RequiredExperience with Government
RequiredAnnual Turnover
RequiredCertificate (Requested in ATC)
RequiredOEM Authorization Certificate Bid to RA enabled No Wheeled Skid Steer Loader ( 1 ) ( Under PAC ) Make ace Model acess75 Technical Specifications * As per GeM Category Specification Specification Specification Name Values Bid Requirement (Allowed Values) Generic Parameters Self Propelled wheeled machine Yes Yes 1/8 which has front- mounted equipment primarily designed for loading operation (bucket use) and which loads or excavates through forward motion of the machine Conforming to IS/ISO 7131: 2009 Yes Yes Make ACE * Model Number Ace SS75 * Type of loader Wheeled Wheeled Attachment multi-purpose bucket multi-purpose bucket Ignition type Diesel Diesel Aspiration Naturally aspirated Naturally aspirated Number Of Cylinders 3 3 bore (mm) 105 105.0
Required105 stroke (mm) 118 118.0
Required118 displacement (cc) 2196 * Net flywheel power at given engine speed (hp) 2800 2800.0
Required2800 Maximum Engine torque (Nm) 1800 1800 Engine cooling system Air cooled Air cooled Type of fuel DIESEL * Engine location Rear * Drive system Front-wheel drive Front-wheel drive Emission Complaince BS IV BS IV Gross Power (hp) 2800 2800.0
Required2800 Operating Weight (Kg) 2690 2690.0
Required2690 Arm lifting force 11.7 11.7 Operating Speed (kmph) 11.4 11.4 Maximum Speed (kmph) 11.4 11.4 Operating Load Rating 608 608 Wheel Base (mm) 899 899.0
Required899 2/8 Ground Clearance (mm) 213 More than 213.0 Or higher Operating voltage (Volts) 12 12 Alternator Supplied Amperage (Amp) 90 * Operating mass (kg) 2365 2365.0
Required2365 Shipping Mass (kg) 2365 2365.0
Required2365 Certification Parameters Vehicle Certification ARAI/VRDE/ICAT Yes Yes If No
Requiredmention the name of Vehicle Certification agency ARAI * Vehicle Certification name and date CT0EI dt 03.10.2013 * Compliance with pollution standards
Requiredsafety standards of components and road worthiness as per CMVR rules Yes Yes Availibility of test report for the product from Any ILAC/NABl accredited/central government lab to be furnished to buyers on demand Yes Yes Responsibility of Registration with RTO Yes Yes IS 11114 : 2006 Earth-moving machinery - Definitions of dimensions and codes: base machine Yes Yes IS 11114 : 2006 Earth-moving machinery - Definitions of dimensions and codes: Equipment and attachments Yes Yes IS/ISO 6165 : 2012 Earth moving machinery - basic types - Identification and terms and Yes Yes 3/8 definitions IS 13116 : 2006 Earth-moving machinery -Engine Test Code - Net power Yes Yes ISO 3450: Earth Moving Machinery -Braking systems of Rubber-tyred machines -Systems and Performance requirements and test procedures Yes Yes IS13116 : 2006 Earth- moving machinery -Engine Test Code - Net power Yes Yes Constructional Parameters Overall length with attachment 2435 * Overall operating height 2110 2110.0
Required2110 Bucket capacity 0.4 * dump angle (degree) 40 * dump height 2290 * maximum dump height when clam open 2400 * maximum dump height when clam closed 3900 * Maximum dump height
Requiredside 2380 * Rollback (specifiy height) 3900 * Maximum rollback at ground 2100 * carry position 2031 * maximum rollback at carry position 2100 * Minimum turning radius with bucket in carry position 2219 * digging depth 400 * bucket width 2280 * maximum grading angle 30 * Operating load 608 608.0
Required608 4/8 breakout force 1700 * machine clearance radius 440 * TURNING RADIUS FROM CENTER - MACHINE REAR 440 * TURNING RADIUS FROM CENTER - INC BUCKET 440 * Type of transmission hydrostatic hydrostatic Number Of forward speed 4 * Number Of Reverse speed 2 * Maximum forward travel speed (kmph) 4.8 * Maximum reverse travel speed (kmph) 5.8 * Hydraulic pump system type As Per ISO Norms * Hydraulic pump flow at given pressure (l/h) 123 * Hydraulic pump flow at given speed (l/h) 100 * Maximum normal hydraulic system operating pressure 190 * Hydraulic system fluid capacity 142 * Type of filteration system As per ISO norms * Type of final drive 17.8 * Type and actuation system of the service brake Yes * Type and actuation system of the parking brake Yes * Type of Driving Axle Hydrostatic Hydrostatic Steering system Front-Wheel Steer Front-Wheel Steer
RequiredRear Wheel Steer
RequiredAll- Wheel Steer
RequiredArticulated Steer
RequiredWheel-skid Steer Type of tyre BIAS * Size of tyre 9*16-16PR * 5/8 Tyre tread 16 * Tyre Ply rating 16.9x28-12 PR * Rim Size AS per ISO Speci * Fuel tank capacity 54.5 54.5 cooling system fluid capacity 4 * hydraulic tank fluid capacity 123 * Engine crankcase capacity 100 * final drive case capacity 212 * pump drives capacity 123 * Height to hinge pin
Requiredfully raised 100 * Overall operating height when fully raised 5600 * Maximum scarifier lift height 2300 * Performance Parameters Net Engine Power 51 51.0
Required51 Tipping load at maxiimum reach (KN) 2449 2449 Lift capacity to maximum height 2781 2781.0
Required2781 Rated operating capacity 608 608.0
Required608 Breakout force 12.7 12.7 raising time 2.55 2.55 Lowering time 60 * Dump time 60 * Maximum travel speed (kmph) 10.8 10.8 Braking performance As per ISO para * Turning radius 333 * Warranty time 12 12.0
Required12 Operating hours during warranty period 1000 0.0
Required1000 Battery warranty 12 12.0
Required12 Number Of Free services 5 5 6/8 Transportation charge (Rs) 0 * Maintenance cost for first 5000 Hrs 0 * Self-propelled crawler machine which has front-mounted equipment primarily designed for loading operation (bucket use) and which loads or excavates through forward motion of the machine Yes * * Bold specifications are the golden parameters. * Bidders may note that In respect of non-golden Parameters
Requiredthe specifications 'Values' chosen by Buyer will generally be preferred over 'Bid requirement ( allowed Values) by the Buyer.
