SPL REPAIR TO BLDG NO T-11A T-11B T-12A T-12B T-21A T-21B, T-26A T-26B T-28A T-28B AT PLASSEY LINES AND BLDG NO EW-2 2 3 4 EW-8 JCOOR MD ACCN OF 1 JAK LI AT MORABADI POCKET OF RANCHI MIL STN

Amount

Dismantling of AC sheet (corrugated or semi corrugated etc) including AC ridges as in roof covering complete all as specified and directed.

S&F Pre-painted galvalum alm zink coating GI based corrugated/ semi - corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering fixed with coach screw as per manufacturers instrution complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering as ridge/cladding to wall, fixed with self tapping screws complete all as specified and directed

Taking down roof trusses, coupled rafters or trussed beams above 4 mtr & up to 8 mtr span, in any position.

Dismantling timber scantling unframed 40sqcm and over in section, in any position.

S&F joist chanel, angle , or tee section fixed independently, without connecting plates, etc complete Fe 410-W(Gde E-250) quality-A.

Dismantling of wall and Ceiling boards (fibre,pulp insulation,etc) or insulation boards/slabs/blankets,any thickness,including cover fillets

M&L providing aluminium snap Grid frame work for false ceiling with of size 605x605 mm using Main and cross tee of size 36.5mmx25mmx1.4mm weighing 0.24 kg/RM and 23.5mmx26.4mmx1.4mm weighing 0.191Kg/RM respectively the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmx25mmx2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceilling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified and directed

M&L 4mm thick non asbestos fibre cement building designer ceilling board/E-board of size 600X600 fixed or laid/inserted to timber/GI/Aluminium framework with screws .

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M&L roughening surface of old concrete floor by picking, sweeping cleaning and washing down with to remove dust

M&L for non-skid joint free ceramic coloured tiles 7 to 8 mm thick ( square / rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in as in floor etc. set & jointed in neat cement slurry & pointed in white cement to match laid over and including 15 mm thick screed bed or bedding layer of mortar in CM 1:6. complete all as specified and directed

All as per item No 12 above but on vertical surface as dado/ skirting over 10 mm thick rendering as backing coat of mortar in CM (1:4) complete all as specified and directed

M&L glazed ceramic coloured tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over and including 10 mm thick rendering as backing coat of mortar in CM (1:4) as in vertical surfaces complete all as specified and directed

Demolition of brick work built in cement mortar

M & L Brick wk with sub class ‘B’ bricks straight or curved on plan exc. 6m means radius in CM 1:6 complete all as specified and directed

M&L for half brick wall work with old size brick straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 & n exc 4 sqm each, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sq. m each, complete all as specified and directed.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

S&F pressed steel frames for doors of size 105x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified & directed.

M&L Pressed steel frames 125 x 60 mm size of frame for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed

S&F factory made solid PVC Moulded door shutter 30mm thick(stiles) with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back faces,and with particle board core supplying and fixing in frame at site as per specification and drawing.

S&F Glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc using 2nd class hardwood.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed.

M&Lpowder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws, aluminium fittings such as peg stays 150mm long (1 No), hinges type B-21 100mm long (2 No) suitable handle (1 No) complete all as specified and directed

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples.

S&F in repair brass ordinary rat tail rod pattern, 300mm spring incl roller and roller plate complete all as specified and directed

S&F in repair harrison rails,mild steel, chromium plated with fixing brackets, stops, rollers etc.

S&F Aluminium alloy, anodised sliding door bolt of size 300mm with hasp and staple and fixing clips of sheet.

S&F Aluminium anodised barrel tower bolt 150mm long.

S&F Aluminium alloy,anodised handle cast type of size 150mm

S&F Butt hinges medium weight 100mm size,cold rolled mild steel.

S&F in repair Bib taps ,15 mm bore,chromium plated with crutch or capstan headed, screwed for iron pipe or for brass ferrule and fixed.

S&F Pillar taps ,15 mm bore,chromium plated with crutch or capstan headed, screwed for iron pipe or for brass ferrule and fixed.

S&F in repairs 15mm dia concealed type angle stop cock fancy type chromium plated screwed down high pressure, with crutch or capstan headed, screwed both hands for iron pipe or for unions.

Supply and fixing vitreous china squatting pattern 'Orissa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed.

Supply and fixing in repair PVC valveless syphonic action low level flushing cistern of 10 Ltr capacity including flushing pipe bend etc. complete all as specified and directed.

S & F in repair vitreous china wash hand basin, white flat back of size 550 mm x 440 mm including brackets and 32 mm bore dia of dishcharge pipe Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms)and making necessary arrangement for fixing.

S&F PVC waste pipe 32 mm dia and 900 mm long for WHB and Kitchen sink.

S&F in repair 110 mm bore PVC (SWR) pipes single socked in any length with rubber ring joints laid in trenches or in floors .

M&L in repair PVC(SWR) pipes 75mm dia single socketed, in any length with rubber ring joints,laid in trenches or fixed to wall with and including stack and clamp.

M&L PVC (SWR) bend of radius 110mm dia

M&L PVC (SWR) bend of radius 75mm dia.

M&L PVC(SWR) Tee of radius 110mm dia.

S & F PVC(SWR) vent cowel of 110mm dia.

Taking down cement plaster of any description on brick or stone walls/concrete surface etc. including racking out joints, hacking for key, scrubbing down with water etc.

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished even & fair complete all as specified and directed

M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete all as specified and directed

M & L preparation of new plastered surface of wall and applying two coats of oil bound distemper over one coat of primer over a coat of 1mm thick wall care putty complete all as specified and directed

M & L preparation of complete removal of existing treatement from old plastered surface of wall and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty complete all as specified and directed

M&L applying Two or more coats of 100% premium exterior acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness after complete removal of existing treatment on wall surfaces.

M&L applying Two or more coats of 100% premium exterior acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 ltr/10sqm over and including priming coat of exterior primer applied @ 0.90 ltr/10sqm over a coat of plaster of paris putty of 1mm thickness on newly plastered surface of wall surfaces.

M&L, applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of newly steel surfaces of any description over 10cm width or girth not otherwise described.

M&L, applying one coats of synthetic enamel paint including preparation on old steel surfaces of any description over 10cm width or girth not otherwise described.

M&L, applying two coats of synthetic enamel paint over a coat of pink primer including preparation of newly wooden surfaces of any description exc10cm width or girth not otherwise described complete all as specified and directed

M&L, applying one coats of synthetic enamel paint including preparation on old wooden surfaces of any description exc10cm width or girth not otherwise described complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness bedded and pionted in any mortar asin floors, aprons etc.

M&L 18-20mm thick Granite slab (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including circular cutting,chamfering of edges as required over 20 mm thick screed bed or bedding layrer of mortar in CM (1:6) complete all as specified and directed

Demolition of cement concrete (reinforcement) any description and positin not other wise specifically.

M & L RCC (1:2:4) type B- 1using 20 mm graded stone aggregate as in slab supported on wall ,Chajjas,deck slab Shelves/tank staging etc.

Use & waste frame work to sides and soffits of floor or roof slab, chajjas not exc 200 mm thick (Horizontal or sloping) rough finished complete all as specified and directed

M & L Mild steel bars 10mm dia TMT Bars and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with theincluding mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thick (below or above ground level).

M&L 75mm thick PCC type C2 1:3:6 (using 40mm graded stone agg) as in plinth protection/Path/floor finishing surface of concrete topping even and fair without using extra cement complete all as specified and directed

M&L Providing, cement concrete type B.O 1:2:4 (12.5 mm graded aggreate) as in coping etc similar work complete.

M&L PCC type C2 1:3:6 (using 40mm graded stone agg) as in surface channels and drains.

M&L extra forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra, including forms, moulds, mitred/ stopped end etc.

Dismantling water tanks Capacity in Exc 250 & n exc 500 litres and removing to store

S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I

S&F in repairs PVC Ball valves, high pressure, with polythene float & steel rod & fly nut complete, screwed for iron pipe or brass ferrule and fixed 20 mm bore pipe.

S&F in repair Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm bore pipe.

Taking up or down GI tubing and connection including removing to store of 15mm dia complete aall as secified and directed

Supplying and laying 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Taking up or down 20mm dia steel tubing and connection including cleaning for re-fixing or removal from site.

Supplying and laying 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F 20mm CPVC Brass Elbow for 'hot or cold' water supply connection and similar works etc,.

S&F 20mm CPVC Brass Tee for 'hot or cold' water supply connection and similar works etc,.

Cutting chases, pinning in, in brick walls making good to facings where required and pointing in cement mortar 1:3 to concealed water tubing and making not exc 10 cm girth complete all as specified and directed

Cutting holes in brick walls built in cement mortar for inserting hold fast and making good dismantled portion in cm (1:3) or cement mortar 1:2:4 Type B-1 exc half brick but n.exc one brick thick

S & F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm

S&F in repair stainless steel plate rack 1mm thick of size 750X600mm and depth 250 mm , fixed on wall surface as per manufacturer's instruction and making good the surfaces .

Providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 liters per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc complete all as specified and directed

Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site.

Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed.

Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed.

Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades complete all as specified and as directed.

M & L point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following :- (Rate of white Cover plates are deemed to be included in the rate quoted.)

One light point controlled by one, one way switch 5 Amps

One fan point/ exhaust fan point controlled by one, one way switch 5 Amps and regulator

One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same board.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad.

One bell point controlled by one, bell switch 5 Amps

Description all as per item No 88 here in before but using 2.5 sq mm single core copper conductor cable FRLSH of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm FRLSH copper conductor cable PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

S & F Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified

S & F Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified.

S & F Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified.

S & F Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified.

S & F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and as directed.

S & F Bell push modular 6 Amps single module complete all as specified.

S & F Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed

M & L sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit

S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

S & F MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

S & F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed.

M&L refixing the celing fan/ Exhaust fan obtained from above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and as directed.

S & F Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified and as directed. Make Havells , Philips, Bajaj.

S & F LED mirror light 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Havells, Philips.

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make :-Havells Bajaj Philips

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete and provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed.

M& L earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanised earth wire 4mm dia by means of steel bolts, nuts, check nuts and washers all as shown in electrical plate No 3 of MES Schdule Part-I connected to earthing point and testing on completion with and including 15mm bore light grade GI protection pipe (upto 7.5 meter beyond outer edge of earth pit) PCC pit in mix 1:3:6 type C-1 with RCC 1:2:4 type B-1, 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both ways with lifting hook made out of 6 mm dia bar, watering arrangement with funnel and wire mesh and 20 mm bore medium grade GI watering pipe common salt and charcoal filling, necessary excavation and earth work complete all as specified and directed

Supply and replacing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 10 sq. mm 2 core multi -strand including earth work, sand cushioning, bricks for cable protection complete all as specified and directed.

S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. Make :- Bajaj Philips, Havells

M/S SWASTIK HI-TECH BUILDERS PVT LTD

ASSOCIATED BUILDCON LLP