REPAIR MAINT OF INTERNAL ELECTRIFICATION, DG SET, SUMMER APPLIANCES, STREET / SECURITY LIGHTS AND ALLIED WORKS AT CHAUHTAN HILL TOP UNDER GE (AF) UTARLAI.

Amount

Supplying, fixing and testing in replacement of Street lights LED type 45W pressure die cast aluminium housing luminaires complete including taking down old u/s street light any type as directed by Engr-in-Charge.

Supplying, fixing and testing in replacement of Street lights LED type 60W pressure die cast aluminium housing luminaires complete including taking down old u/s street light any type as directed by Engr-in-Charge.

Supplying, fixing and testing in replacement of Flood lights LED type 120W pressure die cast aluminium housing luminaires complete including taking down old u/s street light any type as directed by Engr-in-Charge.

Decarburizing /cleaning complete LT 415 Volts 3 phase panel/ bus bar chamber with electrical connections, complete bus bar from the bus bar chamber, cleaning and ensure proper decarburizing, refixing the same after applying Backtol Red solution to the bus bar insulator & checking all the connections, tightening the nuts, bolts & thimbles of in-coming/out-going system complete incl replacement of defective rusted bolts & nuts all as specified and directed.

M&L for painting on out door/ indoor LT panels/Bus bar chamber, with removing rust by wire bushes, applying painting of panel surface of any description using synthetic enamel paint of two coats by using spray gun after preparation of old painted surfaces complete all as directed

Supply and fixing in replacement of MCCB 4 pole, 415 V, 160 Amps, 16 KA with thermal and magnetic releases including necessary modification in the panel complete including taking down old u/s MCCB any type all as specified and as directed. Make: Legrand/L&T/Havells/Indoasian

Supply and fixing in replacement of MCCB 4 pole, 415 V, 100 Amps, 16 KA with thermal and magnetic releases including necessary modification in the panel complete including taking down old u/s MCCB any type all as specified and as directed. Make: Legrand/L&T/Havells/Indoasian

Supply & Laying in replacement in trenches or fixing on wall or passing through pipe or in cable ducts, 1100 volts grade 3.5 core XLPE armoured, electric power cables (heavy duty) with aluminium conductor of the following size . Note: The rate quoted will be inclusive of termination at ends with suitable aluminium lugs wherever required and taking down old u/s cable any size and type.

16 sqmm 4 core

35 Sqmm 3.5 Core

Excavation in trenches not exceding 1.5m wide and not exceding 10.0 sq m on plan and not exceding 1.5m depth and getting out soft soil.

Returing filling in including spreding leveling watering and well ramming in layer not exceding 25 cm as in soil all as specified and dirceted.

Removing excavated material not exceding 50 m and depostingwhere directed at a level not exceding 1.5 m above the starting point.

M & L for sand cushioning all around the cable for protection by natural tibba sand

Supplying and Laying stone patti 40-50 mm thick, 25- 30 cm wide abutting each other for cable protection

Supplying, fixing and testing in replacement of Fos lighting guiding of ornate bollard & downward lamp 40 W including PCC block 300mmx300mmx150mm and connected items.Complete including taking down old u/s street light any type as directed by Engr-in-Charge.

Supplying, fixing and testing in replacement of lighting guiding of bollard 40 W including PCC block 300mmx300mmx150mm and connected items.Complete including taking down old u/s street light any type as directed by Engr-in-Charge.

Supplying, fixing and testing in replacement of LED polycarbonate cylindrical tube 10 W trim nxt panel LED light . complete including taking down old u/s street light any type as directed by Engr-in-Charge.

S&F Square shaped recess/suspended mounted environment friendly new generation asthetically ultra modern with high brightness LEDs as light source LED Flat panel, 36 watt, 2'x2'size, complete with driver and all accessories and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6.0 sq mm 2 core.

Supply, laying, fixing or passing through pole from junction box to street light connection, 1100 volts grade heavy duty cable with PVC solid insulated aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 4 Sqmm 2 core nominal cross section complete all as specified and directed.

S&F 1100 volts grade heavy duty flat twin core cable PVC insulated with stranded aluminium conductor of size 10 sqmm and overall PVC sheathed in service connections complete all as specified and directed.

S&F Post top energy saving , environmental friendly, aesthetically designed with indirect symmetrical light distributio, die-cast aluminium IP-65 luminaire with high power COB LED as light source of capacity 15/20 Watt, 6500K complete all as specified and as directed by Engr-in-charge. Make Havells / Philips/ CG

S&F GI tubing 50mm bore medium grade, cut to pieces 1.5 mtr long for mounting of post top lantern independently at places or at top of gate/pillar and including grouting in PCC as per site requirement complete all as specified and directed.

M&L for monthly 'A' Check Inspection of DG sets of capacities as described in Ser Item No. 2.00 to 25.00 including alternator, electric panel board connection to DG set etc for smooth functioning and carrying out maintanance as required at site and directed by Engr-in Charge. Note: Items/ Spares required shall be measured and paid separately under respective item of BoQ (i) Checking engine oil level and topping up as and when required. (ii) Checking and adjusting the belt for tension and replacement of belt if required. (iii) Checking of oil bath air cleaner level (iv)Checking of exhaust system for leakage (v) Draining of sediment from fuel filter and fuel tank (vi) Cleaning of air cleaner elements (vii) Checking engine alternator coupling, mounting bolts and alignment (viii) Tighting all nuts, bolts, in altenator terminal block (ix) Checking of alternator carbon brushes and connections in alternator (x) Checking and tightening of all connection in DC control wiring. (xi) Checking of all radiator rubber hoses for leakage and replacement if required. (xii) Checking and recording oil pressure, water and oil temperarute for smooth functioning. (xiii) Checking anti vibration mounting pads for any deformation. (xiv) Checking throttle linkage for smooth operation. (xv) Checking battery for cell test, electrolyte level, gravity and topping up to required level (xvi) Routine check / repair work of panel, switches, MCCBs, main switch, all contactors, engine control unit etc. (xvii) Checking of AMF panel, all electrical connections etc. (xviii) Checking of earthing resistance (xix) Cleaning of vegitation around the DG set up to 1.5 mtr area. (xx) 'A' Check Service shall be carried out as described in ser No. 2.00 to 25.00

320 KVA Capacity, Make : Cummins, Location : Chauhtan Hill Top

100 KVA Capacity, Make : Ashok Layland, Location : Chautan Base

15 KVA Capacity, Make : Cummins, Location : Chauhtan Base

M&L for 'B' Check once in Six month OR 250 Hrs running whichever is earlier DG sets of capacities as mentioned under respective item of BOQ, inspection, maintenance and serviceing including alternator, electric panel board connection to DG set etc for smooth functioning and carrying out maintenance as per OEM instructions and as directed by Engr-in-Charge. Note: (i) 'B' Check Service shall be carried out as described in respective item of BOQ (ii) Items/ Spares including 'B' Check kit, coolent, lubricating oil required shall be measured and paid separately under respective item of BoQ (i) Repeat the activities of 'Á' Check services (ii) Replacment of lubricant oil. (iii) Replacing lubricant oil filters element with O rings (iv) Replacing fuel filters element with O rings (v) Replacing air filter elements with O rings (vi) Replacing coolant.

320 KVA Capacity, Location : Hill Top

100 KVA Capacity, Location : Base

15 KVA Capacity, Location : Base

Supply only 'B' check kit for DG set of following capacities as mentioned in respective item of BOQ. Note : It includes oil filters (1.00 Ltr/0.5 ltr), Diesel filters and air filters inner and outer as recommended by OEM

320 KVA Capacity, Location : Hill Top

100 KVA Capacity, Location : Base

15 KVA Capacity, Location : Base

Supply only coolent, K cool super plus 50-50 Premix

Supply only Battery water with electrolyte mix

Supply only Engine oil 15 W 40 turbo synthetic superior quality engine oil

Supply only radiator hose pipe set with clamps suitable for DG set of capacity 15 KVA

Supply only radiator hose pipe set with clamps suitable for DG set of capacity 100 KVA

Supply only fan belt set suitable for 15 KVA

Supply only fan belt set suitable for 100 KVA

Supply only fan belt set suitable for 320 KVA

M & L for complete checking of AMF panel, finding the fault, servicing complete including replacement of unserviceable spares with necessary wiring and testing complete for manual & Auto operations all as directed. (Note:- Items required for replacement are deemed to be included in the quoted rate

Repair to charging alternator assembly including replacement of carbon brushes and bushes complete and refixing all the components in position with necessary screws, nuts & bolts complete all as directed.

M & L for leakage rectification of radiator, cleaning, pressure testing complete as required and directed.

M & L for replacement of unserviceable contactor 220 V AC supply ,4 pole suitable for the following capacity of DG set 320 KVA AMF panel.complete as required and directed.

Diesel tank cleaning .complete as required and directed.

M&L in replacement of solenoid switch for use of engine stop of AMF panel of any make and capacity.

S&F in replacement of fuel feed pump of DG set engine as per existing make,model and capacity.Complete all as directed by Engineer-in -Charge.

M & L for servicing of split type AC of capacity 1.5/2.0 TR of any by opening the outdoor unit fixed on roof top and Indoor unit fixed inside the building, and cleaning the complete outdoor unit and indoor unit including fins, checking of refrigerant standing pressure, topping of refrigerant upto the required level, complete all as directed by Engineer-in-Charge. Note : Refrigerant required for topping (R22 / R-32/R-134/ R410(a) shall be maesured and paid for separately as "supply only rates" under respective item of BOQ here-in-after

Supply only of Refrigerant gas R 22/ R-134/ R-410(a) in cylender complete all as specified and directed

S&F in replacement of Blade for condensing fan motor of split AC capacity 1.5/2.0 TR

S&F in replacement of blower of indoor unit of split AC capacity 1.5/2.0 TR

S&F in replacement of condensor fan moter of split type AC suitable for 1.5/2.0 Ton capacity of make Carrier / Hitachi / Voltage / Blue star, complete all as specified and directed.

S&F in replacement of blower fan moter of split type AC suitable for 1.5/2.0 Ton capacity of make Carrier / Hitachi / Voltage / Blue star, complete all as specified and directed.

S&F in replacement of rotary Compressor (Sealed Unit) of window / split type AC 2 TR capacity, single phase, 220 volt of make Kirloskar / Tecumseh / Carrier/Voltas including necessary modification of foudation as required to suit the compressor, vacumisation, pressure testing, leakage rectification including gas charging R-22/134 & testing complete complete all as specified and directed.

S&F in replacement of rotary sealed Compressor (Sealed Unit) of window / split type AC 1.5 TR capacity, single phase, 220 volt of make Kirloskar / Tecumseh / Carrier/voltas including necessary modification of foudation as required to suit the compressor, vacumisation, pressure testing, leakage rectification including gas charging R-22/134 & testing complete all as specified and directed.

S & F in replacement of wiring kit of split type AC complete with lugs, thimble complete all as directed.

S & F in replacement of Running Capacitor 45/50 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 6 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 2.5 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 4 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 1.5 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 2 Mfd all as specified and directed.

S & F in replacement of Running Capacitor 3 Mfd all as specified and directed.

S & F in repairs PCB unit of split AC indoor unit of Capacity 1.5/2 TR as per existing make and model, removing old PCB sensor and refix with new PCB of same make & capacity and model in the same position complete all as directed by Engr in Charge.

S & F in replacement of plug and socket outlet industrial type 250 Volts with MCB SP 20 AMP complete all as specified and directed.

Material and labour for cleaning and painting to old steel surfaces of Desert cooler with two coats of synthetic enamel spray paint over one coat of red oxide on external surface & two coats of anti corrosive black paint inside the Body tank & side grills over a coat of Red Oxide primer including scraping/rubbing with wire brush on old surface of Desert cooler. and writing of MES NO etc complete all as specified and directed.

S&F in replacement Desert Cooler fan motor kit inlcuding steel blades of same make of capacity 200 Watt, speed, 1400 RPM single phase complete all as specified and directed. Cromption model No 500MMCKM-Mark1 and equivalent in Khaitan/Havells

S&F in replacement of water lift submersible pump plastic body of 18 Watts 220-240 Volts AC Supply single phase complete all as directed by Ein- Charge .

S&F in replacement of wood wool pad (set of three), minimum weight 0.60 Kg, fixed in side panels of desert coolers including GI wire mesh of 20 gauge wire and mesh size 100x100mm complete all as specified and directed.

S&F in replacement side penal (shutter) made out of 20 gauge PGI Sheet with suitable hand grip,and supporting jali of wood/wool chips pad set made out of hard MS wire and fitted in side louvers including painting to match with the existing desert cooler complete.

S&F in replacement of 20mm size of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed including nipple and fixing accessories complete all as specified and directed.

S&F in replacement of 5 A switch piano type suitable for submersible pump of capacity 40Watt for desert cooler all as specified and directed.

Supply and fix in replacement of copper condensing coil for split AC 1.5/2.0 Ton as per existing make and model complete all as specified and directed

Fabricating & Fixing Canopy made out of MS angle iron 40x 40 x 5 mm with GI sheet roofing of suitable size for 2 / 1.50 Ton Cap split A/C Condensor unit duly fixed on window slab/ out side external wall/ building roof of on ground with proper hold fast with PCC. Angle iron frame duly painted with two coats of black synthetic enamel paint over a coat of red oxide and all as directed.

Shifting of Split type AC indoor and out door unit of any TR capacity all as direction by Enger -in- charge

Taking down u/s perished point wiring any type for light/fan/socket/power with all fittings and fixtures,tube lights complete including making good the disturbed surfaces complete all as specified and as directed

Material and labour for point wiring complete with 1.5 sqmm single core multistandard copper conductor fire resistant low smoke and low halogen (FRLS) PVC insulated and unsheathed cable 1100 Volts grade conforming to IS-694 drawn through non metallic rigid PVC heavy duty conduit in concealed (min 20mm dia (external) but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8mm including conduit accessories like bends, tees, junction boxes etx fixed concealed/recessed in wall or ceiling etc including 1.5mm FRLS PVC insulated unsheathed copper earth wire including sunken type pressed steel terminal boxes electro plated of suitable size with bakelite white/colored top sheet cover 3.0mm thick for :-

One light point controlled by one way switch.

One Ceiling Fan/Wall Mounted Fan/Exhaust Fan Point controlled by one way switch

One 3 pin 6 Amps socket outlet on same board

One 3 pin 6 Amps switch socket out on indipendent board

All as per tem Sl No-1 but with two run of 2.5 sqmm single core multistranded copper conductor for phase and neutral, and one 2.5 sqmm single core multistranded copper conductor for earth contunity conductor.

Taking down carefully U/S by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings, tube rods and regulators, etc. complete all as specified and directed.

M&L switch 5 Amp piano flush type single pole one way complete all as specified and directed.

M&L switch socket combination flush type 5 Amps, 2/3 pin multipurpose complete all as specified and directed.

M&L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings

M&L for replacement of LED lamp 9 Watt more than 120 lumen per watt efficiency complete all as specified and directed. Make : Havells/Crompton/Syska/Orient

M&L switch/socket combination outlet 2 in 1, 3 pin 5 Amps and 15 Amp flush type (Multi purpose) piano type AC 230 Volts.

M&L stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc as required complete all as specified and directed.

M&L ceiling rose three terminal AC 230 volts complete all as specified.

S&F Modular switch 1 way 6A, 1 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F Modular white cover plate with frame 6 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F Modular white cover plate with frame 2 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F Metal flush box 2 module complete all as specified and directed. Make : Legrand/Phillips/Havells

S&F Metal flush box 6 module complete all as specified and directed. Make : Legrand/Phillips/Havells

M&L LED tube light fitting 1 x 20w, 230v including LED (tube rod), 4 feet batten fitting fixtures, complete with all accessories internally pre-wired and including connecting up with three core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

M&L LED tube light fitting 1 x 10w, 230v including LED (tube rod), 2 feet decorative ultra slim LED fixture with high lumen output, environment friendly energy efficient complete with all accessoires pre wired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed.

M&L LED tube rod 20w, 230v 4 feet complete all as specified and directed.

Taking down ceiling fan of any make & sweep by disconnecting clips, lock nuts etc. from existing position of any height in safe custody for repair & maintenance, complete all as specified and directed. (Note :- Repair & maintenance shall be paid saperately under relevant items)

Hanging only ceiling fan 1200mm/1400mm sweep after repair & maintenance with existing down rod, shackle, canopy, clips, lock nuts etc complete all as speficied and directed.

M&L for painting of ceiling fan complete, in situ/lying in store with synthetic enamel paint (white colour) by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.

M&L for removing of old burnt winding wire of fan any type and rewinding the stator with suprior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as specified and directed.

S&F in replacement of bearing for ceiling fan 1200mm/1400mm sweep ISI marked complete all as specified and directed. NBC/SKF or equivalent

S&F in replacement of gun metal bush for ceiling fan 1200mm/1400mm sweep complete all as specified and directed.

S&F in replacement of rubber shackle and split pin with galvanised clamp complete with nuts, bolts and washers complete all as specified and directed

Taking down exhaust fan of any make & sweep and size from existing position of any height for repair, maintenance and refixing the same after necessary repair complete all as directed. Note : The defective parts to be replaced and shall be measured and paid separately under relevant item of Sch. (ii) cost of minor items i.e., Screws, nut & bolts etc shall be deemed to be included in the above item.

S&F in repair ball bearing (ISI mariked) for exaust fan of 450mm sweep capacities

S&F in repair ball bearing (ISI mariked) for exaust fan of 300/380mm sweep capacities

M&L for removing of old burnt winding of exhaust fan 450mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as directed and specified aby Engr-in-Charge. Note : Cost of dismentling all components of exhaust fan, greasing, re-assembling and complete testing shall be included in the quoted rate.

M&L for removing of old burnt winding of exhaust fan 300/380mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as directed and specified aby Engr-in-Charge. Note : Cost of dismentling all components of exhaust fan, greasing, re-assembling and complete testing shall be included in the quoted rate.

M&L for removing of old burnt winding of flame proof exhaust fan 450mm sweep motor and rewinding the same with superior quality super enamelled copper wire of suitable size including insulation, drying after varnishing complete all as directed and specified aby Engr-in-Charge. Note : Cost of dismentling all components of exhaust fan, greasing, re-assembling and complete testing shall be included in the quoted rate.

S&F in repairs of capacitors 3.15mfd ISI marked complete all as directed.

S&F in repairs of capacitors 4 mfd ISI marked complete all as directed.

Supply and fixing in replacement MCB SP, 6 to 32 Amps 10 KA single pole AC 230 volts 'B' curve complete all as specified

Supply and fixing in replacement MCB SPN 6 to 40 Amps 10 KA AC 230 volts 'B' curve complete all as specified

Supply and fixing in replacement MCB TPN 63 Amps 10 KA AC 230 volts 'B' curve complete all as specified

S/F in replacement of Sheet metal enclosures for fixing MCBs Single pole and neutral 8 way, 240 volts with 200 Amps rated bus bar with double door fixed on flush to the wall including making the hole in the wall and fixing the DB including cement work and plastering complete all as directedMake: C&S,LEGRANDSor equivalent

S/F in replacement of Sheet metal enclosures for fixing MCBs TPN 4 way, 240 volts withe 200 Amps rated bus bar withe double door fixed on flush to thee wall including making the hole in the wall and fixing thee DB including cement work and plastering complete all as directed Make: C&S,LEGRANDS or equivalent

M/L in replacement of submain wiring with 3 runs of 4.0 sqmm single core FRLS PVC insulated stranded copper conductor cable drawn through rigid non metallic PVC conduit with one run of 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and necessary connections all as directed. Note : 3 runs of 4 sqmm FRLS PVC insulated unsheathed copper conductor PVC insulated unsheathed copper conductor and 1 run of PVC conduit of size 20 mm will be measured as single run

M&L in replacement of Earthing complete with 600x600x6.00MM thick GI earth plate electrode burried directly in ground not less than 2.25 mtr below GL with the top edge of the plate at a depth not less than 1.5 mtr from GL, connected to GI earth lead wire of 4.0 mm dia by means of nuts, bolts, washers, checknuts etc, made out of galvanised iron or steel, earth wire protected by galvanised iron pipe 15mm dia, connected to main switch board complete including necessary earth work,excavation,PCC chamber, watering pipe, funnel, wiremesh, RCC chamber cover etc all as specified and directed.

Supply and fix in replacement of FLP/WP switch 16 Amp, 250V single pole ON/OFF rotary type with termination box in LM6 all as specified and directed by Engr-in-Charge.

Material and labour for repair of fire alarm panel to include burnt transformer, Ics, multi chips etc complete all as specified and directed.

Supplying, fixing and testing in replacement of Gate top light 24x0.5 W decorative LED post top warm white of Jaquar model Orbiss Gate Top or equivalent in Philips / Osram including taking down old u/s post top lantern any type complete all as specified and directed.

S&F in repairs of capacitors 2.5 mfd ISI marked complete all as directed.

S.K. INFRASTRUCTURE (BID ID -3394727)

RAMDEV ENTERPRISES (BID ID -3394915)

Devi Engineeing (BID ID -3394817)

M/S Tanisha Traders (BID ID -3395109)

Lalit and Brothers (BID ID -3394876)