Insert) of 20 mm bore, ISI marked , heavy duty incl taking down old one complete all as specified and directed by Engr-in-charge.

S&F float valve/ball type assemblt complete of size 20 mm size dia complete all as specified and directed by Engr-in-charge.

Painting of CI/GI/MS pipes of Air / Water distribution of size 100 / 80 mm dia along with side supports complete with two coats of synthetic enamel paint all as per colour code directed by Engr-in-Charge.

M&L painting to cooling tower inside and outside with one coat of primer and one coats of epoxy paint of approved colour including scapping out the old paint complete all as specified and and directed by Engr-In-charge.

M&L for preparation of surfaces for painting of compressor unit of capacity up to 100 TR with motor, one coat of synthetic enamel paint including painting to suction line, discharge line, liquid line , guard base foundation etc. complete all as specified and directed by Engr-in-charge.

M & L for Mild Steel brackets, frames ,supports, channels and stands of type as required at site made out of angle iron, flat or strip of grade Fe-410-S of any size as per site requirement for PGI air duct etc complete all as specified and as directed by Engr-in-charge .

S & F double nitted polymer fabric HDPE fresh air filter washable/cleanable type having efficiency 95% to 99% down to particle size of 5 to 20 micron, fabricated out of CRCA sheet metal duly painted with two coat of grey hammer tone spray painted over two coats of red oxide primer, with lifting handle, Box/flanged type, aluminium spacer etc, of sizes 610 x 610 x 50 mm complete all as specified and directed by Engr-in-charge.

Supply , laying,commissioning and testing XLPE insulated ,armoured heavy duty electric cable Aluminium conductor, 1100 volt cross sectional area 70 Sqmm 3.5 core incl removing unserviceable/old cable complete all as specified and directed by Engr-in-charge.

Supply , laying,commissioning and testing XLPE insulated ,armoured heavy duty electric cable Aluminium conductor, 1100 volt cross sectional area 50 Sqmm 3.5 core incl removing unserviceable/old cable complete all as specified and directed by Engr-in-charge.

Supply , laying,commissioning and testing XLPE insulated ,armoured heavy duty electric cable Aluminium conductor, 1100 volt cross sectional area 25 Sqmm 3.5 core incl removing unserviceable/old cable complete all as specified and directed by Engr-in-charge.

Supply , laying,commissioning and testing XLPE insulated ,armoured heavy duty electric cable Aluminium conductor, 1100 volt cross sectional area 16 Sqmm 4 core incl removing unserviceable/old cable complete all as specified and directed by Engr-in-charge.

Material and Labour for for disconnection/dismantling of electric motor 3 Phase, 415 Volt, from installation & transporting to workshop for rewinding , taking out old unserviceable burnt winding and rewinding the same with super enamelled copper wire 'H' Class of same size to get the same output of motor including material such as varnish, sleeves, leothariod paper etc and refixing the same in position with proper alignment, balancing and testing of capacities 7.5 HP to 12.5 HP complete all as specified and directed by Engr-in-charge.

M & L for for disconnection/dismantling of electric motor 3 Phase, 415 Volt, from installation & transporting to workshop for rewinding , taking out old unserviceable burnt winding and rewinding the same with super enamelled copper wire 'H' Class of same size to get the same output of motor including material such as varnish, sleeves, leothariod paper etc and refixing the same in position with proper alignment, balancing and testing of capacities 40 HP to 60 HP complete all as specified and directed by Engr-in-charge.

M & L for fabrication and installation of glow Sign board (640 cm x 91cm x 25cm) made of Flex/Acrylic board, with computer imaging matter is directed by engr-in charge at one side of the board, GI plain sheet, cubicle housing having with intenal tube light fitting arrangement to open the flex/Acrylic board and suitable for mounting on wall/ gate complete all as specified and directed by Engr-in-charge. Note :- The cost of Fabrication and welding work is included in the quoated rate .

M & L for fabrication and installation of Sign board (240 cm x 91cm x 25 cm) made of Flex/Acrylic board, with computer imaging matter is directed by engr-in charge at one side of the board, GI plain sheet, cubicle housing having arrangement to open the flex/Acrylic board and suitable for mounting on wall complete all as directed by engr-in-charge. Note :- The cost of Fabrication and welding work is included in the quoated rate .

S&F for hony comb frills ( of FRP cooling tower of any capacity by dismantling top and bottom honey comb frills size of frill as per site requirment, testing commissioning complete all as specified and directed by Engr-in-charge. Note :- The cost all required material is included in the quoted rate .

S&F for Mild steel pipe heavy grade of 100 mm dia with all fitting laid in floors and fixed to walls and ceilings etc of sizes as shown complete all as specified and directed by Engr-in-charge

S&F for steel pipe heavy grade of 80 mm dia with all fitting laid in floors and fixed to walls and ceilings etc of sizes as shown complete all as specified and directed by Engr-in-charge

T.H.ASSOCIATES (BID ID -3450994)

M/S. Niksun Electro-Infra Private Limited (BID ID -3450561)

Bidder Name

T.H.ASSOCIATES

M/s Vijay Airconditioning Pvt Ltd

M/S. Niksun Electro-Infra Private Limited