Providing BT Patches at Avaniapuram Sempoorani Main Road for Avaniapuram Jallikattu 2026 in Ward No.100 Zone 5

Amount

Preparing the Existing surface to laying the road to Proper Gradient and remove the loose soil withou tdamage the Water Supply and other Pipelines.The Rate inclusive of all charges such as Earth work and remove the same away from the site etc,complete as per standard specifications.

Providing and laying ,spreading and compacting 0.396 m3 of 45-22.40mm & 0.528 m3 of 22.40-2.36mm & 0.396m3 of 2.36mm and below metal graded stone aggregate to wet mix macadam (WMM ) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying prime coat of 7kgs/10sqm over the WMM surface treated with primer using 7kgs of bituminous emulsion binder including labour charges for applying the required quantity binder as prime coat manually etc complete as per 502 of MORTH rev V specification

Providing and laying prime coat of 2.5kgs/10sqm over the WMM surface treated with primer using 2.5kgs of bituminous emulsion binder including labour charges for applying the required quantity binder as prime coat manually etc complete as per 502 of MORTH rev V specification

Providing and laying tack coat of 2kgs/10sqm over the BT surface treated with binder using 2kgs of bituminous Emulsion (RS) for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc.,complete as per 503 of MORTH Specifications

Providing and laying Bituminous Concrete to 30mm thick/40mm tk using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory/Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, paver finisher / 9m paver finisher, vibratory / pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Add GST 18%

SASI BUILDERS (BID ID -1544207)